How to implement dependencies between search criteria in a Search page

Hi All,
I am using Jdev 11.1.1.6
Someone please let me know how to implement dependency between the search criteria in a search page.
i have found few articles for implementing the same in forms.
i am trying to implement dependencies between search criteria's. i will be using two serach criteria's as lov's in Search page(Using search panel) not in simple forms.
the second criteria lov should be listing all the results based on the firstr search criteria.
someone pls let me know how too implement this.
Regards
Siva

Thanks Timo,
I got the result. On the dependent attbute properties,i selected the parent attribute and then followed the link for further proceeding.
Its working fine.
Thanks alot for the reply.
Regards
Siva

Similar Messages

How the implementation differs between BW and BI , Is BI takes more time fo

Hi All,
I would like to know difference between implemenation and time lines for MM as mentioned below.
How the implementation differs between BW and BI , Is BI takes more time for implementing MM module than on BW?
Thanks in advanced. (Full points will be awarded)
With Regards,
PCR

Hi Timo,
Thanks for response!
But as i read from the following url: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html, the setQueryTimeOut(int timeOutMills), the timeOut is mentioned in milliseconds. Please correct me if I am wrong.
and i have overriden the executeQuery() method in the View Object Impl class as shown below:
public void executeQuery() {
Map sessionScope = ADFContext.getCurrent().getSessionScope();
sessionScope.put("MyQuery", this);
try {
super.executeQuery();
} finally {
sessionScope.remove("MyQuery");
throw new JboException("Query Taking too long to respond");
and in the JAVA class i am calling the above method like this:
monitor.setQueryTimeOut(6);
monitor.executeQuery();
But the issue is:
1. The above exception message is getting carried forward to other pages as well. I mean somewhere in the session/ADFContext this message is being saved and error comes up/pops up when i click on other tabs of the page. How do i clear this?
2. The above exception message is coming for the first time but when i click the 'Submit' button second time, i am getting the results and also the message that 'Query is taking too long to respond'. This should not be the case, everytime it should show the same message as the timeout limit is less and the query should end without fetching the results.
Kindly let me know how to resolve the above issues, any pointers will be helpful.
Thanks in advance.
Edited by: user9223904 on Nov 3, 2012 4:42 AM

Belonging To Search Criteria in Document Search

Hi,
I have been trying to find an explanation of the search terms "Me", "My Team", "My Group", "My Company" and "My Responsibilty Group" that are available within the document search.
Having investigated the search results that are returned I cannot work out the logic. If anyone can assist, then points will be awarded. Many thanks,
Jon

Hi,
GO to SPRO->Customer Relationship Management->>>Customer Relationship Management>Application Element->Search Group>Define Search Criteria Selection/Define Search Variant Selection
Groups of different search criteria can be provided in the advanced search. In Account Management for example, you can search for customers according to address fields or corresponding contact partners. The required search fields are always determined from the selection of two dropdown boxes. These are the search fields By-Shuffler and Show-Shuffler.
You define the selection options for the search criteria selection. This search field is in the advanced search of the People-Centric UI. You define requested data for the selection, that is a specific field group with the selection. You can group the search criteria that you have specified under Search Group Structure. They are listed in a dropdown box.
Activities
1. Select New Entries.
2. Enter a user-defined identifier for the search criteria in the By-Shuffler column.
3. Enter a description for the search criteria in the Description column.
reward points if helps
Regards
Kushal

How to implement paging in webdynpro jave based on search criteria.

