How to insert a value in a table using another table

My table is like this
col1 col2 col3
india
Pakistan
my doubt is if i insert India in a table it will automatically insert India Id or code into another table
output i want is like this
col1 col2
10
20
please give the exact query.

u will have to use triggers to achieve the functionality..

Similar Messages

How to insert a value into a table

I have an ordering system. It displays all the orders by
customer ID. If an order is complete, a check number is entered for
the corresponding line item, otherwise it is left blank.
My code uses the following code to display the form. All are
display fields only, except for the last one, where the check
number can be entered.
<cfoutput query="qryDetail" group="partNumber">
<tr>
<td valign="top" class="TitleText"
align="center">#lineItem#</td>
<td valign="top" class="TitleText"
align="center">#OrderNumber#</td>
<td valign="top" class="TitleText"
align="center">#partNumber#</td>
<td valign="top" class="TitleText"
align="center">#dollarformat(qryDetail.unitValue)#</td>
<td valign="top" class="TitleText" align="center">
<cfinput type="text" name="checkNumber#keyID#">
<input type="hidden" name="keyID"
value="#qryDetail.keyID#">
</td>
I use something like the following to update the table with
the check numbers entered.
<cfloop index="KeyID" list="#form.KeyID#"
delimiters=",">
<cfquery name="qryUpdate" datasource="dbName">
update tblChecks
set checkNumber = '#Evaluate("form.checkNumber#KeyID#")#'
where custID = '#form.custID#'
and KeyID = '#KeyID#'
</cfquery>
</cfloop>
Now we have another table that will contain the customer
order history. If the check number was entered for a particular
line item, I need to insert that line item nubmer into this table,
along with some other columns. I tried to use the same loop, then
other loops, but cannot seem to get this to work. Seems simple
enough, but I obvisouly am missing something.
How would I insert the line item number (only if a check
number was entered for that line item) into the table ?

Here is the code with the queries commented out :
<cfloop list="#form.fieldnames#" index="field">
<cfif left(field, 11) is "checkNumber" AND
len(trim(form[field]))>
<cfset keyID = listlast(field, '_')>
<cfset lineItem = listgetat(field, 2, '_')>
<cfset checknum = form[field]>

<cfoutput> loop is
field: #field# 
checknum: #checknum# 
lineitem: #lineitem# 
keyID: #keyID# 
</cfoutput>
<cfelse>
<cfoutput>Else is
field: #field# 
form[field]: #form[field]# 
len: #len(trim(form[field]))# 
</cfoutput><cfabort>
</cfif>
</cfloop>
This is the output. If I do not put in cfabort, the code just
drops thru and I never see any output display, so I use cfabort to
stop so I can see the output.
loop is field: CHECKNUMBER_11_218
CHECKNum: xxxxxxxxxxxxxxxxxxxx
lineitem: 11
keyID: 218
Else is field: CHECKNUMBER_1_24
form[field]:
I entered the x's into checknum for line item 11, so that is
correct.
I then took out the comments from the update query and tried
it again and it updated for line item 11 (you were right, I had to
take out the single quotes in the query). I then removed the
commets for the insert query and it did not insert. I tried the
whole thing again and tried to add to line item 10 and it dropped
straight to the else part, displaying :
Else is field: CHECKNUMBER_1_24
form[field]:
len: 0
So it seems the if statement if failing the second time thru
the loop :
<cfif left(field, 11) is "checkNumber" AND
len(trim(form[field]))>
This is my input statement :
<cfinput type="text"
name="checkNumber_#lineItem#_#keyID#">
I am really confused now. It seems to work the first time
thru the loop, then the second time it fails.

How to Insert the value in oitm table

Dear Members,
   In Item Master, i have created a combobox next to Price List through SDK. if i select a particular value in the combobox and click Add Button in itemMaster, the selected value has to go to oitm table. i dont want to put separate table for that.any body can help me in this regard.
Thanks in Advance

hi,
for eg create a field in OITM table as UDF
TOOLS >>> UserDefinedFields >>> Manage User Fields >>> Master Data >>> Items >>> Items
create UDF Field so that a field UDF will be created in the table OITM (Table for ItemMaster).
Use the Following Code in ItemEvent.
If pVal.FormType = 150 pVal.BeforeAction = False And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD Then
                Try
                   Dim oitem As SAPbouiCOM.Item = SBO_Application.Forms.Item(pVal.FormUID).Items.Item("214")
            Dim oitem2 As SAPbouiCOM.Item = SBO_Application.Forms.Item(pVal.FormUID).Items.Item("107")
            Dim oitem1 As SAPbouiCOM.Item = SBO_Application.Forms.Item(pVal.FormUID).Items.Add("UserItem", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX)
            oitem1.Left = oitem2.Left
            oitem1.Width = oitem2.Width
            oitem1.Top = oitem.Top
            oitem1.Height = oitem.Height
            oitem1.LinkTo = "215"
            oitem1.Visible = True
            oitem1.DisplayDesc = True
            Dim oCombo As SAPbouiCOM.ComboBox = oitem1.Specific
            oCombo.DataBind.SetBound(True, "OITM", "U_UDF")
            oCombo.ValidValues.Add("M", "M")
            oCombo.ValidValues.Add("L", "L")
            oCombo.ValidValues.Add("E", "E")
                Catch ex As Exception
                    SBO_Application.StatusBar.SetText(ex.Message, SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                End Try
            End If
after binding UDF field to Combobox it adds to database automatically on clicking add.
regards,
varma

SQL Server 2012 Management Studio: Creating a Database and a dbo Table. Inserting VALUES into the table. How to insert 8 Values for future use in XQuery?

