How to insert the standard idoc segment in the idoc

Hi Experts!
We  are using  SRM 7.0.Wo got a requirement as below:
In our organiation there will be both regular employees and the non-employees.For non-employees address will not be maintained in Tcode PA20 in backend ECC HR  system.Where as for employees address will be maintained.
As the HR replication will be done by scheduled jobs, in case of non employees replication is not happening due to the missing address in PA20.In order to avoid this we are building some logic and as part of it we need to add the standard IDOC segment  'E1P0006' in the main idoc as this particular segment is for address and it is missing due to the missing address in PA20 for non-employees where as this idoc segment will be there for employees.
As am very much new to idoc concept can some one help me how to handle this if any one of you came across this kind of scenario.
Please find the attached document for the idoc seq we have.
Thanks in advance.
Regards,
Kalyani

1. Open the form
2. Choose Tools--> Diagnostics
3. In the block field choose $DESCRIPTIVE_FLEXFIELD$
4. Field will show the list of all the DFF's enabled for that form.
5. Choosing one will display the name of the DFF in the value field.
Thanks
Nagamohan

Similar Messages

  • Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

    Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
    Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
    Other cases:  However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
    NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
    Steps followed:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
    Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
    On the segment builder of the WebUI set any filter (Example: “TODAY”).
    Steps in detail:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
    SQ02.
    (Image deleted)
    Review Data Reading Program code (Code attached)
    (Image deleted)
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
    Create Data Source
    (Image deleted)
    Infoset: CRM_MKTTG_BP_BIRTHDATE.
    Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
    (Image deleted)
    Result:
    (Image deleted)
    Attribute List
    Creation of the Attribute List
    (Image deleted)
    Assign Data Source:
    (Image deleted)
    Selection of the Birth date as a filter in the Attribute list:
    (Image deleted)
    Result:
    (Image deleted)
    Segment builder of the WebUI:
    Access to WebUI with marketing role.
    Create Segment:
    Creation of Profile Set
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
    Result: it never return any results no matter the filter you specify.
    Other cases:
    Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
    We fill the form and select “Extraction from Query”:
    Press SAVE and define which fields will be available for selection and which of them will be visible.
    RSA3: Extractor checker in order to test the Data source:
    We specify the Data source:
    IT DOES RETURN RESULTS:
    ALV Grid:
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
    Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group.
    Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
    Define Segmentation Basis:
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
    Define Reports for Creating Segmentation Bases
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
    Define Usage for Segments:
    Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
    Attribute List:Category:
    There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
    Usage ID
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

    It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
    CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
    1966298: MGR_GUID is not populated correctly to infoset read program
    2007687:Segmentation InfoSet queries saved with incorrect Master Group
    For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
    Issue solved

  • *Urgent*How to insert data from MS SQL to the table that create at the adobe form?

    Hi,
    I'm using Adobe life cycle designer 8 to do my interactive form. I would like to ask how to insert data from MS SQL to the table that i have created in my adobe interactive form?
    I really need the information ASAP as i need to hand in my project by next week... i really appreciate any one who reply this post.
    Thanks

    Tou need to do a couple of things
    1. On the Essbase server, set up an odbc system connection to your MySQL database
    2. In the load rule , go to the file menu and select open SQL data source and in the data source put in your SQL statement . A couple of hints. Where it says Select, don't put in the word select and where it say from don't put in from. The system adds them for you. The easiest way ti enter a SQL statement is to do it all in the select area So if your SQL would normanlly say select * from mytable just enter the code as * from mytable in the select area
    The click ol/retrieve and enter in your connection info. Itshould bring data back into the load rule. Save the load rule and use it

  • My ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an u

    my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
    wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor song

    If your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
    Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
    Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use

  • Will the standard iPad case fit the the iPad Air or is there a specific type case for the iPad Air?

    Will the standard iPad case fit the the iPad Air or is there a specific type case for the iPad Air?

    The air is different dimensions from other iPads, so look for cases made specifically for it. I know that Targus has some, so does Zagg and i'm sure other manufacturers do as well.

