How to implemet rulesets withn our overwring custom rules

Hi GRC Experts,
Recently we have done upgrade from 4.6C to ECC 6 and upgraded the VIRSA component from VIRSA 400_46C to VIRSA 400_700.
Before upgrade we have done some custom changes in the rule set. But after upgrade, we need to get the additional ruleset from SAP for ECC6. I am afraid if I overwrite the custom changes if I implemet the additional ruleset provided by SAP. What is the best way to get the rulesets implemented without overwriting the existing custom ones?
Awaiting your opinions and suggessions.
Regards
Prasanth

Hi Prasanth,
Your existing data will not be deleted when you upload the new ruleset. Use the Configuration, Rule Upload option which only appends the data.
You can ignore the ALL files, since you have the data already in the system.
Below thread gives you some light on the basic questions of an upgrade:
Upgrade of GRC 5.2 to GRC AC 5.3
Regards,
Raghu

Similar Messages

  • How to clear vendor open items with customer open items in APP?

    Hi Experts,
    Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'.  Still problem is not solved, hence I am requesting you to help me in this regard.
    Thank you very much,
    Regards,
    Ganesh.

    Hi
    In FBCJ after payment you have clear manually vendor balance in F-44.
    If you want SPL GL in FBCJ then write a Substitution .
    1. step 001 - Special G/L Substitution
    2. Prerequisite - Transaction code = 'FBCJ'
    3. Substitution posting key -- Exit (need help from abap) exit name
                                              G/L Exit (need help from abap) exit name
                                              Special G/L Ind Exit (need help from abap) exit name
    you can't do this without ABAP help
    Best Of Luck
    Tanmoy

  • PO For our foreign customer

    Hi expert ,
    We Release PO For our foreign customer in their (USD)currency. But we realse cheque in INR. how to proceed explain from Purchase order.
    regards
    nitin

    HI
    You need to post the target documents like GRPO,Invoice with the current exchange rate.
    Then,While making outgoing payments with that foreign vendor,You need to enter the exchange rate in that document and in payment means,select the currency as "INR",so that the INR amount will get calculated based on the exchange rate and exchange rate fluctuation acoount will get affected.
    revert me for any clarifications.....

  • How will i configure partner determination for customer master

    how will i configure partner determination for customer master data.

