How to increase code in Answers
I have a report with many columns that it has a lot of code each one.
My dashboard page shows an error produced by the code generated in my report.
Is there any place to increase lines of code of my report??
Thanks!!!
Inside of my columns I have code like this:
"FILTER(CASE WHEN "Dim Concept".Concept IN ('Concept01','Concept02','Concept03','Concept04','Concept05','Concept06','Concept12','Concept14','Concept17','Concept21','Concept31','Concept33','Concept45','Concept46','Concept47','Concept48','Concept49','Concept50','Concept51','Concept52','Concept53','Concept54','Concept55','Concept56','Concept57','Concept58','Concept59','Concept64','Concept67','Concept68','Concept79','Concept80','Concept81','Concept83','Concept85','Concept86','Concept87','Concept88','Concept89','Concept90','Concept95','Concept96','Concept97','Concept98','Concept99','Concept101','Concept103','Concept104') THEN IFNULL("- Actual".Measure, 0) END USING ("Dim Date Month"."Month" = '@{month}'))"
I have a lot of columns in my report and it works wrong for this cause because if I delete concepts my reports works fine...
Similar Messages
-
HOW to increase code column length in se38
hi,
i am trying to copy paste code ( SE38) from one server to another but
it showing error while pasting i.e code column lenght . on previous server column length
was more than 125 charater per line. but here i am getting only 68 charater per line.
so how can i increase the length of charater per line.
please help me....
Manoj...hi,
follow this
REPORT zsample NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65
MESSAGE-ID yy.
~linganna -
How to increase Code folding tag width
Is there a way to increase the "hint" size of a folded (collapsed) code tag. I only get about 4 letters which is not enough to tell me what the folded code is.
Thanks !Well that's too bad, the tag doesn't tell you enough to be useful as a placeholder and you have to select the tag for the tooltip to work. They really need a pref to set the width. This just makes this feature all but useless to me.
-
How to code on button click how to increase row height in iphone/ios/uitableview
how to code on button click how to increase row height in iphone/ios/uitableview
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath;
pppp=[postText objectAtIndex:indexPath.row];
CGSize maxSize = CGSizeMake(280, MAXFLOAT);//set max height
CGSize cellSize = [pppp sizeWithFont:[UIFont systemFontOfSize:14]
constrainedToSize:maxSize
lineBreakMode:NSLineBreakByWordWrapping];//this will return correct height for text
// return cellSize.height+115;
BOOL isSelected = [self.selectedIndexPaths containsObject:indexPath];
CGFloat maxHeight = MAXFLOAT;
CGFloat minHeight = cellSize.height+115;
CGFloat constrainHeight = isSelected?maxHeight:minHeight;
CGFloat constrainWidth = tableView.frame.size.width - 20.0f;
NSString *text = hChildPost[indexPath.row];
CGSize constrainSize = CGSizeMake(constrainWidth, constrainHeight);
CGSize labelSize = [text sizeWithFont:[UIFont systemFontOfSize:15.0f]
constrainedToSize:constrainSize
lineBreakMode:NSLineBreakByCharWrapping];
// return MAX(labelSize.height+75, 100.0f); return MAX(labelSize.height+75,cellSize.height+115);
i used this code but it crashed appOn what line did it "crashed app" and what was the exception? The line within this function, not in main.m. If you haven't figured this out yet: view the debugger output, try single stepping, and/or add NSLog messages in the function.
-
Hi,
1. How to di-activate <CR> 'Enter Key' HTML Code?
2. How to increase the the font of DW Help Explanations?1. How to di-activate <CR> 'Enter Key' HTML Code?
Enter = paragraph <p>
Shift + Enter = line break <br>
To adjust browser default line spacing between paragraphs and headings, use CSS.
p {
text-indent: 4em;
margin-top: 0;
margin-bottom: 0;
line-height: 1.2em;
Does this help?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
Tutorials - http://w3schools.com/ -
How to increase TD width in SAP using HTML code in mail body
Dear guru.
how to increase TD width in SAP using HTML code in mail body
Sample Code :
CONCATENATE '<tr height= "3%"> <td style="background-color:#CCC8AA;" style="font = 12.0" colspan = 3 >' WA_EIS_TOT-DESC '</td>'
INTO WA_OBJTXT-LINE separated by space.
APPEND WA_OBJTXT TO T_OBJTXT.
CLEAR: WA_OBJTXT.
