How to increase max thread for SOAP adapter ?

Hi PI Expert,
I have problem with Synchronous SOAP transaction in PI 7.0 EHP1 SPS2. The interface actually using ccBPM.
IDOC ---> ccBPM -
> synchronous call to SOAP adapter.
The problem is there are always timeout call from Integration server to SOAP adapter after several transaction success.
it seems like the soap adapter is doesn't has enough thread to receive call from IS.
the pattern is like success, success, failed, success, success, failed. it always 1 errror within 1 minutes for 4-5 transaction in the same minutes.
is that any log in adapter that i can check or how to increase soap adapter thread ?
Please advise ?
Best Regards
Fernand

Hi Fernand,
please check this blog:
Adapter Specific Queues in PI
/people/sunil.singh13/blog/2009/03/30/adapter-specific-queues-in-pi
Regards,
Gábor

Similar Messages

How to write won WSDL file for SOAP adapter ?

Hi experts
Can any one expalin me how to write WSDL file for SOAP adapter ?
What and all things i need to know ? i have no idea on this....
I got the business but to WSDL ...i am very new to this
Adv...thanks
Rakesh

HI,
Please see the below links,
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0d7349b6-0901-0010-ddbe-ec43178a61ff
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
/people/kevin.liu/blog/2006/04/12/wsdl-11-binding-extension-for-soap-12
Regards
Chilla..

How to increase the thread count for JDBC adapter

Hi ALL,
Could someone advice me on how to increase the thread count for JDBC Adapter in Visual Admin:
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 5
I need to increase them to 10.
Regards,
Xier

hi check the below links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a
admin manual:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fdb09490-0201-0010-e09e-a76388646ad0
note:reward points if solution found helpfull.....
regards
chandrakanth.k

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

Adapter specific message attributes for SOAP adapter

Hi all,
I have gone through the SAP Help Documents for configuring SOAP Communication Channel. I am unable to understand how to implement ASMA for Soap adapter.
Please provide some links to help me understand the same
Many Thanks,
Neha

Hi Neha,
pls do chk the below links for SOAP adapter message attributes
http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst38.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/webservices/webservices16.htm
Regards
Sampath

How to Send Multiple Attachment by SOAP Adapter

Hi,
How to send multiple attachment by SOAP Adapter.
I am able to send single attachment but at the time of sending multiple attachment i am not able to see in SXMB_moni.
Regards,
Anurag

On the communication channel, please check the 'Do Not Use SOAP envelope' option. Also, please, add the "nosoap" attribute to the SOAP adapter caller. Check the note below for more information
#856597 FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
> "How does the nosoap mode work for the SOAP sender adapter?"

Enabling https for SOAP adapter

Hello all,
Can anyone suggest how to enable https for SOAP adapter in PI system?
Thank You,
Regards,
Hasan

Hi Hasan,
CHeck the blog :/people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter which guides you clearly
Also check SAP Note#891877 for reference.
Thanks and Regards,
Naveen

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

In mdx how to get max date for all employees is it posible shall we use group by in mdx

in mdx how to get max date for all employees is it posible shall we use group by in mdx
example
empno ename date
1 hari 12-01-1982
1 hari 13-06-2000
by using above data i want to get max data

Hi Hari3109,
According to your description, you want to get the max date for the employees, right?
In your scenario, do you want to get the max date for all the employees or for each employee? In MDX, we have the Max function to achieve your requirement. You can refer to Naveen's link or the link below to see the details.
http://www.sqldbpros.com/2013/08/get-the-max-date-from-a-cube-using-mdx/
If this is not what you want, please provide us more information about the structure of you cube, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

How to Increase Instance size for ALBPM-Err:'Max instance size exceeded.

HI,
Can anybody in How to increase maximum instance size for
1. ALBPM Studio
2. runtime i.e. process administrator?
Look forward for help.
Cheers
The exception in detail is:
Error while persisting the transaction data: 'Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0''
Details:
Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0'
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0' at fuego.server.ProcInst.getComponentData(ProcInst.java:792) at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2777) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.executeUpdateInstance(JdbcProcessInstancePersMgr.java:2870) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.updateInstance(JdbcProcessInstancePersMgr.java:2272) at fuego.server.persistence.Persistence.updateProcessInstance(Persistence.java:1008) at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1819) at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109) at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132) at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685) at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368) at fuego.transaction.TransactionAction.commit(TransactionAction.java:302) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:63) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:264) at fuego.server.execution.ToDoItem.run(ToDoItem.java:559) at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:773) at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134) at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:446) at fuego.component.ExecutionThread.work(ExecutionThread.java:837) at fuego.component.ExecutionThread.run(ExecutionThread.java:408)

First take a look at your instance variables in your processes. Determine if some could be changed to be Separated instance variables. Once an instance variable's category changes from "Normal" to "Separated", it is not included in the instance size calculation.
If you cannot mark variables as Separated, then in Studio's "Project Navigator" tab, right mouse click the name of your project -> click "Engine Preferences" -> with the "Engine" selected as the Category, click the "Advanced" tab on the upper right change the "Maximum Instance Size" to 64KB (4x the original 15kb value) and change the "Instances Cache" to 1250 (1/4th the original value).
What version of Enterprise are you on (Standalone or WLS)? There is a similar setting on Enterprise, but it is slightly different between the two types of Enterprise Engines.
Dan

PI 7.0: Message prioritisation in adapter engine for SOAP adapter.

