How to index a column in an interval partitioned table

Hi -
I see that domain indexes are not allowed on a table which has interval partitioning on it.
Given this limitation, is there any way to improve performance on wildcard searches (like '%condition%';) on a VARCHAR(2) column in a table which has interval partitioning?
Or are we SOL if we want to do this?
Thanks for any advice or experience in this area.
LJ

There's no real good way to make non-domain-indexed text queries fast. If there was, the Text forum wouldn't be the lively place it is today!
But SOL? No, I wouldn't call you SOL... There are always ways to do stuff, just depends on how important it is to you, how much space/time/maintenance you're willing to do to make things work.
For example, create a non-interval-partitioned materialized view of your target table/column and use a domain index on that.
What constraints or options do you have (or think you have) in order to make this work?

Similar Messages

How to Organize the columns in the dynamic internal table?

Hello Folks!
How to Organize the columns in the dynamic internal table? i tried passing the parameter COL_POS to the fieldcatalog, Which is not working.

Organize in What order ? What is your way to output ?
If you use ALV, you need to create fresh FIELD CATALOG for your dynamic table and then assign the column position.
Regards,
Diwakar

Alter range partition table to Interval partitioning table.

Hi DBA's,
I have a very big range partitioned table.
Recently we have upgraded our database to 11gR2 which has a feautre called interval partitioning.
Now i want to modify that existing range partitioned table to Interval Partitioning.
can we alter the range partitioned table to interval partitioning table?
I googled for the syntax but i didn't find it, can any one help[ me out on this?
Thanks.

If you ignore the "alter session set NLS_CALENDAR=PERSIAN;" during create/alter, everything else seems to work.
When you set the "alter session..." during inserts, the rows gets inserted into the correct partitions.
Only thing is when you look at HIGH_VALUE, you need to convert from the default GREGORIAN to PERSIAN.

HOW to enable oracle advance compression for EXIST partitioned table

Hi All,
I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
ORacle version: 11.2.0.2.0
Please provide me any relevant doc or any exp.
Thanks in advance.

could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
From the resource above:
How do I compress an existing table?
There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
"

Trying to convert Interval Partitioned Table to Range..Exchange Partition..

Requirement:
Replace Interval partitioned Table by Range Partitioned Table
DROP TABLE A;
CREATE TABLE A
   a              NUMBER,
   CreationDate   DATE
PARTITION BY RANGE (CreationDate)
   INTERVAL ( NUMTODSINTERVAL (30, 'DAY') )
   (PARTITION P_FIRST
       VALUES LESS THAN (TIMESTAMP ' 2001-01-01 00:00:00'));
INSERT INTO A
     VALUES (1, SYSDATE);
INSERT INTO A
     VALUES (1, SYSDATE - 30);
INSERT INTO A
     VALUES (1, SYSDATE - 60);I need to change this Interval Partitioned Table to a Range Partitioned Table. Can I do it using EXCHANGE PARTITION. As if I use the conventional way of creating another Range Partitioned table and then :
DROP TABLE A_Range
CREATE TABLE A_Range
a NUMBER,
CreationDate DATE
PARTITION BY RANGE (CreationDate)
   (partition MAX values less than (MAXVALUE));
Insert /*+ append */ into A_Range Select * from A; --This Step takes very very long..Trying to cut it short using Exchange Partition.Problems:
I can't do
ALTER TABLE A_Range
EXCHANGE PARTITION MAX
WITH TABLE A
WITHOUT VALIDATION;
ORA-14095: ALTER TABLE EXCHANGE requires a non-partitioned, non-clustered table
This is because both the tables are partitioned. So it does not allow me.
If I do instead :
create a non partitioned table for exchanging the data through partition.
Create Table A_Temp as Select * from A;
   ALTER TABLE A_Range
EXCHANGE PARTITION MAX
WITH TABLE A_TEMP
WITHOUT VALIDATION;
select count(*) from A_Range partition(MAX);
-Problem is that all the data goes into MAX Partition.
Even after creating a lot of partitions by Splitting Partitions, still the data is in MAX Partition only.
So:
-- Is it that we can't Replace an Interval Partitioned Table by Range Partitioned Table using EXCHANGE PARTITION. i.e. We will have to do Insert into..
-- We can do it but I am missing something over here.
-- If all the data is in MAX Partition because of "WITHOUT VALIDATION" , can we make it be redistributed in the right kind of range partitions.

