How to import more than 2k items from Excel(2010) to SharePoint 2010 List?

Hi,
I am getting error while importing more than 2k items from Excel to SharePoint List.
Need solution!!

Hi.
Try to use the Import Spreadsheet list template to import your data.
http://www.dummies.com/how-to/content/import-a-spreadsheet-as-a-list-in-sharepoint-2010.html
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

Similar Messages

How to order more than 1 item from iphoto?

I just created 3 calendars and 3 photobooks and want to order all of them but it seems like I have to order them one by one and also pay for the shipment separately = 6 times.. is there anyway I could make ONE order for all my items at the same time?
/Jonna

Welcome to the Apple Discussions.
Can I combine my orders to save on shipping?
Apple does not have a way to combine orders. Due to the highly-automated nature of our system it is not possible to make any changes to an order once it has been placed. (You can cancel you order within 90 minutes of placing it; read our Cancellation Policy for more information).
That's from http://www.apple.com/support/photoservices/ordering_options/
Regards
TD

How to insert more than 12 items using BDC for MB1C

Hi,
When we use LSMW for data transfer of MB1C transaction, more than 12 items can be inserted in a document.
But using BDC only 12 and below is possible, if the flat file system has more that 12 item, then the document is not created.
How to insert more than 12 item in a document.
Regards