Regards,
Dharmin ShahHi Dharmin,
Did you try something like
CONCATENATE '<tr height= "3%"> <td height="23" width="84" style="background-color:#CCC8AA;" style="font = 12.0" colspan = 3 >' WA_EIS_TOT-DESC '</td>'
Regards,
Soundarya. -
How to Increase textarea size in HTML code in WM05
Hi All,
I am working on a project where we used JSP & HTML language for User Interfaces.
My application running on WM2005. In one of the page is having text area with cols=30 and rows=15.
Here I increased the number of cols to 50, and checked in PDA(WM2005). There was no change in width of the textarea. It was similar with as it was with cols=30.
But I can see this effect in my LAPTOP.
Can any body please tell me how to increase the textarea in Pocket PC.
Regards,
Babu.Hi Babu,
perhaps you have used a CSS style and this causes your problems? Anyway, the following line works on my PDA without issues:
<textarea cols="20" rows="5" style="width:30px;">test</textarea>
Hope this helps!
Regards,
Oliver -
How to Increase Number of Images from 500 in a LR3 Flash Gallery
I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
2. Because I had roughly 600 images to put in the gallery, I exported the remaining 100 as a separate flash gallery. (Going ahead and exporting 2 galleries will save you headache in a later step)
3. I combined all the images folders (copying "large" images from one folder to the "large" folder in the gallery I want to upload to my site, etc.) so that the files are all in one location.
4. The next step is to increase the gallery maximum in the code. Access (from the exported gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
5. This next step isn't too complicated, but it is specific. You know have to tell that flash file to look for the images you just transferred to the images folder. The best way to do this is to open the group.xml file for the second gallery you exported. Copy all the code beginning with <item> to the bottom of the page. This code tells the gallery to look at your specific images (Note: you'll notice within each item the names of your image file)
6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
7. Save & check your browser!
I hope this was clear...please comment back and I'll clarify if needed.
ro500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it -
How to increase the number of rows in Status Oveview iView in MSS?
Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-MichaelHi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i> -
How to Increase the Length of Condition table in OV20
While creating a condition table in T.code OV20 if fields length is more that 50 bytes table is not getting generated.it gives error as Too Many Fields Selected(More than 50 Bytes).
Actually i need to create a tabel with Basic Material(WRKST) which has length of 48 bytes.
Is there a solution on how to increase the length so that error is avoided.
There is no such error occuring while crating condition table in V/03Hi,
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Regards -
How to increase the length of internal table dynamically
How to increase the length of internal table dynamically depending on the number of fields fetched into the internal table ?
The requirement code :
types: begin of t_data,
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fld1 like zscr_defect_data-defect_val,
fld2 like zscr_defect_data-defect_val,
fld3 like zscr_defect_data-defect_val,
fld4 like zscr_defect_data-defect_val,
fld5 like zscr_defect_data-defect_val,
fld6 like zscr_defect_data-defect_val,
fld7 like zscr_defect_data-defect_val,
fld8 like zscr_defect_data-defect_val,
fld9 like zscr_defect_data-defect_val,
fld10 like zscr_defect_data-defect_val,
fld11 like zscr_defect_data-defect_val,
fld12 like zscr_defect_data-defect_val,
fld13 like zscr_defect_data-defect_val,
fld14 like zscr_defect_data-defect_val,
fld15 like zscr_defect_data-defect_val,
fld16 like zscr_defect_data-defect_val,
fld17 like zscr_defect_data-defect_val,
fld18 like zscr_defect_data-defect_val,
fld19 like zscr_defect_data-defect_val,
fld20 like zscr_defect_data-defect_val,
fld21 like zscr_defect_data-defect_val,
fld22 like zscr_defect_data-defect_val,
fld23 like zscr_defect_data-defect_val,
fld24 like zscr_defect_data-defect_val,
fld25 like zscr_defect_data-defect_val,
fld26 like zscr_defect_data-defect_val,
fld27 like zscr_defect_data-defect_val,
