How to include Add-On in EHP4 Installation

This is a fresh install on Unix and Oracle.
We have already installed ERP 6.0 EHP4 Ready and now preparing for EHP4 Install using EHP Installer. We have two Add-Ons CPRXRPM 400 and ECC-SE 604 that we want to include in EHP4 installation. We have already copied the .SAR files for both Add-Ons into Download Directory.
I am not able to figure out how to make Installer pick up these Add-Ons. In BIND_PATCH step and (also in screen where it displays calculated queues) I see all the patches that we downloaded from Solution Manager are listed but do not see my Add-ons. At what stage will these be included or do I need to do something to add them manually.?
Zak

Hi,
When you will download the patches from solution manager there you need to select Technical Usage corresponding to these packages then information about these technical usage will be present in stack xml file. So, ehpi installer will read about these packages from stack xml file and include them in upgrade.
Thanks
Sunny

Similar Messages

How to include external files when building installer for a standalone executable?

Hi,
I was trying to build a stand alone executable from my Labview project and I was able to do it successfully. Now I would like to include a few external .txt files in the installer. Those .txt files have parameters/constants that will be used by the program, and my program needs to load/read them when running. For now I have to manually copy/paste them into the target machine, but I really hope the installer can do it automatically. I see there is a "data" folder in the installer, and that's where I hope those .txt files can be added into.
How can I do it? Can anyone give me some suggestions? Thanks!
Rgds
Harry
Solved!
Go to Solution.

Norbert,
I could not find "Add file" when right clicking the project. See attached image please. Under "Project" I do have a "Add to project" but there is no option for external files. I did not find "Source" location either.
What did i do wrong? Is there any version requirement here? I have a 2010 base version. Thanks for your help.
Rgds,
Harry

How to include help files when building installer

Hi!
How can I include my application help manual (in .pdf format) when building the installer such that the file goes into a designated folder and its link appears in the Start>Programs>App folder ?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Gurdas,
Add the .pdf as a support file in your executable
Create an installer for the executable
Under the "Files" button on the "Installer" tab select the .pdf and select "create program item".
This will place the .pdf in the start menu program group.
cheers,
Brett

How to include a font in the installer?

Hi all!
My program uses a custom font (namely popular NI7seg font) that I would like to include in my installation distribution.
I am using LabView 8.5 and I have tried force the installer (normally through the options window) to copy the font into [WindowsFolder]\Fonts folder and to add a registry key.
After installation I have noticed that the font actually is added into the registry however it has not be copied to the fonts directory.
Any ideas?
Regards,
Michal
Solved!
Go to Solution.

Hi Michal,
At first, you should add the font file to LabVIEW project.
Then create a Source Distribution from build specification. In the source distribution setting, you can specify where to distribute the font file.
When you build your installation, you add the source distribution as source file to installer.
I'm not sure if you can skip step 2 to add the font file as source file to installer, but source distribution could work correctly.

How to include DAQmx device drivers in installer (LV 7.1)

Hi,
We would like to build an installer that packages all required device drivers and does NOT require a separate installation from the DAQmx device driver CD.
How can we do this?
LV : 7.1 with Application Builder
H/W : USB-6009
DAQmx : 8.0
Presently, we use the DAQmx device driver CD (that accompanied the USB-6009) to install the drivers. We do not want to do it this way because:
1) It makes the installation a two-step process - (a) install DAQmx from device driver CD (b) install our application
2) It installs a lot of drivers which are not required by our application.
Thanks,
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hello Gurdas,
This question of yours brings up an issue we addressed when we released LabVIEW 8.0. In LabVIEW 8.x and later, you have the option to package multiple additional installers with your application installer.
The issue you are having is limited by LabVIEW 7.1, as it is capable of including only one additional installer. However, if you would like to create an installer in LabVIEW 7.1 and have it launch multiple additional installers, your only option is to create a batch file and have the LabVIEW 7.1 installer call this batch file.
We have KnowledgeBases available to explain this issue and the topic of creating batch files. Here are a few of these documents:
http://digital.ni.com/public.nsf/allkb/E09BA0E2F31D304F86256A640070058E?OpenDocument
http://digital.ni.com/public.nsf/websearch/B2640E34C4654F7B86256D07006D843D
Let me know if you have any further questions. Cheers!
Bob
Applications Engineering Specialist | National Instruments
-Bob

How to include hardware configuration in the installer?

