How to include preUUTloop results in report?

In preUUTloop the operator is polled to choose a few parameters (messages with 2-3 buttons to choose from)
How do I record his choces in the report?
Desirably, this data should be reported in the very beginning on the report only, not in every UUT loop.
TS3.5
Thank you!
Message Edited by fomine on 08-25-2008 09:13 PM

Hi,
Take a look at this example.
I have attached it to every uut just to demonstrate how it works
I your case i would also override the ModifyReportHeader Callback and add it Report header
wich is a little bit of work.
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
PreUutToReport_TS35.seq ‏25 KB
PreUutToReport.seq ‏6 KB

Similar Messages

How can we generate result set report?

how can we generate result set report ?means the out put of one query be the input of another query?how it is?

Hi
You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
Check this link
http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
Regards

How to include row count in report

I have a report which shows list of available classes for students to register. One table called reg (which is not included in the report) keeps student_id and class_id numbers so that we know who signed up for which class.
I'd like to count rows in the reg table and group them by classid and then include results in the report so that we know how many students already signed up for each class. How can I do that?

I assume that you are providing the report with some SQL to pull in the available classes. Why don't you put in a sub select where you are doing a count on the other table?
So for example,
SELECT a.CLASSID, a.CLASSNAME, (SELECT COUNT(*) FROM STUDENTS where CLASSID = a.CLASSID ...Your group by, etc...) as Current FROM CLASSES

How to include a button in report header like rowspan? &logfile generation?

I am really new to this form and I have some questions on the APEX HTML DB:
The project I need to work on is like this: Based on some criteria, I need to do a database lookup. Then in the result, I need to be able to edit the individual record. So far it is no problem. Here comes the part that I am not sure how to handle or if it can be handled.
1. We need to have the ability to copy down certain columns value to selected rows. Therefore, a "copy down" button needs to be included right under the column header cell. For example, based on certain criteria, the following product information is returned: product description, serial number, price, category etc. The “COPY DOWN” button needs to be listed right under the “serial number” table header and before the first row of the result, like “rowspan” in html table header. Once you click on “copy down”, the first rows’s serial number will be copied to all selected rows “serial number”. – Can a button be put right under a column header? If so, can I even reference the cell value in javascript?
2. Since we are doing the batch update, I need to have the ability to maintain a logfile to include date and time and what information is modified. – Can I generate a logfile from APEX HTML DB?
I am not sure APEX HTML DB is a good candidate for the above two tasks.
Your help is greatly appreciated.

Hi user572980,
Welcome to APEX... the more you'll do with it, the more you'll like it.
1) Are you using a Tabbed Form? Or are you in a report? I try to get a better idea what you're trying to do. Did you already have a look at the templates? You can have a template for the report for ex., in that you can adapt like you wish (in your case put a button under the column header).
You can also reference the cell values, but for that I should know where you're in (form, report). When you click right on the page and have a look at Page Source you see what item (reference) it is.
2) You can make a logfile yes. Are you using packages to do the batch update? In that you can make some code to store the history. In otherwords, out-of-the-box in APEX I don't think it exists, but with PLSQL you can do it (so also in APEX). For ex. the plsql package stores it in a history table and you built a report on top of that.
Dimitri

How to include #/Blank Value in Report

Hi,
Our cube is loaded with Flat file,The cude didn't had any master data only transaction data.The records are based on user name in flat file there some records with out user name in flatfile with BLANK which is #
The data is loading into cube where blank is loaded as balk spack
but in report i want to restrict the user name to exclude the bank (User Name) Records with out user name...But the # is not appearing in the user name list in Bex to restrict...how can i include the #
Thanks

Krishna,
In the report you want to exclude the data where username is #. Correct? And when you try to do that in the Query Designer, you don't see the # value in the list?
In the list if you dont see it, simplest way is this... There is a search box at the bottom of that screen. In that type #. Dont hit search. Click on the left arrow which moves the values to the right. Now right click on the value and say "Exclude from Selection".
Let me know if I understood your question correctly and if you can get it to work.
Gova

How to include images in BAM reports

Hi all,
In Oracle 11g BAM , i can see some already existing Demo reports, i the Active Studio.
in that demo reports i can see a report called SLA Violation.Here in this SLA Vioaltion report there is Updating Orderded list within the list they are showing some images .
can some one help me how to add images like that..? or tell me the steps..
i tried creating the similar updating ordered list in my sample report and gave the image links gived in that demo report
" _switch({Process Due Soon SLA}) case(true):(<img src='../Images/TradeSubmitted.png'/>Submitted) default( <img src='../Images/TradeFine.png'/>Fine")_but in the updated ordering list instead of the image im getting entries like this " ):(<img src='../Images/TradeSubmitted.png'/><span style='padding"
Any suggestions on this is Really appreciated..
TIA,
Karthik
Edited by: karthik !! on 20 Jun, 2011 7:28 AM