Hi Gow,
I have uploaded the MB1C through a BDC and it is working fine for n no of items.
Here is the code. May be this will be of your help.
*& Report ZMB1C
report ZMB1C
       no standard page heading line-size 255.
type-pools : slis.
tables : t100.
data: begin of record,
        MATNR(018),
        ERFMG(017),
        EXBWR(016),
      end of record.
data : itab like table of record with header line.
data : w_bdcdata type bdcdata.
data : t_bdcdata type standard table of bdcdata initial size 1.
data : messtab type standard table of bdcmsgcoll with header line.
data : mstring(300).
data : vf_index type i,
       no_lines type i,
       count type i value 0.
data : v_bldat(20),
       v_budat(20).
*Excel Sheet Data Upload Details
data : vf_start_col type i value '1',      "start column
       vf_start_row type i value '2',      "start row
       vf_end_col   type i value '100',    "maximum column
       vf_end_row   type i value '10000'. "maximum row
*/ Internal Table For Excel Data
data : it_excel type kcde_cells occurs 0 with header line.
*/ Field symbol
field-symbols : <fs>.
data : begin of it_messtab occurs 0,
       plant(10) type c,
       status(10) type c,
       message(90) type c,
       end of it_messtab.
*Data for ALV display
data : wa_fcat type slis_fieldcat_alv,
       colcnt type i.
data : it_fieldcat type slis_t_fieldcat_alv,
       i_events type slis_t_event.
data : l_title type sychar70.
data : l_repid like sy-repid.
* Selction Screen
selection-screen begin of block b1 with frame title text-000.
parameters : p_file like ibipparms-path obligatory,
             p_mode like ctu_params-dismode default 'A'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-001.
parameters : p_bldat like MKPF-BLDAT obligatory,
             p_budat like MKPF-BUDAT obligatory,
             p_bwart like RM07M-BWARTWA obligatory,
             p_werks like RM07M-WERKS obligatory,
             p_lgort like RM07M-LGORT obligatory.
selection-screen end of block b2.
* At Selction Screen
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = ''
    IMPORTING
      file_name     = p_file.
*Start of Selection Event
start-of-selection.
call function 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = vf_start_col
      i_begin_row             = vf_start_row
      i_end_col               = vf_end_col
      i_end_row               = vf_end_row
    TABLES
      intern                  = it_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      others                  = 3.
if sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if it_excel[] is initial.
    MESSAGE I000(ZCL_TCSABAP).
else.
    sort it_excel by row col.
    loop at it_excel.
      move : it_excel-col to vf_index.
      assign component vf_index of structure itab to <fs>.
      move : it_excel-value to <fs>.
      at end of row.
        append itab.
        clear itab.
      endat.
    endloop.
endif.
if not itab[] is initial.
    DESCRIBE TABLE itab LINES no_lines.
    clear messtab.
    refresh messtab.
    CONCATENATE p_bldat+6(2) '.' p_bldat+4(2) '.' p_bldat(4) into v_bldat.
    CONCATENATE p_budat+6(2) '.' p_budat+4(2) '.' p_budat(4) into v_budat.
    perform map_rec.
    call transaction 'MB1C' using t_bdcdata mode p_mode update 'A'
    messages into messtab .
    clear t_bdcdata.
    refresh t_bdcdata.
    loop at messtab where msgtyp = 'E' or msgtyp = 'S' .
      select single * from t100 where sprsl = messtab-msgspra
                                and   arbgb = messtab-msgid
                                and   msgnr = messtab-msgnr.
      if sy-subrc = 0.
        mstring = t100-text.
        if mstring cs '&1'.
          replace '&1' with messtab-msgv1 into mstring.
          replace '&2' with messtab-msgv2 into mstring.
          replace '&3' with messtab-msgv3 into mstring.
          replace '&4' with messtab-msgv4 into mstring.
        else.
          replace '&' with messtab-msgv1 into mstring.
          replace '&' with messtab-msgv2 into mstring.
          replace '&' with messtab-msgv3 into mstring.
          replace '&' with messtab-msgv4 into mstring.
        endif.
        condense mstring.
        it_messtab-message = mstring(300).
        it_messtab-plant = p_werks.
        if messtab-msgtyp = 'E'.
          it_messtab-status = 'Error'.
        else.
          it_messtab-status = 'Success'.
        endif.
        append it_messtab.
        clear it_messtab.
      endif.
    endloop. "messtab
    if not it_messtab[] is initial.
      perform buildcatalog.
      perform display.
    endif.
endif.
*&      Form Map_Rec
*       text
form map_rec.
perform bdc_dynpro      using 'SAPMM07M' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                                'RM07M-WVERS3'.
perform bdc_field       using 'BDC_OKCODE'
                                'NPE'.
perform bdc_field       using 'MKPF-BLDAT'
                                v_bldat.
perform bdc_field       using 'MKPF-BUDAT'
                                v_budat.
perform bdc_field       using 'RM07M-BWARTWA'
                                p_bwart.
perform bdc_field       using 'RM07M-WERKS'
                                p_werks.
perform bdc_field       using 'RM07M-LGORT'
                                p_lgort.
perform bdc_field       using 'XFULL'
perform bdc_field       using 'RM07M-XNAPR'
                                'X'.
perform bdc_field       using 'RM07M-WVERS2'
perform bdc_field       using 'RM07M-WVERS3'
                                'X'.
loop at itab.
    count = count + 1.
    perform bdc_dynpro      using 'SAPMM07M' '0410'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSEG-EXBWR'.
    if count <> no_lines.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=NPE'.
    elseif count = no_lines.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=BU'.
    endif.
    perform bdc_field       using 'MSEG-MATNR'
                                  itab-MATNR.
    perform bdc_field       using 'MSEG-ERFMG'
                                  itab-ERFMG.
    perform bdc_field       using 'MSEG-EXBWR'
                                  itab-EXBWR.
endloop. "itab
endform. "Map_Rec
**      Form BDC_DYNPRO
form bdc_dynpro using program dynpro.
clear w_bdcdata.
w_bdcdata-program = program.
w_bdcdata-dynpro   = dynpro.
w_bdcdata-dynbegin = 'X'.
append w_bdcdata to t_bdcdata.
endform.                    "bdc_dynpro
**      Form BDC_FIELD
form bdc_field using fnam fval.
if fval <> space.
    clear w_bdcdata.
    w_bdcdata-fnam = fnam.
    w_bdcdata-fval = fval.
    append w_bdcdata to t_bdcdata.
else.
    clear w_bdcdata.
    w_bdcdata-fnam = fnam.
    w_bdcdata-fval = fval.
    append w_bdcdata to t_bdcdata.
endif.
endform.                    "bdc_field
*       FORM buildcatalog                                             *
form buildcatalog.
clear wa_fcat.
clear it_fieldcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'PLANT'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'PLANT'.
wa_fcat-key          = 'X'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'STATUS'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'STATUS'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'MESSAGE'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'Message'.
wa_fcat-outputlen = '90'.
append wa_fcat to it_fieldcat.
endform.                    "buildcatalog
*       FORM display                                                  *
form display.
l_title = text-002.
l_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = l_repid
      i_grid_title       = l_title
      it_fieldcat        = it_fieldcat
      it_events          = i_events[]
    TABLES
      t_outtab           = it_messtab
    EXCEPTIONS
      program_error      = 1
      others             = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "display
Regards,
Amit