Hi All,
In a requirement I need to implement paging in webdynpro java development.
I successfully did it when there is no search criteria is available i.e webdynpro fetched all data from the BO object and I did it using a "indexNO" (unique serial no from 1,2,3,4.....) field available in BO object.
But when there is search criteria available , i.e the data to be fetched from the BO based on some specific field , at that time the "indexNo" field of all data fetched based on search criteria are discrete i.e not continious. In that case how to implement the paging concept.
I am using CE version 7.1 EHP 1.
Thanks in advance
Srikanta Satapathy

Hi,
If you go to your VO and generate the ViewObjectImpl, in there you can create a method which will contain two parameters, 1 the attribute name and 2 the value.
Then you can follow something like explained in this post:
ADF Tutorial: How to apply bulk actions to a view object rows
The only difference is that you will need to create a method like this:
public void updateAttribute(String attribute, Integer value){
        RowSetIterator iter = createRowSetIterator(null);
        while (iter.hasNext()){
            Row row = iter.next();
            row.setAttribute(attribute, value);
Then you expose that as a client interface and then after you filter your table by your criteria you just need to execute this method passing the right parameters.
Regards

How to add a new search criteria in Advance Search Page in OAF

HI,
In my application (R12) we can access customer related information from 2 places (2 different responsibilities as mentioned below), both are OAF pages.
1. AX receivables
2. Sales online
From both the responsibilities we can perform search for customer related information as well (Simple as well as Advance Search).
But Advance Search screen from 'Sales online' allows user to perform search, based on few additional fields as well such as 'Classification' (it's an lov based field).
Now, User is asking to add that field on search page of AX receivables as well.
So, how to add one more field (as search criteria), on an standard 'Customer' screen?
Additional Info :
1. LOV is based on HzPuiClassificationFilterVO
2. And this VO is available on both pages. (oracle.apps.ar.hz.components.search.server.HzPuiClassificationFilterVO)
So can we achieve this by Personalization only ? if yes plz share the steps as well.
Regards,
Adi

Yes. It is possible through personalization.
1. Create a criteria row under Advance Search
2. Create a Result Item under advance table columns
3. Create a Query Criteria Map based on the criteria and result item above.
Please note the newly added criteria field should be in the Searchresults VO attributes list.
Otherwise you need to extend the VO as well.
Hope this helps.
Regards,
-Mukesh.

How to implement index array inside case structure for searching a 3D array?

Well I have a 3D array and I want to index certain elements from that array. And I have thought of one way of doing this is to have multiple index array functions on the block diagram to search the array simultaneously, but that would be messy. Or I could setup some kind of case structure and place each index array function into individual cases. I've tried the latter, but when I connect the 3D array to the case structure at the"?" it doesn't give me permission because it says I'm hooking up two different types of data. Case Structure is for T or F and 3D array is not a boolean.
So how can I setup the Case Structure to work for a 3D array?

A case structure's selection tunnel cannot accept an array. What exactly are your search criteria? It sounds like a few FOR loops will be needed.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to Dynamically add Search Criteria in Advance Search Region.

Hi All,
I want to understand how can we add Search Criteria dynamically in the Advance Search Region.
The Requirement is to add 4 additional search criteria for an org_id in a multi org structure. For other business those fields should not be visible.
I did try this with the form personalization but could not Show/hide the additional search criteria programatically for the business as we can only see 4 search criteria at the time of page load and other criteria comes in the drop down list to add which can not be show/hide after page load.
I thought of a solution to add search criterias dynamically for my org through extending controller.
I found the OAAdvanceSearchBean (advance search Region in controller) object for my Advance Search but could you tell me how can I add the Criteria Row in that Advance Search (createWebBean function) and then add the item in criteria Row dynamically.
Also please tell me how we can increase the showed criteria from default 4 to more, setDisplayedCriteriaCount(int) is not allowed and it is not working also.
Thanks.
Regards,
Ashish Bansal

Hi,
As Lars said The "Search Option Set" and the "Search Component Set" offer you quite some flexibility.
You can configure both of these component to customize your search.
Once you did it, you can create a new basic search iview and set these components.
On the other hand, you also customize the layout use to show result of search.
Dont'f forget that you need to configure Trex and create an index.
For instance, I configured the search criteria, the system only asked me some metadatas (created by us,whose value are dependents). Each time that you upload a document you set these attributes.
Then when you want to search, appear a screen with these values
Country :
City:
search field:
Patricio.

