How to ignore the selection criteria temporary page in print

Hi Experts,
I use 2007A and when i would like to print example a Trial Balance then the system prints the selection criteria on the first printed page .
How can I delete or ignore this option? There's no need for this print.
I was searching in help files but with no success.
Thanks,
Eszter

In Administration > System Initialization > Print Preferences > General Tab
There is a checkbox for "Print SAP Business One Generation Message"
Uncheck it to not print the first page with selection criteria.
Hope this was what you were looking for.

Similar Messages

How to get the total no of pages during printing of initial page

In sapscript, I am able to print "page 1 of 4,...".
In ABAP list, how can I do that?
Thanks
Bye

Hi Colin,
you can use this:
&SAPSCRIPT-FORMPAGES&*
Total page number based on the current output layout set:
&SAPSCRIPT-JOBPAGES&*
Total page number based on all output layout sets created with the function modules OPEN_FORM, START_FORM .. ENDFORM, START_FORM .. END_FORM, ..., CLOSE_FORM
This info is shown in this link:
[http://help.sap.com/saphelp_45b/helpdata/EN/6c/897415dc4ad111950d0060b03c6b76/content.htm|http://help.sap.com/saphelp_45b/helpdata/EN/6c/897415dc4ad111950d0060b03c6b76/content.htm]

How make default values in the selection criteria of BEx query????

Hi all
I have to create a brand new query, in the selection criteria(Prompts) I have two prompts. one prompt should show current budget year and second prompt should show next budget year, both prompts are mandatory and default.
Can any one please let me know how to obtain current and next budget year??? do I need to write any customer exit or do i need to create a offset???
Two prompts are using same infoobject 0fiscper which is mapped to ECC Table MBEW and field is LFGJA.
Thanks

HI sathiyaa,
so you want to show user with two prompts one will show current year and the other next year value by default.
//tell me that if you user change the current year value for ex: it will show 2011 by default.. and user changed it to 2009.
you want to show 2009 year results or 2011 even though he changed the prompt.
Here i'm considering that even though user changed current year to some other year still you want to show the current year results.
Create a customer exit variable for calyear with ready for input (checked).
customer exit code in CMOD :
when ' customer exit var for cal year'
IF I_step = 1.
clear l_S_range.
l_S_range-low = sy-datum+0(4).
l_s_range-sign = 'I'.
L_s_RANGE-opt = 'EQ'.
ENDIF.
if i_step = 2.
data: zyear(4) type c.
zyear = sy-datum+0(4).
ex: l_s_range-sign = 'I',
l_s_range-opt = 'EQ'.
L_s_range-low = zyear.
appen l_s_range to e_t_range.
after this create a variable offset
create a new selection in the structure, drag the KF and calyear restricted by current year variable . Copy the same selection and insert it as a new selection, go back to the calyear restriction, right clik on the variable. specify variable offset and enter + 1.
or search in sdn how to create variable offset it will help you
Regards,
Ranganath.

WAD - How to create the variables to have the selection criteria

Hi all,
I am trying to display a BW Statistics query in 'Chart' with Web Application Designer (WAD). I want to have the selection criteria with variable USER ID ('ABC123'), Info Cube ('Z_FIGL_C01') and Time Period '01/01/2005' to '12/31/2005'. How can I have this selection criteria in Web Application Designer, PLEASE ?.
Thanks.

Venkat,
Yes, It's possible.
I think in the menu options.. there tools--> create Table(it's not Table Web Item web item). May be similar option. we need to create the Table. Right now i don't have the system. you need to keep the 2 Drop Down Boxes in the Table(in the 2 coloumns).
All the best.
Regards,
Nagesh Ganisetti.

ADF FACES: how to preserve the sort criteria for an af:table

How can I preserve the sort criteria on an af:table across page invocations? I've searched all through the forum and I don't see anything on this topic.
I simply want the sort criteria (from when the user clicks on a column header) to be remembered across multiple uses of the page. I know that the control handles this itself for multiple invocations of the same page (like when you page through the table). But I need to preserve the sort order so I can install it again when someone leaves the page and then returns to it.
I've tried various attempts using a SortListener to record the sort criteria, but I can't figure out how to reinstall the criteria without generating exceptions from the table control.
Any pointers on how to do this would be greatly appreciated.
Thanks.
Larry.

