How to insert some special Characters in a table

Dear All
I have a value with some italian Characters ..
Like :- )
e l’attivazione - Here the ' symbol is not single quote , it is some ITALIAN characters .
So how can i insert .
I have value like :- e l’attivazione "Trasloco Linea Telefonica”, disponibili sul portale TUO, sezione Accessi/Traslochi"
Insert into ABC values ('e l’attivazione "Trasloco Linea Telefonica”, disponibili sul portale TUO, sezione {code}Accessi/Traslochi"');

Hey,
You can run below command to insert such value in single column of the table.
INSERT INTO ABC VALUES ('e l’attivazione "Trasloco Linea Telefonical, disponibili sul portale TUO, sezione Accessi/Traslochi"');
or you need to get ascii value of the character '’'
e.g.
SELECT ASCII('’') FROM dual;
O/P
14844057
then use this ASCII value in CHR function while inserting data into table
INSERT INTO ABC VALUES ('e l'||CHR(14844057)||'attivazione "Trasloco Linea Telefonical, disponibili sul portale TUO, sezione Accessi/Traslochi"');
When you will query the data from table you be get below value for that column.
e l’attivazione "Trasloco Linea Telefonical, disponibili sul portale TUO, sezione Accessi/Traslochi"
Regards,
Nisarg

Similar Messages

Unable to insert some special characters.

Hi,
I am not able to insert some czech characters into the database. The problem is mainly seems to be due to the characterset. When I query the record, it displays some garbage characters or ? instead of (, ). Can anyone please suggest me a solution for this problem?
The DB characterset is :-
SQL> select * from NLS_DATABASE_PARAMETERS where parameter like '%CHARACTERSET';
PARAMETER VALUE
NLS_CHARACTERSET WE8MSWIN1252
NLS_NCHAR_CHARACTERSET AL16UTF16
Many Thanks in Adbance.
Sam:-)

All characters are stored as a hexadecimal value either in one-byte (usually ASCII) or two-byte (Unicode). The mappings of which characters (or glyphs) go with which hexadecimal values constitutes a character set. Character sets are NOT equivalent to fonts. I used to build them.
It sounds like the character set you are using on the server doesn't match with the character set on the client. This is not an uncommon problem. There are plenty of resources on the web for determining which characters map to which hex values. I recommend that you find the character set being used by the client and compare it to the one on the server. It is usually not a good idea to change the character set on the server after install, but Oracle may be able to help you through that. On the client end, you can look at the application and see if there is a way to change the character set to have it match what is on the server. For the Czech characters, I think that they are present in most ASCII symbolsets, but are not consistently mapped to the same hex values. Thus the problem you are seeing.
Good Luck.

How can I distinguish special characters or signs in Doc through VBA?

How can I distinguish special characters or signs in Doc through VBA?
I have a few large documents written in word 2003 format and now I work on them under word 2007.
Such large documents containing lots of special characters. I want to change them into Microsoft 3.0 equation form（It is required by the team). I find no way but using function AddOLEObject and Sendkeys through VBA. Common characters can be added
to equation by function Sendkeys, but the return value of Asc() or AscW() for "double arrow", "in" , " not greater than " such special characters or signs, to name but a few are the same ,i.e., 40 And I cannot distinguish them.
I found the link http://msdn.itags.org/word/44333/ may be of use to me, and the title is:
How to read symbols from a DOC documents! (Microsoft Word)
the original question is
Using function "InsertSymbol", I can insert a symbol into a document. But
how can I read a symbol from a document?
Using "Characters(i).range.text", I can read a char. But when meeting a
symbol, the value of "Characters(i).range.text" is always '('.How can I get the CharacterNumber of the symbol.
And the final answer is :
Hi chenfeng,
Word protects symbols from symbol fonts if you insert them from the "Insert
> Symbol" dialog.
This is done so they aren't changed when you change the font or style. But
it also results in Word reporting AscW( ) = 40 on all of them.
I've posted a macro to "unprotect" them (or to protect them again if you
want) ... just today again in
Newsgroups: microsoft.public.word.vba.customization
Subject: Symbol Characters
Date: Mon, 3 May 2004 11:00:46 -0700
Message-ID: <09f401c43138$8f92f900$[email protected]>
It isn't archived on Google yet, but tomorrow you should be able to simply
copy the message ID into http://www.google.com/advanced_group_search.
Regards,
Klaus
But the link for the macro in the final answer is missing.
Can anyone with kindness help me? Thaks a lot.