    hi
    Check this
    BUSINESS PARTNERS AND PARTNER DETERMINATION
    In the partner determination procedure you can determine whether partner functions can or should occur in a partner object (Customer Master, Sales Document, Item Category etc.) For each object, in which partner function can be created, you can define partner procedures. This also means that
    For Customer Master
    For Sales Documents
    For Sales Documents and Billing Documents: for items
    We can define our partner determination procedure for each of these levels as shown below. In Blue are given the ones wherein the Partner Procedures are assigned to the Partner Objects
    Customer Master Account Group
    Sales Document Header Sales Document Type
    Sales document Item Item Category in sales
    Delivery Delivery Type
    Billing Header Billing Type
    Billing Item Billing Type
    Sales Activity Sales Activity type
    By assigning a procedure you determine for which account groups (for the customer master), which sales document types (for sales documents) and for which item categories this procedure would be valid.
    In the partner determination procedure you can determine for each partner function
    whether the partner function is an obligatory partner function
    whether the partner function can be changed in the document
    BUSINESS PARTNER FUNCTION
    By assigning a business partner function to a partner you can determine which functions the partner fulfils in the business process. Partner Functions are classified using partner type. The partner type represents the roles played by the business partner within the business transaction.
    Following partner functions exist in the standard process of Sales and Distribution
    Partner Type Customer
    Sold-to Party, Ship-to Party, Bill-to Party, Payer and Sold-to Party authorized to release against a contract. You can define the sold-to party authorized to release against a contract in the partner screen of a contract. This partner may only schedule orders with reference to this contract, even when he is not the sold-to party authorized against a contract.
    Partner Type Contact Person
    Contact persons are natural persons whom you must contact at the customers for business processing (e.g. purchasers) Contact person can be created directly in customer master record.
    Partner Type Vendor
    A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
    The other possible partner functions on the credit side in the sale process are interpreters, auditors etc. The forwarding agent is an agent who performs transportation services. This includes organizing the shipment, delivery and receipt of the goods, arranging the carrier services and handling the customs issues.
    Partner Type Personnel
    Employee Responsible
    Sales Personnel
    You can enter an employee from your firm as the person responsible:
    In the Customer Master – If the employee is normally responsible for processing transactions with this customer.
    In the Sales Document – If the employee is responsible for processing the Business Transaction.
    STEP WISE PROCESS FOR PARTNER DETERMINATION PROCEDURE
    Sales and Distribution->Basic Functions->Partner Determination->set Up Partner Determination->Set up Partner Determination for Customer Master.
    First go to OVT0 – create customer account groups. Here you make new entries, click whether it is a one time customer, description. Also you can do the field selection here for general data, co. code data and sales area data.
    Now go to IMG – logistics general – business partner – customers – control – define & assign customer number ranges define the number. Here you range that you want and assign it to your customer account group.
    Now go to VOPA – here the selection will be on customer master, click on partner procedures, create the partner determination procedure. The following steps need to be done in partner determination area
    Assign partner function to account group i.e SP,SH, BP, PY to account group (debit side ). Sales and Distribution->Basic Functions->Partner Determination->Assign Partner Functions on the debit side to account Groups.
    Then create Partner Determination Procedure.
    Assign the Partner Determination Procedure to Partner Function.
    Then finally assign the Partner Determination Procedure to acc group.
    Important Points in Business Partners and Partner Determination Procedure
    Partner relationship maintained/defined in the customer master is proposed automatically in the document header when you create a sales document.
    In customizing we can decide whether several partners can be assigned to one partner function in the customer master.
    In sales documents, the system is configured so that only one partner can be assigned to each partner function.
    We can define partners at item level in the sales documents.
    Business Partners that are defined at the header level however cannot be changed at the item level.
    You can prohibit anyone from changing a partner that has already been entered in a sales document.
    It is also possible to manually change or enter the address of a partner, such as the Ship-to Party. This change does not affect the master record.

  • How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

    how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it.  i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this.  have i inadvertently clicked on something to turn this facility off?  i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

    Which version of photoshop are you using?
    After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
    For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

  • How to calculate Opening balance for a customer?

    Hi Experts,
    How to calculate Opening balance for a customer? I am trying to develop a report where in i have to get opening AR balance,current sales,adjustments etc of a customer. Please let me know how can i do this. I have some tables with me KNC1, BSAD, BSID.
    Thanks in Advance.
    Sharat Chandra.

    Say for example ..
    Get the opening bal for Customer 'K' in CCode 'C1' in 2008 ..
    First get all items from BSEG ..
    Select * from BSEG where KUNNR eq 'K'
                                     and BUKRS eq 'C1'
                                     and GJAHR eq '2008' .
    Sum all the DMBTR values (This is the total value).
    Second get the cleared items form BSAD for the above entries;
    Select * from BSAD for all entries in BSEG where KUNNR and BUKRS and XBLNR eq BSEG-XBLNR.
    Sum all DMBTR values ( this is cleared value).
    Third substract the cleared value from total to get Open value.
    This is a overview .. you should go to the tables and look for fields and etc.. and then define the logic meeeting your requirements .... this is a genric undersatnding ....
    Thanks,
    Aditya. V

  • How to query opening balance for all customer or Vendor for an speci. date

    Hi,
    How to query opening balance for all customer or Vendor for an specific date?
    Example:
    put any date and query will show all customer/ Vendor  that date opening/current balance.
    Regards,
    Mizan

    Hi mizan700 ,
    Try this
    SELECT T0.[DocNum] As 'Doc No.', T0.[CardCode] As 'Customer Code',
    T0.[CardName] As 'Customer Name',(T0.[DocTotal]-T0.[PaidSys]) As 'O/S Balance'
    FROM OINV T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    INNER JOIN OCRG T2 on T1.GroupCode = T2.GroupCode
    INNER JOIN INV1 T3 ON T0.DocEntry = T3.DocEntry
    WHERE T0.[DocStatus] ='O'
    AND
    (T0.[DocDate] >='[%0]' AND T0.[DocDate] <='[%1]')
    Regards:
    Balaji.S

  • How to change the reconciliation account in customer master record?

    hi friends,
    i created customer master with wrong reconsiliation account in XD01. i failed when i am trying to change that reconsiliation account in XD02. it was suppressed. how to change the reconcilition account in customer master data?

