How to increase RMI-timeout

Hi there,
I have an session ejb method, running quite a while. Calling this method, results in
0rg.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed: No
Can this timeout be increased? How to?
regards
Heiner

Hey Andy,
Thanks, I have the same problem with our "reborn" client app that now uses RMI/IIOP (fully refactored for JAAS by the way, thanks for the help previously).
I can't find this setting on the IIOP tab in the console, so I tried to set it through <-Dweblogic.iiop.IdleConnectionTimeout=6000>, but the dreaded CORBA.COMM_FAILURE still occurs on long running operations, about 4 minutes in. The server continues to completion, but the client has already given up.
Any ideas?
Best regards,
Peter
PS - server is WLS 8.1sp3.
Message was edited by premster at Sep 1, 2004 1:31 AM

Similar Messages

How to increase storage migration job timeout in SCVMM 2012 R2

Hi,
I needed to move a VM 2+TB in size on slow storage to another volume. The VM was turned off. The VMM job failed after 9 hours and 23 seconds with following error:
Error (2924)
Unable to complete the request. Operation on the hyperv1.company.local server timed out.
Recommended Action
Try the operation again.
VHD files were copied to destination successfully, but were not removed from source and also the VM was not imported from the destination location.
So it looks like there is 9 hour default timeout for storage migration jobs in VMM.
How to increase this timeout?
Thanks,
Egils

Brian,
If you got the same timeout error sooner then my assumption that this is 9 hour file copy timeout was wrong.
In my case the files were copied successfully, the VM was was removed from Failover Cluster and Hyper-V (unregistered in source location), but was not registered in destination location, so it might be that timeout occurred during registration of the VM in
destination location.
Unfortunately the SCVMM error message does not include any details about the timeout.
Btw, there are some SCVMM timeouts that can be changed, like
http://support.microsoft.com/kb/2790310
http://blogs.technet.com/b/vishwa/archive/2011/02/01/tuning-scvmm-for-vdi-deployments.aspx
and WinRM timeouts
http://blogs.technet.com/b/jonjor/archive/2010/04/21/intermittent-connectivity-issues-and-cluster-refresh-times-with-windows-2008-r2-and-scvmm-2008-r2.aspx
Egils

11.1.1.5 - How can we increase the timeout of BPM Workspace ?

Hi ,
I am facing an issue where the BPM Workspace times out after every 5 mins or so.
I read in another post that we need to edit some workspace.properties file - where can I find it.
I tried using http://technology.amis.nl/blog/13768/increase-the-timeout-of-oracle-bpm-worklist-app/comment-page-1#comment-481839 but ran into some issues (should be there as my comment) where the timeout became too high.
Appreciate your help.
Thanks

I got this resolved. Added a different variable for the weblogic.xml timeout and teh web.xml timeout (Btw the digits after the timeout props are not needed if you donot need too many variables).
Also My config root was pointing to the wrong war. I changed it to point to a correct .war (relative location can be used too) & it worked just fine after that !
Thanks

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

How to increase max thread for SOAP adapter ?

Hi PI Expert,
I have problem with Synchronous SOAP transaction in PI 7.0 EHP1 SPS2. The interface actually using ccBPM.
IDOC ---> ccBPM -
> synchronous call to SOAP adapter.
The problem is there are always timeout call from Integration server to SOAP adapter after several transaction success.
it seems like the soap adapter is doesn't has enough thread to receive call from IS.
the pattern is like success, success, failed, success, success, failed. it always 1 errror within 1 minutes for 4-5 transaction in the same minutes.
is that any log in adapter that i can check or how to increase soap adapter thread ?
Please advise ?
Best Regards
Fernand

Hi Fernand,
please check this blog:
Adapter Specific Queues in PI
/people/sunil.singh13/blog/2009/03/30/adapter-specific-queues-in-pi
Regards,
Gábor

How to Increase the retreving size of instances using PAPI filters.

Hi,
How to Increase the retreving size of instances using PAPI filters.
In my engine database instance size exceeds 2500 then we are getting following exception.
If we login in to user workspace able to see the instances but while trying to retrieve from PAPI getting below exception and showing the user's inbox aize as 0.
In Process Admin console we set all the required parameters.
Still I m getting the same problem.
Can you please lgive mev the solution.
<Mar 23, 2010 8:58:24 PM SGT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.getInstancesByFilter(Lfuego.papi.impl.j2ee.EJBSecureEngineInfo;Ljava.lang.String;Lfuego.papi.Filter;)
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl.
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl
     at java.io.ObjectStreamClass$FieldReflector.setObjFieldValues(ObjectStreamClass.java:2032)
     at java.io.ObjectStreamClass.setObjFieldValues(ObjectStreamClass.java:1212)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1953)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
Regards,
Bharath.
Edited by: bg57295 on Mar 24, 2010 6:45 PM

Hi Bharath,
Believe me, you have an incompatibility between different build#.
PAPI has an instance cache. When certain process has more instances than the maximum specified, the cache is switch to status OPEN. That means, that PAPI will not be able to resolve some instance queries using the information in the cache. When that occurs, PAPI forward all those queries to the engine.
The incompatibility introduced is in the communication between PAPI and Engine. So, you only get the exception when you have more instances than the maximum cache size.
Regards,
Ariel

JDBC Receiver - how to increase Read Time

Hi Experts,
Please tell me how to increase the read time and response time in the JDBC receiver adapter.
Thanks,
Kalyani.

hi,
Check 2.3.5 section of this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
According to document:
In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
Refer note 1078420 for more details
Thanks.

