How to insert a character and paragraph break at the beginning of a paragraph using Grep
Dear Community!
I am stucked...
I have several books in indesign, which I want to export into epub. I have a standardized procedure, to be able to assign the task to students.
My problem i I have a paragraph style 'heading2' and I would like to insert a paragraph break before which is styled 'new page'.
Here is the theory I have thought about:
-with find and change find the style 'heading2'
-insert a special character + paragraph break before the first character of the paragraph
-with a second find and change find the special character
-replace with nothing and style with 'new page'
My question is how to insert with grep (?) before the first character anything.
Please help me!
Thanks in advance
ND
Look in the flyout panel of your Paragraph panel.
(Or in the Online Help -- a resource a lot of people seem to overlook... It's even *called* "Keep Options". ...
>I have a problem along these lines that I have not found the answer to by searching, and neither have I been able to start a new discussion on this. (These forums are kind of hard to figure out)
... on the top right of THIS web page I can see a heading "Actions", with below it the text "Start a discussion" ...)
Similar Messages
-
How to insert special character from Oracle form builder 10g
Dear all,
I need help. how to insert special character like 'Superscript or Subscript ' from oracle form builder 10g. I had try in Oracle form builder 6i with press ALT+ASCII code in the text item and it work, but in the oracle form builder 10g this method doesn't work... would you like to help me...somebody please...
Best Regard,
Dedy P.T.What do you mean by insert ... from Forms Builder? Do you mean you want to add it as text in a string of pl/sql code or as part of boiler plate text (label) or a value on the Property Palette?
For special characters you would need set NLS_LANG to something that would support the characters you want to use. For the Builder to see the change, you would need to set NLS_LANG to something like:
NLS_LANG=AMERICAN_AMERICA.UTF8
This can be done in the Windows Registry or system. As I mentioned, this will only apply to the Builder and will have nothing to do with a running form. For running forms you would need to set this in default.env. As for things like super and sub scripts, these are font formats and not necessarily characters. For the most part, I don't believe these are supported in Forms. -
How to insert a shoutbox and a counter in a flash file with html code?
How to insert a shoutbox and a counter in a flash file with
html code?
Code shout box
<!-- BEGIN MYSHOUTBOX.COM CODE -->
<iframe src="
http://489676.myshoutbox.com/"
width="152" height="300" frameborder="0"
allowTransparency="true"></iframe>
<!-- END MYSHOUTBOX.COM CODE-->
Code compteur
<script type="text/javascript" src="
http://www.123compteur.com/counterskinable01.php?votre_id=268303"></script><noscript><a
href="
http://www.123compteur.com"
target="_blank">compteur</a></noscript>thx =D
-
How to insert degree, minute and seconds in a cell
How to insert degrees, minutes and seconds in a cell. Need operate trigonometry functions
Hi harrigorri,
Does this work for you?
Degrees
Minutes
Seconds
Decimal degrees
128
26
45
128.445833333333
Formula in E2
=B2+C2÷60+D2÷3600
Font size enlarged to show the division symbol ÷
Regards,
Ian.
Edit: 3600, not 360 -
How to insert some strings in a query with the clausule 'in' in a procedure
Hello fellows.
Do you know how to insert some strings in a query with the clausule 'in' in a procedure (with a variable)?.
I tell us my problem with an example:
I want to use this select but introducing a variable instead the 'value1', 'value2':
select * from table1 where field1 in ('value1', 'value2');
if I declare the variable var1 as:
TC_VAR1 CONSTANT VARCHAR2(50) := '''value1'',''value2'''
and I use it as:
select * from table1 where field1 in (TC_VAR1);
It doesn't work because Oracle takes TC_VAR1 as an all string. I think Oracle takes it as this:
select * from table1 where field1 in ('value1, value2');
If I use the data type TABLE, I don't know how to use well:
TYPE varchar2_table IS TABLE OF VARCHAR2(10);
tb_var varchar2_table;
select * from table1 where field1 in (tb_var);->It returns an error and there ins't an method that it returns all values.