Short dump transferring more than 99 items from catalog to shopping cart

Hi
I'm encountering a short dump when trying to transfer any more than 99 items from the internet sales catalog to an EBP shopping cart.
The error states "Unable to interpret "*0" as a number" - the code in the error suggests that the system is attempting to populate field LCNT with *0.
Any ideas greatly appreciated.
Regards
David

Hi both
Thanks for the replies. I've already checked the usual channels (OSS, Google etc) without success, hence my thread here.
The business reasons for having 99 catalogue items are not particularly strong, but it would be a 'nice to have' as one or two users have fallen foul of it. They can obviously raise separate carts if necessary.
If the consensus is there's no solution then we'll just have to put up with it as a catalog limitation!
Regards
David

How to transfer data more than 255 char from excel sheet to internal table.

Hello Experts,
I have a requirement where i have a text field in the excel sheet of more than 255 char and need to be updated in the text element. To do that i need to transfer the excel sheet data to an internal table where one of the field is more than 255 char.
in the standard function module it works only upto 255 char. Can you help me if we have some other way to get more than 255 char in the internal table from excel sheet.
Thanks in Advance.
BR,
RaJ.

Using .xls, it is not possible transfer data more than 255 characters from excel sheet. However if the excel sheet is saved as Comma Delimited format or Tab Delimited format, then using GUI_DOWNLOAD function module data more than 255 characters can be transferred.
File name should be : .csv (Comma Delimited format) or .txt (Tab Delimited format)
File Type would still remain 'ASC' while calling function module GUI_DOWNLOAD
Also In the internal table declare the field type as String or LCHAR.
Eg:
TYPES: begin of ty_file,
        col_a TYPE string,
      end of ty_file.
DATA: i_file type standard table
               of ty_file
             with header line
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
TABLES
    DATA_TAB                      = i_file

How to restrict more than one delivery from one sales order.

Hi Guys,
We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
We want only one delivery for one sales order and rest of line items should be treated as rejected.
Kindly help
Thanks in advance,
Balu

Hi MP,
Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
Thanks,
Balu.
Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

How to email more than one photo from camera roll

How do e-mail more than one photo from the camera roll at a time?

Go to the camera roll, open the thumbnails, click on the arrow in the top right, select up to 5 photos, click on share in the top left and select email.

How to delete more than one workbook from command line

Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
Alex

Hi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael

Selecting/importing more than one clip from camcorder using check boxes

Hi.
I've just bought a new camcorder (SD Card) based. I used to use Mini DV tapes.
Now when I import into iMovie9 I am able to select which clips I import. I always choose manual import because I like to save different clips into different topics.
I am able to uncheck all the clips and individually select each one I want to import but I'm baffled about how to select more than one clip at a time and then check the import box. e.g. select clips 3 to 15 and then having to check the box once instead of checking ever box for each clip. There must be something like hold shift down while selecting but I've not managed to work it out yet!
Any help is appreciated.
Thanks
Paul

Hi Paul,
I import clips as you do - by manually ticking the box in each clip. Like you, I haven't figured out a way to select a group of clips in one go - that would be very handy! Sorry I can't help - I'll be interested to see what answers you get.
John

How to return more than one value from a function

hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.

I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code>

How to pass more than 3 Items in link of report attribute?

I have a report with edit link.
After user click link, then go to next page. I want to pass more than 3 items in this link, item 1 name=xxx and value=#xxx#.
How can I do this?
Thanks.

