How to install os x Server Tiger

i'm very new to mac's, so this is my problem. please explain for a very first timer, thanks. i bought a g5 dual from craig's list it had tiger server on it so i purchased os x tiger server. Reformatted it. how do i set up 80 gig hd for running my music Protools and programs,and use the server to swap files over the internet. do i have to purchased a regular tiger operating system can i do this all on one computer. i also have a macbook pro intel os x Leporad

Hi dhitz, and a warm welcome to the forums!
Just to mention, you may have better luck posting this in the Sever area...
http://discussions.apple.com/category.jspa?categoryID=96
One of the bottom Tiger/10.4 ones!
As I understand it Server doesn't run all applications, but I think you could use it to xGrid some work in combo with your MBP.

Similar Messages

How to install Small Business Server 2008 in an existing Active Directory domain

It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?

Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ?

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

How to install Oracle VM server on Sun Fire v100 server

Hi All
I have just a Sun Fire V100 Server.
How to install Oracle VM server on Sun Fire v100 server?
Thankyou and best regards,
Thiensu

user8248216 wrote:
I have install Oracle VM Server successful on PC Core 2 dual 2.93Ghz.
But Oracle VM Server does not detect onboard Network card.Your NIC needs to be supported by Oracle Linux 5 Update 3 to work with Oracle VM Server 2.2. If it's too new, then it will not be seen. Also, please start a new topic for each question. This new question is not relevant to the original topic.
Edited by: Avi Miller on Aug 19, 2011 12:46 PM

How to install data mining server?

when i build classification model,i found error,i don't
know how to install data mining server
please help me thanks

The data mining feature comes with the 9i/10g Enterprise database edition. If you have installed the Enterprise edition, you got the server. Look for the DM directory in your database installation for more information.

How to install oracle http server in the windows

Hi,
Can any one mention how to install oracle HTTP server in windows 2003 server machine?
regards,
suresh G.

Hi,
Which version of Oracle HTTP Server are you looking for ?
Download link,
http://www.oracle.com/technetwork/middleware/ias/downloads/101310-085449.html
Here you will get both Apache version 1.3.34 for OHS based on Apache 1.3 and Apache version 2.0.55 for OHS based on Apache 2.0.
Prerequisites
http://docs.oracle.com/cd/B25222_02/quickinstall.1013/quickinstall/quick_install.htm#sthref9
Installation steps
http://docs.oracle.com/cd/B25222_02/install.1013/install/basic_install.htm#sthref274
On the 1 st screen Select Advanced Installation Mode,
And select only Oracle HTTP server in the 2nd screen
Regards
Fabian

How to install Oracle Developer Server 6.0 on NT?

I am trying to install the Oracle Developer Server 6.0 on NT using the CD's available through the Oracle Enterprise Developer Suite for NT. The cover pack on the Oracle Developer Server 6.0 CD shows a product called Developer Server. (Please note that I have another CD called Oracle Developer 6.0 in the suite). However, when I run the installer and look at the products available on the CD, there is no product called Developer Server. The CD only contains Oracle Forms, Oracle Reports etc.
Further, I just tried a typical Development Setup, but it starts the installation and suddenly exits the installer without giving any error message or any other info. Why is the installer ending abruptly? Thinking that it is not a Y2K complaint Installer, I actually tried installing the CD contents from a Y2K complaint Installer but during the installation process, it exits with a message that the Installer need to be installed from the media. This message is displayed although I don't select Oracle Installer as one of the product to be installed.
Has anyone else faced a similar problem? Could some one let me know how to install the Oracle Developer Server 6.0 on NT.
Best Regards,
Arun Kumar B.
null

apple no1 wrote:
Hello everyone....I want to use microsoft visual C++ 6.0 on my macbook pro but it cant run on mac so please can you tell me the process of how to install it and please tell as soon as possible.. and my version is 10.6.6.
Please reply soon.
Install Windows using Boot Camp Assistant, or using a VM such as Parallels, Fusion, or VirtualBox. Then install Visual C++ (Visual Studio).

