How to inspect the detail of NI-FBUS Configurat​or error
Now, I am developing an HSE device, and testing by NI Configurator.
Some parameter newly defined within HSE FBs has an longer length than H1's FMS limitation 246 byte.
The DD file looks being created successfully, because NI Configurator is showing the parameter as an collect length (1024).
Then, NIFCONF_ERR_DD_SIZE_MISMATCH - Actual data size dows not match the DD data size (-1000) is reported.
And the HSE packet is correct.
I have to inspect what error NI Configurator has actually detected.
Please can someone give some information how to inspect the detail of error in NI Configurator ?
Hi Washiro,
Would you please give more detailed information about the parameters? I have 2 questions:
1. What are the types of the newly defined HSE FB parameters as you mentioned?
2. Which version of Fieldbus specification are these types of parameters defined in?
Similar Messages
-
How to show the detail information of web dynpro runtime error
hi,
I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
But when i do the same on server-2,there just show something like:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version, i have setup the 'developmode' value is 'true' in VA)
Edited by: BingLin Zhong on Feb 18, 2008 2:22 AMFollow SAP note - Note 962319 - Detailed error messages with stack trace in Web Dynpro
Thanks,
Praveen
PS.Dont forget to reward points -
How to track the details of the user?
Hello,
I want to know how to track the details of a USER from the past 60 days I mean i want to know how what is the time and time out of the SAP system for the past 60 days?
waiting for the valuable replys.
ThksRead,
http://help.sap.com/saphelp_nw04s/helpdata/en/2c/c59d37d373243de10000009b38f8cf/frameset.htm
regards
Juan -
SAP Cloud Application Studio How to retrieve the details based on OVS in Product ID
Hi Experts,
I have small requirements in AdvanceListPanel. I have custom BO as mention below,
businessObject Demo {
element ID : ID;
node Sporoduct [0,n] {
element P_ID : ProductID;
element P_DES : SHORT_Description;
element P_QTY : Quantity;
element P_NET : Amount;
I have attached the OVS on Product ID (P_ID) element.
I want to auto-fill the details under the AdvanceListPanel ( Product Desc , Product Net value ( Price) )
1) How to get the details of Product ( Prod Descr, Product Price etc ).
Please anyone have idea about this share your thoughts.
Many Thanks,
MithunHi, Mithun
What you want is to auto-fill the related details when you select a product from your OVS.
That means you have to write your codes in Event After Modify.
We normally use QueryByElements or some other query options given for a particular standard BO.
It would be like that.
var query=Product.QueryByElements;
var selParams=query.CreateSelectionParams();
selParams.Add(query.ProductID ,"I","EQ",this.P_ID );
var result=query.Execute(selParams);
for(var product in result){
this.P_DES =product.Description;
What I have just written is just a sample code. You have to find the exact name of the attributes of a standard BO in Repository Explorer.
Hope this helps,
Fred. -
How to extract the details of the stored procedures in the database?
Dear all,
How to extract the details of them?
Bst Rgds,
EdwardHi Wa-Man Edward Chan,
Following is the PLSQL Block Which Will Give Package, Procedure, Function Source
set verify off
undefine which_object;
undefine which_line;
declare
Shows lines with context of:
VIEW
FUNCTION
PROCEDURE
TRIGGER
PACKAGE SPECIFICATION
PACKAGE BODY
The script uses to temporary tables ERROR_TABLE_TEMP and ERROR_CLOB_TEMP created with:
CREATE GLOBAL TEMPORARY TABLE ERROR_TABLE_TEMP(line number, text varchar2(4000));
CREATE GLOBAL TEMPORARY TABLE ERROR_CLOB_TEMP(TEXT CLOB);
v_offset number:= 5; -- Controls how many lines before and after the line in focus are to be shown
v_obj_name varchar2(100);
v_obj_type varchar2(100);
v_obj_type_new varchar2(100);
v_obj_line number;
v_counter number := 0;
v_text varchar2(32767);
v_subtext varchar2(1000);
v_from number;
v_len number;
v_marker varchar2(10);
v_found number;
v_line_from number;
v_line_to number;
v_long_text clob;
procedure ins_line (p_text in varchar2) is
begin
v_counter := v_counter + 1;
insert into error_table_temp(line,text)
values (v_counter,p_text);
end;
begin
