How to include #/Blank Value in Report

Hi,
Our cube is loaded with Flat file,The cude didn't had any master data only transaction data.The records are based on user name in flat file there some records with out user name in flatfile with BLANK which is #
The data is loading into cube where blank is loaded as balk spack
but in report i want to restrict the user name to exclude the bank (User Name) Records with out user name...But the # is not appearing in the user name list in Bex to restrict...how can i include the #
Thanks

Krishna,
In the report you want to exclude the data where username is #. Correct? And when you try to do that in the Query Designer, you don't see the # value in the list?
In the list if you dont see it, simplest way is this... There is a search box at the bottom of that screen. In that type #. Dont hit search. Click on the left arrow which moves the values to the right. Now right click on the value and say "Exclude from Selection".
Let me know if I understood your question correctly and if you can get it to work.
Gova

Similar Messages

  • How to  show Blank values in Bex Report

    Hi friends ,
                       In my bex report one of the KF Column having zero's  and Blank values .
    Ex .   Mat     Price
              A         0
              B        
              C        15
                                    when i create a condition  Price > 0 
    Then the given Out put is    
                                            Mat     Price  
                                             C        15    
                                                                       but the required Out put is 
                                                                                                               Mat     Price
                                                                                                                B 
                                                                                                                C        15
    I.e  I have to Remove only zeros and i should show blank values. Could you pls give some Ideas on this .

    Hi friends thanks for response,
    but my requirement is
    Mat                 
    Price1
    Price2
    A
         0
    B
    12
    C
       15
    D
    0
    E
        8
    F
         0
    The Required  Out put should be
    Mat
    Price1
    Price2
    Price3 (1+2 )
    B
    12
    12
    C
    15
    15
    D
    0
    0
    E
    8
    8
    The user don't want see materials Price1 which  is Zero . So  I should remove materials A and F  in Price1 column .
    IF i apply condition on Price1 > 0  in the out put B and D also not displaying bcoz  blank values consider as Zero.
    Can you pls give some ideas how to full fill this Requirement

  • How to replace blank values in DATE field with 00000000

    Hi
    I have a DSO with Date field in which there are blank values. I want to replace the blank values in the DSO for date field with 00000000. Because of this blank values in the DSO the report is giving an ORA error.
    How do we replace the blank values in the DSO for historical data and also the new loads?
    Please advise.
    Thank you.
    Regards,
    Pavan.

    Hi Suman,
    I'm trying to run a query built on a DSO. The DSO has a field 'Start Date'. This Start Date InfoObject has a reference Char as 0DATE.
    This Start Field has blank values due to which I'm getting the ORA-01722 error. I came across many threads with same topic of discussion. As mentioned in one of the Threads I have written a program to update 'Start Date' with 00000000. The code wriiten is "UPDATE /BIC/AZ_MONINV00 SET /BIC/ZSTR_DTE = '00000000' where /BIC/ZSTR_DTE = ' '.
    Now when I see the data in the active data table of DSO the blank value is replaced with '00000000'.
    But If I right click on the DSO click on display data the 'Start Date' field is blank. And now the Query also gets executed without any error. But in the output of the query the 'Start Date' Field has "#" values.
    Can anyone suggest on how to remove these "#" values in the report?

  • How to get parameter value from report in event of value-request?

    Hi everyone,
    The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
    many thanks!
    Jack

