How to initialize my Directory Server

my data are stored in a RDBMS, and now I want to transform the data into Sun Derectory Server. The problem is when the data are mass, how to do the transformation. I don't know if there is any tool to do this, or I have to develop my own program to do this.
hope some information.
thanks.

In CDE X-Windows terminal, run �prodreg� to uninstall components.
# prodreg
If �prodreg� does not work, manual �clean-up� may be performed:
# rm �f /var/sadm/install/productregistry
# rm �f /var/sadm/install/logs/*_install*
# cd /var/sadm/pkg
# rm �rf SUNWdsv* SUNWasv* SUNWcomds
Then unset the �installed?� flag(s) in /etc/ds/versions (this may not apply to your case)
#version|command path|installed?|default?
5.1|//usr/iplanet/ds5/sbin/directoryserver|YES|NO
5.2|//usr/ds/v5.2/sbin/directoryserver|NO|YES

Similar Messages

How to clear the directory server cache?

How to clear the directory server cache?
we are using the directory server 5.2
Thanks,
Subbu

try asking it here - http://forum.java.sun.com/forum.jspa?forumID=761

How do I implement Directory server 5.1? Install it and then buy licences later?

I am new to Directory Server 5.1 and need to install it as a pre-req to a 3rd party product.
Is the server freeware? If not how much does it cost do I have to buy licences separately once I download the server?

I believe, you can download develop and test on iPlanet Directory Server 5.1 for free. When you deploy in commercial production environment, you will need licenses. The licenses are per LDAP entry. So if you use more entries you pay more.

How to operate iplanet directory server with jms?

could u me some sample code or advice?
tks

May I ask where did you get the bits for iWS 6.0 SP3? The latest version currently available for download is iWS 6.0 SP2.
http://wwws.sun.com/software/download/download/
Thanks

How to Configure Directory Server 6 In configure later mode

Hi ,
I would like to know how to configure the directory server in configure later mode.
I have done it in JES4 using the directoryserver command. Which is the command to be used in JES5 for configuring the directory server after the binaries are installed.
It would be great if anyone could refer me to the documentation for the configure later mode.
Thanks,

There has been quite a few posts on blogs.sun.com with regards to configuring DS instances after installation.
It is part of the installation guide as far as I can remember.
Check <http://blogs.sun.com/marginNotes/entry/the_version_6_cli%3A_getting>
Regards
Ludovic,

Can JRE for Sun One Java Directory Server 5.2 be upgraded to JRE 6.0 Update

I am trying to upgrade jre installed with Sun One Java DS 5.2 from 1.5.0 to JRE 6.0 Updat 16. Is this possible?

I never received any feedback on my question.
I am attempting to upgrade our JRE version (installed with Sun One Directory Sever 5.2) from 1.4 to 1.6. I've installed JRE 1.6 Update 16 and set the JAVA_HOME environment variable to d:\programs\java\jre6 and don't know how to configure the directory server to run the 1.6 java version. Any help would be greatly appreciated.
Edited by: CDRA on Feb 2, 2010 6:17 PM

Integrating Sun Java Directory Server with Sun Java Application Server 7

Hi,
My basic goal is to implement Single Sign On within the network i,e if the user is inside the company's network and tries to access any application, then he should not be required for Username/password again becuase he is in the network.
My question is Is this possible with Sun Java System DIrectory server. If yes how can we integrate Directory Server with Sun Java System Application Server 7 2004Q2.
Please help.
Thanks

Directory Server in itself doesn't provide any kind of SSO functions. Basically it is a high performing data repository accessible via LDAP and DSML. It is, however, a key component used by SSO applications like Access Manager. If your applications are web applications then take a look at Access Manager for your SSO needs.
Regards,
Scott

