How to insert same data for diffrent date
please help
I need to insert this data in abc using one single query or pl sql code .
Please assume tab has more than 10 years of data and having millions of record
insert into abc
select count(distinct id) from tab where date = sysdate - 45
insert into abc
select count(distinct id) from tab where date = sysdate - 105
insert into abc
select count(distinct id) from tab where date = sysdate - 195
insert into abc
select count(distinct id) from tab where date = sysdate - 380
insert into abc
select count(distinct id) from tab where date = sysdate - 745
thanks and advance
Hi,
I understand you want to scan the table only once... There is a way to accomplish that (probably easier and more readable then the one I give here also exists), but one thing sure, the tab is scanned once only here:
with counts as (select
count(distinct case when t.date>=sysdate - 45 then t.id else null end) c1,
count(distinct case when t.date>=sysdate - 105 then t.id else null end) c2,
count(distinct case when t.date>=sysdate - 195 then t.id else null end) c3,
count(distinct case when t.date>=sysdate - 380 then t.id else null end) c4,
count(distinct case when t.date>=sysdate - 745 then t.id else null end) c5
from tab t)
select case when l.rn=1 then cnt.c1
when l.rn=2 then cnt.c2
when l.rn=3 then cnt.c3
when l.rn=4 then cnt.c4
when l.rn=5 then cnt.c5
end sums
from counts cnt,
(select rownum rn from dual connect by level <=5) l;What's happening here is
1) we get all counts as 5 columns in one row
2) we put value of each column in a new row
I'm not sure the complexity is worth the result in your case..
Maris
Similar Messages
-
How to use same Data Type and Length for two fields
How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
belnr type RE_BELNR,
awkey type awkey,
awtyp type awtyp,
gjahr type GJAHR,
end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
belnr type RE_BELNR,
awkey type gjahr, " change the data type
awtyp type awtyp,
gjahr type GJAHR,
end of it_bkpf1.
data : begin of it_rbkp occurs 1,
belnr type BELNR_D,
gjahr type gjahr,
lifnr type LIFRE,
xblnr type XBLNR,
end of it_rbkp.
select belnr
awkey
awtyp
gjahr
from bkpf
into table it_bkpf
where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4). "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
gjahr
lifnr
xblnr
from RBKP
into table it_rbkp
for all entries in it_bkpf1
where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM -
How to insert the data from XML to a table
Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
( "STABBRE" VARCHAR2(20 BYTE),
"ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
"ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed... -
SQL Loader-How to insert -ve & date values from flat text file into coloumn
Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide.Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide. Try something like
someDate DATE 'DDMMYYYY'
someNumber1 "TO_NUMBER ('s99999999.00')"
someNumber2 "TO_NUMBER ('99999999.00s')"Good luck,
Eric Kamradt -
How to insert Legacy data into QP_RLTD_MODIFIERS table?
How to insert Legacy data into QP_RLTD_MODIFIERS table in R12 instance.
I would use the API QP_Modifiers_PUB.Process_Modifiers for pushing legacy pricing data into R12. QP_RLTD_MODIFIERS is only used for certain types of discounts (in my prod environnment, only promos have data in this table).
-
If Both tables having References then how to insert the data each other
Hai EveryOne..,
My Sample data.,
Create table emp (empno number primary key,ename varchar2(20));
Create table emp_dup (empno number references emp(empno),ename varchar2(20) primary key);
alter table emp add constraint ename_fk foreign key(ename) references emp(ename);
My Question is How to insert the data into these two tables?
Its a *"Circular Reference"* Concept.
Please ...
Thank You!!You need to set the DEFERRED clause of the constraint when you create your foreign key as DEFERRABLE by which you can move the constraint validation at transaction level.
In an interview point of view that could be a reasonable answer. But in real time this could be strongly questionable.
Here is an example
SQL> create table emp1 (empno number, ename varchar2(10))
2 /
Table created.
SQL> create table emp2 (empno number, ename varchar2(10))
2 /
Table created. Define Primary Key for two tables
SQL> alter table emp1 add constraint emp1_pk primary key (empno)
2 /
Table altered.
SQL> alter table emp2 add constraint emp2_pk primary key (ename)
2 /
Table altered. Add foreign key for two tables with DEFERRED clause set as DEFERRABLE
SQL> alter table emp1 add constraint emp1_fk foreign key (ename) references emp2(ename) initially deferred deferrable
2 /
Table altered.
SQL> alter table emp2 add constraint emp2_fk foreign key (empno) references emp1(empno) initially deferred deferrable
2 /
Table altered. Now here is the test case
SQL> insert into emp1 values (1, 'karthick')
2 /
1 row created.
SQL> commit
2 /
commit
ERROR at line 1:
ORA-02091: transaction rolled back
ORA-02291: integrity constraint (ARBORU.EMP1_FK) violated - parent key not found So the validation is done at Transaction level. Now let insert the value into both tables.
SQL> insert into emp1 values (1, 'karthick')
2 /
1 row created.