Why wouldn't you pass item values through links...is it not why they were created?1. Item values may contain characters that are not URL safe in general ('#') or in APEX (':'), causing the link to fail.
2. Recognisable item values that are visible in the URL are a security issue, and invite URL tampering that in a poorly designed and implemented system may allow unauthorised access to data.
3. There are limits on the length of URL APEX, user agents and servers are capable of handling.
4. Lots of long URLs in links drives up page weight and bandwidth usage.
5. General housekeeping problems and maintainenance issues: think about going backwards and forwards in single-row APEX URL text item showing 60 chars when making changes to a 2000-character URL.
Best practice when passing parameters through a URL is to use as few as possible: preferably single, unique, "meaningless" sequence- or sys_guid-generated references.

How to handle more than 255 char in excel att. in FM SO_DOCUMENT_SEND_API1

hi all,
Good morning.
My requirement is to send a report as an excel attatchment to the respective managers mail box. For this I am using the function module SO_DOCUMENT_SEND_API1 as follows.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data =
put_in_outbox =
sender_address =
sender_address_type =
commit_work =
tables
packing_list =
object_header =
contents_bin =
contents_txt =
receivers =
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Here the problem is contents_bin is of type SOLISTI1 which takes max 255 characters, As my report columns occupies more than 400 characters, I am unable to get all the column values in excel attachement.
Can anyone please help me to get all the column values in the excel attachment.
Thanks in Advance.

