How do I bind to directory server with SSL and authentication?

I'm running Lion Server 10.7.3, Open Directory master. In Open Directory/Settings/LDAP, I've checked the box to Enable SSL and selected a (self-signed) certificate. In Policies/Binding, I've checked the box to Enable Authenticated Directory Binding.
Testing with a client computer on which Snow Leopard has been freshly installed and fully updated, I went to System Prefs/Accounts to bind to the new directory server. The good news is, the binding was successful, and when the client initiates an AFP connection with the server, it uses Kerberos, creating a ticket as expected. (Which doesn't work with Lion clients, alas, but that's a seperate matter.)
Here are the problems:
1) It looks like the binding did not use SSL. By which I mean that when I opened Directory Utility and examined the LDAPv3 entry, the SSL checkbox was not checked. (If I then check the box, everything looks fine until I restart the client, after which I have a red dot. So I'm guessing that checking the box does nothing until after restart, and that it breaks the binding.)
2) I was never prompted to authenticate for the directory binding.
So I get that literally I'm *enabling* SSL and Authenticated Directory Binding, but it seems like the defaults are to bind without SSL or authentication, and there's no obvious-to-me way to force the binding to use those things. How do I do that?
What I'd really like to do is *require* SSL and Authenticated Directory Binding. I want this because my belief (correct me if I'm wrong) is that if authentication is required to bind to the server, no one will be able to bind to my server without my permission, and that SSL offers a more secure connection to my server than not-SSL. How do I require these things, or do I not really want to?
Thank you.

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

Similar Messages

  • How to use the same OC4j server with different port number

    How to use the same OC4j server with different port numbers..?
    I have to OC4J installed on my machine on different hard disk drives....
    I want to be able to run both the server simultaneously..?
    is it possible ..it yes then how..?
    for that i have changed the port number of one server...
    but when i am trying to start the other server with different port number..it says that JVM -Bind already...
    Is there any clues...?
    Nilesh G

    In the config directory:
    default-web-site.xml: Change the port the HTTP listener listens on
    jms.xml: Change the port the JMS service listens on
    rmi.xml: Change the port the ORMI listener listens on.
    Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
    Rob
    Oracle

  • Messenger Express: How do I add the Directory Server to the address book search tool?

    In Messenger Express (ME) how do I add the Directory Server (DS) to the address book
    search tool?
    <P>
    Edit the globals.pl file. Look for a line similar to: <BR>
    @dirservers = ('MyCompany::phonebook.foo.com::o=FooCorp.,c=US','Four11 Directory::ldap.four11.com::');
    <P>
    Add an entry to the list. The list is comma delimited and each entry is a
    string. The string contains three fields, delimited by a double colon (::). The
    first field is the name you want to appear in the User Interface (UI). The second is
    the hostname of the DS and the third is the Distinguished Name (DN) to use when searching.
    <P>
    Please note, Messenger Express is part of the Messaging Server. For more
    information on Messenger Express, please see the release notes at
    http://home.netscape.com/eng/server/MExpress/relnotes.htm

    You can't add a new contact to specific group and there is no app for this. 3rd party apps don't have access to private iPhone APIs with security concerns being a primary reason, which such a function would require.

  • Integrating Sun Java Directory Server with Sun Java Application Server 7

    Hi,
    My basic goal is to implement Single Sign On within the network i,e if the user is inside the company's network and tries to access any application, then he should not be required for Username/password again becuase he is in the network.
    My question is Is this possible with Sun Java System DIrectory server. If yes how can we integrate Directory Server with Sun Java System Application Server 7 2004Q2.
    Please help.
    Thanks

    Directory Server in itself doesn't provide any kind of SSO functions. Basically it is a high performing data repository accessible via LDAP and DSML. It is, however, a key component used by SSO applications like Access Manager. If your applications are web applications then take a look at Access Manager for your SSO needs.
    Regards,
    Scott

  • Active Directory - Server 2008 R2 and 2012 R2 (Server Formatting or not productive