  • Activate standard sum segment in INVOIC iDoc

    Dear experts,
    I am not sure if I am in the right board but I hope you can point me in the correct direction.
    I have to map INVOICE02 to INVOIC EDIFACT format and in the sum segments of the EDIFACT message
    I need a sum of all discounts.
    Now in WE60 I checked the INVOIC02 structure and saw that in E1EDS01, QUALF='020' I get the sum of "allowances/charges".
    But in my iDoc example I do not have an E1EDS01, QUALF='020'.
    How can I "activate" or add that standard sum segment to my INVOICE02 iDoc?
    Thank you for your help and best regarsd,
    Peter

    Hello TW Typewriter,
    thank you for your comment. Yes, other fields are populating. Yes, there are discounts given in the invoice.
    I checked one of the invoices in SAP ERP and in the head under "Conditions" I can see that there are 2 different Z-rebates and field that contains the sum of the two rebates.
    But that sum I can't find in the iDoc.
    I guess I have to sum up discounts myself implementing a user exit and looping over all the positions with possible discounts.
    Thank you again and best regards,
    Peter

  • How to insert single colon xml text in the xml table

    Dear Sir,
    how to insert special characters like single colon text example (don't) xml text in to the xml table
    please see the following example its giving me error quoted string is not ended properly
    SQL> insert into ftr_ctl values (1,
    2 xmltype('<po:root xmlns:po="http://www.oracle.com/FC.xsd"
    3 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    4 xsi:schemaLocation="http://www.oracle.com/FC.xsd
    5 http://www.oracle.com/FC.xsd">
    6 <row>
    7 <UniqueIdentifier>urn:x-gcs:def:featureType:GFDD::FT_DFDD_100565</UniqueIdentifier>
    8 <AlphaCode>ZB032</AlphaCode>
    9 <Name>Baseline Point</Name>
    10 <Status>Submitted</Status>
    11 <Definition>A location that serves as a point on, and which partially defines a segment
    of, a national boundary baseline.</Definition>
    12 <Description>May be monumented or unmonumented. A national boundary baseline is used fo
    r defining the landward edge or margin of a nation's various contiguous zones such as the 3 and 12 n
    autical mile limits and the Exclusive Economic Zone (EEZ).</Description>
    13 </row>
    14 </po:root>'));
    ERROR:
    ORA-01756: quoted string not properly terminated
    how to solve single quotation like (nation's) in xml data insertion
    please give me reply as soon as possible
    Thanks
    Kabeer

    Hi,
    Use &#x7B;code} tags to post formatted code on the forum.
    That way, your code will be more readable for everyone, and more importantly here, everyone will be able to clearly see what's bothering you :
    &apos;sThe single quote was encoded with the character entity reference "&amp;apos;".
    The conversion is not mandatory but it happens Oracle is doing it in this case.
    It shouldn't be a problem though.
    If you want to extract the value afterwards, it'll come as expected :
    SQL> create table ftr_ctl (id number, doc xmltype);
    Table created
    SQL> insert into ftr_ctl values (1,
      2  xmltype('<po:root xmlns:po="http://www.oracle.com/FC.xsd"
      3  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      4  xsi:schemaLocation="http://www.oracle.com/FC.xsd
      5  http://www.oracle.com/FC.xsd">
      6  <row>
      7  <UniqueIdentifier>urn:x-gcs:def:featureType:GFDD::FT_DFDD_100565</UniqueIdentifier>
      8  <AlphaCode>ZB032</AlphaCode>
      9  <Name>Baseline Point</Name>
    10  <Status>Submitted</Status>
    11  <Definition>A location that serves as a point on, and which partially defines a segment of, a national boundary baseline.</Definition>
    12  <Description>May be monumented or unmonumented. A national boundary baseline is used for defining the landward edge or margin of a nation''s various contiguous zones such as the 3 and 12 nautical mile limits and the Exclusive Economic Zone (EEZ).</Description>
    13  <Alias xsi:nil="true"></Alias>
    14  <SourceItemIdentifier>100565</SourceItemIdentifier>
    15  <SourceReference>DGIWG DFDD BL 2011-1.00</SourceReference>
    16  <SourceURL>https://www.dgiwg.org/FAD/fdd/view?i=100565</SourceURL>
    17  </row>
    18  </po:root>'));
    1 row inserted
    SQL> select extractvalue(doc, '/po:root/row/Description','xmlns:po="http://www.oracle.com/FC.xsd"')
      2  from ftr_ctl
      3  where id = 1
      4  ;
    EXTRACTVALUE(DOC,'/PO:ROOT/ROW/DESCRIPTION','XMLNS:PO="HTTP://WWW.ORACLE.COM/FC.
    May be monumented or unmonumented. A national boundary baseline is used for defi
    ning the landward edge or margin of a nation's various contiguous zones such as
    the 3 and 12 nautical mile limits and the Exclusive Economic Zone (EEZ).
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to assign values to extended segments in an IDoc Orders05.