Hi,
Please check the following extract of a sample program I had executed.It deals with how to handle more that 255 chars in excel att in FM SO_DOCUMENT_SEND_API1
Hope this helps....
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
           con_tab TYPE X VALUE '09'. "OK for non Unicode
data : Begin of wa_output ,
          BUFFER(1000) TYPE C, " data to be written into xls format
       End of wa_output.
data : gt_output LIKE wa_output OCCURS 0 WITH HEADER LINE.
data : FIELDNAME_OFFSET TYPE I.
Attachement contents
DATA: BEGIN OF wa_att_cont.
        INCLUDE STRUCTURE solisti1.
DATA: END OF wa_att_cont.
DATA: lt_att_cont LIKE wa_att_cont OCCURS 0.
data : begin of zdfies occurs 0.
             include structure dfies.
data : end of zdfies.
data : begin of it_field occurs 0,
             fldname(40) type c,
       end of it_field.
data : yfilname like RLGRAP-FILENAME value 'C:\Documents and
Settings\'.
data : ok_code TYPE sy-ucomm,
       save_ok TYPE sy-ucomm.
data : flag type i.
********************************Variables*****************************
DATA: lv_count   TYPE i,                   " count
        lv_forwarder LIKE soud-usrnam,       " Forwarder.
        lv_lines TYPE i.                     " no of lines
********************************Structures****************************
DATA: w_doc_data LIKE sodocchgi1,
        w_sent_all(1) TYPE c,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ.
******Structure for Folder ID
DATA: BEGIN OF wa_folder_id.
          INCLUDE STRUCTURE soodk.
DATA: END OF wa_folder_id.
Folder Contents, change attributes
DATA: BEGIN OF wa_object_fl_change.
          INCLUDE STRUCTURE sofm1.
DATA: END OF wa_object_fl_change.
******Object definition, change attributes
DATA: BEGIN OF wa_object_hd_change.
          INCLUDE STRUCTURE sood1.
DATA: END OF wa_object_hd_change.
******Object ID
DATA: BEGIN OF wa_object_id.
          INCLUDE STRUCTURE soodk.
DATA: END OF wa_object_id.
******Object Defintion.
DATA: BEGIN OF wa_sood.
          INCLUDE STRUCTURE sood.
DATA: END OF wa_sood.
******User Definition
DATA: BEGIN OF wa_soud.
          INCLUDE STRUCTURE soud.
DATA: END OF wa_soud.
******Sent to all flag.
DATA: BEGIN OF wa_sonv.
          INCLUDE STRUCTURE sonv.
DATA: END OF wa_sonv.
******Mail contents
DATA: BEGIN OF wa_objcont.
          INCLUDE STRUCTURE solisti1.
DATA: END OF wa_objcont.
******Mail header.
DATA: BEGIN OF wa_objhead.
          INCLUDE STRUCTURE soli.
DATA: END OF wa_objhead.
******Para A
DATA: BEGIN OF wa_objpara.
          INCLUDE STRUCTURE soparai1.
DATA: END OF wa_objpara.
******Para B
DATA: BEGIN OF wa_objparb.
          INCLUDE STRUCTURE soparbi1.
DATA: END OF wa_objparb.
******Receivers list
DATA: BEGIN OF wa_receivers.
          INCLUDE STRUCTURE somlreci1.
DATA: END OF wa_receivers.
Pack list
DATA: BEGIN OF wa_packlist.
          INCLUDE STRUCTURE sopcklsti1.
DATA: END OF wa_packlist.
DATA: BEGIN OF wa_att_head.
          INCLUDE STRUCTURE soli.
DATA: END OF wa_att_head.
********************internal tables******************************
DATA: lt_objcont   LIKE wa_objcont OCCURS 0, "mail contents
        lt_objhead   LIKE wa_objhead OCCURS 0, "mail header
        lt_objpara   LIKE wa_objpara OCCURS 0, "Paragraph A
        lt_objparb   LIKE wa_objparb OCCURS 0, "Paragraph B
        lt_receivers LIKE wa_receivers OCCURS 0," receiver list
        lt_packlist LIKE wa_packlist OCCURS 0,"Pack list
        lt_att_head LIKE wa_att_head OCCURS 0."Attachment Header
**************************Constants***********************************
CONSTANTS: lc_kreuz LIKE sonv-flag   VALUE 'X', "Outbox flag,
             lc_colon(1) TYPE c VALUE ':',
             lc_raw(3) TYPE c VALUE 'RAW',
             lc_f(1) TYPE c VALUE 'F',
             lc_u(1) TYPE c VALUE 'U'.
DATA: w_cnt TYPE i.
data : wa_edition like t_edition.
DATA : i_strlen TYPE i,
        i_off TYPE i ,
        i_len TYPE i VALUE 254,
        i_totlen TYPE i,
        lv_fill_space TYPE i,
        lv_split_times TYPE i,
        lv_len TYPE i.
**>> Populate the attachment contents.*
LOOP AT gt_output INTO wa_output.
    i_strlen = strlen( wa_output ) .
    IF i_strlen LE 254.
      CONCATENATE con_cret wa_output-buffer
           INTO wa_output-buffer.
      APPEND wa_output-buffer TO lt_att_cont.
    ELSE.               " i.e the data is more than 255 characters
     DO 4 TIMES.
        i_totlen = i_off + i_len .
        IF i_totlen = 254.
          wa_att_cont = wa_output+i_off(i_len).
          CONCATENATE con_cret wa_att_cont
          INTO wa_att_cont.
          APPEND wa_att_cont TO lt_att_cont.
        ELSE.
      wa_att_cont = wa_output+i_off(i_len). "splitting more than 255
           APPEND wa_att_cont TO lt_att_cont.
        ENDIF.
        IF i_totlen GE i_strlen.
          CLEAR : i_off .
          EXIT.
        ELSE.
          i_off = i_off + 254.
        ENDIF.
      ENDDO.
    ENDIF.
    CLEAR : wa_output.
ENDLOOP.

How can we select more than one item from LOV in Query_Find form?

Hi,
I have a requirement i.e i want to select more than one customer number seperated by comma from the customer number lov field in the query_find form.How can we write the code for this requirement?
and after clicking find it has to display notification form which contains the details of customer which you selected from Custome query_find form.
Could you please help me out.
Thanks in Advance,
Dhana

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

Need Help, how to create more than one rectangle from one button in one stage of canvas