    Hello guys, I come here to try to clarify a great doubts regarding Server Operating Systems, I will attempt to detail the most of my scenario.
    Suppose I have a Server 2008 R2 in production, and this is my Active Directory server (meudominio.local) and am managing through Group Policy settings my workstations that are around 60-70 computers, guys my doubts the thing is, if I need some time to format
    and perform a fresh installation of my server as it will be my Active Directory? Of course I will have lost my domain controller and I have to accomplish the placement of each workstation again that enters my domain one by one.
    I know there is the option of AD replication, so we call the Active Directory, even for another version of the Operating System, prátia already realized this, but it most often comes not functioning properly, done without replication problems Server 2003 to
    2008 R2.
    Guys like to know a solution to not having to put my plants in my domain network again one by one, is there any way to backup so that when I reinstalled the system and the AD again in my server stations return to "see" again that server as your domain
    controller, even me installing AD with the same domain name before this formatting stations do not respond to this driver in this case do the Network ID or add the station to the area again, so she creates a new user profile for example (Max.meudominio) while
    your old profile "guy" still remains on the machine, I adopted the practice of editing the record of this newly created profile and pointing him well for the old user folder which contains all data and settings, eg edit my key "ProfileImagePath"
    regedit logged in with the newly created profile (Max.meudominio) ->
    (switch "ProfileImagePath" C:\Users\Max.meudominio) thus pointing to the folder before replacing in the field again this season after formatted server, thus ->
    (Switch "ProfileImagePath" C:\Users\Max), detail that we give permission for all such user "C:\Users\Max" folder, after that restart the computer and he comes back with the user profile and all your settings.
    I wonder if there is another method to perform this procedure, do not know even a backup AD to not have to replace all the seasons again "meudominio.local".
    Thank you for your attention!
    Translation with Google translator! Sorry.
    Matias Duarte Coordenador de Suporte Dual Solucoes&#174; | Solu&#231;&#245;es em tecnologia da informa&#231;&#227;o

    As the practice of replication I know her mostly said she has some flaws when I do the replication of my domain to another server but it works correctly, so having a server "master" and the other ServidorBKP as "slave", in redundancy,
    the problem is when I say, and put the "ServidorBKP" being my primary domain controller and disabling my main controller, to disable or turn off my main controller the stations themselves are unable to login because it does not communicate with the
    my ServidorBKP "slave" even I put it as the main driver of course.
    Regarding the System State as far as I know this option existed in Server 2003.
    I also got some information, confer on the links below.
    http://msdn.microsoft.com/en-us/library/bb727048.aspx
    http://technet.microsoft.com/pt-br/library/cc758435(v=ws.10).aspx
    http://technet.microsoft.com/en-us/library/cc961934.aspx
    I'm still researching other ways, getting communicate any news to everyone. (Google Translate)
    Matias Duarte Coordenador de T.I. Dual Solucoes® | Soluções em tecnologia da informação http://www.matiasduarte.com.br

  • One server with DAM and more CQ instances

    Hi all,
    do you know if is possible to have one server with DAM and 3 server (Author/Publish) with CQ5 (CRX)? Is possible connect these three servers to one DAM? We have CQ5.5... Thank you for information.

    First, I assume you are calling it a "server" but you really mean two separate servers for each of 1 - 4 (one author instance, and one publish instance).  Is that correct?
    For #3, you called it a "testing" server.  What are you testing?  Code?  If so, you'll want to have a testing instance that matches each instance you have.  Your "website" instances should have a testing server that matches the production environment.  The "intranet" and "other apps" ones should as well.  You wouldn't want to test all of those things on one instance, then separate them out in production.  A production environment that does not match the testing environment is a recipe for disaster.  I also wouldn't try to "migrate" content (DAM assets included) like you do code.  Preload test environments with test content that closely mirror production, but you don't necessarilly need to be exact.  This is especially true of heavy DAM assets.  Just load a subset of videos/images/etc. on testing environments.  It's not necessary to sync this with production.
    Since #1 and #4 are both in the DMZ, I would use the same instance for both of these scenarios.  Do you have a compelling reason to completely separate them?  If you combine them, they share a DAM and the problem is solved.
    For #2, how are you planning to integrate a non-DMZ instance with the others in the DMZ?  This strikes me as a problem.