delete error_table_temp;
select ltrim(rtrim(upper('&which_object'))), nvl(to_number('&which_line'),0)
into v_obj_name, v_obj_line
from dual;
begin
select decode(object_type,'PACKAGE','PACKAGE BODY',object_type)
into v_obj_type
from user_objects
where object_name = v_obj_name
and nvl(v_obj_line,0) > 0
and rownum = 1;
exception when no_data_found then
ins_line('ERROR: Object/line not found');
return;
end;
ins_line(v_obj_name||' ('||v_obj_type||')');
if v_obj_type in ('PACKAGE BODY','PACKAGE','FUNCTION','PROCEDURE') then
v_obj_type_new := v_obj_type;
ins_line('----------------------- PROGRAM LISTING -------------------------');
for code in (select trim(text) text, lpad(line,4,' ')||' '||decode(line,v_obj_line,'>>>>> ',' ') marker, type
from user_source
where name = v_obj_name
and line between v_obj_line-v_offset and v_obj_line+v_offset
order by decode(type,v_obj_type,1,2),line) loop
if v_obj_type_new != code.type then
ins_line(null);
v_obj_type_new := code.type;
v_counter := -100000; -- In order to show specification before body
ins_line(v_obj_name||' ('||v_obj_type_new||')');
ins_line('----------------------- PROGRAM LISTING -------------------------');
end if;
ins_line(code.marker||code.text);
end loop;
elsif v_obj_type = 'VIEW' then
select text
into v_text
from user_views
where view_name = v_obj_name;
v_line_from := v_obj_line-v_offset;
v_line_to := v_obj_line+v_offset;
v_obj_line := v_obj_line -1;
ins_line('------------------------------- PROGRAM LISTING -------------------------------');
for i in v_line_from..v_line_to loop
begin
if i = v_obj_line then
v_marker := '>>>>> ';
else
v_marker := ' ';
end if;
if i = 0 then
v_from := 0;
v_len := instr(v_text,chr(10));
else
v_from := instr(v_text,chr(10),1,i);
v_len := instr(v_text,chr(10),1,i+1) - v_from;
end if;
v_subtext := substr(v_text,v_from+1,v_len-1);
if v_len > 0 then
ins_line(lpad(to_char(i+1),4,' ')||' '||v_marker||v_subtext);
end if;
exception when others then
null;
end;
end loop;
elsif v_obj_type = 'TRIGGER' then
ins_line('----------------------- PROGRAM LISTING -------------------------');
delete error_clob_temp;
execute immediate 'insert into error_clob_temp (text) '||
'select to_lob(trigger_body) '||
'from user_triggers ' ||
'where trigger_name = '''||v_obj_name||'''';
select text
into v_long_text
from error_clob_temp;
v_obj_line := v_obj_line-1;
v_line_from := v_obj_line-v_offset;
v_line_to := v_obj_line+v_offset;
for i in v_line_from..v_line_to loop
begin
if i = v_obj_line then
v_marker := '>>>>> ';
else
v_marker := ' ';
end if;
if i = 0 then
v_from := 0;
v_len := dbms_lob.instr(v_long_text,chr(10));
else
v_from := dbms_lob.instr(v_long_text,chr(10),1,i);
v_len := dbms_lob.instr(v_long_text,chr(10),1,i+1) - v_from;
end if;
v_subtext := dbms_lob.substr(v_long_text,v_len-1,v_from+1);
if v_len > 0 then
ins_line(lpad(to_char(i+1),4,' ')||' '||v_marker||v_subtext);
end if;
exception when others then
null;
end;
end loop;
end if;
if v_counter = 0 then
ins_line('*********** NO CODE FOUND ***********');
else
ins_line(null);
end if;
exception when others then
ins_line('*********** ERROR: NOT POSSIBLE TO SHOW THE CODE ***********');
ins_line(' FEJL: '||sqlerrm);
end;
set linesize 4000
set heading off
set feedback off
set verify on
select text
from error_table_temp
order by line;
set linesize 80
set heading on
set feedback on
Prashant -
How to fill the details tab in tv shows with description
Can anyone tell how to fill out the details tab metadata in the tv shows section of iPad? The tv shows purchased from the iTunes Store have the details tab beside the episodes tab filled in with helpful description about the show. Isn't there a way to do that manually for personally downloaded tv shows? It's not possible to buy every content from the iTunes Store. Please help if anyone know how to add description to tv show details.
see your duplicate thread : How to fill the details tab in the iPad tv shows with description
-
I have one file ss_fpga.rbt,abcd.txt how to know the details of the file
i have one file ss_fpga.rbt,abcd.txt how to know the details of the file (when was the date created ,when was date modfied,owner) any function is there like GetFileInfo
Yes there is some, called stat(), look the links in your post in stack overflow, there is a lot of link in the anser.