I have a VI developed with LabVIEW 2009 V9.0f2 using a USB-6009 and two of its analog inputs. The VI uses the DAQ Assistant to configure the USB-6009. I include the DAQmx Core Runtime 9.0.2 with the LabVIEW Runtime Engine 2009 in the installer build. I spent most of the past week trying to get the application to run after installation.
If I leave out the Hardware Configuration from MAX (no configData.nce file) and run the installer on another machine the application produces an Error-200378 Custom Scale Specified Does Not Exist when it runs (I searched the 200378 error code - no help).
If I include the Hardware Configuration from MAX to produce a configData.nce file, and select Perform the Import Silently to Merge the Import Data when the installer is built, I get this message during the install to another computer:
.\Distribution.cpp(1902): IInstallerError 11004Developer Error. Distribution contains invalid dependencies:1. Product NI Remote Provider for MAX 4.6.1 ({FBD23528-31AC-412A-9DEE-6CEA814A7430}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.2. Product NI LabVIEW Real-Time Error Dialog ({297FA251-FF30-4F16-978C-4A65EA804EFF}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.3. Product NI LVBrokerAux 8.2.1 ({0FB31DF8-38DF-4C9D-B313-AFAFC3FBA02B}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.Correct the distribution and try again. I’m not really sure that the installer even uses the configData.nce file during the build.
Another error I have seen (I have done several other builds using various installer settings) is that the app appears to run fine except it is unable to find the USB-6009, even though the operating system picks it up and installs it in the device manager seemingly without error.
I am a novice LabVIEW user. Any help you could give would be greatly appreciated.
Bill
Solved!
Go to Solution.

Hi Willygene,
Give the steps listed in KnowledgeBase 52GH9OW5: Why Do I Get Error 200378 When Running a Stand Alone Application? a shot, does this help with the 200378 error?
Do you have DAQmx installed on the other machine? Are you unbundling it with your installer? If so, what Run-Time Level are you buiding into your installer? Can you post screenshots of the errors that you are getting?
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

How Do I Add Partitions After Bootcamp Installation?

I want to have Windows 7 on my late 2013 Macbook Pro 13 to run applications not available on OSX. I need a small separate partition to store files for one of the applications that runs under Windows. On my older PC Windows machine I have C:\ that contains 98% of the data and a separate partition that acts as a separate drive (M:\) to store library files. This is a local copy of a server that I carry on my MBP, and doing this as I've done keeps the configuration files (that point to the server M:\) on my MBP consistent with desktop machines that actually point to a network shared drive (M:\). I just sync my small partition with the server every so often to keep my MBP functioning when I'm disconnected from the server. Now the problem. I can install Windows via bootcamp and that creates a C:\ (Windows partition) and gets Windows up and running. I have already learned the hard way about adjusting the partitions after bootcamp installation (I've rebuilt my Mac about 3 times ). I have been able to create the correct number of partitions by running the bootcamp assistant, creating the bootcamp partition, rebooting and <option> booting back to OSX, before installing Windows to add this 10GB partition (as FAT32) for my "M drive". Now after creating the "M drive" partition, I booted back into the Windows install disk (which has issues with USB drivers not functioning which I got past) and now I find out Windows will not install because it can't format the bootcamp partition since it will be a 5th primary partition and Windows 7 only supports 4 primary partitions on a drive. Is there a better way (without virtual OSs)?

Not possible. Boot Camp only works for two partitions - the OS X one and the Windows one. That's it. If you attempt to put a third partition on the drive, then Boot Camp is no longer able to manage the drive and you will lose the required boot loader for Windows. Getting things back to normal will then require repartitioning the drive back to one volume and reinstalling OS X from scratch.

How to add DNS entry Post Installation in Solaris 10?

Hi, I have installed Solaris 10 without mentioning the DNS entry while installation. How do I add that now in order to make that Solaris 10 to get connected to Internet ?
Thanks in Advance.
Girish Prabhakara.

Solaris 10 changed the way that some things work regarding networking, but this should still work.
1. Change the hosts: line in /etc/nsswitch.conf to include dns.
For example, change:
hosts files
to
hosts files dns
2. Create /etc/nsswitch.conf with the IP addresses of your DNS servers:
Example:
nameserver 192.168.1.100
nameserver 192.168.2.100
3. kill -HUP 1
4. Run nslookup or ping another server via host name (not IP address) to determine if the system is properly communicating with your DNS servers.

How to include required hardware drivers (eg Agilent E5515C) to installer?

Please advice how to include the reqiured instrument driver to the installer?