  • How to make the mobile application work with firewall and anti-virus ON

    Hi,
    I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
    Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
    Thank you

    Dear Rajesh,
    Create a policy in your fire wall to allow the port to send and receive data.
    I believe the port for the mobile should be port 8080 and 8443.
    And your license server port 30000 and 30001
    nd.Q

  • I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

    I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

    Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

  • How do I download a slide show with captions and music to my IPad?  It is not happening when I sync.

    How do I download a slide show with captions and music to my IPad?  It is not happening when I sync.

    The way that you would transfer photos from iPhoto to the iPad would be to sync with iTunes. Connect the iPad to your Mac with the cable and launch iTunes. Select your iPad under the devices heading on the left. Then click on the Photos tab in the iTunes window on the right. You can select the folder from which you want to sync your photos in the drop down menu bar - so select iPhoto there. Then select the album or events that you want to sync from the windows below. After you have made your selections, click on Apply in the lower right corner of iTunes.
    I am not sure how the iPad will handle a slide show in the photos app that was created on your Mac. You can create basic slide shows on the iPad using the different albums, events or faces that you have in the Photo app, but as for the captioning that you have already set up, I don't know how that will work in the app when you sync the slide show.

  • How to display error messages in BAPI_PO_CHANGE  with PO and item ?

    Hello Friends,
    I am calling BAPI_PO_CHANGE to update delivery flag for 50 POs.
    Each PO has 4 line items. For ex.
    10001     10     5.00     material1      X
    10001     20     45.00     material2      X
    10001     30     22.00     material15      X     u201Cerror
    10001     40     45.00     material41      X
    10002     10     46.00     material17      X
    10002     20     25.00     material3      X     u201Cerror
    10002     30     75.00     material5      X     u201Cerror
    10002     40     44.00     material8      X
    u2026u2026u2026u2026u2026..
    u2026u2026u2026u2026u2026
    Now, suppose some line items have error.
    I am able to get it from BAPIu2019s    RETURN table.
    But how can I display that error message with PO and line item?
    NOTE : I am calling BAPI_PO_CHANGE for each PO with ITEM internal table.
    Please guide me.
    Regards
    RH

    The it_change_return fields parameter and row identify the PO_ITEM.
    Try this...
    *&      Form  READ_MESSAGES_OP_CHANGE
          BAPI_PO_CHANGE Return messages
    FORM read_messages_op_change .
      DELETE it_change_return WHERE type = 'W'.
      DELETE it_change_return WHERE type = 'I'.
      LOOP AT it_change_return ASSIGNING <is_change_return>.
        IF <is_change_return>-type = 'E'.
          z_error_flg = 'X'.
        ENDIF.
        v_item = v_item + 1.
        it_log_mess-packagenr = v_packagenr.
        it_log_mess-object = v_object.
        it_log_mess-docnum = v_docnum.
        it_log_mess-itemnr = v_item.
        it_log_mess-type = <is_change_return>-type.
        it_log_mess-id = <is_change_return>-id.
        it_log_mess-mnumber = <is_change_return>-number.
        IF <is_change_return>-parameter <> 'POITEM'.
          it_log_mess-message = text-po1.
          REPLACE '&' WITH z_po_number INTO it_log_mess-message.
          CONCATENATE it_log_mess-message <is_change_return>-message
            INTO it_log_mess-message SEPARATED BY space.
        ELSE.
          READ TABLE it_change_poitem ASSIGNING <is_change_poitem>
            INDEX <is_change_return>-row.
          it_log_mess-message = text-pr2.
          REPLACE '&' WITH z_po_number INTO it_log_mess-message.
          REPLACE '@' WITH <is_change_poitem>-po_item
            INTO it_log_mess-message.
          CONCATENATE it_log_mess-message <is_change_return>-message
                INTO it_log_mess-message SEPARATED BY space.
        ENDIF.
        it_log_mess-message_v1 = <is_change_return>-message_v1.
        it_log_mess-message_v2 = <is_change_return>-message_v2.
        it_log_mess-message_v3 = <is_change_return>-message_v3.
        it_log_mess-message_v4 = <is_change_return>-message_v4.
        APPEND it_log_mess.
      ENDLOOP.
    ENDFORM.                    " READ_MESSAGES_OP_CHANGE