Ok, I've solved the problems with the odd behavior by always creating a new model when the table data changes and copying the sort criteria into the new model, like this:
        // Construct our own CollectionModel from this result set
        if(_model == null) {
            // Construct the initial data model and set the starting sort criteria
            ListDataModel m = new ListDataModel(results);
            _model = new SortableModel(m);
            // Set the sort criteria to last name
            ArrayList criteria = new ArrayList();
            criteria.add(new SortCriterion("lastName", true));
            _model.setSortCriteria(criteria);
        } else {
            // Construct a new model so the table "sees" the change
            ListDataModel m = new ListDataModel(results);
            SortableModel sm = new SortableModel(m);
            sm.setSortCriteria(_model.getSortCriteria());
            _model = sm;
        }But, I end up with one final thing that doesn't work. In the "then" clause above, I try to set the initial sort criteria for the table - it has no effect. When the table is rendered, it is not sorted in any way.
How can I specify an initial sort order for the table? Why is it ignoring the sort criteria on the model?
Thanks.

How to use the select option to get the multiple bom explosion

hi friends,
          i have completed the bom exp using parameters to get one material
input,but i need to adopt select option to give from and to materials
i ll gives from and to materials with description and bom deails
i here gave the coding also, pl give me a suggestion how to adpot the select
optoins instead of parameters ,very urgent
REPORT PP_BOM_EXPLOSION.
tables :mara,marc,stpo.
TYPE-POOLS : SLIS.
*parameters: p_werks like t001w-werks obligatory.
SELECT-OPTIONS : p_matnr FOR mara-matnr obligatory.
**select-options : p_matnr for mara-matnr obligatory.
PARAMETERS : P_WERKS LIKE T001W-WERKS OBLIGATORY,
        P_MATNR LIKE MARA-MATNR OBLIGATORY.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
matnr like mara-matnr,
maktl like makt-maktx,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data : topmat like cstmat.
data: w_topmat like cstmat.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
start-of-selection.
perform explode_assembly.
PERFORM BUILD_FIELDCATALOG.
PERFORM DATA_DISPLAY.
*end-of-selection.
*perform write_report.
*top-of-page.
*perform print_header.
*form print_header.
*write: /(18) 'Component'(h00),
*(40) 'Description'(h01),
*'Mat.Group'(h02),
*(18) 'Quantity'(h03).
*uline.
*endform.
*form write_report.
*write: / w_topmat-matnr under text-h00 color col_heading,
*w_topmat-maktx under text-h01 color col_heading.
*loop at it_comp.
*write: /
*it_comp-idnrk under text-h00,
*it_comp-ojtxp under text-h01,
*it_comp-matkl under text-h02,
*it_comp-menge unit it_comp-meins under text-h03,
*it_comp-meins.
*endloop.
*uline.
*endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
SELECT MATNR FROM MARA INTO CORRESPONDING FIELDS OF TABLE IT_MARA
                           WHERE MATNR IN P_MATNR.
Explode highest level:
*LOOP AT IT_MARA.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = P_MATNR
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
exit.
endif.
Don't process documents
delete it_stb where idnrk is initial.
Don't process valid from furure:
delete it_stb where datuv >= sy-datum.
Explode phantom assemblies up to last level
*do.
it_stb2[] = it_stb[].
*delete it_stb2 where dumps is initial.
*if it_stb2[] is initial.
*exit.
*endif.
*delete it_stb where not dumps is initial.
delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
loop at it_stb2.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
auskz = c_x
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = it_stb2-idnrk
werks = p_werks
tables
stb = it_stb3
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
else.
delete it_stb3 where idnrk is initial.
delete it_Stb3 where sobsl = 50.
loop at it_stb3 .
multiply it_stb3-menge by it_stb2-menge.
modify it_stb3 transporting menge.
endloop.
append lines of it_stb3 to it_stb.
endif.
*ENDLOOP.
endloop.
*enddo.
Build table of components collecting the same components from
all levels
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_OUTPUT'
    EXPORTING
    INPUT                = IT_STB-MEINS
    LANGUAGE             = SY-LANGU
    IMPORTING
LONG_TEXT            =
   OUTPUT               = IT_STB-MEINS
SHORT_TEXT           =
EXCEPTIONS
   UNIT_NOT_FOUND       = 1
   OTHERS               = 2
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
*READ TABLE IT_COMP INDEX 1.
*IF SY-SUBRC = 0.
IT_COMP-MATNR = w_topmat-matnr.
IT_COMP-MAKTL = w_topmat-maktx.
INSERT IT_COMP index 1.
*ENDIF.
ENDFORM.
FORM TO APPEND DATA INTO ALV FORM
FORM BUILD_FIELDCATALOG.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
*loop at it_comp.
   PERFORM BUILD_FIELDCAT USING 'MATNR' 'Material'.
PERFORM BUILD_FIELDCAT USING 'MAKTL' 'Material Description'.
PERFORM BUILD_FIELDCAT USING 'IDNRK' 'Component'.
PERFORM BUILD_FIELDCAT USING 'OJTXP' 'Description'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Material Group'.
PERFORM BUILD_FIELDCAT USING 'MENGE' 'Quantity'.
PERFORM BUILD_FIELDCAT USING 'MEINS' 'Unit Of MEASUREMENT'.
*endloop.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
CLEAR WA_FIELDCAT_LN.
ADD 1 TO S_COL_POS.
WA_FIELDCAT_LN-REF_TABNAME = 'IT_COMP'.
WA_FIELDCAT_LN-FIELDNAME    = L_FIELDNAME.
WA_FIELDCAT_LN-SELTEXT_M    = S_TEXT.
WA_FIELDCAT_LN-COL_POS      = S_COL_POS.
WA_FIELDCAT_LN-QFIELDNAME   = SPACE.
WA_FIELDCAT_LN-HOTSPOT      = SPACE.
WA_FIELDCAT_LN-JUST         = 'R'.
APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM DATA_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = TEXT-001
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = IT_FIELDCAT
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_COMP
   EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Thanks in advance
                                                                                Regards
senthilkumar D