Adding New search criteria in Advanced Search

Hi,
In the page "PosVpoMainPG.xml", I have to add new search criteria "PO Description" apart from the existing ones.
Can it be done by personalization? How?
If not, please let me know the steps to do it from Jdeveloper.
Regards,
Ashish

Check whether Query region has been used for the Page development and also figure out the construction mode (resultBasedSearch or autoCustomizationCriteria). You can create the extra column in the result table and define mappings as appropriate.
Regards
Sumit

Interdependent Search Criteria with FPM Search GUIBB

Hello everyone,
I have the requirement to implement a FPM Search GUIBB where some search criteria are interdependent on each other. I will explain this with an example:
We have two search criteria, "Country" and "City". All possible values of "Country" are shown in a drop down list box. When a value in that drop down list box is selected, the other drop down list box of possible cities should only show those values which fit to the selected country. So, when I select “Germany” the second drop down list box should only show Berlin, Frankfurt and Munich. When I select Spain it should only show Barcelona and Madrid, etc.
I already found out, that something similar is possible with OVS Value Helps. Nevertheless, I would prefer to find a solution with drop down list boxes.
Thanks in advance for your advices!

Hi SF,
As you said, It is actually a look-up field on the main catalog table.
It will visible in MDM data Manager Drill down search if and only if you set Property Search Tab as Yes for field in main table which is look up to some sub table using MDM Console.
Once you done , you will see this field as well in Drill down search and can pick more than one value using CTRL key.
Other alternative i would suggest you is that, if you have any field of type text is blank in you main table say FIELDGA. Populate this field against the records who has USAGE = Group A using assignment.
So, in this way you would have two fields in Free Form Search criteria, select value Group A from field FIELDGA in search selection and using original field USAGE select GROUP B. In this way u can achieve this.
Better to go with property Search Tab = Yes for that lookup field in main table using MDM console.
Kindly revert with the result.
Thanks and Regards,
Mandeep Saini

Search criteria region and search results regions

I have a page where the user can enter some search values into some input boxes. Then once the search button is pressed I want the search results region displayed and not when the page is loaded. Eg I want the search result region to be hidden on page load until the search button is pressed. I though about a hidden item that is initialized to null and set after the search button is pressed.

John - The hidden item's Source Type can be Static Assignment, the Source value should have no value and the Source Used attribute should be "Only...". Now the page will run in one of three ways:
1) when you link to it and you want the search results region to be hidden you pass in the item and a null value (f?p=app:page:session::NO::P1_ITEM: or reset the page in the link: f?p=app:page_session::NO:1 assuming it's page 1)
2) when the page branches back to itself after the search criteria are submitted, the branch passes P1_ITEM:xxxx or something
3) when you branch or link to the page from somewhere else (including for pagination requests) and you want the previous search results to be retained/reused, don't pass anything in the link for P1_ITEM and don't reset the page.
Scott