Following Cindy Meister's Advice ,I use MathType SDK.
The sample in MathType SDK in the following may be meaningful,but I do not know how the MTEF for cos^^2Theta, MTEF for sin^^2Theta and MTEF for 1 are generated .
It looks much complicated,and I searched the docs in MathType SDK to get a explanation.Is there any function to generate them? I want to use this method to change commaon text mathematical signs( in special character table) and Greek letters and characters
with subscripts and superscripts to Microsoft 3.0 equation form.
Can anyone with kindness help me?
Sub MTEFTextSubstitution()
    Dim MTEFStr1$, MTEFStr2$, MTEFStr3$
    Dim stat
    'MTEF for cos^^2Theta
    MTEFStr1$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4yaiaac+" + _
        " % gacaGGZbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B65!"
    'MTEF for sin^^2Theta
    MTEFStr2$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4CaiaacM" + _
        " % gacaGGUbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B6A!"
    'MTEF for 1
    MTEFStr3$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaaGymaaaa!36A4!"
    Selection.Copy
    'Init API, reset transform
'    If MTUtil.CheckMTDLLVersion = 0 Then Exit Sub
    If Not IsDLLVersionOK() Then Exit Sub
    MTXFormReset
    'first substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v1>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr1$, Len(MTEFStr1$), 0)
    If stat <> 0 Then
        MsgBox "1st MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'second substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v2>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr2$, Len(MTEFStr2$), 0)
    If stat <> 0 Then
        MsgBox "2nd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'third substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v3>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr3$, Len(MTEFStr3$), 0)
    If stat <> 0 Then
        MsgBox "3rd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'do the substitution
    stat = TransformGraphicEquation
    If stat <> 0 Then
        MsgBox "TransformGraphicEquation returned: " + Str(stat)
        Exit Sub
    End If
    MTTermAPI
    'Paste new equation
    Selection.Collapse Direction:=wdCollapseEnd
    Selection.PasteSpecial Placement:=wdInLine
End Sub

How to find Special Characters in a table ?

Hi,
I have a problem, during a data upload by the client, some special characters were uploaded in the database.
Sample data : " AC Power Cord Denmark "
I want to find all records containing such special characters and update them.
TOAD is able to display these characters but when i copy them onto the query... it doesnt work.
Can we know which encoding is that ? or do something to take care of this ?
Thanks in Advance.
Message was edited by:
Champ

insert into t1 values ('joe$%"likes#$%#to*()ride%^$#his bike');
1 rows inserted
select * from t1;
C1
joe$%"likes#$%#to*()ride%^$#his bike
1 rows selected
select translate(c1,'!@#$%^&*()"','          ') from t1;
TRANSLATE(C1,'!@#$%^&*()"','')
joe likes    to   ride    his bike
1 rows selected
update t1 set c1 = translate(c1,'!@#$%^&*()"','          ');
1 rows updated
select * from t1;
C1
joe likes    to   ride    his bike
1 rows selectedI didn't notice your special special characters, but it still works:
insert into t1 values ('joe likes his'||chr(22));
select * from t1;
select translate(c1,chr(22),' ') from t1;
update t1 set c1 = translate(c1,chr(22),' ');
select * from t1;
Message was edited by:
JoeC

How to insert some records in one table and some records in another table

Interview question
how insert records in two tables by using trigger
CREATE or REPLACE TRIGGER Emp_Ins_Upd_Del_Trig
BEFORE delete or insert or update on EMP
FOR EACH ROW
BEGIN
if UPDATING then
UPDATE emp2
SET
empno = :new.empno,
ename = :new.ename
--, job = :new.job
--, mgr = :new.mgr
--, hiredate = :new.hiredate
, sal = :new.sal
--, comm = :new.comm
--, deptno = :new.deptno;
sdate = :new.sdate,
edate = :new.edate
end if;
if INSERTING then
INSERT INTO emp2
VALUES
( :new.empno
, :new.ename
--, :new.job
--, :new.mgr
--, :new.hiredate
, :new.sal
--, :new.comm
--, :new.deptno
new.sdate,
new.edate);
end if;
if DELETING then
DELETE FROM emp2
WHERE empno = emp2.empno;
end if;
END;
it is working fine but he wants to insert some specific litimit on one table and some specified limit of records in one ..
In this senerio can i insert records by use count of records...
please help me..

Can you be more specific on the "Limit"
Conditional insert can be used in this case.