You will need to pre-create the partitions in a_range, then exchange them one by one from a to a tmp then then to arange. Using your sample (thanks for proviing the code by the way).
SQL> CREATE TABLE A
2 (
3     a              NUMBER,
4     CreationDate   DATE
5 )
6 PARTITION BY RANGE (CreationDate)
7     INTERVAL ( NUMTODSINTERVAL (30, 'DAY') )
8     (PARTITION P_FIRST
9         VALUES LESS THAN (TIMESTAMP ' 2001-01-01 00:00:00'));
Table created.
SQL> INSERT INTO A VALUES (1, SYSDATE);
1 row created.
SQL> INSERT INTO A VALUES (1, SYSDATE - 30);
1 row created.
SQL> INSERT INTO A VALUES (1, SYSDATE - 60);
1 row created.
SQL> commit;
Commit complete.You can find the existing partitions form a using:
SQL> select table_name, partition_name, high_value
2 from user_tab_partitions
3 where table_name = 'A';
TABLE_NAME PARTITION_NAME HIGH_VALUE
A          P_FIRST        TO_DATE(' 2001-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIA
A          SYS_P44        TO_DATE(' 2013-01-28 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIA
A          SYS_P45        TO_DATE(' 2012-12-29 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIA
A          SYS_P46        TO_DATE(' 2012-11-29 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAYou can then create table a_range with the apporopriate partitions. Note that you may need to create additional partitions in a_range because interval partitioning does not create partitions that it has no data for, even if that leaves "holes" in the partitioning scheme. So, based on the above:
SQL> CREATE TABLE A_Range (
2     a NUMBER,
3     CreationDate DATE)
4 PARTITION BY RANGE (CreationDate)
5     (partition Nov_2012 values less than (to_date('30-nov-2012', 'dd-mon-yyyy')),
6      partition Dec_2012 values less than (to_date('31-dec-2012', 'dd-mon-yyyy')),
7      partition Jan_2013 values less than (to_date('31-jan-2013', 'dd-mon-yyyy')),
8      partition MAX values less than (MAXVALUE));
Table created.Now, create a plain table to use in the exchanges:
SQL> CREATE TABLE A_tmp (
2     a              NUMBER,
3     CreationDate   DATE);
Table created.and exchange all of the partitions:
SQL> ALTER TABLE A
2    EXCHANGE PARTITION sys_p44
3    WITH TABLE A_tmp;
Table altered.
SQL> ALTER TABLE A_Range
2    EXCHANGE PARTITION jan_2013
3    WITH TABLE A_tmp;
Table altered.
SQL> ALTER TABLE A
2    EXCHANGE PARTITION sys_p45
3    WITH TABLE A_tmp;
Table altered.
SQL> ALTER TABLE A_Range
2    EXCHANGE PARTITION dec_2012
3    WITH TABLE A_tmp;
Table altered.
SQL> ALTER TABLE A
2    EXCHANGE PARTITION sys_p46
3    WITH TABLE A_tmp;
Table altered.
SQL> ALTER TABLE A_Range
2    EXCHANGE PARTITION nov_2012
3    WITH TABLE A_tmp;
Table altered.
SQL> select * from a;
no rows selected
SQL> select * from a_range;
         A CREATIOND
         1 23-NOV-12
         1 23-DEC-12
         1 22-JAN-13John