Filter results for New Search Criteria of Advanced Search

Hi,
I'm new to oaf.
I have added extended VO item to seeded advanced search region as new search criteria by personalization.
When i try to search for new criteria the results are not filtering and my extended CO logic as follows:
IN PFR:
if(oapagecontext.getParameter(oaquerybean.getGoButtonName()) != null || oapagecontext.getParameter(oaquerybean.getPersonalizeGoButtonName()) != null)
OAAdvancedSearchBean oaadvancedsearchbean = (OAAdvancedSearchBean)oawebbean.findChildRecursive("assetAdvSearch");
boolean flag = true;
if(oaadvancedsearchbean != null)
int i = oaadvancedsearchbean.getDisplayedCriteriaCount();
String s4 = oapagecontext.getParameter("advancedSearchRadioGroup");
for(int j = 0; j < i; j++)
String s6 = (new StringBuilder()).append("Value_").append(Integer.toString(j)).toString();
String s7 = (new StringBuilder()).append("Condition_").append(Integer.toString(j)).toString();
String s8 = oaadvancedsearchbean.getOriginalUINodeName(s6);
if(s8.equals("XXAssocMsgInput"))
String xx=oapagecontext.getParameter(s6);
oapagecontext.writeDiagnostics(this, "criteria value: "+xx, 105);
if (xx !=null) {
StringBuffer stringbuffer = new StringBuffer(100);
// Setting whereClause at Runtime to restrict the query
OAApplicationModule rootam = oapagecontext.getApplicationModule(oawebbean);
OAApplicationModule childAM = (OAApplicationModule)rootam.findApplicationModule("XXAdvSearchAM");
OAViewObject vvo1 = (OAViewObject)childAM.findViewObject("XXAdvSearchVO1");
Serializable[] parameters = {xx};
childAM.invokeMethod("getAssociateWith", parameters);
In AMImpl:
public void getAssociateWith(String xx)
OAViewObject vo = (OAViewObject)getXXAdvSearchVO1();
Vector parameters = new Vector(2);
StringBuffer whereClause = new StringBuffer(100);
int clauseCount = 0;
int bindCount = 0;
vo.setWhereClauseParams(null); // Always reset
if ((xx!=null) && (!("".equals(xx.trim()))))
whereClause.append(" ASSOCIATE_WITH LIKE :");
whereClause.append(++bindCount);
parameters.addElement(xx);
clauseCount++;
vo.setWhereClause(whereClause.toString());
writeDiagnostics(this,"In AMIMPL whereclause:"+whereClause.toString(),119);
if (bindCount >0)
Object[] params=new Object[bindCount];
parameters.copyInto(params);
vo.setWhereClauseParams(params);
writeDiagnostics(this,"In AMIMPL XXAdvSearchVO:"+vo.getQuery(),120);
writeDiagnostics(this,"In AMIMPL VO Cnt:"+vo.getRowCount(),121);
vo.executeQuery();
writeDiagnostics(this,"After query = " + vo.getQuery(),123);
In diagnostics, parameter is not getting assigned with the value ..
Can you anyone suggest the inputs?
Thanks,
mallik
Edited by: 758972 on Jul 29, 2012 1:09 PM

Mallik,
Is it the same requirement which we were discussing in another thread, to add search criteria in advance serch bean through personalization.
If yes, let me try at my end and will let you know..
--Parag Narkhede

How to implement Select Between clause? ..help

Hi
I want to implent typical select between clause in the mappings. It is like i want to check whether the "Given date" exists between the range of dates. The range of dates is obtained from the various dimension tables. I dont know how implement that. please help.
Typical SQL query would be ....
and A."Month End Date" between dim.efcv_bgdt and dim.efcv_endt
and A."Month End Date" between dim2.efcv_bgdt and dim2.efcv_endt
and A."Month End Date" between dim3.efcv_bgdt and dim3.efcv_endt
and so on..............................
***************************************************************

Hi
Use a joiner operator and connect dim1, dim2, dim3 to it and in the join expression use your netween expression.
Or do you want to use the between in the select clause? Then use an expression operator and define a case when ... between ... and ... then ... else ... expression.
Ott Karesz
http://www.trendo-kft.hu

How to implement BINDING between drawing shapes and properties?

See this background info:
Can we have BINDING between drawing shapes and properties?
This needs more specific info. My application reads a number of XML files, and places the data in an Excel worksheet. Let's say that there are 20 XML files, the app creates 20 lower tabs (spreadsheets) named: "Item 1", "Item 2", ...,
"Item 20".
That is the current version. I am told by the users, however, that in some cases there are some XML files which create more than 1 Excel lower tab. For example, the file: "Items 8-11.xml" needs to fill tabs 8, 9, 10 and 11.
In that particular case the user will modify the default map (a 45-degree diagonal, equivalent to the
identity function F(x) = x), by clicking around. The resulting new map will look as follows:
Since the number of XML files does not change, the number of rows is constant. However, each time a black square is moved from its canonical (45-degree) location, a spreadsheet becomes "orphan" and therefore the application must create a new Excel
lower tab (which is a grid column). IOW: The number of columns keeps on growing to the right.
List<Model>
I figure that (as opposed to DataGrids which grow and shrink vertically, which each Model being 1 row) this thing should use the column as fundamental Model.
Before running the main app (the XML file reading procedures), the user will select a menu item named "Configure XML to Excel Mapping" and an interface similar to the image above will be shown.
In addition to the property binding, which has been discussed, how should I implement the drawing and erasing of black and white squares? I guess I will need some sort of "ConvertTo" bidirectional bridge from/to boolean and square drawing?