Write performance in Directory Server 5.0

Hi,
is it possible to generate around 350 updates / second with IDS 5.0 ?
I haven't chosen any Hardware yet, because I can't find anything
on how to size a Directory Server according to write performance.
Has someone experience with write performance and how it scales
using more CPU / RAM ?
Thanks,
Sascha
Sascha Hemmerling eMail:
[email protected]
Dweerkamp 13
24247 Mielkendorf Tele: +49-4347-713258

Were you trying to create a new index and then reintdex the Database....if so Did you check the free space of your database filesystem??because it mentions about space problem for the database..after reindexin

Directory Server running GMT instead of BST

Just noticed that my server time is BST, but my Directory Server time is GMT so the timestamps are an hour behind.
I suspect this has always been the case and never been a problem, but I have just implemented a job that checks for updates in the last hour.
This is obviously not working quite as well as I hoped!
Problem is that I do not know how to change the Directory Server time and a quick search of docs and Google doesn't seem to have thrown up anything useful. Anyone had a similar problem and managed to fix it?
Thanks,
Mark.

Avon,
You are right abt that one.Infact sun just provided us a hotfix for the same.
Just curious,where do u find this list of known bugs?
Though the memory problem was fixed we ran into problems of the directory server crashing with a core.Ananlysis of the core shows that there was segmentation fault during replication.
The core says :
SIGSEGV: Segmentation Fault
g0 0 l0 ff36692c shi_allocSmall2+0x230
g1 ff18c000 slapi_delete_internal_set_pb+0x560 l1 3c
g2 22558 _start+0x5d8 l2 880010
g3 ff2036cc l3 42d0000
g4 ff4 l4 0
g5 67452301 l5 fff0
g6 0 l6 88022c
g7 fdcb1d70 l7 4
o0 42d1038 i0 0
o1 fdcb0f64 i1 fdcb100a
o2 63 i2 fdeb239c ruv_update_ruv+0x578
o3 10 i3 fed6c568 tipthread_rwlock_rdlock+0xa8
o4 4a20010 i4 237c0 do_compare+0x14
o5 410404 i5 0
sp fdcb0f00 fp fdcb0f60
o7 ff366d0c MemFreePtr+0xa4 i7 fdeb238c ruv_update_ruv+0x568
y be81ba
tstate: 4482001a02 (ccr=0x44, asi=0x82, pstate=0x1a, cwp=0x2)
pstate: ag:0 ie:1 priv:0 am:1 pef:1 mm:0 tle:0 cle:0 mg:0 ig:0
pc ff18c33c dl_get+4: ld [%i0 + 0x4], %o4
npc ff18c340 dl_get+8: cmp %o4, 0x0
dl_get() + 4
[savfp=0x0,savpc=0x0]
data address not found

Directory Server (partially installed) on ips60

Hi I have followed the instruction "Configuring an Existing Remote Sun ONE Directory Server for Use With Sun ONE Portal Server" from "Sun ONE Portal Server Release Notes � March 2003" to install an exteral ids.
I have done the patch by copying the cos-plugin.so to the appropriate directory from INSTALL_HOME/portal/ds_patch/113177-01/SUNWamds/root/var/opt/SU
NWps/tmp/113177-01/.
After restaring the directory server, I run the ./pssetup during the installation a message appearing as:
Detected components:
Directory Server (partially installed)
Problems may result if partially installed components are used!
Remove options:
1) Remove Directory Server only
2) Continue with install
3) Exit
Choice? [3]
Is it supposed to show like this? And we ignore the problem and continue with Choice No.2?
I am currently testing Portal to sit on iAS7 and also installed an external ids51p1. All on the same machine.
Please advice

Roger,
I have confirmed that they have been combined into one package.
The question now is how can I trick Directory Server 5.2 into thinking they have been installed?
Thanks!
Joshua Preston.
Have you checked the Solaris 10 companion CDs? I
looked at my JES2005Q1 distro and you're right, those
packages are there for Sol 8 and 9, but not for 10.
I checked a couple of our Sol10 machines and neither
r had them.
If they're not on the companion CDs, I'd open a case
with tech support. This is a pretty serious
oversight.
HTH,
Roger S.