  • How to forward sms messages via email with date and contact received info

    Does anyone know how to forward sms messages via email with date and contact received info.
    Currently when I forward only the body copy of the sms message is sent in the email.

    This is not currently possible. Sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Directory Server 5.0 and 5.1 - Triggers

    Does the previous versions of Sun Java Directory Server 5.0 and 5.1 support LDAP Triggers.
    I need to be clarified soon.

    Hi,
    You can set this in "iPlanet Diretory Server", to force the user to log off after particular time. For more info. check iPlanet Directory server guide.
    Regards,
    Dakshin.

  • How to merge partitions in Windows Server 2008 quickly and effectively?

    How to merge partitions in Windows Server 2008 quickly and effectively?

    Hi,
    In Windows systems we can only extend a partition to unallocated space behind it - so if we have 2 consistent partitions, we can only delete the second one and extend the first one.
    If the 2 partitions are on 2 different disks, you can also create a spanned volume - you will still need to delete the second partition and convert both disks to dynamic disk to create the spanned volume. 
    If you have any feedback on our support, please send to [email protected]

  • How do you share thousands of pictures with text and captions outside of PSE?  (PSE 4)

    One of my dad’s retirement passions is family genealogy and old family pictures.  Several years ago I gave my family PSE 4.0 for Christmas so that we could each have backup copies of our dad’s pictures.  Usually once per year, I made backup copies of everything and emailed the DVDs to my brothers and sisters.  Everyone knows the basic PSE 4 functions and share our dad's enjoyment with the old family photos.
    My problem is that my dad is running out of pictures to scan.  He wants to “share” or “show” his photos with others so that he can “borrow” their photo albums in order to scan their photos.  He plans to attend a hometown high school reunion later this fall.  He hopes to "collect" photo albums from cousins and classmates.  I have been struggling with this for several days without any good ideas.
    The scanned pictures lack any text (added as a layer?) or captions.  Creating a slideshow (on my dad’s computer is slow).  Also, a slideshow doesn’t let others select individual pictures to save from the slide show
    He has old pictures pre-PSE 4 that allowed him to add captions directly to the picture when it was scanned.  I never liked this approach as it "destroyed" the actual picture but these old pictures are more easily shared as individual pictures.
    How do you share thousands of pictures with text and captions outside of PSE?  Can you save or export a composite picture with all the layers?
    Thanks in advance for your help and replies.

    I think it is one of the printer option screens that gives me the choice of tabbed 4x6. All of the choices specifiy HP or Other so I am pretty sure it is printer software that offers me this choice.
    Make sure your image has a 4x6 aspect ratio. I have been quite happy with the tabbed 4x6. Just need to remember to load the paper with the tab last.
    So, in elements you set to 4x6, in printer options you should be able to choose 4x6 tabbed paper.

  • Hello! i am from Romania and i want to buy an iphone from the USA site. can i buy it neverlocked? and if it is possible how much should it cost in totat(with transport and the iphone price)?

    hello! i am from Romania and i want to buy an iphone from the USA site. can i buy it neverlocked? and if it is possible how much should it cost in totat(with transport and the iphone price)?

    You can buy a factory unlocked on direct from Apple sim free, make sure you get the right one and not just a contract free one.  I am sure  one of our US members will be able to give you the price.

Maybe you are looking for