How to increase rate at which data is written to file?

I have a program that reads data at 200kHz and I would like the program to write the data at the same rate. However, the fastest I seem to be able to get my program to write is about 5kHz. I have been using the DAQmx Read and the Format into File functions to read and write the data.
I have tried moving the write function into a separate loop, so that the data would write to a file after the data collection was complete. However, this did not change the rate at which data was written to a file. Any suggestions for increasing the rate at which data is being to a file? Thanks for looking over my problem!
Attachments:
SampleWrite_Read.vi ‏58 KB

Well, writing to a file is always slower since it takes some time to access the hard drive. I noticed in your program that you are writing into an ASCII file. That is also slower than if you write to a binary file. There are several examples that ship with LabVIEW that allow you to do High-Speed Datalogging (I actually believe that is the name of the examples). Those examples actually come in pairs, one does the datalogging, and another helps you read the file. I will recommend taking a look at them.
The previous suggestions by Les Hammer is a great idea. Instead of acquiring 1-sample at a time, try acquiring 100 or 1000 samples and write them to the file.
I hope that helps!
GValdes

Similar Messages

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

How to update link and import data of relocated incx file into inca file?

Subject : <br />how to update link and import data of relocated incx file into inca file.?<br />The incx file was originally part of the inca file and it has been relocated.<br />-------------------<br /><br />Hello All,<br /><br />I am working on InDesignCS2 and InCopyCS2.<br />From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing).<br />Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon.<br />So I tried to recreate and update the links.<br />Below is my code for that<br /><br />//code start*****************************<br />//creating kDataLinkHelperBoss<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br /><br />/**<br />The newFileToBeLinkedPath is the path of the incx file which is relocated.<br />And it was previously part of the inca file.<br />eg. earlier it was c:\\test.incx now it is d:\\test.incx<br />*/<br />IDFile newIDFileToBeLinked(newFileToBeLinkedPath);<br /><br />//create the datelink<br />IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked);<br /><br />NameInfo name;<br />PMString type;<br />uint32 fileType;<br /><br />dlk->GetNameInfo(&name,&type,&fileType);<br /><br />//relink the story <br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br /><br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA);<br /><br />relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); <br /><br />ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); <br /><br />//Update the link now <br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); <br />//code end*********************<br /><br />I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.)<br />I tried using <br />Utils<IInCopyWorkflow>()->ImportStory()<br /> ,But its import the incx file in xml format.<br /><br />What is the solution of this then?<br />Kindly help me as I am terribly stuck since last few days.<br /><br />Thanks and Regards,<br />Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

[Forum FAQ] How do I export each group data to separated Excel files in Reporting Services?

Introduction
There is a scenario that a report grouped by one field for some reasons, then the users want to export each group data to separated Excel files. By default, we can directly export only one file at a time on report server. Is there a way that we can split
the report based on the group, then export each report to Excel file?
Solution
To achieve this requirement, we can add a parameter with the group values to filter the report based on the group, then create a data-driven subscription for the report which get File name and parameter from the group values.
In the report, create a parameter named Name which use the Name field as Available Values (supposing the group grouped on Name field).
Add a filter as below in the corresponding tablix:
Expression: [Name]
Operator: =
Value: [@Name]
Deploy the report. Then create a data-driven subscription with Windows File Share delivery extension for the report in Report Manager.
During the data-driven subscription, in the step 3, specify a query that returns the Name field with the values as the group in the report.
In the step 4 (Specify delivery extension settings for Report Server FileShare), below “File name”option, select “Get the value from the database”, then select Name field.
Below ‘Render Format’ option, select Excel as the static value.
In the step 5, we can configure parameter Name “Get the value from the database”, then select Name field.
Then specify the subscription execute only one time.
References:
Create a Data-Driven Subscription
Windows File Share Delivery in Reporting Services
Applies to
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How can I add an expiration date to a pdf file?