    Hi All,
    I am working for an oil industry client. I have a requirement to develop a Sales order interface (I am using basic type ORDERS05). After analysing the segments and fields of this basic type, I understood I need to 2 extra custom segments (for IS oil specific fields like 'CONTACT PERSON), 'Billing block' and 'Created by' fields in HEADER & 'Excise Duty Handling type', validation type in ITEM level).
    <each segment for a Header and a Item>
    I have extended the IDoc. But I am unaware how to fill up these custom segments. I understand there are exits in 'IDOC_INPUT_ORDERS'.
    Please suggest me the steps to be considered in the exits.
    Appreciate the <removed by moderator> response.
    Thanks and Regards,
    Kbip
    Edited by: Thomas Zloch on Nov 1, 2011 10:18 AM

    Hi,
    Yes I tried this option. But I have come across this error 'No batch input data for screen SAPMV45A 8001'. This must be because the values are fed in wrong screen fields. But When I cross-checked the internal table BDC_DATA in the program before CALL TRANSACTION and the recording in SHDB separately, the screen numbers are different. I am wondering how to find the exact fields which is to be filled up.
    Note: I am creating Sales Order with reference to a Contract. Do we need to do any special treatment for this?
    Thanks

  • How to insert a dialog box which prompt the user enter the general information in the SDI application?

    Im using the SDI application to build a system and now i would like to insert a dialog box which allow the user to enter the general information about themselves and then it will be saved into a text file. How to insert the dialog box and show the dialog box at the beginning of the program.

    Hi Lee,
    The easyest way to achieve this is to declare an object of your dialog box derived class (e.g. CUserInfo, public CDialog) into the InitInstance method of the main application class.
    Depending on the behavior you want you can place the code before dispatching the commands from command line (in which case the main frame of the SDI application will not be shown), or after, in which case the UserInfo dialog box will be shown over the main application window as modal.
    The code snipped bellow can be more helpfull:
    BOOL CSDIApp::InitInstance()
    AfxEnableControlContainer();
    // Parse command line for standard shell commands, DDE, file open
    CCommandLineInfo cmdInfo;
    ParseCommandLine(cmdInfo);
    //prompt user for data
    CUserInfo dlg;
    if (dlg.DoModal() == IDOK)
    //do something here with the data
    else
    return FALSE;//i.e. quit the application if the user presses the 'Cancel' button
    // Dispatch commands specified on the command line
    if (!ProcessShellCommand(cmdInfo))
    return FALSE;
    // The one and only window has been initialized, so show and update it.
    m_pMainWnd->ShowWindow(SW_SHOW);
    m_pMainWnd->UpdateWindow();
    return TRUE;
    Hope this helps,
    Silvius
    Silvius Iancu

  • How to insert into two differents tables at the same time

    Hi
    I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
    and I want to insert into two differents tables at the same time using one view.
    How can I do that ?
    TIA
    Edgar

    Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
    1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
    2. Create an INSTEAD OF trigger on the view.
    3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
    IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
    INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
    INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
    ELSE
    IF :NEW.deptname IS NOT NULL THEN
    UPDATE dept SET deptname = :NEW.deptname
    WHERE deptno = :NEW.deptno;
    END IF;
    IF :NEW.empname IS NOT NULL THEN
    UPDATE emp SET empname = :NEW.empname
    WHERE deptno = :NEW.deptno;
    Try something along those lines.
    null

  • How can I sync the standard Outlook calendar with the "Calendar in iCloud"? I just get 2 calendars which are not synchronized.