A curious case is that if I have a sql script (for example script1.sh) with this query:
select * fromt able1 where field1 in (&1)
and I invoke this script as
script1.sh "'''value1'',''value2'''". It works
Can anybody helps me?.
Thanks.Thanks to all. Really.
First, sorry for my English. It's horrible. Thank to all for understand it (my English).
I've resolved my problem with these links:
ORA-22905: cannot access rows from a non-nested table item
and
http://stackoverflow.com/questions/896356/oracle-error-ora-22905-cannot-access-rows-from-a-non-nested-table-item
At last, I have used someting like this:
DECLARE
number_table_tmp NUM_ARRAY:=NUM_ARRAY(410673, 414303, 414454, 413977, 414042, 414115, 413972, 414104, 414062);
BEGIN
FOR c1 IN (SELECT par_id, 1 acc_vdo_id FROM SIG_VIS_CAM
WHERE par_id IN (SELECT * FROM TABLE(number_table_tmp))
UNION ALL
SELECT par_id, 2 acc_vdo_id FROM SIG_ACCAO a
WHERE par_id IN (SELECT * FROM TABLE(number_table_tmp))) LOOP
NULL;
END LOOP;
END;
but first I had to create the type NUM_ARRAY like this:
CREATE TYPE subjectid_tab AS TABLE OF NUMBER INDEX BY binary_integer;
THANK YOU, GUYS. YOU ARE THE BESTS. ;-)
Edited by: user12249099 on 08-sep-2011 7:37
Edited by: user12249099 on 08-sep-2011 7:37 -
How to insert, as an input variable within formula, the total time window on scope (i.e. 20ms/div x 10 div = 200ms)?
BELOW IS AN EXAMPLE OF ISSUE:
FORMULA FOR ACTION INTEGRAL:
STATISTICS:
Input variable: DPO4034(CH1);
Check Box: number of samples.
FORMULA
Input variable 0: DPO4034(CH1); alias: x0
Input variable 1: "Total Time Window on Scope???"; alias: x1
Input variable 2: Number of Samples (CH1); alias: x2
Under Operation Setup: Formula
Y= (x0^2)*(x1/x2)
Output: Processed Data 1 (CH1)
THEN USING STATISTICS:
Input signal: Processed Data 1 (CH1)
Check Box: SUM
Output: CH1 Action Integral [A^2s]
Solved!
Go to Solution.Hi again Catherine,
I have now added another TekScope (TDS3032B) along with the DPO4034 and run the same work-around on the TDS3032B using CH1 as the "real" signal channel and CH2 as the "burst width" channel. However, the value returned for CH2 is nominally 99E+36 (min 99E+36, max 99E+36) with very few retrievals of correct burst width (~200ms). Seems the SignalExpress program is unable to consistently retrieve from TDS3032B the actual burst width (scope's time scale/window) and defaults to 99E+36 value. Any ideas on what is occurring and how to make it work? Attached are some screen captures to help guide discussion.
Regards,
Michael
Attachments:
TDS3032B - incorrect burst width.png 301 KB
TDS3032B - correct burst width.png 287 KB
DPO4034 - always correct burst width.png 302 KB -
I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?
Link the two Macs together and use iPhoto Library Manager
Regards
TD -
upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you backup your computer (http://support.apple.com/kb/HT1427)?
--- If you don't regularly backup your computer, now is the time to start.
4. Do you backup your iPhone (http://support.apple.com/kb/ht1766)?
Check the calendar list on the left hand side of iCal. Is it that the individual events are duplicated or is it just that you have the same calendar listed more than once? If its that you have more than 1 copy of each calendar, you can delete one of the duplicate calendars to eliminate the duplicates.
If you find that it is the individual events that are duplicated then there are 2 options:
1. Restore your computer iCal database or iPhone from a backup made before the duplication occurred.
2. Use a duplication removal program (or do it by hand) to remove the duplicates: http://www.nhoj.co.uk/icaldupedeleter/
If you have a backup made before the duplication occurred, reply back with what kind of backup you have and I'll suggest how to recover the calendars.