How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism

Some special characters getting replaced by ? in TOAD

Hi,
I am using TOAD for updating a few records in the DB. Some special characters (non-english) like Staříč get replaced by Sta?í? in TOAD. I tried to set the characer set to default and East Europe under Editor Options, but it still doesn't work.
Any suggestions?

i) Verify your DB characterset can handle these characters
ii) Verify that the correct values are being stored (use dump function)
iii) Verify that NLS_CLient settings match NLS_Server settings
iii) Verify that this is not a windows display issue. ie Windows has been set up to display these characters.
One suggestion is to use OracleSQLDeveloper. You won't have any display issues then. :)
I use it to display arabic charcters and I don't need any registry changes etc
Edited by: Keith Jamieson on Dec 8, 2008 10:47 AM

How to check multiple special characters in instr function sql query.

Hi,
The following special characters are comma(,), slash(/), colan(:)
these special characters i need to be check in instr function.
select SUBSTR(master_title,1,INSTR(master_title,',',1,1)-1) from dual;
Can you please write the query with right answer.
Thanks in advance,
Lakshman.

Why multiple post?
How to check multiple special characters in this query.

How to remove the Special characters like @,#,$ ,..from field

How to remove the Special characters like @,#,$<,..from text field. we nedd to remove any specila char from text field .
ex:text = just#fi%cation@text
the text should be justification.

hi check this ..
data:char(25) value '5#4#2#&1#&',
     char1(9) .
       replace all occurrences of '#' in char with 'and' .
       replace all occurrences of '&' in char with 'num' .
     write: char.
or use this..
data:char(25) value 'test@ing*5#4#2#&1#&',
     char1(9) .
       replace all occurrences of '#' in char with space .
       replace all occurrences of '&' in char with space .
       replace all occurrences of '@' in char with space .
       replace all occurrences of '*' in char with space .
     write: char.
regards,
venkat.

How to insert some strings in a query with the clausule 'in' in a procedure

Hello fellows.
Do you know how to insert some strings in a query with the clausule 'in' in a procedure (with a variable)?.
I tell us my problem with an example:
I want to use this select but introducing a variable instead the 'value1', 'value2':
select * from table1 where field1 in ('value1', 'value2');
if I declare the variable var1 as:
TC_VAR1 CONSTANT VARCHAR2(50) := '''value1'',''value2'''
and I use it as:
select * from table1 where field1 in (TC_VAR1);
It doesn't work because Oracle takes TC_VAR1 as an all string. I think Oracle takes it as this:
select * from table1 where field1 in ('value1, value2');
If I use the data type TABLE, I don't know how to use well:
TYPE varchar2_table IS TABLE OF VARCHAR2(10);
tb_var varchar2_table;
select * from table1 where field1 in (tb_var);->It returns an error and there ins't an method that it returns all values.
A curious case is that if I have a sql script (for example script1.sh) with this query:
select * fromt able1 where field1 in (&1)
and I invoke this script as
script1.sh "'''value1'',''value2'''". It works
Can anybody helps me?.
Thanks.

Thanks to all. Really.
First, sorry for my English. It's horrible. Thank to all for understand it (my English).
I've resolved my problem with these links:
ORA-22905: cannot access rows from a non-nested table item
and
http://stackoverflow.com/questions/896356/oracle-error-ora-22905-cannot-access-rows-from-a-non-nested-table-item
At last, I have used someting like this:
DECLARE
number_table_tmp NUM_ARRAY:=NUM_ARRAY(410673, 414303, 414454, 413977, 414042, 414115, 413972, 414104, 414062);
BEGIN
FOR c1 IN (SELECT par_id, 1 acc_vdo_id FROM SIG_VIS_CAM
WHERE par_id IN (SELECT * FROM TABLE(number_table_tmp))
UNION ALL
SELECT par_id, 2 acc_vdo_id FROM SIG_ACCAO a
WHERE par_id IN (SELECT * FROM TABLE(number_table_tmp))) LOOP
NULL;
END LOOP;
END;
but first I had to create the type NUM_ARRAY like this:
CREATE TYPE subjectid_tab AS TABLE OF NUMBER INDEX BY binary_integer;
THANK YOU, GUYS. YOU ARE THE BESTS. ;-)
Edited by: user12249099 on 08-sep-2011 7:37
Edited by: user12249099 on 08-sep-2011 7:37

How do I create special characters in 10.5.8

How do I create special characters in 10.5.8, like accents above letters.