How to install Small Business Server 2008 in an existing Active Directory domain

It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?

Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ?

How do I bind to directory server with SSL and authentication?

I'm running Lion Server 10.7.3, Open Directory master. In Open Directory/Settings/LDAP, I've checked the box to Enable SSL and selected a (self-signed) certificate. In Policies/Binding, I've checked the box to Enable Authenticated Directory Binding.
Testing with a client computer on which Snow Leopard has been freshly installed and fully updated, I went to System Prefs/Accounts to bind to the new directory server. The good news is, the binding was successful, and when the client initiates an AFP connection with the server, it uses Kerberos, creating a ticket as expected. (Which doesn't work with Lion clients, alas, but that's a seperate matter.)
Here are the problems:
1) It looks like the binding did not use SSL. By which I mean that when I opened Directory Utility and examined the LDAPv3 entry, the SSL checkbox was not checked. (If I then check the box, everything looks fine until I restart the client, after which I have a red dot. So I'm guessing that checking the box does nothing until after restart, and that it breaks the binding.)
2) I was never prompted to authenticate for the directory binding.
So I get that literally I'm *enabling* SSL and Authenticated Directory Binding, but it seems like the defaults are to bind without SSL or authentication, and there's no obvious-to-me way to force the binding to use those things. How do I do that?
What I'd really like to do is *require* SSL and Authenticated Directory Binding. I want this because my belief (correct me if I'm wrong) is that if authentication is required to bind to the server, no one will be able to bind to my server without my permission, and that SSL offers a more secure connection to my server than not-SSL. How do I require these things, or do I not really want to?
Thank you.

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

Messenger Express: How do I add the Directory Server to the address book search tool?

In Messenger Express (ME) how do I add the Directory Server (DS) to the address book
search tool?
<P>
Edit the globals.pl file. Look for a line similar to: <BR>
@dirservers = ('MyCompany::phonebook.foo.com::o=FooCorp.,c=US','Four11 Directory::ldap.four11.com::');
<P>
Add an entry to the list. The list is comma delimited and each entry is a
string. The string contains three fields, delimited by a double colon (::). The
first field is the name you want to appear in the User Interface (UI). The second is
the hostname of the DS and the third is the Distinguished Name (DN) to use when searching.
<P>
Please note, Messenger Express is part of the Messaging Server. For more
information on Messenger Express, please see the release notes at
http://home.netscape.com/eng/server/MExpress/relnotes.htm

You can't add a new contact to specific group and there is no app for this. 3rd party apps don't have access to private iPhone APIs with security concerns being a primary reason, which such a function would require.

How to create a directory in application server

Hi all,
How to create a directory in application server through Progaram??
eg:\tmp - is already existing
I want to create \tmp\fi
Within \tmp\fi - i should able to store my file,,,
Kindly help me urgent...

Hello San,
Either contact Basis guys at ur end for the same or u can do it dynamically via a piece of ABAP code, i hope it wll help u.
call function 'GUI_CREATE_DIRECTORY'
     exporting
dirname = '//<ip_address>/qfilesvr400/<host>/usr/sap/TST/SYS/Folder1'
     exceptions
          failed = 1
          others = 2.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.

Help!! How to install and use Sun ONE Directory Server Resource Kit 5.2

Hi ! Friend:
I have some problem on install and use Sun ONE Directory Server Resource Kit 5.2, when I execute "java DSRK", afterwards something like this : com.iplanet.install.until.wbResource::gerstring:resource bundle"locale.resources.S1DSRKResource" not found appeared in the window ,that's why?
Meanwhile ,can you give some data about it on how to use it ?
Thank you !

You should be aware of the following characteristics of your directory when using this tool:
Size and number of entries.
Directory structure and access permissions.
Virtual attributes, class of service, and indexing.
Usage, types of access, and access patterns.
Post your error messages completely.
Thanks
--Britto

How to initialize my Directory Server

Similar Messages

Maybe you are looking for