How to add particluar column dynamically to an internal table

Hi
How can I add particluar column(s) to an internal table dynamically and then display in an alv.
for eg:
There are 5 columns and the 4th column is the period (1 to 12) that has been declared as select-options in the selection screen.
col1 = bukrs
col2 = lifnr
col3 = akont
col4 = period
col5 = waers
so my question is
if period is in the range from 1 to 3 then the internal table should be
bukrs lifnr akont period1 period2 period 3 waers.
likewise if the period is in the range from 1 to n then internal table should be
Bukrs lifnr akont period1 period2 period3 period4 ..... periodn waers.
Thanks

Hi,
First create a global field catalog with all 12 periods ie period1, period2, ....period12.
Once you have fieldcatalog with all 12 periods
Then use this code arrive the dynamic field in the fieldcatalog
data : begin of i_period occurs 0.
data : period type i.
data : end of i_period.
data : v_no type i value 1.
do.
i_period-period = v_no.
v_no = v_no +1.
if v_no eq 12.
 exit.
endif.
enddo.
" Here arrive the periods that are not belong to selection option period
delete i_period where period in s_period.
data : v_fldname like dd03l-fieldname.
loop at i_period.
concatenate 'PERIOD' i_period-period into v_fldname.
condense v_fldname no-gaps.
read table i_fieldcat with key fieldname = v_fldname.
if sy-subrc eq 0.
 delete i_fieldcat index sy-tabix.
endif.
endloop.
After this loop your field catalog contains only valid period that equal to selection option period
aRs

How to add a column at the end of table in already designed document..?

Hi,
I am writing a javascript for adding a column at the end of table in Indesign document. using our plug-in we have created the Indesign document.
Each table i want to add one extra column at the end. Is it possible..? please help me if anyone has idea regarding this.
Thanks,
Vimala L

Hi Vimala,
Please try the below JS code, This code will add the new column in every table last column after.
var myTable = app.activeDocument.stories.everyItem().tables.everyItem().getElements();
for(i=0; i<myTable.length; i++){
myTable[i].columns.add(LocationOptions.after, myTable[i].columns[-1]);
thx,
csm_phil

How mapping sharepoint list Columns to Sql server data table columns programaticlly

Hi ,
I have one Verification List in share Point ,in that list i have 10 columns.And we have sql server in that sql server we have one data table Verification_Table
in that table we have 25 column, my requirement is all list data move to sql data table[ what ever columns mapping to list--->data table that data store in data table reaming column is Null]
using grammatically not in BCS

Hello,
You can create SQL connection and use Datareader to read from SQL.Firs create a connection string and put this string in web application web.config file of your sharepoint site.
Now use below code to call your connectionstring in your webpart.
SqlConnection con = new SqlConnection(System.Configuration.ConfigurationManager.AppSettings["ConnectionString"]);
Here is link to read the data from SQL:
http://www.akadia.com/services/dotnet_data_reader.html
Here is one MSDN link to read SP list data:
http://msdn.microsoft.com/en-us/library/dd490727%28v=office.12%29.aspx
Let me know if you have any doubt
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

GG replication for interval partitioned tables while issuing drop partition command

Hi all, we have golden gate replication between two databses 1 and 2. table A in 1 and 2 is interval partitioned but the partition names are different. whats the best way to achieve GG replication using drop partition. We want to drop partition automatically in DB 2 if done in DB 1.

Hi,
In this scenario ypu would better to drop manually on both the database, especially for drop you could filter based on operation type and do it manually.

How to check which column data differs from master table and archive table

Hi All,
i have two tables, table a (a1 number,a2 varchar2,a3 varchar2) and table b (b1 number,b2 varchar2,b3 varchar2).
how to check the data in both the table are same( including all columns).
data in a.a1 is same as b.b1 and a.a2 is same as b.b2 like that.
if they not same , i need to know which field differs.
Kindly Share ur ideas.

