How to insert encrypted data by using blowfish into mysql database

Hi
I have encrypted data using blowfish algorithm . And i tried to insert that encrypted data into mysql. it was stored but i dont know that it stores in the same encrypted formate
When i am trying to get the encrypted data from the mysql database and decrypting that data i am getting errors.
Exception are like
input length should be multiple of 8 bits
or Given block are not properly padded
and when i am displaying the data using system.out.println ();
the string is not similar to the string which is in database.
what is the problem how can i solve my problem
thank you

It sounds like your column is a VARCHAR so you need to Base64 or Hex encode the cipertext bytes before putting them in the database.

Similar Messages

How to manage a data file using Business Contact Manager database tool

I set up BCM on my desktop and now want to share with the rest of the office. I downloaded BCM database tool on the C drive
of the server and all was well until I tried to move through the wizard. The only option that gets me to a data file is creating a database. However, I receive the error message "Cannot create a new database. The operation has been rolled back. Please
make sure the database service is running". How can I make this work? Truthfully, I don't want to create a new database - I have already set one up; Restore only gives me the database server instance but no choices for the database name list. I have installed
BCM on another co-workers desktop and allowed the database to be shared with her. What more am I missing? Why can't I get the server to see the data file?

Hi,
If the Database has not been shared, you can't connect to it.
Please also confirm you have been granted permission to access the shared Business Contact Manager database.
You can refer to this article below and there are some factors that you should consider:
Business Contact Manager cannot connect to the shared database
http://office.microsoft.com/en-us/outlook-help/business-contact-manager-cannot-connect-to-the-shared-database-HA010262548.aspx
I hope it can be helpful.
Regards,
Melon Chen
TechNet Community Support

Problem inserting text with special Hungarian characters into MySQL database

When I insert text into my MySQL db the special Hungarian
characters (ő,ű) they change into "?".
When I check the
<cfoutput>#FORM.special_character#</cfoutput> it gives
me the correct text, things go wrong just when writing it into the
db. My hosting provider said the following: "please try to
evidently specify "latin2" charset with "latin2_hungarian_ci"
collation when performing any operations with tables. It is
supported by the server but not used by default." At my former
hosting provider I had no such problem. Anyway how could I do what
my hosting provider has suggested. I read a PHP related article
that said use "SET NAMES latin2". How could I do such thing in
ColdFusion? Any suggestion? Besides I've tried to use UTF8 and
Latin2 character encoding both on my pages and in the db but with
not much success.
I've also read a French language message here in this forum
that suggested to use:
<cfscript>
setEncoding("form", "utf-8");
setEncoding("url", "utf-8");
</cfscript>
<cfcontent type="text/html; charset=utf-8">
I' ve changed the utf-8 to latin2 and even to iso-8859-2 but
didn't help.
Thanks, Aron