You lost me with the xml file and the tab and the wossname to the thingummybob.
I don't follow the explanation, sorry.
The way to show stuff like that isn't dependent on how the data is stored where though.
I probably wouldn't draw them, as such.
I'd probably just make each a usercontrol which bound the fill brush of a rectangle for the black white bit and used a border for the outline.
To simplify that:
<Grid> <Border>
<Rectangle Fill={Binding FillBrush}"/>
</Border>
</Grid>
FillBrush
Would be a public property solidcolorbrush exposed from your cellvm
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Media;
using GalaSoft.MvvmLight;
namespace wpf3
public class CellVM : ViewModelBase
private SolidColorBrush fillBrush;
public SolidColorBrush FillBrush
get { return fillBrush; }
set
fillBrush = value;
RaisePropertyChanged();
You can then have some logic somewhere which tells that viewmodel to show black or white fill. Which would be that converter bridge thingy equivalent. This thing is true then FillBrush = whiteBrush else FillBrush = blackBrush.
You could probably do it with just rectangle, lose the border and set the Stroke on the rectangle.
The stroke is the outside line round a rectangle ( or any shape).
https://msdn.microsoft.com/en-us/library/system.windows.shapes.shape.stroke(v=vs.110).aspx
And you would of course do other stuff like sizing the usercontrol and arranging an list in a list as I explained in your other thread.
Oh.................
But to answer the question in the title.
Yes you can bind all sorts of things including the point making up a polygon, brush used to draw the line and all sorts. You could even do flashing cells if you wanted.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How can I change between JSP and Java in the page language attribute

Does any one know the answer to this? I am trying to Switch between the 2 in the middle of the page. I want to include a file that uses <%@ page language = "JAVA" %> but the main mage uses Java Script. How can I switch it for this one file. I can't find the answer anywhere. Thanks for your time, and please help me. Also can some one post a good link for Session Tracking. I can't find much good information on that. Thanks again.
Eagles757(JAY)

Wow this didn't make sense in so many ways. It's truly bordering on nonsense. I think it's written in English.
<%@ page language="Java" %>This is optional. JSPs don't use any language other than Java. This is known as a JSP Directive. This line will be processed by the JSP/Servlet engine, and you won't see it in your output. If JSP ever supported a language other than Java, this would be where you would change it.
<script type="text/javascript">

</script>You can include a block like this in your JSP file. The JSP/Servlet engine will not process this script block at all (unless you include JSP <% %> tags somewhere in there, in which case they will be processed before the response is sent back to the web browser). This script block is where JavaScript goes. This code will be executed on the client's browser.
This is about as clear as I can make things given how muddled your question is. Please ensure you understand the basic differences between JSP, Java, JavaScript, HTML, Servlet engine, web browser before proceeding. Understand what code executes where, and in what order.
Brian

Custom search criteria for employee search in CRM Web UI

Hi,
I currently have some functionality in an implementation of enhancement spot BADI_CRM_BUPA_IL_SEARCH_EXT so that I can influence what search results are returned in component BP_HEAD_SEARCH.
It seems that this BADI is not called when looking for employees in BP_EMPL_SEARCH component.
Does anyone know where i can implement similar functionality as i have for the corporate account / individual account search, is there another BADI for this?
Cheers
Matt.

Hi Matt,
If a BADI is not getting called but you need it to be called then you can also call it in your custome code on component method.
Regards,
Suchita

How to implement dependencies between search criteria in a Search page

Similar Messages

Maybe you are looking for