887268 wrote:
thanks Sven W. ,
above reply clearly shows what my question is.
one column must be primary key, based on that key i need to find out which are the fields having different data..
im strugling with this, i tried the following already, but not able to get.
select the columns from a MINUS select the columns from b.
-- from this i can find whether the difference occurred or not.
but i cant able to get which are the fields value changed.Good. Then you would match the rows using the PK column and need to compare the columns
Instead of a MINUS + UNION ALL + MINUS we can now use a FULL OUTER JOIN
It is a little task to write out all column names, but 40 columns can be handled.
This statement would show you both tables with matching rows on the same line.
select a.*, b.*
from a
FULL OUTER JOIN b on a.id = b.idNow filter/check for mismatches
select case when a.col1 != b.col1 then 'COL1 value changed'
                when a.col2 != b.col2 then 'COL2 value changed'
                when a.col3 != b.col3 then 'COL3 value changed'
         end as compare_result
        ,a.*, b.*
from a
FULL OUTER JOIN b on a.id = b.id
/* return only non matching columns */
where (a.col1,a.col2,a.col3) != (b.col1,b.col2,b.col3) You might need to add nvls to take care of null values. Test this!
Another way could be to group upon the primary key
select *
from (
select id
           ,count(distinct col1)-1 cnt_col1
           ,count(distinct col2)-1 cnt_col2
           ,count(distinct col3)-1 cnt_col3
   from
     select 'A' source, a.*
     from a
     UNION ALL
     select 'B' source, b.*
     from b)
   group by ID
/* only records with differences */
where 1 in (cnt_col1, cnt_col2, cnt_col3)
;The count columns will hold either 1 or 0. If it is 1 then this column has a difference.

How To Know The Column Name Of The Internal Table

HI ,
 i have an internal table .
f1 f2 f 3 f4 f5
matnr mbrsh mtart meins minbe
i want to know the column name which depending on the value i.e . if it is matnr then f1 , if mbrsh it is f2 ..so on
Thanks.

Hi ,
 thanks for your replies . i am elaborating my query .
 I have an internal table with 80 fields i.e.f1,f2,f3......f80 . In the first index i will be having the fieldnames
i.e.matnr , mbrsh , meins , mtart ..... . From second index onwards i will be having the corresponding data for the field name. i need to display a particular field in a table control . Here i will be knowing the fieldname. If i can get to know the column name i.e whether f1 or f2 or ... .i Can populate the data into the table control.
Wht i have done is taken a field symbol and used the following code.
read table i_upload index 1 assigning <lv_upload>.
here i will get the initial first record i.e
F1 MATNR
F2 MBRSH
F3 MTART
F4 WERKS
F5 LGORT
F6 VKORG
F7 VTWEG
F8 MAKTX
F9 MEINS
F10 MATKL
F11 BISMT
F12 BRGEW
F13 GEWEI
F14 NTGEW
F15 GROES
F16 KLART
F17 CLASS
F18 SPART
F19 VRKME
F20 UMREN
now i want to the field name .
Hope it is clear this time .
Thanks.

How to find the Column data type changes in table

Hi All,
I need to find out the column data type changes where made recently in table .
How do i check past changes in column data type. Any data dictionary are there to find out the data type changes in the column .
Thanks in advance..


You have the answer on hand (user_arguments / all_arguments)!
SQL> desc user_arguments
Name Null? Typ
OBJECT_NAME VARCHAR2(30)
PACKAGE_NAME VARCHAR2(30)
OBJECT_ID NOT NULL NUMBER
OVERLOAD VARCHAR2(40)
ARGUMENT_NAME VARCHAR2(30)
POSITION NOT NULL NUMBER
SEQUENCE NOT NULL NUMBER
DATA_LEVEL NOT NULL NUMBER
DATA_TYPE VARCHAR2(30) --> Data Type
DEFAULT_VALUE LONG
DEFAULT_LENGTH NUMBER
IN_OUT VARCHAR2(9) -->Argument direction (IN,OUT,or IN/OUT)
DATA_LENGTH NUMBER
DATA_PRECISION NUMBER
DATA_SCALE NUMBER
RADIX NUMBER
CHARACTER_SET_NAME VARCHAR2(44)
TYPE_OWNER VARCHAR2(30)
TYPE_NAME VARCHAR2(30)
TYPE_SUBNAME VARCHAR2(30)
TYPE_LINK VARCHAR2(128)
PLS_TYPE VARCHAR2(30)
CHAR_LENGTH NUMBER
CHAR_USED VARCHAR2(1)
Look for Data_Type where IN_OUT say OUT. That will be the data type retruned by that function.
Edited :
or POSITION in argument list,or null for function return value
-SK