I read that it would be the most straightforward way to do
everything in UTF-8 because it handles well special characters so
I've tried to set up a simple testing environment. Besides I use CF
MX7 and my hosting provider creates the dsn for me so I think the
db driver is JDBC but not sure.
1.) In Dreamweaver I created a page with UTF-8 encoding set
the Unicode Normalization Form to "C" and checked the include
unicode signature (BOM) checkbox. This created a page with the meta
tag: <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />. I've checked the HTTP header with an online
utility at delorie.com and it gave me the following info:
HTTP/1.1, Content-Type: text/html; charset=utf-8, Server:
Microsoft-IIS/6.0
2.) Then I put the following codes into the top of my page
before everything:
<cfprocessingdirective pageEncoding = "utf-8">
<cfset setEncoding("URL", "utf-8")>
<cfset setEncoding("FORM", "utf-8")>
<cfcontent type="text/html; charset=utf-8">
3.) I wrote some special Hungarian chars
(<p>őű</p>) into the page and they displayed
well all the time.
4.) I've created a simple MySQL db (MySQL Community Edition
5.0.27-community-nt) on my shared hosting server with phpMyAdmin
with default charset of UTF-8 and choosing utf8_hungarian_ci as
default collation. Then I creted a MyISAM table and the collation
was automatically applied to my varchar field into wich I stored
data with special chars. I've checked the properties of the MySQL
server in MySQL-Front prog and found the following settings under
the Variables tab: character_set_client: utf8,
character_set_connection: utf8, character_set_database: latin1,
character_set_results: utf8, character_set_server: latin1,
character_set_system: utf8, collation_connection: utf8_general_ci,
collation_database: latin1_swedish_ci, collation_server:
latin1_swedish_ci.
5.) I wrote a simple insert form into my page and tried it
using both the content of the form field and a hardcoded string
value and even tried to read back the value of the
#FORM.special_char# variable. In each cases the special Hungarian
chars changed to "q" or "p" letters.
Can anybody see something wrong in the above mentioned or
have an idea to test something else?
I am thinking about to try this same page against a db on my
other hosting providers MySQL server.
Here is the to the form:
http://209.85.117.174/pages/proba/chartest/utf8_1/form.cfm
Thanks, Aron

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
(     "STABBRE" VARCHAR2(20 BYTE),
     "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
     "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

How to insert the data using matrix

Hi
All how to insert the data using matrix feild
plz help me
   thanks
    Loy

Hi Loy,
The best way to fill an entire matrix is to use a DBDatasource, here is some sample code:
Dim oForm As SAPbouiCOM.Form
oForm = SBO_App.Forms.Item("YourFormTypeID")
        '1. Add a DBDataSource to the form
        oForm.DataSources.DBDataSources.Add("OUSR")
        Dim oColumnDBS As SAPbouiCOM.Column
        Dim oColumnUDS As SAPbouiCOM.Column
        Dim i As Integer
        Dim GenEdt As SAPbouiCOM.EditText
        Dim oMatrix As SAPbouiCOM.Matrix
        Dim oColumns As SAPbouiCOM.Columns
        Dim oDBDataSource As SAPbouiCOM.DBDataSource
        oMatrix = oForm.Items.Item("7").Specific
        oColumns = oMatrix.Columns
        '2. DBDataSource: Binding a field / alias of the table to a column
        oColumnDBS = oColumns.Item("V_1")
        oColumnDBS.DataBind.SetBound(True, "OUSR", "U_NAME")
        '3. getting the data sources bound to the form
        oDBDataSource = oForm.DataSources.DBDataSources.Item("OUSR")
        oMatrix.Clear()
        ' Querying the DB Data source
        oDBDataSource.Query()
        ' Adding the data to the matrix
        oMatrix.LoadFromDataSource()
When you want to fill a specific field use :
GenEdt = oMatrix.Columns.Item("V_2").Cells.Item(1).Specific
                GenEdt.String = "Hello"

SQL Loader-How to insert -ve & date values from flat text file into coloumn

Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide.

Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide. Try something like
someDate    DATE 'DDMMYYYY'
someNumber1      "TO_NUMBER ('s99999999.00')"
someNumber2      "TO_NUMBER ('99999999.00s')"Good luck,
Eric Kamradt

How to insert Legacy data into QP_RLTD_MODIFIERS table?

How to insert Legacy data into QP_RLTD_MODIFIERS table in R12 instance.

I would use the API QP_Modifiers_PUB.Process_Modifiers for pushing legacy pricing data into R12. QP_RLTD_MODIFIERS is only used for certain types of discounts (in my prod environnment, only promos have data in this table).