How to increase the requestTimeout ?

I use crystal report Java API (com.crystaldecisions.sdk.*) to generate a report. When the request exceed exactly 10 minutes, i have the following exception (in french).
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: La demande a expiré suite à labsence de réponse du serveur pendant millisecondes.---- Error code:-2147217385 Error code name:requestTimeout ;
How can i increase this timeout ?
I have the same problem with Crystal XI R2 and Crystal 2008.
Best regards

Thank for your reponse. your are my Buoy.
// get the report
          ReportClientDocument oReportClientDocument = new ReportClientDocument();
          IInfoStore oInfoStore = (IInfoStore)oEnterpriseSession.getService("InfoStore");
          IInfoObjects oInfoObjects = oInfoStore.query("Select * from CI_INFOOBJECTS where SI_PROGID = 'CrystalEnterprise.Report' and SI_INSTANCE = 0 and SI_NAME = '" + idMaquette + "'");
          IReportAppFactory oReportAppFactory = (IReportAppFactory)oEnterpriseSession.getService("", "RASReportService");
          IInfoObject oIInfoObject = (IInfoObject)oInfoObjects.get(0);
          oReportClientDocument = oReportAppFactory.openDocument(oIInfoObject, 0, java.util.Locale.FRANCE);
          oReportClientDocument.getDatabaseController().logon(dbUser, dbPassword);
// execute the report
          PrintOutputController lePrintOutputController = reportClientDocument.getPrintOutputController();
          ReportExportFormat aReportExportFormat = getReportExportFormat(ReportExportFormat.from_string("PDF"));
->          ByteArrayInputStream byteIS = (ByteArrayInputStream)lePrintOutputController.export (aReportExportFormat);
          writeFile(aAbsoluteFileName,byteIS);
The exception (requestTimeout) is produice when the export is execute.
Do you know if tomcat is used when i export my report ? This deadline(Timeout) is a parameter of tomcat ?

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

RMI Timeout

For a while I've tried to find solution to this. So, I have a web application that uses RMI to access business module, that si, session ejb. It's using typical
Context ctx;
ctx=getInitialContext();
Facade ejb=(Facade)ctx.lookup("Facade");
etc.
where getInitialContext looks up a remote server.
private static Context getInitialContextStandalone() throws NamingException {
Hashtable env = new Hashtable();
// Standalone OC4J connection details
env.put( Context.INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory" );
env.put( Context.SECURITY_PRINCIPAL, "oc4jadmin" );
env.put( Context.SECURITY_CREDENTIALS, "adminadmin" );
env.put(Context.PROVIDER_URL, "ormi://localhost:23791/ejb1");
return new InitialContext( env );
And of course, I have a situation: what happends if connection breaks so I cant connect to a server? Of course, I handle naming exceptions, but I didn't find any way to limit timeout. Timeout occurs after about 40 seconds in here.
So, is there any way to set value for this timeout? Can it be done from the program or is there some server or java parameter that can be used?

Hi,
Did you ever manage to get a resolution to this?
I'm hitting a similar issue when I'm invoking a BPEL using the IDevlieryService interface, and I could really do with increasing the timeout value.
Cheers,
Martin

How to increase dynamically open_cursors and session_cached_cursors

how to increase dynamically open_cursors and session_cached_cursors
for Ex. alter system open_cursors = 500

instane level:
alter system set session_cached_cursors=200 scope = spfile; or set init.ora file.
alter system set open_cursors=400;
More details about open_cursor and session_cached_cursor, refer the below link
http://www.orafaq.com/node/758
Regards
RajaBaskar

How to Increase Number of Images from 500 in a LR3 Flash Gallery

I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
2. Because I had roughly 600 images to put in the gallery, I exported the remaining 100 as a separate flash gallery. (Going ahead and exporting 2 galleries will save you headache in a later step)
3. I combined all the images folders (copying "large" images from one folder to the "large" folder in the gallery I want to upload to my site, etc.) so that the files are all in one location.
4. The next step is to increase the gallery maximum in the code. Access (from the exported gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
5. This next step isn't too complicated, but it is specific. You know have to tell that flash file to look for the images you just transferred to the images folder. The best way to do this is to open the group.xml file for the second gallery you exported. Copy all the code beginning with <item> to the bottom of the page. This code tells the gallery to look at your specific images (Note: you'll notice within each item the names of your image file)
6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
7. Save & check your browser!
I hope this was clear...please comment back and I'll clarify if needed.
ro

500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

How to increase recent call list in i phone 5s

how to increase recent call list in i phone 5s

There are apps that can jeep Track of many more calls. The iPhone native app is limited to 100. Search for those apps in the App Store.

How to increase the number of rows in Status Oveview iView in MSS?

Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-Michael

Hi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i>

How to increase RMI-timeout

Similar Messages

Maybe you are looking for