Dear Guys,
I has problem to create more than one rectangle canvas from one button. here my role to create :
1. I create input size with textfield
2. I click button called "submit query"
3. My web will create a rectangle with specific size.
My problem come when I click again the button, my old rectangle has been remove than my new rectangle has created.
My question is : how I can create more than one without delete/remove the old I was created?
Here my Code :
<head><meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><link rel="stylesheet" type="text/css" media="all" href="css/style.css"><script src="kinetic-v4.7.2.min.js"></script></head> <body><label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5"><br> <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5"><br> <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5"><br> <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="5" maxlength="5"><br> <input name="submit" type="submit"> <script defer>              var stage = new Kinetic.Stage({                container: 'container',                width: 943.5,                height: 254.10              });              var layer = new Kinetic.Layer();              var rectX = stage.getWidth() / 2 - 50;              var rectY = stage.getHeight() / 2 - 50;                            var group = new Kinetic.Group({                draggable: true              });                                         var box = new Kinetic.Rect({                x: rectX,                y: rectY,                width: <?php echo ($_POST['panjang']/10)/1.3; ?>,                height: <?php echo $_POST['lebar']/10; ?>,                //fill: '#00D2FF',                stroke: 'blue',                strokeWidth: 2                //draggable: true              });               var simpleText = new Kinetic.Text({                x: Math.round(box.getWidth() / 2),                y: Math.round(box.getHeight() / 2),                text: '<?php echo $_POST['tinggi'].'/'.$_POST['nam_pac']; ?>',                fontSize: 30,                fontFamily: 'Calibri',                fill: 'blue',              });                                          // add cursor styling              box.on('mouseover', function() {                document.body.style.cursor = 'pointer';              });              box.on('mouseout', function() {                document.body.style.cursor = 'default';              });                            group.add(box);              group.add(simpleText);              layer.add(group);              stage.add(layer);            </script></body>
this is my printscreen may help you to help me :
thanks before to help me
Regards,
Prabowo.