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

How to update transaction data automatically into MySQL database using PI

Dear All,
With reference to subject matter I want a sincere advice regarding how to update transaction data automatically into MySQL database using PI. Is there any link available where I can get step-by-step process.
Ex: I have a MYSQL database in my organization. Whenever a delivery created in SAP some fields like DO Number, DO quantity, SO/STO number should get updated in MYSQL database automatically.
This scenario is related to updation of transactional data into MYSQL DB and I want your suggestions pertaining to same issue.
Thanks and Regards,
Chandra Sekhar

Hi .
Develop a sceanrio between SAP to Database system,When the data updates in SAP Tables read the data and update it in DATA Base using JDBC adapter,but there will be some delay in updating data in MySQL.
serach in sdn for IDOC-TOJDBC sceannario,many documents available for the same.
Regards,
Raja Sekhar

How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

Hi,
Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

If Both tables having References then how to insert the data each other

Hai EveryOne..,
My Sample data.,
Create table emp (empno number primary key,ename varchar2(20));
Create table emp_dup (empno number references emp(empno),ename varchar2(20) primary key);
alter table emp add constraint ename_fk foreign key(ename) references emp(ename);
My Question is How to insert the data into these two tables?
Its a *"Circular Reference"* Concept.
Please ...
Thank You!!

You need to set the DEFERRED clause of the constraint when you create your foreign key as DEFERRABLE by which you can move the constraint validation at transaction level.
In an interview point of view that could be a reasonable answer. But in real time this could be strongly questionable.
Here is an example
SQL> create table emp1 (empno number, ename varchar2(10))
2 /
Table created.
SQL> create table emp2 (empno number, ename varchar2(10))
2 /
Table created. Define Primary Key for two tables
SQL> alter table emp1 add constraint emp1_pk primary key (empno)
2 /
Table altered.
SQL> alter table emp2 add constraint emp2_pk primary key (ename)
2 /
Table altered. Add foreign key for two tables with DEFERRED clause set as DEFERRABLE
SQL> alter table emp1 add constraint emp1_fk foreign key (ename) references emp2(ename) initially deferred deferrable
2 /
Table altered.
SQL> alter table emp2 add constraint emp2_fk foreign key (empno) references emp1(empno) initially deferred deferrable
2 /
Table altered. Now here is the test case
SQL> insert into emp1 values (1, 'karthick')
2 /
1 row created.
SQL> commit
2 /
commit
ERROR at line 1:
ORA-02091: transaction rolled back
ORA-02291: integrity constraint (ARBORU.EMP1_FK) violated - parent key not found So the validation is done at Transaction level. Now let insert the value into both tables.
SQL> insert into emp1 values (1, 'karthick')
2 /
1 row created.
SQL> insert into emp2 values (1, 'karthick')
2 /
1 row created.
SQL> commit
2 /
Commit complete.

How to work on Data Analysis using Stored procedures

How to work on Data Analysis using Stored procedures any suggestions

Carefully? Precisely? Tomorrow? Your question has no context so it means little to an outside reader. Perhaps you should start with some basic research into the data mining features of sql server:
data mining homepage