tables :mara,marc,stpo.
parameters: p_werks like t001w-werks obligatory.
*p_matnr like mara-matnr obligatory.
*select-options : p_matnr for mara-matnr obligatory.
select-options : P_matnr for mara-matnr.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data: w_topmat like cstmat.
data : begin of itab occurs 0,
        matnr like mara-matnr,
        end of itab.
*data : itab type table of mara with header line.
start-of-selection.
perform explode_assembly.
end-of-selection.
perform write_report.
top-of-page.
perform print_header.
form print_header.
write: /(18) 'Component'(h00),
(40) 'Description'(h01),
'Mat.Group'(h02),
(18) 'Quantity'(h03).
uline.
endform.
form write_report.
write: / w_topmat-matnr under text-h00 color col_heading,
w_topmat-maktx under text-h01 color col_heading.
loop at it_comp.
write: /
it_comp-idnrk under text-h00,
it_comp-ojtxp under text-h01,
it_comp-matkl under text-h02,
it_comp-menge unit it_comp-meins under text-h03,
it_comp-meins.
endloop.
uline.
endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
select matnr from mara into table itab where matnr between p_matnr-low and p_matnr-high.
loop at p_matnr.
itab-matnr = p_matnr-low.
   append itab.
   itab-matnr = p_matnr-high.
   append itab.
   clear itab.
   endloop.
Explode highest level:
loop at itab.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = itab-matnr
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
exit.
*else.
endif.
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
endloop.
endform.
i got the low and high from selectoption and then move it into itab.
then i pass itab-matnr into fm. using loop.
but i got only one output
but ineet to got from and to output.
give me a solution
Regards
ds

How to get the selected value in SelectOneMenu in backing bean

Hello all,
I need your help. I want to have 2 select menus with the second menu's items list are populated based on the selection in the first menu. I don't know how to get the selected value in the backing bean so that I can based on that select menu to populate the second menu's item list. Basically I need to access to the UI Component of the first select Menu and retrieve its selected value.
Could you help me out?
Thank you very much in advance,
Lngo

Hi Lingo,
There r two ways of getting the values into the list. First one is hardcoding the values and the second one is use the list and get the values into the list by firing a query in the database.
Inorder to display the values in the second menu based on the first onces selection we need to add an attribute to the first selectonemenu known as valueChangeListener and we need to sumit the page.
Here is the sample code
<h:selectOneMenu id="catalogue"
                              binding="#{urbean.catalogue}" onchange="submit()"
                              valueChangeListener="#{urbean.categoryValueChange}"
                              <f:selectItem itemLabel="Select Catalogue" itemValue="" />
                              <f:selectItems value="#{urbean.catalogueList}" />
</h:selectOneMenu>
<h:selectOneMenu id="category"
                              binding="#{urbean.category}">     <f:selectItem itemLabel="Select Category" itemValue="" />
                              <f:selectItems value="#{urbean.categoryList}" />
                              <                         </h:selectOneMenu>
now in method called by valuechangelistener we need to write the similar code
public void categoryValueChange(ValueChangeEvent event) {
String rfnum = (String) event.getNewValue();
List categoryList = new ArrayList();
List tempList = new TablenameDAO().getActiveCatByCatalogueID(rfnum);
          for (int i = 0; i < tempList.size(); i++) {
               Tablename tablename = (Tablename ) tempList.get(i);
               String value = "" + tablename .getrfnum();
String label = tablename .getname();
     if (label == null) {
               label = "";
               SelectItem item = new SelectItem(value, label);
               categoryList.add(item);
          bean.setCategoryList(categoryList);
///getActiveCatByCatalogueID (rfnum) should bring the records which r based on the rfnum
if u follow this process i am damsure that u will get the values in to the secondlist based upon the first list
Thanks & Regards
Manidhar