Hi Eva,
Many instrument drivers that are specifically for LabVIEW are simply a group of VIs. Most of the time, when you use these VIs in a project, they are automatically included under Dependencies. LabVIEW should add only the VIs you used in your project and you can see what gets added by expanding Dependencies.
I’m not sure about the E5515C, but if it is similar to most drivers for Agilent equipment, you can probably manually add the libraries (.LLB) to the project under My Computer. By dragging and dropping a .LLB on My Computer in your project, you should see a folder created and that folder should contain all the VIs in that .LLB. These can then be set as source files in the installer and will be place on the target machine.
Finally, if your ultimate goal is to have the instrument driver installed on the target machine in the same way as it is on your development machine, this is probably best left as a separate install. The information in the two above paragraphs is relevant to simply distributing a working application not recreating a development environment.
Charlie M. CLD

How to add new operand in installation facts through FMs

Hi,
Please guide me for the following query:
How to add new operands in installation facts through Function Module?
Please guide me with any function module through which i can acheive the above requirement.
Thanks and Regards

Hi,
Thanks for your reply please.
Through the BAPI which you have specified i have not been able to add any new operand in the installation facts.
Please guide me with the parameters which are required to be passed to create a new operand entry in the installation facts.
Please guide.
Thanks and Regards
Edited by: MP Vashishth on Aug 11, 2011 1:43 PM

I upgraded from Photoshop Elements 6 to 12. But 12 doesn't include Arno Pro or Rockwell fonts. How do I add them to Elements 12 without paying for them again?

I upgraded from Photoshop Elements 6 to 12. But 12 doesn't include Arno Pro or Rockwell fonts. How do I add them to Elements 12 without paying for them again?

https://www.google.com/search?q=Arno+Pro+or+Rockwell+font&oq=Arno+Pro+or+Rockwell+font&aqs =chrome..69i57&sourceid=chrome…
https://www.google.com/search?q=Arno+Pro+or+Rockwell+font&oq=Arno+Pro+or+Rockwell+font&aqs =chrome..69i57&sourceid=chrome…

How do you add existing plugins to a new Photoshop cc installation?

How do you add existing plugins to a new Photoshop cc installation?

If it's CC or CC 2014, you check with your plugin makers and download their latest installer. Never attempt to move plugins from an old to a new install.
Gene

I installed the Illustrator 2014 in its English version, but I need the Hebrew support too (ME). How can I add it to my current installation?

Hi,
I’d purchased the full CC 2014 and downloaded from your web site.
Unfortunately, I installed the Illustrator 2014 in its English version only and I would like to install the Illustrator ME with
Hebrew support as well as right to left support.
How can I add the Hebrew support to my current installation?

Hi Hans-Günter,
Thank you for your quick reply, I looked at the website and if I understood correctly, in order to change my CC applications to support the ME/RTL I must
un-install the Illustrator 2014, and re-install it, selecting this option in the Language preferences.
Do I need to re-install the whole CC package? or only the Illustrator?
Gabi

On my Apple iphone 4, how do I "Add Acct" to mail,contactscalendar settings to include MS Outlook in Windows 7?

On my iphone 4 settings-- how do I "ADD ACCOUNT" on mail, contacts, calendars, should I wish to BACKUP my icloud settings to my MS OUTLOOK on my Windows 7computer? The only MS accounts listed on the iphone ate MS Hotmail and MS Exchange, but not Outlook! Under "Other" I am offered an option to Add a LDAP Acct or a CardDAV acct-- don't know how to configure my iphone contacts with MS Outlook. Please advise.
Paul

NOT on your phone. In iTunes on your computer.

How can I add a second authorized user to my installation of Adobe Digital Editions?

I have initially installed with one user. I have purchased a digital book using my credit card and id from Barnes & Noble. I can't open the content without proper ADE authorization. How can I add another user authorization to ADE?

Paul, if you used one ID to install ADE, you cannot download an ebook from
a site into ADE if you used a different ID. That's the way the Digital
Millenium Copyright Act of 2000 was implemented to prevent unauthorized
copying of ematerials. ADE tells you that in its HELP section. You can't
add a second ID to ADE either, for the same reason.
What you CAN do is to change users, and authorize ADE with the same ID you
used when you downloaded the ebook. You do this by bringing ADE up, then
using the CNTLSHIFTD key combination, you will deauthorize ADE. Close
ADE and reopen it, and ADE should ask you to authorize it. At this point,
you can enter the second ID, and ADE will take off from there. BUT, keep
in mind that any other ebooks you downloaded into ADE with the first ID
will not be accessible until you go through the same process again and
revert to the first ID.
Hope this helps!
=============

How to include Add-On in EHP4 Installation

Similar Messages

Maybe you are looking for