They talk about sys/stat.h a C header, witch contain the stat() function.
stat() return a lot of things (size, changes, access etc) about files. look the "here" everywhere in the Yann anser, UP his anser and put the subject as resolved.
Thanks, -
How to display the details of particular order when click on button in sapui5
Hi Experts,
How to display the details of particular order when click on button in sapui5?
I Have a requirement that is i want display all the list of orders coming from backend as shown in image below
then in that i have a button when i press the button it need to display the details of particular order as shown in image below
Please help me .
Thanks & Regards
chittiDoes anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie -
Please let me know how to see the details related to the Key figure used
Hi,
Basic key figure BHSL-I belonging to the table GLPCT is used in the one of the reports created using the Report Painter.
Please let me know how to see the details of the BHSL-I key figure.
Details I am looking for is, how the field BHSL-I is getting populated I mean from which field/fields combinations and what is the formulae involved in the calculation of the key figure.
Please let me know if any documentation exists about the key figures.
Thanks in Advance.
Madhuri.What model year is it? If older than a 2011 model, and even some early 2011 models, you will need the original install discs that came with it.
If older than a 2011 model then you use the Online Internet Recovery system to erase the drive, format it Mac Extended and then reinstall OS X.
To access that online recovery system at startup hold down the Command + Option/Alt + r key and keep them held down until you see a globe on the screen. -
How to see the details of archived vendor account?
Hi,
User want to see the detail line items of a vendor account for year 2002. As it has been archived, we are able to see the balances only but not the details. Can anyone please let me know, how to see the details for an archived data.
Quick response will be appreciated.
Thanks & RegardsHello,
Use t.code SARI for archived line items
give archiving object MM_EKKO and archiving infrostructure SAP_DRB_MM_EKKO and execute
you will get other screen and fill the necessary fileds and execute.
regards
kumar. -
how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help pleaseThanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[ 8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[ 8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[ 8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ... -
How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
Aditya MedirattaHi,
Please try the steps mentioned below and check if it helps:
Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
Right click on outlook.exe and click on Properties and then click on
Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
Note: If you are using 64 bit computer then the file location of the file will be
Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
Best Regards. -
How to get the details of Transports which are yet to be imported
Hi Experts,
Kindly let me know how to get the Transport request details which were not yet imported.
For example:
We have two client in development system 300 and 400, The transports which are created in 300 and imported to 400 (in SCC1).
I need to know the details of transport requests related to 300 which are yet be to moved to 400.
Where can i get these details.
Thanks,
Narasimhan KrishnaNarasimhan,
Take a closer look at Yves KERVADEC's approach. The issue here is that typically SCC1 is used to move transports which have not yet been closed. You can see the details of any transport via se01/se09/se10, whether open or closed, but my interpretation of your question is that the customer wants to know which transports have been imported into the unit test client (400) via SCC1, which transports have been brought in by the transport system (after they were closed), and which transports have not yet been sent to either the unit test or QA system (i.e. are still open).
My guess is that you are trying to track down why things work in the unit test client and not in the QA client. That is actually a different question with a different approach, but if that's what you really want to answer, go ahead and ask that question in a separate thread and you'll get a ton of techniques.
Back to the question you actually asked: By writing a query, you can get a list of transports which have been brought in to the unit test client via SCC1. You can also get this information from SCC1 --> Goto --> Log Display. Then click All Transport Requests and doubleclick on the client. This will give you the import log of your unit test client with date/time stamp. Analysis of that data indicates to me that perhaps you may want to look at CC0_RSCCPROT03_ALV, but I'm not an ABAPer so the previously mentioned tables are probably better.