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

InfoSet - Z tables need to be appeared on the selection criteria

Hi ,
My requirement is to have Z table fields in the selection criteria in an info set.
Currently i have an info set which has only standard SAP fields for selection. I have couple of Z tables whose fields need to be included in the selection criteria. Based on the values selected, report has to be displayed. So i believe some code has to be added for it.
Can you please tell me how to add Z Fields in the query.
Thanks,
Sarika.

Hi Sarika,
Again refer to the above link http://shafiq.us/sap/index.php?option=com_content&view=article&id=54:adhoc-query&catid=41:adhocquery&Itemid=61
Then go to heading "Ad-hoc Queries (Tcode: SQ01)"
Then see Step 6-b, this is where you specify which field will be displayed on selection screen. Follow the steps and I am sure you will be able to complete your requirement.

Does anyone know how to invert the selection of thumbnails in Reader / Acrobat?

Please help me,
Does anyone know how to invert the selection of thumbnails in Reader / Acrobat?

Hello,
Could you please suggest the Acrobat/ Reader version at your end? Please check if this article helps - Adobe Acrobat X Standard * Rearranging pages in a PDF
It's for Acrobat standard but the steps are same
~Deepak

Invalid batch according to the selection criteria in batch determination

Good day to all!
I am trying to Post Goods Issue in my Delivery but I cannot proceed because of the Batch. When I am trying to use a Batch in the Picking tab of Delivery Create Overview, this message appears: Invalid batch <BATCH NAME>according to the selection criteria in batch determination. Do you have any idea how to resolve this? Thanks!

you work with batches,
and your system is customized to check if a manually entered batch fulfills the criteria of your batch determination.
This is not the case, hence you get the error message.
So you have to decide whether your batch determinatiion selection criteria wrong, or if the customizing to check this criteria is unwanted, or if you better do not send this chosen batch to your customer as it may result in a return.

How to see the keyboard shortcuts in pages like " alt " function in word?

how to see the keyboard shortcuts in pages like " alt " function in word?

luisandre wrote:
In word , if you press "alt" show you all the options you have . Appear numbers or letters in each options of the toolbar. So is more easy to work with the keyboard. How do you do this in pages?
Go to system preferences/language & text/input sources and check the box for Keyboard Viewer. Then select Keyboard Viewer from the "flag" menu at the top right of the screen. It will show all the special characters you can make when you press the alt and alt + shift keys.

Can I pass the selected member at page dimension to form business rule?

I have a business rule which will be executed when the form get loaded, the business rule is very complex, so I want to narrow down the calculation by passing the selected member at page dimension to the business rule.
For example, I have year as page dimension, and I only want to calculate the selected year at one time? How can I do it?
I know runtime prompt, but I don't think it's a good way, since you need to select again.
Thanks
Tony

You can use a variable and a run time prompt.
You can set the business rule options in planning to "Use Members on Form" and "Hide Run time prompt"
This way the page/pov member will be passed into the business and into the variable.
Cheers
John
http://john-goodwin.blogspot.com/

DB14 Backup - No logs exist for the selection criteria for system DEV

Hello Expert,
When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
so please suggest me where i need to maintain the selection criteria.
Thanks & Regards
Annasaheb

Hi Anna,
As told by Markus and Eric above...
you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
Why you are searching for money in an empty pot
Regards
Nick Loy

Enhance the selection criteria of COOIS

Hi Experts,
My role is Basis, I have a problem with tcode COOIS. Users normally execute the COOIS and not enter the sensible selection criteria. It make very high system performance during run and use more than 70% of SAP paging after finished. Normally SAP performance is good enough, I cant imagine if user execute COOIS more than 1 session. They're also not accept to execute in background due to their existing operation design but only thing I can thinking now is make more restriction for the selection criteria.
Pls suggest me ur best practise that, How can I hide or lock the unneccessary selection criteria in COOIS? And set the default variant for everytime user run tcode COOIS or else that can enhance the COOIS.
Regards,
Piyapong C.

Hi
Piyapong using variants we can solve this problem.In the initial screen enter the selection parameters as per your requirements after that save that variant.After that when you run the COOIS again,run with this variant.
In this you can protect the field,hide the field and you can make the field as required field(mandatory entry).
Regards,
Raj.

How to ignore the selection criteria temporary page in print

Similar Messages

Maybe you are looking for