How can I apply an expiration date to a pdf document in Acrobat Pro X? Can this be done in Acrobat XI?

Read this:
http://forums.adobe.com/thread/1085319?tstart=0

How do I save a mutlitcolumn data to a text file?

I am trying to save a multicolumn data to a text file without using Report Generation VIs. Here is the detail scenario...
I have data in the following format.
Time Voltage
1 2
2 3
3 6 ...
and
Power
1
and
Peaks
x-axis y-axis
Peak1 1 4
Peak2 5 11
If I have such data, how would I put them in a columnar format with their title and labels in a text file.
Any example VIs would be nice to see.
Thanks.

Here is one solution, hope it helps. I would like to see this done using clusters and less shift arrays, I'm sure there are a few ways to do this with less wires but i guess that's what sub vi's are for...
Attachments:
data_to_col..vi ‏98 KB

How to store ,retreive and edit data from an xml file

I am new to XML. I am creating a phone book in JSP with backend as an XML file.How can I store retrieve and edit datas from a jsp file.
Please provide me with examples.I dont want to use bean.
Please provide examples

You will have to do some leg-work yourself. You will probably want to use DOM to parse and manipulate your XML data. Xerces (xml.apache.org) is a good open source parser. There are extensive examples on their site.
- Saish

Applications: How does OS X Know Which App to Reference a File to?

I just got my new Macbook and while installing applications, a question I've had for a while came up again.
How does OS X know to reference applications to certain file types?
For example. I have a .avi I downloaded to watch, and downloaded VLC to watch it. I open the .dmg and drag/drop VLC to my Applications folder. Instantly, VLC appears in the "Open With" list for my .avi. How does it know to list it?
My theories are:
1. When dragging/dropping VLC, it's not just copying files, it's also doing some background stuff, including VLC telling OS X that it should be referenced for .avi files
2. When I "Open With" a file, OS X looks at apps in my Applications folder and detects applicable ones in some manner.
3. It's Voodoo magic.
How does it work? I hope my question makes sense.
Thanks!

From what I understand, the second the .dmg is opened and VLC is seen by OS X as an application, Launch Services asks VLC what filetypes to associate it with, and adds that to the database? Then when I try to "open with" a .avi, it sees that .avi is associated with QuickTime, and now VLC too.
that's right. inside the VLC application bundle there is a file called info.plist which contains among other things the info about which files VLC can handle. that file is consulted by the Launch services once it becomes aware of VLC being present in the system and that info is recorded in the launch services database. That's how it works with all applications. you can view this file if you want. control-click on VLC in finder and select "show package contents". in the new finder window that opens up go to Contens folder and quicklook the file info.plist.
Is this correct?
Thanks.

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to increase speed while retrieving data from tableand showing it in pop