Hi,
I have used four different ways to display images in my applications depending on which method is the fastest to refresh.
1. Under Application Attributes > Edit Standard Attributes > Substitutions enter your substitution string (MY_IMAGE_URL) and substitution value(http://somewhere/img)
and then in the region or template use the following syntax &MY_IMAGE_URL. in your html tags eg. img src="&MY_IMAGE_URL./banner.png" width="x" height="x">)
I have found this the best for image refresh speed, especially if the image is already cached.
2. Load your image up into Apex and don't associate it with any application and use the following tag img src="#WORKSPACE_IMAGES#banner.png" width="x" height="x" alt="">
Good for development as all images not associated to an application are available.
3. Load your image up into Apex and associate it with an application and use the following tag img src="#APP_IMAGES#banner.png" width="x" height="x" alt="">
This can be a pain during development when your application numbers continually change.
4. Use standard http address <img src="http://somewhere/banner.png" width="x" height="x">
Ben
Message was edited by:
Benton

How to include "alias" in custom report

Is there a method for generating a report in Zen 10.1 that will include the name of the computer assigned in zenworks (Alias)? I have tried all obvious choices such as machine name. Its possible to report on the folder that contains the computer but why not the computer's alias itself?

ABunker,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How to apply condtion formula inside Report Writer and Report Painter

Hi anybody,
I am doing report painter. but i don't know how to include condition formula inside report painter or report writer. ex if condition ..
Anybody please explain to me the steps of report writer how do this.
I will appreciate goods answers to me.
thanks
Regards,
S.Muthu
Edited by: Subramaniyan Marimuthu on Jun 3, 2009 7:50 AM

www.virtuosollc.com/PDF/Get_Reporter.pdf
This is most useful PDF written by industry expert. This is more informative.
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
Regards,
Ravi

How to include an attachment in summarize comment report in acrobat 9 Pro?

I have a shared review document intiated using Acrobat 9 Pro, and some ppl have commented using the "Attach a file as a comment" tool. Now when i summarize my comments that attachment does not show up in the report, so how can include the attachment in the report?

Sorry for my late response, have been on holiday...
1) I had installed Acrobat Reader 8
2) I can see the 'Adobe PDF Reader' object in my ActiveX Controls dropdown box
3) I can add this object to a report
4) intellisense does not show the loadfile method but it changes to LoadFile and it compiles
5) displaying the report does not show anything on my report
6) using the object.src property no results either
7) I can add this object to a form
8) intellisense does not show the loadfile method but it changes to LoadFile and it compiles
9) running the form brings up a runtime error 'method not found'
(that's different behaviour as in the report !!!)
10) using the object.src property gives FINE results!!!!
Almost the same behaviour was mentioned in a topic by Bob Wintemberg, http://www.adobeforums.com/webx/.3bc443d7 , but there was no final solution mentioned!
Any help would be very appreciated!
BTW i looked in the 'Developing Applications Using Interapplication Communication' document but that does not bring my any additional knowledge!
Rein Hermens

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

How to include Material Cost in the SD report

Hi,
I am working on Cube 0SD_C03 for the Sales and Distribution Report "Sales Contribution - Product Wise u2013 KPI" where I have to show the following information which are given below.
1. Total Sales Qty.
2. Total Sales Value
3. Total Material Cost
For third one I do not know how to include this in this SD report.
so please tell me about this if anybody has idea about this?

Hi Francisco,
Note:
your xml should only have
<URL>http://dbxserver.dbxprts.com:7778/pls/apex/f?p=134:1:::NO::P1_ID_CONSTANCIA:1183</URL>
Show me your sample XML , i can help you.
What is your expected output ? PDF or HTML ?
here it is.
option1:
If the XML data includes an element that contains a hyperlink , then you can use that element to create dynamic hyperlinks at runtime.
a. insert hyperlink from word menu
b. In the Type the file or Web page name field of the Insert Hyperlink dialog box, enter the following syntax:
c. {ELEMENT_NAME_WHICH_HAS_URL_LINK}
where ELEMENT_NAME_WHICH_HAS_URL_LINK is the xml data element name
option2:
create a form field, you can add it
<fo:basic-link external-destination="http://www.google..com">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link external-destination="{ELEMENT_NAME}">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link>
<xsl:attribute name="external-destination"><xsl:value-of select="ELEMENT_URL"/>
</xsl:attribute>
<xsl:value-of select="LINK_NAME"/>
</fo:basic-link>

How to include variable in the text column in report painter?

Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

How to Include JAVA script code in SAP BI7 web Reporting?

How to Include JAVA script code in SAP BI7 web Reporting?

In nw2004s there is a new web item called "Script" web item which lets you add javascript code. When you add javascript code in this web item, you don't need the opening and closing <script> tags...
Hope it Helps
Chetan
@CP..

How to include a report into the SAP-SCRIPT

plz tell me
How to include a report into the SAP-SCRIPT
ASAP

creat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*&      Form get_data1
      text
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data1 TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*&      Form get_data
      This form is to read details from LIKP    *
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
   READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM.                    "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

How to include preUUTloop results in report?

Similar Messages

Maybe you are looking for