HOW to add Dynamic Columns in ADF Faces CORE Table

In ADF im going to display the dynamic column in Coretable,
Header are displaying very fine. but im unable to display rows sucessfuly,how to resolve.
Second thing is that JSF page isn't getting the value from dataList, whats wrong in JSF code.
// JSF PAGE CODE
 <af:table binding="#{backing_test1.table1}" id="table1"
value="{backing_test1.dataList}" var="myRec"/>
 public void setTable1(CoreTable table1) {
 this.table1 = table1;
 public CoreTable getTable1() {
//create this table
table1 = new CoreTable();
CoreColumn dynamicCol;
CoreOutputText outText;
Application app=FacesContext.getCurrentInstance().getApplication();
DCIteratorBinding iter = (DCIteratorBinding)bindings.get("listAllMonthsIter");
RowSetIterator rsIter = iter.getRowSetIterator();
rsIter.reset();
Row row;
while (rsIter.hasNext()) {
row = rsIter.next();
String header = (String)row.getAttribute("element");
// element contain the value JAN, FEB...
dynamicCol = new CoreColumn();
dynamicCol.setHeaderText(header);
String currRec = table1.getVar();
outText = new CoreOutputText();
ValueBinding vb = app.createValueBinding("#{myRec.value}");
outText.setValueBinding("value",vb);
outText.setRendererType("Text");
dynamicCol.getChildren().add(outText);
table1.getChildren().add(dynamicCol);
public void setDataList(List dataList) {
this.dataList = dataList;
public List getDataList() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("listAllMonths");
if (operationBinding == null)
return null;
List dataList = (Vector)operationBinding.execute();
return dataList;
}

Well issue is that
I have a list of values that can be chnaged any time during application execution sya its list of Fav Fruits..
and in an other page i need a data table having these fruits as coulmns and their details as rows...
how to achieve this..
we can not guess the number of columns before time.. so can make the estimate and hide them.

How to add a column of checkboxes in a table?

Hello, can anyone help me with this?
I'm using myfaces , and I want to add a selectManyCheckBox inside a table, in order to select multi-row of the
table.
My code didn't work. It seems that I can only use static values for the 'itemValue' attribute of <f:selectItem> tag.
May someone give me some suggestion?
Here is my page:
<f:view>
<x:saveState value="#{fishSalesBean}"></x:saveState>
<h:form>
<h:panelGrid columns="1" columnClasses="first, first, first, first">
<x:dataTable id="dataTable" value="#{fishSalesBean.fishes}" var="fish"
width="800" columnClasses="first, first, first, first" binding="#{fishSalesBean.dataTable}">
<h:column>
<f:facet name="header">
<h:outputText value="Select"/>
</f:facet>
<x:selectManyCheckbox id="checkboxes" layout="pageDirection" value="#{fishSalesBean.selected}">
<f:selectItem itemValue="#{fishSalesBean.dataTable.rowIndex}" itemLabel=" a"/>
</x:selectManyCheckbox>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="FishName"/>
</f:facet>
<h:outputText value="#{fish.name}"></h:outputText>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="picture"/>
</f:facet>
<h:graphicImage value="#{fish.picUrl }" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="price"/>
</f:facet>
<h:outputText value="#{fish.price}"></h:outputText>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="isSold"/>
</f:facet>
<h:outputText value="#{fish.sold}"></h:outputText>
</h:column>
</x:dataTable>
<h:commandButton value="Show Selected" action="#{fishSalesBean.showSelected}"></h:commandButton>
</h:panelGrid>
</h:form>
</f:view>

Check the "Select multiple rows" chapter of this article for 2 ways of selecting multiple rows in a table using checkboxes: http://balusc.blogspot.com/2006/06/using-datatables.html

How to Insert 3 Column details in a single table from the parent table.

