How to Insert using QBE report in portlet?

[This is using the latest version of Portal, 9.0.2]
I have created a portlet which is based on the Report QBE.
It displays fine, with Update and Delete columns/links for each row.
However...
When I created the portlet, I specifically said I wanted to display the Query, Reset and Insert buttons in the "Customization Form Display Options" Button Options. When I click on "Customize" from the Develop tab for my portlet, it shows the full page customize, which includes these buttons. But when I add the portlet to a region, and then click on its Customize link (to the right of the portlet's navbar), the resulting customize page does NOT show these buttons.
How do I get Insert functionality working from a portlet? Do I have to do something more to make the portlet customize page show the necessary buttons?
I feel like I may be missing something obvious (again!), but I can't figure it out, and I've looked in all the places I can think of.
Help much appreciated...
Regards
Bryan

You are not 'missing something obvious' , this is how it works. The insert option is not available for qbe reports as a portlets. Reason being that you may not want all users who are able to customize the report to insert data into the base table.
For insertion of data use a form portlet or a link on one of the qbe columns.
Sunil.

Similar Messages

How to insert current_user to report?

Hi,
how to insert current_user to report (current_user is user who login to BI )
Edited by: user10236405 on Oct 24, 2008 3:11 AM

Thank Vetsrini many!
I have a problem with font when export report to PDF.
In template .rtf, I use Unicode, UTF-8, Times New Roman, VietNamese
Can you help me?

How to embed the WEBI report as portlet

I am a fresh man of WEBI.
I want to know how to embed the WEBI report to a web page as the portlet (like weblogic portal).
I have used the OpenDocument URL to do it, but the report have a tool bar on the top, status bar on the bottom and a prompt area on left. So what i want to know is how to integrate the report itself on my portal (no tool bar, no status bar and no prompt area). Is there any way to control the display of these different area?
thnaks!

Normally there is not way to deactivate the statusbar and the toolbar. What you can do is to try to capture the HTML stream using javascript and filter out the toolbar components. This can be quite complicated though since the html structure of the report is quite complicated (multiple iFrame layers). And there is no garantee that this structure will remain inchanged in the next fix pack or service pack.
A rather simpe solution could be to "cover" the toolbar with an additional opaque frame.
Regards
Stratos

How can I use a report as a filter that accepts a prompt value in R18?

In R17 the following setup worked properly. 1) have a main report that uses another report as a filter report. 2) In the filter report, add a criteria statement which is prompted. 3) pass an argument from a web link or embedded web applet on the report URL using the field reference from the filter report criteria prompt. However, in R18 this no longer works. The filter report does not bring back a set of id's that is used for filtering the main report. The main report just displays all records as if there is no filter criteria supplied. Has anyone else encountered this behavior in R18?

I'm trying to figure out how I can use a simple class
I have written with methods and properties in Sutdio
Creator.
I have been looking around, but I've only found how
to use an EJB directly from Creator. We would like to
use a bean that handles all the connections to the
app server and only returns the result to the JSP.
I know there has to be a way to do this, if anybody
has any ideas please help!I'm not sure I follow 100%, but you can use POJOs via Spring integration. Do a search on this forum for Spring and you should find a tutorial I wrote on it a while back.

How can I use XL report to extract data in Fixed Assets module?

Can user use XL Reporter to develop reports on Fixed Assets data such as FA Master Data? In another word, can XL
Reporter be used on FA module? If so, how can this be done?

Hi
As there is no reports available for Fixed Asset Module, u have to develop by taking tech help.
Or else u can use crystal reporter instead.
Regards,
Kashi

How to insert "%" into the report figure in report painter/ drill down

Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report.
Thank you
Sirirak

Hi,
Create a text variable (for query name, option available in query properties).
Processing Type would be Replacement path, replace with variable.
Give the variable name created for the selection box characteristic in 'Replace with variable' option.
This would replace value of the text variable with the user input value.
Hope this helps!

How can I use the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL

Dear all,
I want to change the CRM organization from stardard version to enhanced version.Acoording to the help document, we must using the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL.But neither this transaction code nor this program in CRM system.Do you have any suggestion, Thank you very much.
The help document is "http://help.sap.com/saphelp_crm60/helpdata/en/32/4473211b7778428efebc865e351cb4/content.htm"

Hi
Please check if you do have the authorization for transaction
CRMC_SWITCH_ORGMODEL.
Transaction CRMC_SWITCH_ORGMODEL switches the organizational
structure being used in CRM to a new model. This process is irreversible
and therefore an accidental execution of the transaction should be
avoided. This may be the reason why you can not execute the report.
For further details review note 0635401 and the check if following notes
are valid for you.
650001,635339,635182
Hope it can help you.
Best Regards,
ZhaoJie

How to insert Group into Report Footer or have two Groups in same level

Hi,
I am wondering whether it is possible to have two indepent groups---they are at the same level, in one report.
I tried insert a group into Footer section or just insert two unnested groups in Group Section, but seems undoable.
Thank you for your help!

