How to install captivate 8?

Hello,
I began the process of downloading the annual subscription for Captivate 8. Before I could complete the download, I needed do another task. Now I am unable to locate the download for this product.

Moving this discussion to the Adobe Captivate forum.
Michellew79883629 have you downloaded the installation files from your account at http://www.adobe.com/? You can find additional details at Find a download link on Adobe.com.

Similar Messages

How to install eLearning Suite silently without the license agreement prompt

I was able to install the eLearning Suite 1.0 by following the guideline "How to install Captivate Silently". I used the "setup --mode=silent --deploymentFile=install.xml" method, and that worked except one thing. Adobe Air prompted for a License Agreement, and I also got a demo screen pop up. How do I supress these two pop ups when using the silent mode setup? I know how to do this for Captivate, but folder structures are different in eLearning Suite.
Thanks.

Bob,
Let me know if this summary is correct:
1. If possible allways let Vista install apps in default directories.
2. Adobe apps and their newer versions are by default installed in new directories (except for Acrobat). For example CS4 MC would be installed as a completely seperate entity from CS 3 MC. Another example, eLearning Suite 4 would be installed as a completely seperate entity from CS 3 MC. Therefore all settings in each newly installed application need to be set up. Does each application then have its own unique data directory structure?
3. Since each Suite is a separate entity each license is seperate. This avoids cross license issues between different Suites.
4. If a user allways wants the same (latest) version of an application to load then one must manually uninstall old versions in the other Suites.
For example, as a default install eLearning Suite 4 would be a completely seperate entity from CS 3 MC. The user would then delete the following older CS3 applications (as the newer versions are in eLearning Suite 4):
Photoshop CS3 Extended
Flash CS3 Professional
Dreamweaver CS3
Soundbooth CS3
Except for Acrobat as the default install would have updated the CS3 version.

How to install Adobe Captivate 7

I have Adobe Captivate 7 and need to know how to downlaod it. It is very complex and goes through a site called identit-e and I cannot find directions on how to install this product. any help would be great. thanks!

Hi C.torres5,
Welcome to Adobe Forums.
Please use the below direct link to download Captivate 7.
http://prodesigntools.com/adobe-captivate-7-free-trial-direct-download-links.html
Please make sure to complete the very important instructions prior to clicking on the link.
Thanks

How to install TTS to Captivate 7?

Hello,
I recently successfully installed Captivate 7. (I had to uninstall it and reinstall it due to a problem.) I then downloaded Neospeech 32-bit Voices for Captivate 7 to my Downloads folder. I unzipped the file within my downloads folder and ran the executive file as administrator. I restarted the computer, and the voices are still not within in Captivate. Any tips?
And wouldnt it be easier if Captivate just included them in the software to begin with?

Do you see the VT folder in the Program Files folder - C:\Program Files (x86)\Adobe Captivate Voices 7 ?
If you see that, rename or clear the Preferences folder and launch Captivate as an administrator. You should see the voices in the Captivate.
If you don't have the VT folder, then restart your computer and reinstall NeoSpeech. This should work.
Sreekanth

Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

Hi,
I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
Thank you!
Michele

Yea it works in XP mode
Daniel Wooden
Systems
U.S. District Court Middle District of Tennessee
615-736-7485
From:   RodWard <[email protected]>
To:     DEW45 <[email protected]>
Date:   09/24/2011 12:01 AM
Subject:        Install Captivate 4 on Windows 7 64-bit
machine with Windows XP mode?
Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
created by RodWard in Adobe Captivate - View the full discussion
Try running Cp4 in WinXp compatibility mode on Win7. Also make sure
you're set to Run as Administrator.
I run Cp4 on Win7 without issues. But other users report similar problems
to yourself. In the end, it may or may not work for you because Adobe has
never claimed Cp4 was compatible with Vista or Win7 64bit.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3935593#3935593]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Installing Captivate 8 on an external hard drive?

Is it possible to install Captivate 8 and supporting files on an external hard drive so that I can use it on different computers, such as library or school labs, so I can create screen capture or tutorial scripts with their system without having to install the program on their computers? For instance, I work at a family history center and want to create tutorials that show exactly how the exclusive programs and websites work in center's system, but don't want to leave my program on their system permanently. I also want to complete the tutorials without having to take the time to do the installation or wait for tech staff to install the program when I am visiting other family history repositories or learning institutions.

Install a trial download of Captivate 8 on their system. The do all the captures you need. Transfer the CPTX files to your own PC and finish off there. It shouldn't be a problem. You cannot finish files on their system with the trial version because the output will stop working after 30 days. So you just need to make sure you finish the files on your own system and be careful to turn off the 30 day expiry in Preferences.

Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

check your computer or, if you don't know how to search for files, redownlload:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Can't install Captivate Voices 8 on Mac

I downloaded and installed Captivate 8 on my Mac, but I can't seem to install the NeoSpeech Voices add on. I've downloaded the .dmg installer I couple of different times, and started the install, but everytime it only gets to 2% installation, and then says Installation Failed. When I look at the error summary it says:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS003 ...
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
----------- Payload: Adobe Captivate Voices 8 8.0.0.0 {705AEB02-D616-11E3-BB79-FD781545644A} -----------
FATAL: DS003: Installer package might be corrupt. Re-download the installer and try again. (Cannot extract '/Volumes/Captivate Voices 8 1/NeoSpeech Voices/payloads/CaptivateVoicesContent/CaptivateVoicesContent.zip' to '/Library/Application Support/Adobe/Installers/adobeTemp/{705AEB02-D616-11E3-BB79-FD781545644A}'. Error: )
So like I said I downloaded the installer 3 separate times and tried again, but same thing.
Is there a work-around or a way to get a .dmg installer that works?

See if the following leads to a solution
Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

How to install this adobe photoshops elements

how to install adobe photoshops elements in mac computer

download the installation file and install using your serial number.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to deploying Captivate 8 on sccm?

How to package Captivate 8 for sccm deploy?

<moved from Downloading, Installing, Setting Up to Adobe Captivate>

How to install Loquendo Voices

Downloaded and have the trial CP6 running on a PC.
I downloaded the Loquendo STT voices, but do not know how to install them. The downloaded file ends in .dmg
Only one file was downloaded. Is there an installer file that must be used and where do I find it?
Thanks,
Dave

Indeed, as Sreekanth points out, you need full administration rights for any installation. But 'Run as Administrator' for Captivate only needs limited rights for Captivate, which is not full administrator rights. Just wanted to clarify.

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to install captivate 8?

Similar Messages

Maybe you are looking for