Hi all,
In my SQL Server 2012 Management Studio (SSMS2012), I tried to create a Database (MacLochainnsDB) and a dbo Table (marvel). then I wanted insert 8 VALUES into the Table by using the following code:
USE master
IF EXISTS
(SELECT 1
FROM sys.databases
WHERE name = 'MacLochlainnsDB')
DROP DATABASE MacLochlainnsDB
GO
CREATE DATABASE MacLochlainnsDB
GO
CREATE TABLE [dbo].[marvel] (
[avenger_name] [char] (30) NULL)
INSERT INTO marvel
(avenger_name)
VALUES
('Hulk', 1),
('Iron Man', 2),
('Black Widow', 3),
('Thor', 4),
('Captain America', 5),
('Hawkeye', 6),
('Winter Soldier', 7),
('Iron Patriot', 8)
I got the following error Message:
Msg 110, Level 15, State 1, Line 5
There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.
How can I correct this problem?
Please kindly help and advise.
Thanks in advance,
Scott Chang
P. S.
The reason I tried to create the Database, dbo Table, and then to insert the VALUES is to learn the following thing:
You can query the entire node tree with the following xquery statement because it looks for the occurrence of any node with the /* search string:
DECLARE @x xml;
SET @x = N'<marvel>
<avenger_name>Captain America</avenger_name>
</marvel>';
SELECT @x.query('/*');
You can query the avenger_name elements from the marvel_xml table with the following syntax:
SELECT xml_table.query('/marvel/avenger_name')
FROM marvel_xml;
It returns the following set of avenger_name elements:
<avenger_name>Hulk</avenger_name>
<avenger_name>Iron Man</avenger_name>
<avenger_name>Black Widow</avenger_name>
<avenger_name>Thor</avenger_name>
<avenger_name>Captain America</avenger_name>
<avenger_name>Hawkeye</avenger_name>
<avenger_name>Winter Soldier</avenger_name>
<avenger_name>Iron Patriot</avenger_name>
You can query the fourth avenger_name element from the marvel_xml table with the following xquery statement:
SELECT xml_table.query('/marvel[4]/avenger_name')
FROM marvel_xml;
It returns the following avenger_name element:
<avenger_name>Thor</avenger_name>

Hi Scott,
The master database records all the system-level information for a SQL Server system, so best practise would be not to create any user-defined
object within it.
To change your default database(master by default) of your login to another, follow the next steps so that next time when connected you don't have to use "USE dbname" to switch database.
Open SQL Server Management Studio
--> Go to Object explorer(the left panel by default layout)
--> Extend "Security"
--> Extend "Logins"
--> Right click on your login, click "propertites"
--> Choose the "Default database" at the bottom of the pop-up window.
--or simply by T-SQL
Exec sp_defaultdb @loginame='yourLogin', @defdb='youDB'
Regarding your question, you can reference the below.
SELECT * FROM master.sys.all_objects where name ='Marvel'
--OR
SELECT OBJECT_ID('master.dbo.Marvel') --if non empty result returns, the object exists
--usually the OBJECT_ID is used if a if statement as below
IF OBJECT_ID('master.dbo.Marvel') IS NOT NULL
PRINT ('TABLE EXISTS') --Or some other logic
What is the sys.all_objects? See
here.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to insert varchar2 value in timestamp column in table?

Hi all,
Hope doing well,
sir i am using one stored procedure and storing time in varchar2 variable in this format: 08:00:00
now i have to insert this value in timestamp column in table. how to insert this value in timestamp column?
thanks

952646 wrote:
Hi all,
Hope doing well,
sir i am using one stored procedure and storing time in varchar2 variable A "Very Bad Idea"(tm)
When you do this, there is no fundamental difference between "08:00:00" and "here's your sign".
Data should always be stored in the correct data type. For dates and times, that data type is either DATE or TIMESTAMP. Period.
in this format: 08:00:00
now i have to insert this value in timestamp column in table. how to insert this value in timestamp column?
Hopefully as remediation to the original bad design.
thanks

How to insert into more than one table at a time also..

hi,
i am a newbee.
how to insert into more than one table at a time
also
how to get a autoincremented value of an id say transactionid for a particular accountid.
pls assume table as
transactionid accountid
101 50
102 30
103 50
104 35
i want 102 for accountid 30 and 103 for accountid 50.
thank u

@blushadow,
You can only insert into one table at a time. Take a look here :
Re: insert into 2 tables
@Raja,
I want how to extract the last incremented value not to insert.Also, I don't understand your thread title... which was "how to insert into more than one table at a time also.. "
Insert, extract... ? Can you clarify your job ?
Nicolas.