    I am using a PC with Windows 7 and MS Office/Outlook 2007 together with the latest iCloud control panel.
    Everything seems to be fine, but the synchronization works only for the calendar "Calendar in iCloud". Which is the one coming from my iPhone.
    Which means the iCloud function is working from the iPhone.
    When I update my standard Outlook calendar "Calendar" on the PC it is not getting transferred to the "Calendar in iCloud".
    How can I "merge" them?
    I have to use the standard Outlook Calendar because it is the one connected to the Exchange server and shared among my colleagues.

    same issue, looks like nobody answered you from last JULY....

  • How to insert system date in Session of the page

    Greetings,
    I am stuck at one thing and need guidline.
    I created date parameter "From Date" - "to Date" . Item Type Date Picker.
    - Set Default Value : Sysdate;
    - Default Value Type : PL/SQL Expression.
    When i run the page it shows current date , but when i see session state report of that page there Item Value is Empty and Status is also Empty.
    The result in impact is that i created linked on data that displays, That link doesnt Work because of Item Value is Empty and Status is also Empty.
    Kindly guide how i inserted value in Item Value and in status.
    Pls

    Hi,
    >
    I am stuck at one thing and need guidline.
    I created date parameter "From Date" - "to Date" . Item Type Date Picker.
    - Set Default Value : Sysdate;
    - Default Value Type : PL/SQL Expression.
    When i run the page it shows current date , but when i see session state report of that page there Item Value is Empty and Status is also Empty.
    The result in impact is that i created linked on data that displays, That link doesnt Work because of Item Value is Empty and Status is also Empty.
    Kindly guide how i inserted value in Item Value and in status.
    >
    When you set the value of an item in the source, the value is set in the HTML DOM not the session state.
    To set value in session state use Computation or Process.
    Cheers,

  • How do you add a black segment at the end of a clip

    I would like to add a black segment at the end of my movie to lay my credits over? How is this done?
    Thanks

    Isn't there an "Over Black" in the titles pane anymore? (I don't have imovie 08...)
    Not as such. It depends on which "Title" option you are using. Double clicking on any of the last nine "Title" options in the lower area outside the text boxes will open the color selection tool. The first three "appear" to be "black" by default when "dropped" to the project area since they are actually transparent (as you can see when dropped to a video clip). Same seems to be true for "upper" area of the last nine.

  • How to insert a link of file in the form and view it at any time i need

    Hi
    I'm using developer 2000/Form designer form version 4.5
    how i can insert a link of any file Word, Excel, PDF, JPG in the form run time
    and open it from the form at any time i need
    example
    i have employ table which contain details of the employ and i want to attach a link of his photo which i already saved it in local drive
    so when i have a new employ i enter his details and brows of his photo and when i select the link of the photo will be with his other details
    and when i need to view the details of the employ just enter the emp_no and i will get details including the photo link and when i want to open the photo just double click the link
    any body can help me on this
    regards

    Hi,
    I think you should investigate in how to upload the information into the database. If the employee keeps the photo on the local drive then this isn't realy for everyone to use
    Your options are : Upload to the database as ImageItem
    Frank
    Ps.: Forms 4.5 is desupported

  • How to insert a sql query statement in the table

    I have a stored procedure which has different insert,update statements on different tables. I am writing a trigger on these tables such that when the record is updated or inserted in these tables a trigger should fire and should write the old value,new value and the query (insert or update) that caused the trigger to fire in the seperate table. Is there any way to find out the exact query statement that fired the trigger?

    Rather than inventing your own demi-donkeyed solution I recommend you consider using Oracle's Fine-Grained Auditing which does precisely this.
    Cheers, APC

Maybe you are looking for