How to install iWork after installing the iOS7

How to install iWork after installing the iOS7.

Oh, but it is since you have already erase the volume. What more do you wish to do? If you want to do an online Internet Recovery and your computer is able to do so, then do this:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Similar Messages

  • Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Be sure you have prepared the new drive correctly:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • HT4623 i purchased an iphone 5 from UAE & after setting up everything i can't see the facetime icon in setting. please advise on how to install the facetime.

    I purchased an iphone 5 from UAE & after setting up everything i can't see the facetime icon in setting. please advise on how to install the facetime.

    i bought it from UAE but not using it there. i am in Kurdistan at the moment &  installed the Kurdistan local sim in it.
    I can see the facetime here on other Iphone 4s which working perfectly without any issues but couldnt find the reason for the Iphone 5.

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • How to install the same copy of creative suite on the second computer?

    Basically I am using a Macbook Pro and upgraded my hard disk. A
    After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

    Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • How to install the SAP Java Connector

    Hi,
    I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
    ===
    u2022 Copy the librfccm library and the libsapjcorfc library to busines
    sobjects_root/enterprise120/PLATFORM_PATH, where busines
    sobjects_root is the full path to your businessobjects directory,
    and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
    is solaris_sparc for an installation on Solaris.
    u2022 Use symbolic links for the location of the librfccm library and the lib
    sapjcorfc library.
    u2022 Add the location of the librfccm library and the libsapjcorfc library
    to the library path.
    ===
    Do I have to do all 3 steps or is the 1st one (copying of files) enough?
    On the other hand, the SAP Java Connector guide says:
    ===
    Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
    Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
    ===
    So, what to do?
    Thanks!

    Thanks for your help. So i copied the 2 files as mentioned in point 1.
    Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
    I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
    I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
    Thanks again!
    Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

  • How to install the CMS

    Hi i am trying to create track
    i installed Netweaver 7.0 with SP14. 
    I configured the sld and its working fine
    now i am in the stage to create the Track for development.
    In the process of crating the track its asking the CMS URL and User Id and Password.
    Please let meknow
    1 .how to install the CMS server and ?
    2. What is the URL and UID /Password.
    3. I am not able to see the NWDI roles in my server
    Please let me know how to achive that.
    Thanks
    MMukesh

    Hi,
    See It depends upon your landscape..
    If you want to transfer the Dev to Quality..
    --The basis team should create the all respective track..
    --After activating your Objects in IR ,ID  you will get another option in change list there you have to rclick and click on transport automatically transfered to QA..
    The other way is through file you can transfer..export ,import... options..
    -- this is you have to export the objects by SWCV or namesapce wise .. the all object will be stored under one path in server .. next you have to prepare the excel sheet you objects ..then the basis team will transfer the tpz file to qa and there it will be imported..
    Please see the CMS transfer links..
    Please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
    Where can I get installation files of DTR, CBS, and CMS?
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
    'How ToTransport XI Content Using CMS'.
    /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    Regards
    Chilla..

  • How to install the B1iP for 2007.

    Hi, all
    Does anyone know how to install the B1iP for 2007.
    I tried but this message was occured.
    "new:
    127.0.0.1"\SBO_SHR\B1is\apps\PaymentEngine Neither share folder "B1_SHR" nor "SBO_SHR" exist!"
    Acctualy there is no such folder.
    Should I create the folder by myself?

    Hello Erika and Moutain,
    Please kindly make sure B1iP is installed in the B1 Server machine. If it is B1 Server, suppose there should be a shared forlder created: B1_SHR or SBO_SHR after B1 Server Installation.  B1_SHR or SBO_SHR folder is used to store the client instllation, online help files and working folder for the PaymentEngine in B1 2007 A PL. The error message occurrs during the PaymentEngine B1iApplication instllation. But since B1 2007 A PL 38(including PL38), this error message should be not there anymore. So if you are working with the version earlier than 2007 A PL38, please upgrade the latest version PL39. By the way, of course you can create the shared folder (B1_SHR) and share it by mannual, but it should be created by B1 Server installation. Thanks.
    Kind Regards
    -Yatsea

  • HT1481 All the software in my ipod nano 4th generation got deleted by some virus protection software of my computer. How to install the softwares in my ipod?

    All the software in my ipod nano 4th generation got deleted by some virus protection software of my computer. How to install the softwares in my ipod?

    iTune says installation complete and then start looking for iPod and then again suggests to reinstall the programs. I do not see any display on the iPod
    What is the exact error message iTunes is giving you after you restore it?
    B-rock

  • How to install the Thai2Unicode Script, I have tried, but failed. The Thai song is can't read because it shows in unread letters.

    how to install the Thai2Unicode Script, I have tried, but failed. The Thai song is can't read because it shows in unread letters.

    Hey brightness,
    Thanks for the question. After reviewing your post, it sounds like you can't install or uninstall QuickTime. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • 2700 classic / how to install the nokia/ovi maps s...

    Hello
    i figured that some nokia 2700 come with map software (i know it dont have gps) ,but you browse offline .mine dont have it but i saw it had the folders for the maps.
    when i go to http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download it says my phone has already installed the software ,with the nokia pc suite i can donwload and install maps for various countries but not the software to view them.
    any ideas how to install the nokia maps for this phone?

    i have the same problem after updating its program i even cannot download maps

  • How to install the JDI  and what re the prerequisites

    Hi All,
    Anybody tell me ,
    AS iam new to the SAP NetWeaver
    How to install the JDI,
    I have got one document in  sdn . It has given the prerequisite as.
    Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
    Should i install all the above component?  or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
    How i need to setup the JDI.
    We are working on Webdynpro, and VC, some of the portal components development.
    Installing the DTR alone is enough to move forward, or JDI is required to  setup?
    Please repsond me.
    Regards
    Vijay

    Hi Krishna thanks for the reply,
    Our Current  Portal Version is
    NetWeaver 2004s SP 11.
    My question, should we need to install all these following components before we setup the JDI.
    Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
    or
    As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
    BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
    Can u tell me where i will get that service packs in the service market place.
    Regards
    Vijay

  • I have the iphone 4s, when i installed the ios7 my wifi and BT i nost working, the wifi is in gray and i could no switch on. any solution?

    have the iphone 4s, when i installed the ios7 my wifi and BT i nost working, the wifi is in gray and i could no switch on. any solution?

    http://support.apple.com/kb/TS1559

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

Maybe you are looking for