Paulfhannan wrote:
like accents above letters.
The most common ones for European languages can be created with the normal US keyboard layout using alt/option dead keys. alt + e, then e gives you é. A list:
http://homepage.mac.com/thgewecke/diacritics.html

How to insert line or row in a table?

Hi OAF experts,
can anyone show me how to insert row or line in a table bean by setting the table.setAutoInsertion(false) ?
Thank you.
Jon

As per Dev Guide:---
The other change you can make is to suppress the default Add Another Row button behavior of adding a
single row to the view instance associated with the table, so that you can handle the event with your own code.
The following code example illustrates how to accomplish this:
processRequest
// Enabled add row and turn off the default "Add Another Row" table event
// The add row event has to be auto-handled by developer in processFormRequest
tableBean.setInsertable(true);
tableBean.setAutoInsertion(false);
processFormRequest
if ((tableBean.getName()Equals(pageContext.getParameter(SOURCE_PARAM))) &&
(ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM))))
OAApplicationModule am = pageContext.getApplicationModule(tableBean);
am.invokeMethod("handleInsertRow", null);
// The ***AMImpl.java in which method "handlInsertRow" has been defined
public void handleInsertRow()
OAViewObject vo = findViewObject("voName");
vo.invokeMethod("handleInsertRow");
// The ***VOImpl.java which is associated with the table; and in which the
// handleInsertRow is defined
public void handleInsertRow()
Row row = createRow();
// Set any default attributes
row.setAttribute(...);
// Insert the row into the VO
insertRow(row);
Thanks
--Anil

How to insert a gif file into a table?

Hi,
I need to insert a gif file into a table. Can anyone tell me where I can find the information on how to create this kind of table, how to insert a gif file into a table and how to select?
Thanks,
Helen

Hi Helen,
You could read about that in the documentation which is available online.
For a starter: BLOB. And I bet there are many examples to be found on the web.
Good luck. :)
Regards,
Guido

How to insert select columns from one internal table to another

Hi,
How to insert select columns from one internal table to another based on condition as we do from a standart table to internal table.
regards,
Sriram

Hi,
If your question is for copying data from 1 int table to other ;
we can use
APPEND LINES OF it_1 TO it_2.
or if they have different columns then:
loop at it_1 into wa_it1.
move wa_it1-data to wa_it2-d1.
apped wa_it2 to it_2.
clear wa_it2.
endloop.
thnxz

Can I run a Unix shell when insert some record on a specific table?

Can I run a Unix shell when insert some record on a specific table?
I need to run a Unix shell when a record be insert on a table. Is there a way in order to do that?
THanks,
Carlos.