    You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
    Jonathan
    report zlocal_jc_sdn_f4_value_read.
    parameters:
      p_field(10)           type c obligatory,  "field with F4
      p_desc(40)            type c lower case.
    at selection-screen output.
      perform lock_p_desc_field.
    at selection-screen on value-request for p_field.
      perform f4_field.
    *&      Form  f4_field
    form f4_field.
    *" Quick demo custom pick list...
      data:
        l_desc             like p_desc,
        l_dyname           like d020s-prog,
        l_dynumb           like d020s-dnum,
        ls_dynpfields      like dynpread,
        lt_dynpfields      like dynpread occurs 10.
      l_dynumb = sy-dynnr.
      l_dyname = sy-repid.
    *" Read screen value of P_FIELD
      ls_dynpfields-fieldname  = 'P_FIELD'.
      append ls_dynpfields to lt_dynpfields.
      call function 'DYNP_VALUES_READ'
        exporting
          dyname     = l_dyname
          dynumb     = l_dynumb
        tables
          dynpfields = lt_dynpfields
        exceptions
          others     = 1.
      check sy-subrc is initial.
    *" See what user typed in P_FIELD:
      read table lt_dynpfields into ls_dynpfields
        with key fieldname = 'P_FIELD'.
    *" normally you would then build your own search list
    *" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
    *" but this is just a demo of writing back to the screen...
    *" so just put the value from p_field into P_DESC plus some text...
      concatenate 'This is a description for' ls_dynpfields-fieldvalue
        into l_desc separated by space.
    *" Pop a variable value back into screen
      clear: ls_dynpfields.
      ls_dynpfields-fieldname  = 'P_DESC'.
      ls_dynpfields-fieldvalue = l_desc.
      append ls_dynpfields to lt_dynpfields.
      call function 'DYNP_VALUES_UPDATE'
        exporting
          dyname     = l_dyname
          dynumb     = l_dynumb
        tables
          dynpfields = lt_dynpfields
        exceptions
          others     = 0.
    endform.                                                    "f4_field
    *&      Form  lock_p_desc_field
    form lock_p_desc_field.
    *" Make P_DESC into a display field
      loop at screen.
        if screen-name = 'P_DESC'.
          screen-input = '0'.
          modify screen.
          exit.
        endif.
      endloop.
    endform.                    "lock_p_desc_field

  • How to include row count in report

    I have a report which shows list of available classes for students to register. One table called reg (which is not included in the report) keeps student_id and class_id numbers so that we know who signed up for which class.
    I'd like to count rows in the reg table and group them by classid and then include results in the report so that we know how many students already signed up for each class. How can I do that?

    I assume that you are providing the report with some SQL to pull in the available classes. Why don't you put in a sub select where you are doing a count on the other table?
    So for example,
    SELECT a.CLASSID, a.CLASSNAME, (SELECT COUNT(*) FROM STUDENTS where CLASSID = a.CLASSID ...Your group by, etc...) as Current FROM CLASSES

  • How to include the value of the discount in the stock value ?

    Hi Friends;
    Is it possible to include the value of the discount (SKTO price condition) in the value of the stock when receiving a purchase order with MIGO
    How can I accomplish this?
    Best regards

    Like this?
    Done using chart Inspector.
    For details, see Chapter 7,  Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
    Regards,
    Barry

  • How to return blank value for a column

    Hi All
    We would like to create a short version of the BI report for the scorecards that has the same number and order of the columns, but far less rows. This will improve the size and performance of the Overhead, Services scorecard.
    For some columns, we need blank values , which means the content should be blank , but the column should appear in the report.
    I have tried checking some options in "column format" tab under column properties and played with "column header interaction" and "value interaction" , however i couldnt get the desired results.
    Can we achieve this?
    Please suggest me on the same.
    Regds
    Mano

    Mano wrote:
    For some columns, we need blank values , which means the content should be blank , but the column should appear in the report.Can you not just add any colulmn from the subject area and change its formula to '' ? You can rename the column name, and it will show blank values for all the records.
    Assign points if helpful.
    Regards,
    -Amith.

  • How to remove blank pages from report

    Hi All
    i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
    any clue would be very helpful.Thanks in advance
    Thanks
    Pratap

    Hi All
    The solution of this issue is given in below mentioned thread
    How to avoid blank page in BI Publisher
    Thanks a lot to Vestrini :)
    Thanks
    Pratap

  • How to supress blank fields in report ??