Anyway, once you have a list of transports which have been imported, you can subtract out the ones that have been closed and transported downstream (and back into the unit test client.. your transport path does re-import the final version of the transports into the unit test client... right?). You can get that information from another query or you can get the list from STMS as suggested by Aparajit Banik.Then you'll have a list of transports which have been imported into the unit test client via SCC1 but have not yet been released and made it downstream. This will give you a "hit list" of transports which might be causing a mismatch between your unit test and QAS clients. You would then inspect them more closely with SE09/SE10/SE01 (I prefer se01, but different folks prefer different version of the transaction).
Again, there are better ways to deal with client mismatches, but I'm answering the question you asked in case I misunderstood the underlying subtext.
I hope this helps!
Best regards,
--Tom -
How to read the details in the context node of the custom controller
Hi friends,
My requirement is i enhanced the component ICCMP_BP_DETAILS , now on EH_ONSAVE i want to read the details of the Context node in the Custom COntroller .
In custom controller from ICCMP_BP_DETAIL/CuCoBPDuplicate From this in context node CUSTOMER is there in that attributes first name last name is there i want to read those details
so can u pls provide the logic for this how can i get the values.
am very new to the BSP programming
Regards
YogeshHi Suchitha,
when i am following the above code the lr_entity is not Bound, so can u pls suggest is there any thing is missing
i used the below mention code but lr_entity is not bound
DATA: lr_cuco type ref to CL_ICCMP_BP_CUCOBPDUPLICA_IMPL.
lr_entity type ref to cl_crm_bol_entity.
lr_cuco ?= me->get_custom_controller( 'ICCMP_BP_DETAIL/CuCoBPDuplicate') .
CHECK lr_cuco IS BOUND.
lr_entity ?= lr_cuco->typed_context->customer->collection_wrapper->get_current( ) .
CHECK lr_entity IS BOUND .
lr_entityIF_BOL_BO_PROPERTY_ACCESSGET_PROPERTY_AS_VALUE( iv_attibute = 'FIRST_NAME' ev_attribute = lv_firstname ) .
Please correct the code if any thing is missing
Regards,
Yogesh -
How to call the 'DETAIL' function in ALV for a program?
Dear Friends,
I have a prf_tree (TYPE REF TO cl_gui_alv_tree), and I added below codes to add an new button for displaying the detail record, it works fine:
CALL METHOD prf_toolbar->add_button
EXPORTING
fcode = prf_tree->mc_fc_detail
icon = icon_detail
butn_type = cntb_btype_button
text = ''
quickinfo = 'Show Details'.
Everytime I click this new button, a window will popup and display the record details.
My question is: how to call this standard function ('DETAIL' function) in a program? for example:
CASE ldf_ok_code.
WHEN gcf_okcode_save.
PERFORM okcode_save.
WHEN 'SHOW_DETAIL'.
CHECK gdf_nodkey_9003 IS NOT INITIAL.
PERFORM SHOW_DETAIL.(How to write this code to display the detail data of the selected record?)
Thanks a lot!Hi,
Go for Interactive Reporting
like When u click on the output then it will show the Detail report u want .
for that purpose Pls
Use Hide command .
And call another report
by using SUBMITT Program
Maybe you are looking for
-
Question over the appraisal status change
Dear All, Our appraisal has ( following the flexible template ) has planning, mid year review and final phases. With in each main status we have sub status configured. Example - In the planning stage ( say in the month of February ) , employee add ob
-
Firefox locks up when it is opened
turned on the computer last week and when I opened firefox an update quickly flashed before it opened. Then when it opened the firefox update page and my yahoo page were on separate tabs. It prompted me to continue a session or end it. At this point
-
How to change the Short text of a GUI Status .
Hi Guys , Can any one guide me on how to change the short text of an already existing GUI Status . I have already tried doing these :Opened the GUI Status in change mode and changed the short texts of the Application tool bar ,
-
Re: Download Toshiba Bulletin Board for Windows 8
My wife has a Satellite L870-18V running Windows 8. She has noticed me using my Bulletin Board on my rather older Toshiba Satellite L650-12Q (with Windows 7) and wants one! Is it possible to download Bulletin Board to her computer, as it is not pre-l
-
I just want to install greasemonkey...keep getting the 203 error code