fld28 like zscr_defect_data-defect_val,
fld29 like zscr_defect_data-defect_val,
fld30 like zscr_defect_data-defect_val,
fld31 like zscr_defect_data-defect_val,
fld32 like zscr_defect_data-defect_val,
fld33 like zscr_defect_data-defect_val,
fld34 like zscr_defect_data-defect_val,
fld35 like zscr_defect_data-defect_val,
fld36 like zscr_defect_data-defect_val,
fld37 like zscr_defect_data-defect_val,
fld38 like zscr_defect_data-defect_val,
fld39 like zscr_defect_data-defect_val,
fld40 like zscr_defect_data-defect_val,
fld41 like zscr_defect_data-defect_val,
fld42 like zscr_defect_data-defect_val,
fld43 like zscr_defect_data-defect_val,
fld44 like zscr_defect_data-defect_val,
fld45 like zscr_defect_data-defect_val,
fld46 like zscr_defect_data-defect_val,
fld47 like zscr_defect_data-defect_val,
fld48 like zscr_defect_data-defect_val,
fld49 like zscr_defect_data-defect_val,
fld50 like zscr_defect_data-defect_val,
fld51 like zscr_defect_data-defect_val,
fld52 like zscr_defect_data-defect_val,
fld53 like zscr_defect_data-defect_val,
fld54 like zscr_defect_data-defect_val,
fld55 like zscr_defect_data-defect_val,
fld56 like zscr_defect_data-defect_val,
fld57 like zscr_defect_data-defect_val,
fld58 like zscr_defect_data-defect_val,
fld59 like zscr_defect_data-defect_val,
fld60 like zscr_defect_data-defect_val,
fld61 like zscr_defect_data-defect_val,
fld62 like zscr_defect_data-defect_val,
fld63 like zscr_defect_data-defect_val,
fld64 like zscr_defect_data-defect_val,
fld65 like zscr_defect_data-defect_val,
fld66 like zscr_defect_data-defect_val,
fld67 like zscr_defect_data-defect_val,
fld68 like zscr_defect_data-defect_val,
fld69 like zscr_defect_data-defect_val,
fld70 like zscr_defect_data-defect_val,
fld71 like zscr_defect_data-defect_val,
fld72 like zscr_defect_data-defect_val,
fld73 like zscr_defect_data-defect_val,
fld74 like zscr_defect_data-defect_val,
fld75 like zscr_defect_data-defect_val,
fld76 like zscr_defect_data-defect_val,
fld77 like zscr_defect_data-defect_val,
fld78 like zscr_defect_data-defect_val,
fld79 like zscr_defect_data-defect_val,
fld80 like zscr_defect_data-defect_val,
fld81 like zscr_defect_data-defect_val,
fld82 like zscr_defect_data-defect_val,
fld83 like zscr_defect_data-defect_val,
fld84 like zscr_defect_data-defect_val,
fld85 like zscr_defect_data-defect_val,
fld86 like zscr_defect_data-defect_val,
fld87 like zscr_defect_data-defect_val,
fld88 like zscr_defect_data-defect_val,
fld89 like zscr_defect_data-defect_val,
fld90 like zscr_defect_data-defect_val,
fld91 like zscr_defect_data-defect_val,
fld92 like zscr_defect_data-defect_val,
fld93 like zscr_defect_data-defect_val,
fld94 like zscr_defect_data-defect_val,
fld95 like zscr_defect_data-defect_val,
fld96 like zscr_defect_data-defect_val,
fld97 like zscr_defect_data-defect_val,
fld98 like zscr_defect_data-defect_val,
fld99 like zscr_defect_data-defect_val,
fld100 like zscr_defect_data-defect_val,
fld101 like zscr_defect_data-defect_val,
fld102 like zscr_defect_data-defect_val,
fld103 like zscr_defect_data-defect_val,
fld104 like zscr_defect_data-defect_val,
fld105 like zscr_defect_data-defect_val,
fld106 like zscr_defect_data-defect_val,
fld107 like zscr_defect_data-defect_val,
fld108 like zscr_defect_data-defect_val,
fld109 like zscr_defect_data-defect_val,
fld110 like zscr_defect_data-defect_val,
fld111 like zscr_defect_data-defect_val,
fld112 like zscr_defect_data-defect_val,
fld113 like zscr_defect_data-defect_val,
fld114 like zscr_defect_data-defect_val,
fld115 like zscr_defect_data-defect_val,
fld116 like zscr_defect_data-defect_val,
fld117 like zscr_defect_data-defect_val,
fld118 like zscr_defect_data-defect_val,
fld119 like zscr_defect_data-defect_val,
fld120 like zscr_defect_data-defect_val,
fld121 like zscr_defect_data-defect_val,
fld122 like zscr_defect_data-defect_val,
fld123 like zscr_defect_data-defect_val,
fld124 like zscr_defect_data-defect_val,
fld125 like zscr_defect_data-defect_val,
fld126 like zscr_defect_data-defect_val,
fld127 like zscr_defect_data-defect_val,
fld128 like zscr_defect_data-defect_val,
fld129 like zscr_defect_data-defect_val,
fld130 like zscr_defect_data-defect_val,
fld131 like zscr_defect_data-defect_val,
fld132 like zscr_defect_data-defect_val,
fld133 like zscr_defect_data-defect_val,
fld134 like zscr_defect_data-defect_val,
fld135 like zscr_defect_data-defect_val,
dayst like zscr_data_hdr-dayst,
end of t_data.