    Hi all,
               i am trying to build a report which should give only result row infront of each customer..i dont want any keyfigure details..i tried SUPRESS RESULT in CACULATE SINGLE VALUES AS in keyfigure properties but its giving blank fields in place of single values..How do i remove this blank fields..
    Any idea pls share..
    regards,
    Rajendra

    hi gill,
              yes the layout is same as u mentioned..
               ROWS   -
    COLUMNS
    customer-net due date----balance-formula-formula
    net due date is used as replacement path variable to calculate other formulae.
    if i take out net due date from rows my formulae are not working.
    i tried SUPRESS RESULT in CALCULATE SINGLE VALUES AS..its giving only result BUT in place of single values its giving me blank fields..i dont want those blank fields..:-(
    regards,
    Rajendra

  • How to include a button in report header like rowspan? &logfile generation?

    I am really new to this form and I have some questions on the APEX HTML DB:
    The project I need to work on is like this: Based on some criteria, I need to do a database lookup. Then in the result, I need to be able to edit the individual record. So far it is no problem. Here comes the part that I am not sure how to handle or if it can be handled.
    1.     We need to have the ability to copy down certain columns value to selected rows. Therefore, a "copy down" button needs to be included right under the column header cell. For example, based on certain criteria, the following product information is returned: product description, serial number, price, category etc. The “COPY DOWN” button needs to be listed right under the “serial number” table header and before the first row of the result, like “rowspan” in html table header. Once you click on “copy down”, the first rows’s serial number will be copied to all selected rows “serial number”. – Can a button be put right under a column header? If so, can I even reference the cell value in javascript?
    2.     Since we are doing the batch update, I need to have the ability to maintain a logfile to include date and time and what information is modified. – Can I generate a logfile from APEX HTML DB?
    I am not sure APEX HTML DB is a good candidate for the above two tasks.
    Your help is greatly appreciated.

    Hi user572980,
    Welcome to APEX... the more you'll do with it, the more you'll like it.
    1) Are you using a Tabbed Form? Or are you in a report? I try to get a better idea what you're trying to do. Did you already have a look at the templates? You can have a template for the report for ex., in that you can adapt like you wish (in your case put a button under the column header).
    You can also reference the cell values, but for that I should know where you're in (form, report). When you click right on the page and have a look at Page Source you see what item (reference) it is.
    2) You can make a logfile yes. Are you using packages to do the batch update? In that you can make some code to store the history. In otherwords, out-of-the-box in APEX I don't think it exists, but with PLSQL you can do it (so also in APEX). For ex. the plsql package stores it in a history table and you built a report on top of that.
    Dimitri

  • How to enable repetitive values in report.

    hi,
    I dont want to supress values in my report. my report is being displayed  in following way.
    plant     price
    1000     200
    blank    300
    blank    400
    2000     500
    blank    600.
    But i want to display the report in following way. I want plant (characteristic)value to be displayed in every row instead of one time in first occurence.
    plant     price
    1000     200
    1000     300
    1000     400
    2000     500
    2000     600.
    Is this possible in BW 3.5?
    Thank you in advance.

    thank you very much for your reply. But here plant is not a key figure. I have unchecked 'hide repeated key values' option. but I did not get the required result.
    I want the plant values (char) to be displayed in each row. As of now, plant values are being displayed only one time (only first occurance).
    pls reply. points assigned.

  • How to get negative values in Report?

    Hi,
    i have to do 1 FI report in that if it's debited value have to come negative. How can i do the same?

    see this example
    IF ittaxdet-shkzg = 'H'.
                     itsumtax-add_tax  = ittaxdet-hwste * -1.
                   else.
                       itsumtax-add_tax = ittaxdet-hwste.
                   ENDIF.

  • How to display customize values in report?