To avoid this issue in the future:
Keep regular backups. They are your best defense against data anomalies which are a fact of life in computers (although hopefully rare).
Keep your computer and iPhone software fully up to date (Apple > Software Update / Settings > General > Software Update).
Make sure the date and time on your computer and iPhone are correct before you sync the two devices.
Make sure the cable connections between the two is solid and that the cable shows no signs of physical damage.
Hope that information helps. -
when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help
Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian -
ALV: how to display only subtotals and total rows in the output
ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful -
How to show company name and contact name on the incoming calls of iPhone 4
Kindly provide me with a useful solution of how to show company name and contact name on the incoming calls of iPhone4.
even with an application or from the setting of the iPhone itself, but without telling me a solution like writting the company name in the contact name field.
This is a very important option, i think it is a must, not an option and apple should fix this problem fastly. because it is already available in the older models of iPhone like iPhone 3G and 3GS.
How an important feature like this could be available in old models, but in the later models is not available?Currently not possible without putting the company name in the contact name's field. AFAIK, it's never been available on any iOS version.
You might check the App Store for an app that can do this although I'm pretty sure you won't find one.
http://www.apple.com/feedback/iphone.html -
How to export an album and keep images in the same order in elements 11 mac
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr JosThanks for the tip, Michel
It worked like a charm…
cheers Jos
Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
Re: How to export an album and keep images in the same order in elements 11 mac
created by MichelBParis in Photoshop Elements - View the full discussion
JosU a écrit:
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos
The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I was recently prompted to update iPhoto and make changes to the library. I did it but it keeps hanging up in step 5 or 6 and won't complete the cycle. I have used force quit, rebooted and started again several times. How do i get this to work?
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
If that fails:
Restore from your back up, repair the Library and try again. -
How do I take movies and save them on the iPad?
How do I take movies and save them on the iPad?
Thank you for your help.Tank you Jim for responding: "(swipe Video to the selected position - don't just touch it)."
(I can't believe this!) I open camera. tap video: nothing. Swipe video button (where to?) nothing.
Reading videos at a glance in the iPad user guide gives me nothing. I know I must be missing something.
Thank you for your help.
Walter -
How can I access photos and videos saved to the iCloud?
How can I access photos and videos saved to the iCloud? I backed up my iphone to the Cloud but now the files are nowhere to be found.
I had to reset all content and settings in order to troubleshoot an issue. Before I did this, I backed up the iphone to icloud. When I reprogrammed the phone, I had to set it up as a new device and individually sync apps and other items from itunes. But by doing this, I somehow lost some videos and can't seem to find where they would have been saved/backed up. Can anyone offer any guidance?You can't view photos and videos on icloud (except for shared photo stream pics). iCloud merely sync photos between devices using the stream. If you don't have photo stream turned on, then the only place photos in the camera roll are located are in a backup. You would have to restore from the backup. But be warned that many users have ended up losing their photos when performing a restore, for whatever reason.
What you should do in the future is always sync photos/videos to a computer for storage, don't leave them on a device or trust icloud to somehow store them.
Maybe you are looking for
-
I need Help with the DNS Address
Hi All, I just purchased & installed Mac OS X Server 10.5.4. I would like to host a website & i think the DNS address is wrong. What do I set it at? Any help would be great. Thanks A
-
What's the coolest, slickest way to present multiple ALV reports?
Greetings and good day, everyone. Okay, I'm working on an update program, and the users have identified at least three different reports they would like coming out of this thing. One report is a list of transactions that fail internal logic checking
-
Hp laserjet printer 1300PCL 6/ Hp color laser jet 2605 software installation
please i want to install my window 8 laser jet printers
-
Hi all, I would like to export all the meta data of a package (such as database table names and structure, dataelements, reports, function groups, etc.) into a text file. I could not find an export functionality in the se80. Anyone have any ideas? Th
-
Invoice split due to different price group
Hi Experts, My business scenario starts from scheduling agreement -OBD- Commercial Invoice-Excise invoice - ARE3 Invoice To address different prices in the scheduling agreement i have maintained the pricing based on price group. The two line items fa