From the Parent Table i need to insert rows which are all under this column {(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN) } into SALES_TRADEIN Table .
I have used the below Query,
But it reads only (TradeIn _1_Vin) Column in the SALES_TRADEIN table rest 2 records got skipped..
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN else @TradeIn_1_VIN end,
case when @TradeIn_1_Make is null then @TradeIn_2_Make else @TradeIn_1_Make end,
case when @TradeIn_1_Model is null then @TradeIn_2_Model else @TradeIn_1_Model end,
case when @TradeIn_1_ExteriorColor is null then @TradeIn_2_ExteriorColor else @TradeIn_1_ExteriorColor end,
case when @TradeIn_1_Year is null then @TradeIn_2_Year else @TradeIn_1_Year end,
case when @TradeIn_1_Mileage is null then @TradeIn_2_Mileage else @TradeIn_1_Mileage end,
case when @TradeIn_1_Gross is null then @TradeIn_2_Gross else @TradeIn_1_Gross end,
case when @TradeIn_1_Payoff is null then @TradeIn_2_Payoff else @TradeIn_1_Payoff end,
case when @TradeIn_1_ACV is null then @TradeIn_2_ACV else @TradeIn_1_ACV end,
case when @TradeIn_1_InteriorColor is null then @TradeIn_2_InteriorColor else @TradeIn_1_InteriorColor end
END TRY
Actually my problem is
If [(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN)] these 3 columns have details i need all the 3 columns details need to be read to SALES_TRADEIN table.
Suppose if we have data only in [(TradeIn_1_VIN),(TradeIn_2_VIN)] then these column details need to loaded in the SALES_TRADEIN table.
If any columns are blank no problem it can move next process.
Please help me change those particular lines to insert all the 3 records (TradeIn_1_VIN) (TradeIn_2_VIN) (TradeIn_3_VIN) in to the table.

you've not given us the full info about the tables. The posted code also makes not much sense to me as all I can see are values getting inserted from some variables which is not required here as your values come from a table and variables can handle only
one set of values a time which would require unnecessary iteration logic.
I think what you need is something like below
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
SELECT t.TradeIn_VIN,
t.TradeIn_Make,
t.TradeIn_Model,
t.TradeIn_ExteriorColor,
t.TradeIn_Year,
t.TradeIn_Mileage,
t.TradeIn_Gross,
t.TradeIn_Payoff,
t.TradeIn_ACV,
t.TradeIn_InteriorColor
FROM Parent p
CROSS APPLY (VALUES
(TradeIn_1_VIN,
TradeIn_1_Make,
TradeIn_1_Model,
TradeIn_1_ExteriorColor,
TradeIn_1_Year,
TradeIn_1_Mileage,
TradeIn_1_Gross,
TradeIn_1_Payoff,
TradeIn_1_ACV,
TradeIn_1_InteriorColor),
(TradeIn_2_VIN,
TradeIn_2_Make,
TradeIn_2_Model,
TradeIn_2_ExteriorColor,
TradeIn_2_Year,
TradeIn_2_Mileage,
TradeIn_2_Gross,
TradeIn_2_Payoff,
TradeIn_2_ACV,
TradeIn_2_InteriorColor),
(TradeIn_3_VIN,
TradeIn_3_Make,
TradeIn_3_Model,
TradeIn_3_ExteriorColor,
TradeIn_3_Year,
TradeIn_3_Mileage,
TradeIn_3_Gross,
TradeIn_3_Payoff,
TradeIn_3_ACV,
TradeIn_3_InteriorColor)
)t(TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to index a column in an interval partitioned table

Similar Messages

Maybe you are looking for