    I need to be able to show certain customize values in a report portlet. Preferably just above the table of results. How do I do that?
    Grateful for any help...
    Bryan

    Hi Bryan,
    If customized values means the parameters of the dynamic report you can do the following:
    <ORACLE>
    Declare
    v_deptno number :=(:deptno); /* :empno is the bind variable*/
    Begin
    htp.p('<table border=1>');
    htp.p('<tr>');
    htp.p('<td>');
    htp.p('<FONT face="Times New Roman" color=#000080 size=+1>');
    htp.p(v_deptno);
    htp.p('</FONT>');
    htp.p('</td>');
    htp.p('</tr>');
    htp.p('</table>');
    htp.p('<BR>');
    htp.p('<table BORDER=1 WIDTH=100%>');
    htp.p('<tr>');
    htp.p('<td nowrap bgcolor=#6666CC align=left><FONT face="Times New Roman" color=white><B><U>Last Name</U></B></FONT></td>');
    htp.p('<td nowrap bgcolor=#6666CC align=left><FONT face="Times New Roman" color=white><B><U>First Name</U></B></FONT></td>');
    FOR c IN (SELECT lastname, firstname from emp where deptno = v_deptno) LOOP
    htp.p('</tr>');
    htp.p('<td nowrap align=left>');
    htp.p('<FONT face="Times New Roman" color=#000080 size=-1>');
    htp.p(c.lastname);
    htp.p('</FONT>');
    htp.p('</td>');
    htp.p('<td nowrap align=left>');
    htp.p('<FONT face="Times New Roman" color=#000080 size=-1>');
    htp.p(c.firstname);
    htp.p('</FONT>');
    htp.p('</td>');
    htp.p('</tr>');
    END LOOP;
    htp.p('</table>');
    END;
    </oracle>

  • How can i display Value in Report which i select from Multiple select list

    Dear All,
    i am using multiple select List in form with report page.
    When i create new Entry with select Multiple value in Multiple Select List then in report Value display me in below format
    my SQL Query are
    select NAME D, CODE R from  COUNTRY_MAS WHERE ACTIVE_FLG ='Y' order by NAME
    AS:AI:AG:AM these are return value .i want to display NAME in report .
    How can i do this ?
    Thanks
    Edited by: Vedant on Apr 25, 2012 11:14 PM

    Short answer, use the apex_util.string_to_table to convert to a table; then you can either iterate through the table to generate a string of names, or accomplish the same with a bulk operation.
    http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDFEEJD
    Encapsulate all this within a pl/sql function.

  • How to restrict  redundant value in report while using left outer urgent

    Hi frineds
          i am developing pp report,
    i am using the select query,
      the output instead of one i ,got two for every one
    ex reason badm-- onlyone
    but igives badm
                    badm
      SELECT FMATNR FAUFNR FPSMNG GXMNGA GPERNR GBUDAT GGRUND GVORNR  GAUFPL  GIEDD H~GRDTX INTO CORRESPONDING FIELDS OF TABLE IT_AFPO_IDEL
             FROM AFPO AS F
             INNER JOIN AFRU AS G ON FAUFNR = GAUFNR
            INNER JOIN TRUGT AS H ON GGRUND = HGRUND
             LEFT OUTER  JOIN TRUGT AS H ON GGRUND = HGRUND
             WHERE F~MATNR IN S_MATNR AND
                   F~AUFNR IN S_AUFNR   AND
                  G~ISDD IN S_ISDD AND
                   G~IEDD IN S_IEDD AND
                   G~WERKS IN S_WERKS AND
                   G~XMNGA <> 0 .
    how can i restrict ,give me solution ,very urgent
    Thanks in advance
    Regards
    ds

    Hi Chandran,
                I got that Idea too. I created a authorized customer, I created a authorized Object and assigned to a role.But in the role, when I am changing the object to generate profile, it is asking to select list of customers from the customer table.If the customers are always constant then this would work,  but in my scenario, customers for the sales rep changes over time and when I ever reps open the query, they should see updated list of customers assigned to them only, as we update the master data everyday from source system and that shud reflect in the value help.
    I am trying User Exit to achieve this, but I am not getting proper ideas how to do this.
    Any Help on this issue with user exit code???
    Thanks in Advance
    regards,
    PNK

Maybe you are looking for