    Hi,
    Go to this path: Spro>Financial Accounting>Account Receivable & Account Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Define Account Groups with Screen Layout (Customers)
    Double Click on Your Group, Then Click on Company code Data under Field Status, Then Double click on Account Management, That screen you will find the Reconcilation Account, Select Requred Entry.
    now it will coming Customer master.
    It's useful assigne points as a way to say Thanks
    Regards
    gvr

  • How do I print more than one custom-size photo on a page in PSE 10?

    I recently upgraded from Photoshop Elements 6 to Photoshop Elements 10.  I make greeting cards, and on PSE 6 I was able to print two custom-size (6-1/2” x 5”) cards on each 8-1/2” x 11” sheet of photo paper.  The option to print more than one custom-size card on a single sheet of paper is not available in PSE 10.  I want to know how I can print more than one custom-size card (or photo) on a page in PSE 10?

    In Editor:
    File>Print>#4 Select type of print>picture package

  • My husband and I share a new PC.  We have different music tastes and each have an iphone.  How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

    My husband and I share a new PC.  We have different music tastes and each have an iphone.  How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

    Each device only syncs waht you select.
    Select only what you want for each phone.

  • How to use the bind variable in custom.pll

    Hi,
    How to use the bind variable in custom.pll.Its through error.
    any one gem me.
    very urgent.
    M.Soundrapandian.

    Hello,
    Please, ask this kind of questions in the e-business forum.
    Francois

  • How can I add a new message(custom text message) to the holiday approval em

    How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
    TIA

    The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
    For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
    JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
    So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
    The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
    It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

  • How to create a Language Branch using custom workflow?

    Hi,
    I’ve a requirement where I need to create a workflow process which will create a Language branch.  i.e I wanted to achieve the functionality using custom workflow as given in the docs: https://dev.day.com/docs/en/cq/current/administering/multi_site_manager.html#Managing the Translation of your Language Branches 
    As per the OOTB functionality,
    1.     If the target page is not exist in the Language branch, it will copy the reference page to target path.
    2.     If the target page is already exists, it will not create a copy of the reference.           
    After the translation, if we make any changes in the reference page and activate the reference, then we have a button called 'Show side by Side' under Translation in the side kick which shows differences between reference page and translated page.
    Example:
    So, I would like know how we can achieve this in my custom workflow process. In my workflow process, I’m checking whether the page is existed in the target path or not. If not exist, I used page copy.
    Eg: Page page = newPage.copy(originalPage,targetPath+"/"+originalPageName,null,true,true );
    When I use above api, it just copies the page and it will not maintain any relation with reference page.
    Any pointers would be more helpful.
    Thanks
    Siva

    Hi,
    I have a similar request to export the texts from one language and after the translation to import them to the new language, did you find any solution? My question is how can I add some steps into my workflow to validate the imported data -and if the user validate the texts then proceed with next step(in my case I import the text from a file and generate a form with values). I read the documentation from Adobe but I didn't find anything related to how we can add a workflow to a dynamically generated from(I don't use the CQ form component).
    Can anybody help me with this?
    Thx, Lorand

  • *** How to get the username in a custom password change routine....

    How to get the username in a custom password change routine / procedure / form when a user's password has expired and is redirected automatically to this custom program?
    We use the 2nd parameter in LOGIN_URL column in WWSSO_LS_CONFIGURATION_INFO$ table to get to this custom change-password proc.

    OK !
    Use that maybe good :
    select USERID into v_user from sys.aud$
      where ntimestamp#=(
      select max(ntimestamp#)
      from sys.aud$ );

  • Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

    Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
    i need it so muchhh!

    Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

Maybe you are looking for