Hi All,
We have both high and low priority synchronous messages using the SOAP sender Channel of the Central AE.
How can we make sure that High Prio messages ALWAYS get a thread right away when entering the AE? Installing a separate AE is not an option.
When I look in RWB->Component Monitoring->Adapter Engine->Engine Status in the Queues tab, I see this:
SOAP_http://sap.com/xi/XI/SystemCall Yes 5(5) 5
SOAP_http://sap.com/xi/XI/SystemRqst Yes 5(5) 5
When a new High Prio message enters, it can take more than one hour before it gets processed, because there are 1000 Low Prio messages also using the same 5 available Threads...
This delay is of course unacceptable for High Prio messages.
I checked in many other threads in SDN, looks like we cannot priortise for particular messages in PI 7.0, as we can do only at adapter level, not at interface level.
I was thinking of going to the approach which was suggested by "Gr, Wout" in the below thread.
xi prioritization in adapter engine (ae, af, adapter framework, java, jca)
Creating own adapter "MYSOAP" by copying the metadata of SOAP adapter. By that we can use our own adapter "MYSOAP" for high priority interfaces.
what you think guys about this approach?
Is there any thing I need to take care going through this approach apart from copying SOAP metadata into my own adapter.?
Thanks
Deepthi

increased thread count for soap adapter

Setting interface name dynamically from client for SOAP Adapter...

Hi,
does anyone have experience in setting the sender interface name in the HTTP-SOAP request dynamically? I have followed the instructions in "How To Use the XI 3.0 SOAP Adapter" on page 17 (see also SAP Note 856597) which say:
"If you select Use Encoded Headers and Use Query String,
[...]The sender SOAP adapter creates the XI message header according to the
information provided in the query string. [...] In the sender SOAP adapter, you can use only some of the parameters, but the first
parameter must always be the version. For example, you send from the Web service client to the following URL: http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>&version=3.0&Interface=http%3A
%2F%2Fsap.com%2Ftest%5ETest
This will overwrite the default interface and namespace of the sender channel."
This is exactly what I need! However, what I actually get as a response following this description is a SOAP:Fault with a java.lang.StringIndexOutOfBoundsException: String index out of range: -1.
Has anyone got this to work properly?
Thanks in advance.

Thank you for your input. I am using the following format for the call (with "x" standing for one letter each):
http://xix.xxx.xx.xxx:5xx00/XISOAPAdapter/MessageServlet?channel=:xx_xxx_xxx_xxxx:xx_xxx_x_SOAP_S&version=3.0&Interface=http%3A%2F%2Fxxxxxxxx.xx%2Fxxxxxx%2Fxxxxxxxxxxxxxxxxxxxxxxxx%5Exxxxxxxxxxxxxxxxxxxxxx
Anything wrong with that? With unchecked "Use Encoded Headers" and "Use Query String" it works fine (default interface) but as soon as I set these flags I get the SOAP-Fault response.
We are on XI 3.0 SPS18.

For SOAP Adapter

HI Friends,
i getting gold value from file i need to update the value in webservice for every second in website.So
how to update the value dynamicallly in websystem using soap adapter receiver is file adapter is there any options in soap adapter

You can do file --> PI --> SOAP (Receiver) asynchronous to achieve this.
Elaborate more about dynamically every second...

HTTPS configuration for SOAP adapter

Hi,
We have a requirement where we need to send the request to the target URL with https protocol.
We have raised a request to configure the XI server for HTTPS.
HTTPS has been configured on both ABAP stack and J2EE stack.
But we could not find the HTTPS option in the drop down list of transport protocol in receiver Soap adapter.
For this do we need to do any setting changes on the XI server after the configuration?
Thanks,
Jyothsna .

Hi,
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Please go through below link for referance (above information is from below link)
Step by step guide for SSL security
step by step guide to implement SSL
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Regarding message level you can encrypt the message using certificates.
For both of this basis team has to deploy the releavant certificates in XI ABAP Stack or Java stack.
Generally if the scenarios are intra company we dont use any transport level or message level security since the network is already secured.
Check the following links.. you will get the information all about the securities...
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/content.htm
Also read thru this link for message level security - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Also find soeminformation in these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Thanks
Swarup

How to increase max thread for SOAP adapter ?

Similar Messages

Maybe you are looking for