How to insert a pdf or jpeg image into a blob column of a table

How to insert a pdf or jpeg image into a blob column of a table

Hi,
Try This
Loading an image into a BLOB column and displaying it via OAS
The steps are as follows:
Step 1.
Create a table to store the blobs:
create table blobs
( id varchar2(255),
blob_col blob
Step 2.
Create a logical directory in the database to the physical file system:
create or replace directory MY_FILES as 'c:\images';
Step 3.
Create a procedure to load the blobs from the file system using the logical
directory. The gif "aria.gif" must exist in c:\images.
create or replace procedure insert_img as
f_lob bfile;
b_lob blob;
begin
insert into blobs values ( 'MyGif', empty_blob() )
return blob_col into b_lob;
f_lob := bfilename( 'MY_FILES', 'aria.gif' );
dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
dbms_lob.loadfromfile( b_lob, f_lob, dbms_lob.getlength(f_lob) );
dbms_lob.fileclose(f_lob);
commit;
end;
Step 4.
Create a procedure that is called via Oracle Application Server to display the
image.
create or replace procedure get_img as
vblob blob;
buffer raw(32000);
buffer_size integer := 32000;
offset integer := 1;
length number;
begin
owa_util.mime_header('image/gif');
select blob_col into vblob from blobs where id = 'MyGif';
length := dbms_lob.getlength(vblob);
while offset < length loop
dbms_lob.read(vblob, buffer_size, offset, buffer);
htp.prn(utl_raw.cast_to_varchar2(buffer));
offset := offset + buffer_size;
end loop;
exception
when others then
htp.p(sqlerrm);
end;
Step 5.
Use the PL/SQL cartridge to call the get_img procedure
OR
Create that procedure as a function and invoke it within your PL/SQL code to
place the images appropriately on your HTML page via the PL/SQL toolkit.
from a html form
1. Create an HTML form where the image field will be <input type="file">. You also
need the file MIME type .
2. Create a procedure receiving the form parameters. The file field will be a Varchar2
parameter, because you receive the image path not the image itself.
3. Insert the image file into table using "Create directory NAME as IMAGE_PATH" and
then use "Insert into TABLE (consecutive, BLOB_OBJECT, MIME_OBJECT) values (sequence.nextval,
EMPTY_BLOB(), 'GIF' or 'JPEG') returning BLOB_OBJECT, consecutive into variable_blob,
variable_consecutive.
4. Load the file into table using:
dbms_lob.loadfromfile(variable_blob, variable_file_name, dbms_lob.getlength(variable_file_name));
dbms_lob.fileclose(variable_file_name);
commit.
Regards,
Simma........

How can I turn my Mac using iTunes into an alarm clock?

Here's my question: How can I turn my Mac, using iTunes, into an alarm clock?
I want to be able to put my Mac to sleep but have it set up so that when it wakes up at the predetermined time iTunes will open and start playing the music I've selected....
A "musical alarm clock"...
A friend suggested using the Energy Saver option in Sys. Preferences to wake the computer at the right time. He said that then I could use iCal to start iTunes. I would then have to use an Apple Script to get iTunes to play the song I want.
But is there a SIMPLER way to do this? Are there any programs out there that do this already??
Thanks for any help....

I recently got a copy of AlarmClock Pro from MacWorld UK. It is shareware, I think it is (USD?)19. I haven't had a chance to try it out much, but it does look quite good. I have an older version. The latest version looks even better.
I'm sure there's plenty of freeware apps out there. You might also want to try looking here for an applescript here Doug's AppleScripts for iTunes
p53

How to save the data of ABAP report into a notepad in desktop location???

HI all,
Can any one tell me how to transfer the data of ABAP report into a Notepad.
Actually I have to schedule a ABAP report in background on daily basis and I want to transfer the
whole record into Notepad.
If any program is available for this..please clearify the relevent code for transferring.
Thanks
Rajeev

declare a character type internal table.
now move your data from it_data ( internal table with data ) into table itab.
since you are running this report in background, you cannot save it to the desktop. Instead give any app server location
data: itab(400) occurs 0 with header line.
field-symbols: <fs1> type any.
data: gv_file type rlgrap-filename default 'TEST.TXT'.
data: gv_filepath type rlgrap-filename default <path>.
LOOP AT it_data.
    DO 100 TIMES.
      ASSIGN COMPONENT sy-index OF STRUCTURE it_data TO <fs1>.
      IF sy-subrc = 0.
        CONCATENATE itab <fs1> INTO itab SEPARATED BY ' '.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
    SHIFT itab LEFT DELETING LEADING ' '.
    APPEND itab.
    CLEAR itab.
ENDLOOP.
concatenate gv_filepath '/' gv_file into gv_file.
OPEN DATASET gv_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    LOOP AT itab.
      TRANSFER itab TO gv_file.
    ENDLOOP.
    CLOSE DATASET gv_file.
ENDIF.

How to insert encrypted data by using blowfish into mysql database

Similar Messages

Maybe you are looking for