Hi,
In one form ,I have used f9 key to retrieve data from table in oracle database . i.e. in any input field in my form, once I press f9 key, it execute JavaScript windows. Open command.
In that command, I called the servlet which retrieves nearly 7000 rows data from table and then it dispatch request to another jsp page which shows the related data in tabular form. The data may contain nearly 7000-8000 rows.
So when I press the f9 keys it takes around 10-12 second to open the page.
Is there any ways to open this pop up windows within 2-3 second once I hit the f9 keys.
Here with I am attaching hole code for servlet and jsp page.
Any suggestion is highly appreciated.
Thanks and Regards
Harshal
try { Class.forName("oracle.jdbc.OracleDriver"); connection = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:bmltest","system","manager"); st = connection.createStatement(); String query = ""; if(find == null){ query = "SELECT A1.ITEMNAME,A1.TECHDESC, A1.ITEMCODE,SUBSTR(A1.MUNITCODE,1,3),A1.MUNITCODE FROM CMSTITEM A1,CMSTITEMGRP A2 WHERE A1.ITEMGROUPCODE=A2.ITEMGROUPCODE AND A2.ITEMCLASS='"+Iclasscode+"' ORDER BY A1.ITEMNAME ASC"; }else{ find = find.toUpperCase(); query = "SELECT A1.ITEMNAME,A1.TECHDESC, A1.ITEMCODE,SUBSTR(A1.MUNITCODE,1,3),A1.MUNITCODE FROM CMSTITEM A1,CMSTITEMGRP A2 WHERE A1.ITEMGROUPCODE=A2.ITEMGROUPCODE AND A2.ITEMCLASS='"+Iclasscode+"' ORDER BY A1.ITEMNAME ASC and A1.ITEMNAME like '%"+find+"%' OR A1.ITEMCODE like '%"+find+"%'"; } rs = st.executeQuery(query); while (rs.next()){ for (int i=1;i<=5;i++){ Itemnamedetail.add(rs.getString(i)); } } connection.close(); }catch(Exception e){ e.printStackTrace(); } request.setAttribute("rowid",rowid); request.setAttribute("select",Itemnamedetail); RequestDispatcher view = request.getRequestDispatcher("Itemname.jsp"); view.forward(request,response);
and here is an jsp code
<%@page import ="java.util.*,java.sql.*,java.text.*"%><% ArrayList<String> arr1 = (ArrayList<String>)request.getAttribute("select"); String rowid = (String)request.getAttribute("rowid"); String itmcd = "itmcd"+rowid; String itmnm = "itmnm"+rowid; String uom = "uom"+rowid; String mcode = "mcode"+rowid;%> <html><head> </head><body> <form name = "unitsel" action = "SelectUnit" method = post><p align="center"><b>Find : <input type = "text" id = "find" name = "find" ></p></form><table border = 2px align = "center" width = 75%> <tr> <th>Item Name</th> <th>Tech-Description</th> <th>Item-code</th> <th>Unit-name</th> <th>Munit-code</th> </tr> <td width = 65%><h5 align=center><%=b%></h5></td> <td width = 35%><h5 align=center><%=c%></h5></td> <td width = 35%><h5 align=center><%=d%></h5></td> <td width = 65%><h5 align=center><%=e%></h5></td> </tr> <%j++;}%> </table> </body></html>

First of all you will have to apply paging to show data in tables. and retrieve only those sets of data which are required. You will defnitely need to do lot of code for that. but i am hopeful, you will get some thing on net.
Second thing you can do is use AJAX. It will show your popup and will keep on loading data simultaneously. You can use JQuery and many others for that.

How to import external table, which exist in export dump file.

My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
Naveen

Hi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen

How to extract the size and date from a given file

Hi,
I want to extract the size and date of a file (it can be either a video, audio or text file) that the user points to the location of. But I am not sure how. Does Java have an api that can do this? If not is there some other way of doing this? Can anyone help? Thanks in advance.

Have a look at java.io.File, specifically
public long lastModified()
This format returned (I find) is nasty, so then use java.util.Date (or java.sql.Date, look the same on the surface to me) to format it.
Cheers,
Radish21

How do I find the creation date of a pdf file when the user did not enter one (doesn't show up in properties)?

I can't find the stamp in properties, etc.. does not show up. I do not know how to otherwise get the date. This is Version 1.4 (Acrobat 5.x) DPE build 5095

The data is not there at all. My mention of hidden metadata (perhaps confusing) is to emphasise that there IS NO hidden metadata, because that would be a Bad Thing.

How to convert indesign document's data into the xml file

Hi all,
First let me explain what exactly i am trying to do.
just i want to ge all page items data (type,frame etc ) from a document and i want to convert all those data into my xml structure .
now i am able to get page item's data from a document . i dont know how to approach it further
any advise ? how do i approach it?.
Experts Please help!

What are you trying to achieve specifically. Did you look into IDML to see if suits your needs?
Manan Joshi
- Efficient InDesign Solutions -
MetaDesign Solutions
http://metadesignsolutions.com/services/indesign-development.php

How to increase rate at which data is written to file?

Similar Messages

Maybe you are looking for