1. Make a backup of the extproc.c file in the c:\orant\rdbms80\extproc
directory.
2. Create a file called extern.c in the c:\orant\rdbms80\extproc directory.
The "extern.c" file :
#include <oci.h>
#define NullValue -1
#include<stdio.h>
#include<string.h>
long __declspec(dllexport) OutputString(context ,
                         path , path_ind ,
                         message , message_ind,
                         filemode , filemode_ind ,
                         len , len_ind )
char *path;
char *message;
char *filemode;
int len;
OCIExtProcContext *context;
short path_ind;
short message_ind;
short filemode_ind;
short len_ind;
FILE *file_handle;
int i ;
char str[3];
int value;
/* Check whether any parameter passing is null */
if (path_ind == OCI_IND_NULL || message_ind == OCI_IND_NULL ||
filemode_ind == OCI_IND_NULL || len_ind == OCI_IND_NULL ) {
text initial_msg = (text )"One of the Parameters Has a Null Value!!! ";
text *error_msg;
/* Allocate space for the error message text, and set it up.
We do not have to free this memory - PL/SQL will do that automatically. */
error_msg = OCIExtProcAllocCallMemory(context,
strlen(path) + strlen(initial_msg) + 1);
strcpy((char *)error_msg, (char *)initial_msg);
/*strcat((char *)error_msg, path); */
OCIExtProcRaiseExcpWithMsg(context, 20001, error_msg, 0);
/* OCIExtProcRaiseExcp(context, 6502); */
return 0;
/* Open the file for writing. */
file_handle = fopen(path, filemode);
/* Check for success. If not, raise an error. */
if (!file_handle) {
text initial_msg = (text )"Cannot Create file ";
text *error_msg ;
/* Allocate space for the error message text, and set it up.
We do not have to free this memory - PL/SQL will do that automatically. */
error_msg = OCIExtProcAllocCallMemory(context,
strlen(path) + strlen(initial_msg) + 1);
strcpy((char *)error_msg, (char *)initial_msg);
strcat((char *)error_msg, path);
OCIExtProcRaiseExcpWithMsg(context, 20001, error_msg, 0);
return 0;
i = 0;
while (i < len)
/* Read the hexadecimal value(1). */
str[0] = message;
     i++;
/* Read the hexadecimal value(2). */
str[1] = message[i];
/* Convert the first byte to the binary value. */
if (str[0] > 64 && str[0] < 71)
str[0] = str[0] - 55;
else
str[0] = str[0] - 48;
/* Convert the second byte to the binary value. */
if (str[1] > 64 && str[1] < 71)
str[1] = str[1] - 55;
else
str[1] = str[1] - 48;
/* Convert the hex value to binary (first & second byte). */
value = str[0] * 16 + str[1];
/* Write the binary data to the binary file. */
fprintf(file_handle,"%c",value);
          i++;
/* Output the string followed by a newline. */
/* fwrite(message,len,1,file_handle); */
/* Close the file. */
fclose(file_handle);
3. Use the make.bat available in the c:\orant\rdbms80\extproc directory. You
need to run vcvars32.bat file before running this batch file. This will
create a dll file.
4. Configure the tnsnames.ora and the listener.ora files.
The tnsnames.ora should contain the following entries.
extproc_connection_data.world =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = ORCL)
(CONNECT_DATA = (SID = extproc)
The listener.ora should contain the following entries.
# P:\ORANT\NET80\ADMIN\LISTENER.ORA Configuration File:p:\orant\net80\admin\listener.ora
# Generated by Oracle Net8 Assistant
LISTENER8 =
(ADDRESS = (PROTOCOL = TCP)(HOST = winnt_nsc)(PORT = 1521))
SID_LIST_LISTENER8=
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = winnt_nsc)
(SID_NAME = ORCL)
(SID_DESC =
(SID_NAME = extproc)
(PROGRAM = extproc)
5. Login from sqlplus and issue the following statements.
create library externProcedures as 'C:\orant\RDBMS80\EXTPROC\extern.dll';
Create or replace PROCEDURE OutputString(
p_Path IN VARCHAR2,
p_Message IN VARCHAR2,
p_mode in VARCHAR2,
p_NumLines IN BINARY_INTEGER) AS EXTERNAL
LIBRARY externProcedures
NAME "OutputString"
With context
PARAMETERS (CONTEXT,
p_Path STRING,
p_path INDICATOR,
p_Message STRING,
p_message INDICATOR,
p_mode STRING,
p_mode INDICATOR,
p_NumLines INT,
p_numlines INDICATOR);
This is the pl/sql block used to write the contents of the BLOB into a file.
Set serveroutput on before running it.
SQL> desc lob_tab;
Name Null? Type
C1 NUMBER
C2 BLOB
lob_tab is the table which contains the blob data.
declare
i1 blob;
len number;
my_vr raw(10000);
i2 number;
i3 number := 10000;
begin
-- get the blob locator
SELECT c2 INTO i1 FROM lob_tab WHERE c1 = 2;
-- find the length of the blob column
len := DBMS_LOB.GETLENGTH(i1);
dbms_output.put_line('Length of the Column : ' || to_char(len));
-- Read 10000 bytes at a time
i2 := 1;
if len < 10000 then
-- If the col length is < 10000
DBMS_LOB.READ(i1,len,i2,my_vr);
outputstring('p:\bfiles\ravi.bmp',rawtohex(my_vr),'wb',2*len);
-- You have to convert the data to rawtohex format. Directly sending the buffer
-- data will not work
-- That is the reason why we are sending the length as the double the size of the data read
dbms_output.put_line('Read ' || to_char(len) || 'Bytes');
else
-- If the col length is > 10000
DBMS_LOB.READ(i1,i3,i2,my_vr);
outputstring('p:\bfiles\ravi.bmp',rawtohex(my_vr),'wb',2*i3);
dbms_output.put_line('Read ' || to_char(i3) || ' Bytes ');
end if;
i2 := i2 + 10000;
while (i2 < len ) loop
-- loop till entire data is fetched
DBMS_LOB.READ(i1,i3,i2,my_vr);
dbms_output.put_line('Read ' || to_char(i3+i2-1) || ' Bytes ');
outputstring('p:\bfiles\ravi.bmp',rawtohex(my_vr),'ab',2*i3);
i2 := i2 + 10000 ;
end loop;
end;

How to insert some special Characters in a table

Similar Messages

Maybe you are looking for