How to insert a value from sequence in Bussiness Components?

How to insert a value from sequence in Bussiness Components?
I would like to do it, but without a triger that would do it before insert.
I know that there is a type DBSequence in BC where you can insert a sequence name but it does not work when I type there my sequence name.
Do you now how to fix that problem?
Bart.

The newer way to do it is to make the type DBSequence and enter the name of the Sequence object in the sequence field. It must match the same name of the sequence object in the database. Next, you have to create a before insert for each row trigger on the table. Basically, something like this:
CREATE OR REPLACE TRIGGER TGB_THEME_SEQ
BEFORE INSERT ON THEME
FOR EACH ROW
DECLARE
BEGIN
-- Assign the id from the sequence if null
     IF( :new.theme_id IS NULL ) THEN
          SELECT THEME_ID_SEQ.nextval
          INTO :new.theme_id
          FROM dual;
     END IF;
END;
In the above example, THEME_ID_SEQ is the seuence object name in the database. If you have the name right but it still fails, then the user you are logging in as probably doesn't have access to the sequence in the database.
Hope this helps.
Erik

How to insert / Update value for PFAKT in BP Relationship

Hi Friends / Experts,
How to insert the value for PFAKT ( Function value ) in BP Relationship in BP tcode , in SAP CRM.
I have tried it but it BAPI_BUPR_CONTP_CREATE. But I need it with BAPI_BUPR_RELATIONSHIP_CREATE Function Module.
Please help me out.
Any Enhancement points in BAPI_BUPR_RELATIONSHIP_CREATE or any user exists. Please let me know.
Regards,
KMF.

you can also acheive this using MERGE( available in sql 2008 and above).
also, you are referring to DTS. DTS is legacy solution now..are you using sql 2000, you can use ssis, if you want and it available in sql 2005. as said, there are multiple ways you can do this.. it find the below one a easy solution, since your are
talking about only one table..
try this example..
create table test1(sno int primary key,sname varchar(20),scity varchar(20))
go
create table test2(sno int primary key,sname varchar(20),scity varchar(20))
go
insert into test1
values(1,'stan','atlanta'),(2,'william','newyork')
go
insert into test2
values(1,'robin','orlando')
go
--set this in you sql job and let it run for every half an hour
MERGE test2 t2
USING test1 t1
ON t2.sno = t1.sno
WHEN MATCHED THEN
UPDATE
SET t2.sname = t1.sname,t2.scity=t1.scity
WHEN NOT MATCHED by target THEN
Insert(sno,sname,scity)
values (sno,sname,scity);
go
--check this table and clean up
select * from test2
go
drop table test1
go
drop table test2
Hope it Helps!!

How to insert 'S&L' in a table

How to insert the value 'S&L' in table.
I am getting error at '&'.
Thanks in advance.
Srini

Those would all work fine in something like SQL*Plus,
but what about when the record is being inserted
using an application? I am making a website using
ASP.NET that uses an Oracle database, and the SET
DEFINE OFF command is not really and SQL command, it
is an SQL*Plus command.But AFAIK only sqplus treats it as a substition variable anyway, though I don't really know asp.net well enough to say for sure.
Is there any way to write an
INSERT statement that can insert a record without the
need for a SET command (in other words, using only
commands that Oracle understands)? Thanks.to be certain you could use
insert into t values ('S' || chr(38) || 'L');

How to set default value of a table using sequence number

Dear all,
Does any body know that how to set default value of a table
using sequence number.
But I don't want to use trigger to do that.
Please help!!!!
Eldon

Andrew is essentially correct. You can get around the trigger,
but not the sequence, if (and this may be a very big if) you can
guarantee that every time an insert is done into the table, from
whatever source, the statement looks something like
INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
 AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
 WHEN 'K15'.
 <fs>-adqnt2 = <fs>-adqnt1.
 CLEAR <fs>-adqnt1.
 WHEN 'MT'.
 <fs>-adqnt3 = <fs>-adqnt1.
 CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to delete null values in a table

hi all,
tell me please any one how to delete null values in a table
example:
in emp table is there
empno ename job mgr sal deptno
7900 scott 7902 2000 10
7499 clerk 7900 20
7834 james manager 3000 30
like this in the above emp table there are some null values are there
so how to delete the null values in emp table
thanks,
regards.
Edited by: user9195968 on Feb 25, 2010 6:30 AM

not too sure what you mean, perhaps you could supply a table description and some sample data
but, consider
delete from table_1 where column_1 is null
commit
/

How to change default value in a table using ALTER TABLE

Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regards

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

How to insert a value in a table using another table

Similar Messages

Maybe you are looking for