SQL> insert into emp2 values (1, 'karthick')
2 /
1 row created.
SQL> commit
2 /
Commit complete. -
How to insert the data using matrix
Hi
All how to insert the data using matrix feild
plz help me
thanks
LoyHi Loy,
The best way to fill an entire matrix is to use a DBDatasource, here is some sample code:
Dim oForm As SAPbouiCOM.Form
oForm = SBO_App.Forms.Item("YourFormTypeID")
'1. Add a DBDataSource to the form
oForm.DataSources.DBDataSources.Add("OUSR")
Dim oColumnDBS As SAPbouiCOM.Column
Dim oColumnUDS As SAPbouiCOM.Column
Dim i As Integer
Dim GenEdt As SAPbouiCOM.EditText
Dim oMatrix As SAPbouiCOM.Matrix
Dim oColumns As SAPbouiCOM.Columns
Dim oDBDataSource As SAPbouiCOM.DBDataSource
oMatrix = oForm.Items.Item("7").Specific
oColumns = oMatrix.Columns
'2. DBDataSource: Binding a field / alias of the table to a column
oColumnDBS = oColumns.Item("V_1")
oColumnDBS.DataBind.SetBound(True, "OUSR", "U_NAME")
'3. getting the data sources bound to the form
oDBDataSource = oForm.DataSources.DBDataSources.Item("OUSR")
oMatrix.Clear()
' Querying the DB Data source
oDBDataSource.Query()
' Adding the data to the matrix
oMatrix.LoadFromDataSource()
When you want to fill a specific field use :
GenEdt = oMatrix.Columns.Item("V_2").Cells.Item(1).Specific
GenEdt.String = "Hello" -
How to use same actions for differ pop-up
Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethiHi,
Take one integer value attribute in the context of view
when you r performing action on POP1 set it's value to 1
when you r performing action on POP2 set it's value to 2
create one method which receives integer argument, say diaplay(int a)
In the action call display(wdContext.currentContextElement().get<intvariable>()) by passing the value in the context attribute
in display() method, Check the value of integer variable..
if it is 1 then perform action related to POP1
if it is 2 then perform action related to POP2
Regards
LakshmiNarayana -
How to use same actions for differ pop-up buttons
Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethiHi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash -
How to insert / Update value for PFAKT in BP Relationship
Hi Friends / Experts,
How to insert the value for PFAKT ( Function value ) in BP Relationship in BP tcode , in SAP CRM.
I have tried it but it BAPI_BUPR_CONTP_CREATE. But I need it with BAPI_BUPR_RELATIONSHIP_CREATE Function Module.
Please help me out.
Any Enhancement points in BAPI_BUPR_RELATIONSHIP_CREATE or any user exists. Please let me know.
Regards,
KMF.you can also acheive this using MERGE( available in sql 2008 and above).
also, you are referring to DTS. DTS is legacy solution now..are you using sql 2000, you can use ssis, if you want and it available in sql 2005. as said, there are multiple ways you can do this.. it find the below one a easy solution, since your are
talking about only one table..
try this example..
create table test1(sno int primary key,sname varchar(20),scity varchar(20))
go
create table test2(sno int primary key,sname varchar(20),scity varchar(20))
go
insert into test1
values(1,'stan','atlanta'),(2,'william','newyork')
go
insert into test2
values(1,'robin','orlando')
go
--set this in you sql job and let it run for every half an hour
MERGE test2 t2
USING test1 t1
ON t2.sno = t1.sno
WHEN MATCHED THEN
UPDATE
SET t2.sname = t1.sname,t2.scity=t1.scity
WHEN NOT MATCHED by target THEN
Insert(sno,sname,scity)
values (sno,sname,scity);
go
--check this table and clean up
select * from test2
go
drop table test1
go
drop table test2
Hope it Helps!! -
How to insert the data even the trigger returned null
Hi Gurus,
I have a question regarding on how to insert the record even the condition being used by a "before insert trigger" returned null.
The scenario is:
2 tables have the same structure:
Table A (Name varchar2 (100), No Number)
Table B (Name_1 varchar2 (100), No Number)
A script is using to load the data into table A daily, and a “before insert trigger” is being used to get the value for A.Name = B.Name whenever the condition A.No equals to B.No.
If the B.No exists, then the trigger work fine, otherwise the records will be rejected, this is not the way we wanted, so I just wonder, is there any way to load all the data to the other fields but still using this trigger ?
Thanks,
TranEither amend the select in the trigger that gets the name value to not raise a NO_DATA_FOUND exception (e.g. change "select name..." to "select min(name)..." ) or handle the NO_DATA_FOUND exception in an exception handler.
e.g.
EXCEPTION
WHEN no_data_found THEN
:new.name = 'where the streets have no name'; -
Select from 2 tables and insert same data into 2 other tables(BPEL Process)
Hi All,
Please suggest me how to select from 2 tables and insert the same data into 2 tables. I am successful in selecting data from 2 tables, but i am not able to insert the same data into 2 other tables. There is foreign key constraint between 2 tables.