My suggestion will work. The basic layout would be:
G1Ha - printed when grouping field = 1 (your "Group header #1" above)
G1Hb - printed when grouping field = 2 (your "Group Header #2 above)
Da - printed when grouping field = 1 (your "AccountNumber1 Account Name1" under group header 1)
Db - printed when grouping field = 2 (your "Subreport for AccountNumber1 under group header 2)
G1Fa - printed when grouping field = 1 (your "Group Footer #1 above)
G1Fb - printed when grouping field = 2 (your "Group Footer #2 above).
Since the grouping field is the primary grouping, the order that the formats will display is:
G1Ha
Da
Da
Da
G1Fa
G1Hb
Db
Db
Db
G1Fb
matching your example perfectly.
HTH,
Carl

How to make use of report - RPDLGA20 - Wagetype Usage report?

Hi,
Your replies will be highly appreciated.
I wanted to use report - PRDLGA20 ( Wagetype usage )
For suppose to check for the Wagetype which processing class has been set up etc,.
When I ran this report, and click on "Processing class and their values" , I do see list of classes & their specifications but I do not see any indication/mark against the specification defined against the selected Wagetypes. Like wise it is with other results as well.. ( Evaluation class, Cumulation etc.,)Do we need to activate this report by some means so that it will pull out the selected Wagetype configuration details in report rather than listing out whats there in SPRO?
Thanks for your reply.
Rgds
Peddi

Hi Raja,
1) Mention the fields that you wish from database table (incase you don't need all the fields from the database table).
2) Don't use the INTO CORRESPONDING FIELDS OF TABLE ztable clause.
3)Instead use INTO TABLE ztable (But take care that during the declaration of the ztable, the fields declared are in order that in database table to fetch the Records in sequence).
Please Find the Syntax and Code Below..
SELECT * FROM <TABLE>
WHERE <WHERE>
%_HINTS ORACLE 'INDEX("<TABLE>~<INDEX ID")'.
SELECT carrid
INTO TABLE t_spfli
FROM spfli
WHERE carrud IN s_carrid AND
connid IN s_connid
%_HINTS ORACLE 'INDEX("&SPFLI&" "SPFLI~XXX")'.
Hope this Is helpFul
Thanks
kalyan

How can I use Embeddable Report Designer Control

Hi, I found that there is an Embeddable Report Designer Control (CRAXDDRT) which end user could open and edit report runtime (rpt file)
would you please help me use this control in c#.net
I have Crystal report 2008
thank you

You can not use that in .NET and also there is no craxddrt in CR 2008 as there is no COM SDK for CR 2008.
Currently there is no .NET equivalent to that dll.
Jason

HOw can i use crystal reports

Dear All,
I am PS / CO consultant, i want to know how can crystal report tool helps me in defining different reports for the clients. Kindly explain what is crystal report tool. its function and other attributes.
regards
Saqib

Hi Saqib, I suggest you search our sites and PS's site for more info. You also ahve to option to take a Report Design course. What you are asking is to general.
Don

Using a LOV in an Update page for a QBE Report

In my QBE Report-based portlet, I have set one of the fields to use a LOV.
When I go into Customize for the portlet, that field uses the LOV, but when I click on the Update link for a row, the same field does NOT use the LOV.
How do I make it use the LOV in the Update page?
Thanks for any help!
Regards
Bryan

Folks --
Is this question a difficult one?
I'd appreciate even a pointer...
Thanks
Bryan

How to use Jasper Reports in Apex to print PDF

I new and would like a know how as to use jasper reports to print PDF's

Thanks for the appreciation :).
If you have any new feature requests, just let me know: [ https://www.opal-consulting.de/forums ]
Cheers,
Dietmar.
blog: [ http://daust.blogspot.com ] JDD-Spreadsheet-Suite: [ http://jdd-software.com ]
JasperReportsIntegration: [ http://www.opal-consulting.de/tools ] [ https://www.opal-consulting.de/forums ]

How to insert BLOB datatype image using PL/SQL Procedure and SQL Loader

Hi,
How to insert an image into database using PL/SQL Procedure and also how to insert using SQL Loader. Please help by giving sample code and process description.
Thanks,
Vijay V

http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:232814159006

How to use didcoverer reports with EBS 11i

hi all
how can we use dicoverer reports with 11i
how to register them,run them from 11i.
and where are these reports stored.like if i created a open periods report that shows all the open periods in AR,AP modules,where do i need to place these reports to run from applications 11i.
i never used discoverer,i am just asking these questions assuming discoverer reports work similar to that of reports 6i
thanks in advance

Discoverer can be called from Oracle Apps or more usually from it's own XML version (Plus) or from it's own HTML version (Viewer).
Discoverer reports (workbooks) are created with a client / server version (desktop) or the XML version (Plus).
Once a workbook has been written it is possible to call it directly from Apps, but again, it's more usual to firing up Discoverer directly and going from there.
Russ

How to Insert using QBE report in portlet?

Similar Messages

Maybe you are looking for