It's work Ken, but if I modify your code into my code.
error again. they say like before (...is undefined)
May You want to check my code
<?php
include('pinambung.php');
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>GI Loading Plan Maker</title>
<meta name="viewport" content="width=device-width" />
<link rel="stylesheet" type="text/css" media="all" href="css/style_2.css">
<script src="js/kinetic-v4.7.2.min.js"></script>
<script src="js/CalendarPopup.js"></script>
<script src="js/jquery-1.10.2.js"></script>
</head>
<body>
<header class="w" id="header"> 
      <img src="images/headers.jpg" width="100%" height="100%" />
</header>
<nav class="w" id="nav">
      <?php include('top.php'); ?>
</nav>
<section class="w" id="main">
      <section id="content">
      <article>
        <h2>Customer Info</h2>
        <form id="myForm" action="insert.php" method="post">
        <label>Customer Name :</label><input name="cs_name" id="cs_name" type="text" size="25" maxlength="50">
        <br>
        <label>Date of Shipment :</label><input name="shipment_date" id="shipment_date" type="text" size="10" maxlength="12" > use format : YYYY-MM-DD
        <br />
        <label>Container Name :</label><input name="con_num" id="con_num" type="text" size="10" maxlength="12">
        <label>Revision :</label><input name="revision" id="revision" type="text" size="5" maxlength="5"><br />
        <label>Prepared by :</label><input name="prepared_by" id="prepared_by" type="text" size="25" maxlength="50">
        <button id="saveinfo">Save As DB</button>
        <button id="saveall">Save As Image</button>
        <button id="print" onclick="window.print();return false">Print</button>
        </form>
        <span id="result"></span>
        <script type="text/javascript" src="js/insert.js"></script>
      </article>
          <br /><br />
      <article>
          <h2>Packing Info</h2>
        <label>Container Type :</label>
        40' HC<input name="con_type" type="radio" id="con_type" value="40hc">
        40'<input name="con_type" type="radio" id="con_type" value="40">
        20<input name="con_type" type="radio" id="con_type" value="20"><br />
        <input name="loadstan" type="button" value="Create Container" id="isSelect">
        <button id="removecon">Remove Container</button>
        <br />
        <label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5">
        <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5">
        <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5">
        <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="20" maxlength="55">
        <input name="loadstan" id="loadstan" type="button" value="Load Standard Packing" onclick="window.open('spk.php', 'winpopup', 'toolbar=no,statusbar=no,menubar=no,resizable=yes,scrollbars=yes,width=300,height=400');">
        <input name="submit" type="submit" value="Create Box">
        <button id="remove">Remove Box</button><br />
      </article>
    </section>
    <aside id="sidebar">
      <label for="layer-to-delate">Select a layer to delete or rotate</label><br />
      <select id="layer-to-delete" size="14"></select><br />
      <input id="delete-layer-button" type="button" value="Delete layer">
      <input id="rotate-layer-button" type="button" value="Rotate box">
    </aside>
    <section id="content2">
      <div id="container">
      </div>
      <script defer>
      function radians (degrees) {return degrees * (Math.PI/180)}
      function degrees (radians) {return radians * (180/Math.PI)}
      function angle (cx, cy, px, py) {var x = cx - px; var y = cy - py; return Math.atan2 (-y, -x)}
      function distance (p1x, p1y, p2x, p2y) {return Math.sqrt (Math.pow ((p2x - p1x), 2) + Math.pow ((p2y - p1y), 2))}
        var stage = new Kinetic.Stage({
            container: 'container',
            width: 943.5,
            height: 254.10
        var layers = new Array();
       function addCont(){
           layer2 = new Kinetic.Layer();
            switch ($('input:radio[name=con_type]:checked').val()){
              case '40hc':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 HC (11900mm X 2300mm X 2550mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '40':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 (11900mm X 2300mm X 2250mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '20':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 580/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 20 (5800mm X 2300mm X 2250 mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
        function addRect() {
            layer = new Kinetic.Layer();
            var box = new Kinetic.Rect({
                x: 10,
                y: 10,
                width: +(($("#panjang").val()/10)/1.3),
                height: +($("#lebar").val()/10),
                stroke: 'blue',
                strokeWidth: 2
            var group = new Kinetic.Group({
                        draggable: true,
                        snap : true
            var boxLabel = $("#nam_pac").val() + "/H : " + $("#tinggi").val();
            if (($("#panjang").val() && $("#lebar").val()) != 0) {
            var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: boxLabel,
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            } else {
                var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: '',
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            group.add(box);
            group.add(simpleText);
            layer.add(group);
            stage.add(layer);
            layers.push(layer);
            $("#layer-to-delete").append("<option>Layer " + boxLabel + "</option>");
        function deleteRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers.splice(i,1)[0].destroy();
            $("#layer-to-delete > option").eq(i).remove();
        function rotateRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers[i].rotateDeg(30);
            layers[i].draw();
        $("#delete-layer-button").click(function(e) {
              deleteRect();
        $("#rotate-layer-button").click(function(e) {
            rotateRect();
        $("input[type=submit]").click(function(e) {
            addRect();
        $("#isSelect").click(function () {
              addCont();
        $("#removecon").click(function () {
              layer2.destroy();
        $(window).keypress(function(e) {
            if(!$(document.activeElement).is("label")) {
                if((e.keyCode || e.which) == 46) {
                    layer.destroy();
            if((e.keyCode || e.which) == 35) {
                    layer2.destroy();
        document.getElementById('saveall').addEventListener('click', function() {
          stage.toDataURL({
            callback: function(dataUrl) {
                  window.open(dataUrl);
        }, false);
      </script>
    </section>
</section>
<footer class="w" id="footer">
    Copyright <a href="login.php" target="_new">©</a> 2013, <a href="http://omhanggar.com" target="_new">created</a><a href="http://intranet.guentner-asia.com" target="_new"> by PT. Güntner Indonesia </a>
</footer>
</body>
</html>
thanks again before,
Prabowo

How to use more than one ipod from one computer

I've got my 30gb ipod set up and working fine from my pc. I've got my wife an ipod nano and want to set her's up totally separately. How can I do this?

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single Mac or Windows user account
c) Creating multiple Mac or Windows user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): iPod - Syncing Music
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create A New User Account In Vista

How to import more than 2k items from Excel(2010) to SharePoint 2010 List?

Similar Messages

Maybe you are looking for