Thanks in Advance,
MAHI have created DB Adapter for selecting from 2 tables and also DB adapter for insert and i have created parent child relationship between 2 tables.
I am getting this error
<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>env:Server</faultcode>
<faultstring>com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 6f3fe20c1b031057:-6cc7dfb5:11b8bf5fbe1:-7fa4. Please check the process instance for detail.</faultstring>
</Fault> -
How to insert text data into temp tables....
Dear All,
I have one notepad with three columns, first column is segment1, second column is segment2 & third column is price list....
and there is no delimiter and exact spaces..(i.e, zizak fomat)
Ex:-
xx yy 00009999
kk mmmm 00009333
Data is available like above example...So, I need to insert this data into one table.(2LAKSHS OF RECORDS AVAILABLE IN THAT NOTEPAD)
So, Any can one help me, how to insert this kind of text data into temparory table...
Regards
Krishna
Edited by: user12070109 on May 29, 2010 9:48 PM
Edited by: user12070109 on May 29, 2010 9:49 PMHello,
What manu suggested this can be done through oracle forms.
If as i read your last post you are using that in database it will not work in db. Try to use the same process in oracle forms will work by making some changes.
And if you don't want to use forms then there is one way using SQL LOADER. It required control file to execute for uploading data.
See the below link.
http://www.orafaq.com/wiki/SQL*Loader_FAQ
In this example its showing filename.csv you can use your file name like yourfilename.txt.
So your control file will look like this...
load data
infile 'file_path\file_name.txt'
into table table_name -- use actual table name where you want to upload data
fields terminated by " " -- Here using spaces as you mentioned
(column1, column2, column3) -- Here use the three column names of tableAnd after creating control file with the above code. You can call it in command prompt like this
sqlldr username/password control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
or
sqlldr username/password@dbconnection control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
Before doing this practice make sure SQLLDR.exe availabe in the machine where you have to execute. Otherwise you will have to install db client for using sqlldr.exe
-Ammad -
How to insert/update Date field in Oracle with java code
Dear All
I have to insert/update a date column while creating a new item, but the problem is i am able to insert/update only date but i need both date and time along with AM/PM.
By using these 3 lines i am able to insert/update only date.
java.util.Date date = new java.util.Date();
long dateLong = date.getTime();
stmtPrep.setDate(33, new java.sql.Date(dateLong));
Below code retrives the date exactly what i need but unable to pass in the statement:
DateFormat formatter = new SimpleDateFormat("dd-MM-yyyy HH:mm:ss a");
java.util.Date d = (Date) new java.util.Date();
String stringdate = formatter.format(d);
String tmpdate = dateFormat();
stmtPrep.setString(33, tmpdate); -- I tried with setObject as well but same error coming.
Error is:
ORA-01830: date format picture ends before converting entire input string
Can u guide me how to get full date time with AM/PM?sasikrishna wrote:
Dear All
I have to insert/update a date column while creating a new item, but the problem is i am able to insert/update only date but i need both date and time along with AM/PM.
By using these 3 lines i am able to insert/update only date.
java.util.Date date = new java.util.Date();
long dateLong = date.getTime();
stmtPrep.setDate(33, new java.sql.Date(dateLong));That's by design. A java.sql.Date object matches an SQL DATE column (which doesn't include a time component). If you want something which matches an SQL TIMESTAMP colum (which includes both date and time components) then you should use a java.sql.Timestamp object. -
How to insert the data to selected cell in multicolumn
Hello Labviewer
I am new for labview, and have a problem when i am using a multicolumn listboxes, how can i insert the data to my selected cell,
something like
header XXXmengyi
The property node of the listbox has a "Item Names" property. This is a two dimensional array corresponding accordingly to the row by column listbox. You can modify this array to change the listed string for the selected cell(s).
--Russ
Maybe you are looking for
-
Trying to find someone in the athens, ga area that will work on a 2006 iMac
my computer will not turn on and the local mac store said they will not work on a machine that is more than 5 years old. any suggestions on where to take it for repair? i have a lot of data on the computer that i need to retrieve.
-
Moving house with a slow telephone exchange
hi guys were thinking of moving house to a more rural location but the house is about 3.5km away from billingbourgh exchange and will only get around 1mb internet, does anyone of a way of getting it faster or when the exchange will be updated??
-
Delete(xml) in Flex namespace problem
hihi I have problem with AS3 xml I want delete nodes in the folowing XML, which has title "undefined". A sample from the xml: <xml> <page> <title>Szabályalapú reprezentáció</title> <id>tudásterület_74</id> <revision> <id>1</id> <timestamp>2008-05-27T
-
Night Schedule using DBMS_JOB
How can I schedule a job to run only during night (say between 8pm-5am) using Oracle Job Scheduler?
-
Time Machine forgets which drive to use...
I've got three MBPs which backup onto Time Capsule via Time Machine. Every day or two, on one or another MBP, Time Machine shows the exclamation mark in the Menu Bar icon, and I have to go to Prefences to re-link the Time Capsule with Time Machine, s