In this fld1 to fld135 are defined in internal table.
But if the number of fields are more than 135 then the program is going to short dump.
Some times fld1 to fid170 or more fields will be there in my internal table.
Please suggest me how to make my requirement dynamic and display this data fetched into this internal table onto a .XLS file in the presentation server ?Hi
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Max -
How to increase the size of sort_area_size
How to increase the size of sort_area_size and what size should be according to the PROD database
Thanksuser10869960 wrote:
Hi,
Many Thanks Charles
Oracle does not recommend using the SORT_AREA_SIZE parameter unless the instance is configured with the shared server option. Oracle recommends that you enable automatic sizing of SQL working areas by setting PGA_AGGREGATE_TARGET instead. SORT_AREA_SIZE is retained for backward compatibility."
--How can i know the instance is configured with the shared server option or not?This might be a tough question to answer. A shared server configuration may be enabled, but the clients may still connect using dedicated sessions, in which case PGA_AGGREGATE_TARGET would still apply.
From
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2088.htm
V$SESSION includes a column named SERVER which will contain one of the following for each of the sessions: DEDICATED, SHARED, PSEUDO, or NONE. As a quick check, you could query V$SESSION to see if any sessions are connected using a shared server connection.
From:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm
There are several parameters which are used to configure shared server support, as well as several views to monitor shared server.
As Robert mentioned, when the WORKAREA_SIZE_POLICY is set to AUTO, the SORT_AREA_SIZE setting is not used, unless a shared server configuration is in use.
--What default value is WORKAREA_SIZE_POLICY and SORT_AREA_SIZE ?From:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams157.htm
"Setting PGA_AGGREGATE_TARGET to a nonzero value has the effect of automatically setting the WORKAREA_SIZE_POLICY parameter to AUTO. This means that SQL working areas used by memory-intensive SQL operators (such as sort, group-by, hash-join, bitmap merge, and bitmap create) will be automatically sized. A nonzero value for this parameter is the default since, unless you specify otherwise, Oracle sets it to 20% of the SGA or 10 MB, whichever is greater."
Actually I am facing performence issue since long time till now i did not get the solution even i have raised SRs but i could not.When the issue occur system seems hang.what i monitored whenever hdisk0 and hdisk1 use 100% the issue occur.
Regards,
SajidWhen you say that you have had a performance issue for a long time, is it a performance problem faced by a single SQL statement, a single user, a single application, or everything on the server? If you are able to identify a single user, or SQL statement that is experiencing poor performance, I suggest starting with a 10046 trace at level 8 (wait events) or level 12 (wait events and bind variables) to determine why the execution appears to be slow. If you have not yet determined a specific user or SQL statement that is experiencing performance problems, you might start with either a Statspack Report or an AWR Report (AWR requires a separate license).
If you believe that temp tablespace usage may be a contributing factor to the performance problem, you may want to periodically run this query, which will indicate currently in use temp tablespace usage:
{code}
SELECT /*+ ORDERED */
TU.USERNAME,
S.SID,
S.SERIAL#,
S.SQL_ID,
S.SQL_ADDRESS,
TU.SEGTYPE,
TU.EXTENTS,
TU.BLOCKS,
SQL.SQL_TEXT
FROM
V$TEMPSEG_USAGE TU,
V$SESSION S,
V$SQL SQL
WHERE
TU.SESSION_ADDR=S.SADDR
AND TU.SESSION_NUM=S.SERIAL#
AND S.SQL_ID=SQL.SQL_ID
AND S.SQL_ADDRESS=SQL.ADDRESS;
{code}
The SID and SERIAL# returned by the above could then be used to enable a 10046 trace for a session. The SQL_ID (and CHILD_NUMBER from V$SESSION in recent releases) could be used with DBMS_XPLAN.DISPLAY_CURSOR to return the execution plan for the SQL statement.
You could also take a look in V$SQL_WORKAREA_ACTIVE to determine which, if any, SQL statement are resulting in single-pass, or multi-pass executions, which both access the temp tablespace.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
How to increase the font size of print ouput in SAP 4.7
Hi,
How to increase the font size of the ouput of Write statement on PRINT ? in 4.7
THANKS IN ADVANCE
MOOSAYou can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program -
How to increase the speed of Zoom on TIFF image
Hi everyone,
i m doing zooming operation on tiff image.
when i applied zoom in operation on image which have properties
Bit per sample =1
Image Length = 2200 Pixel
Image Width = 1700 Pixel
Resolution(x) = 200 dpi
Resolution(y) = 200 dpi
then it require 2 sec.
then i apply the same code with tiff image which have properties like,
Bit per sample =1
Image Length = 3300 Pixel
Image Width = 2500 Pixel
Resolution(x) = 300 dpi
Resolution(y) = 300 dpi
then it require 9 to 10 sec.
my code is:
RenderedImage src= oriRndImage[selectedButtonIndex];(orirndImage is Rendered
Iamge)
//Transfer Current RenderedImage object into BufferedImage object
Raster ra= currRimage.getData(); //it take time.
DataBuffer db = ra.getDataBuffer();
SampleModel sa = ra.getSampleModel();
ColorModel cm = currRimage.getColorModel();
final BufferedImage currImage = new
BufferedImage(cm,Raster.createWritableRaster(sa,db,null), false, new
Hashtable());
//Create new Bufferred Image
BufferedImage bi = new BufferedImage(zoomW,zoomH, BufferedImage.TYPE_INT_RGB);
Graphics2D g = bi.createGraphics();
double scaleW = (double)(zoomW)/(double)(prev_width);
double scaleH = (double)(zoomH)/(double)(prev_height);
transAtZoom = AffineTransform.getScaleInstance(scaleW,scaleH);
g.drawRenderedImage(src, transAtZoom);
can any one plz suggest me the way ,how to increase the speed. of Zoom effect?
how to handle this problem?
thnxs..Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison -
How to Increase the # of Recently Opened Files in DW CS6 ???
Can anyone please give a detailed instruction on how to increase the number of Recently Opened files in Dreamweaver CS6? I have read the forums everywhere and do not see a solution here that works. For me there is no: Menus/MM/File_RecentFiles.htm
I mean I have a "Menus" directory but no "MM" directory inside that... also, if I create one... I still need a sample "File_RecentFiles.htm" to copy. Or maybe someone knows another solution?I don't have DWCS6, just DWCS4 and DWCC. When I go to Program Files(x86) > Adobe > Adobe Dreamweaver CC (or Dreamweaver CS4) > configuration > Menus > MM > and then open the file named "File_RecentFiles.htm" at either location, this is the code...
<!-- MENU-LOCATION=NONE -->
<html xmlns:MMString="http://www.macromedia.com/schemes/data/string/">
<HEAD>
<!-- Copyright 2000, 2001, 2002, 2003, 2004, 2005 Macromedia, Inc. All rights reserved. -->
<TITLE><MMString:loadString id="Menus/MM/File_RecentFiles/title" /></TITLE>
<SCRIPT LANGUAGE="javascript" SRC="../../Shared/MM/Scripts/CMN/string.js"></SCRIPT>
<SCRIPT LANGUAGE="javascript" SRC="File_RecentFiles.js"></SCRIPT>
<SCRIPT LANGUAGE="javascript">
<!--
//--------------- LOCALIZEABLE GLOBALS---------------
var MENU_RecentFile = dw.loadString('Menus/MM/File_RecentFiles/MENU_RecentFile');
//--------------- END LOCALIZEABLE ---------------
// -->
</SCRIPT>
</HEAD>
<BODY>
</BODY>
</HTML>
EDIT: It appears you should definitely have this file, unless something is wrong with your installation, or perhaps you are in the wrong directory?
Maybe you are looking for
-
Hi every body ..plz help me on this.. We are facing database termination problem in ECC6 production syste. Database: Oracle 10.2, O/S: Windows 2003. Spam :27, SP level 13. Error is: Errors in file f:\oracle\p02\saptrace\background\p02_ckpt_6520.trc:
-
Migration of Planning Applications from 9.2 to 11.1.12
Hi All, How to see the installed Planning version (applications, and all objects)? Actually We were trying to migrate planning applications from 9.2 ( planning web and 1.5.0.0034 is desktop) to 11.1.1.2 version. I have followed steps as follows 1) Cr
-
Hello All, I have a table in Oracle database which stores the results of the financial report. Let's call it table R. I imported the table R into physical layer of Administration Tool. The data is stored in the following format: multiple departments
-
MYSQL Array Assigned to Swing Control
I am having a hard time figuring out, how I assign data from an array to a swing object such as a "scroll pane". Below is my query and I see how to assign an individual value to a scroll pane, but how would I assign all the values from my query to th
-
ADD Splash Screen to the SAP B1 DE Simple Installer.
can i add a Splash Screen to the SAP B1 DE Simple Installer ? if yes how to do it. when i deploy my addons i want the installer to accept an installation serial & install the addons only if the serial key entered in valid. has someone done this thing