How to install Oracle HTTP Server 10.1.3.0 on Solaris 10

Hi !
I am new to solaris 10 and i want to install oracle HTTP server on solaris 10.
Kindly can any one share steps/documents how to prepare my system for installation
uname -r = 5.10
my user=oracle fro installation
group=oinstall oracle user group
Shell = bin/sh bourn shell
no variable defined in .profile file OR at any place
my istallation directory=> OracleHome ==> /home/oracle/OracleAs_1
my oraInventory directory=> orainventory ==> /opt/ora/oraInventory
following commands executed using root
chown -R oracle:oinstall /home/oracle
chown -R oracle:oinstall /opt/ora
chmod -R 777 /home/oracle
chmod -R 777 /opt/ora
============================
executing setup using oracle user
./runInstaller -executeSysPrereqs command output==> OK/Pass I dont have patch 118345-03
As patch 118345-03 is not required for the solaris 10with kernal patch/update 5.
./runinstaller and installation type= Advance => OC4j was installed successful but http server gives error.
HTTP server configuration assistant Fails. Setup doesnot complete.
error ==> http server fails to start Managed processes after the maximun retry limit.
error status 206
**** see HTTP_Server~1.log in opmn/logs folder. nothing in log except startprocess and stop process
**** Apache/Apache/logs don't have any LOG or httpd.id file.
========================================
When i start Apache using apactlstart.sh it runs and i can access http://localhost:777 ===> working with message use opmnctl
Need Help :) Thanks in advance

Here is such a description:
http://onlineappsdba.com/index.php/2007/06/20/install-oracle-soa-suite-101310/
Jon petter

How to install Apache Web server on my SAP Content Server

Dear Experts,
I am in the process of installaing Content Server in my landscape, i am working on Suse Linux 10 SP2 and planning to install ContentServer 6.30.
I have read the standard SAP installation document for the same and it says that we need to install Apache Web server version 1.3.XX, so i have downloaded the file apache_1.3.27-x86_64-whatever-linux22.tar.
Now i want to know the following before i take any actions on my further installation of the Content Server
What is the difference between Apache and httpd servers (services) are they different or same
Is the file apache_1.3.27-x86_64-whatever-linux22.tar correct to install Web Server on my Linux system
Do i have to download any other httpd files
How to install and start the Web server on my Linux
Waiting for some information
Thanks and regards
BasoKing

You can install a higher apache also (2.2.x), I'd not use the old versions. I'd also not use a "somwhere" compiled apache, you don't now if that version is clean.
I'd rather compile an own one, it's not that difficult:
Note 664384 - Generation info for Apache Web server for SAP Content Server
The result will be a default webserver (httpd) without any unnecessary modules compiled in.
Markus

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

How can install the Project Server on my special intranet network?

I want to work with my colleagues in Project Server 2013 on our special server. that server isn't connect to internet. can we use the Project Server on wetwork? and how can install it?

Hello,
As Ben already stated, download all of the software required and copy to the servers, also include the prerequisites:
http://blogs.technet.com/b/meamcs/archive/2012/12/26/install-and-download-sharepoint-2013-prerequisites-offline-manually.aspx
http://blogs.technet.com/b/cjrawson/archive/2014/04/06/offline_2d00_sharepoint2013sp1_2d00_prerequisites_2d00_server2012r2.aspx
Also probably worth reviewing / carrying out the steps below:
http://blogs.msdn.com/b/chaun/archive/2014/05/01/best-practices-for-crl-checking-on-sharepoint-servers.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

How to Install SAP j2ee server

Hi,
can anybody guide me as to how to install j2ee server on the local machine.
1. Where can i get the Installation version from.
2. wat r the config entries to be changed.
3. How can i make my own web console.
Note: The main aim is to use my own web console and delegate the request to ABAB stack remotely.
Regards
Anubhav

Hello Anubhav,
For installing SAP Web AS (Java) copy the following
two archives to your local machine:-
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/NW04SneakPrevJavaSP11.part1.rar
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/NW04SneakPrevJavaSP11.part2.rar
Steps:
1. Download both the .rar files in the same directory
Note: The path name length of the destination directory should not exceed 10 characters.
If you exceed the 10-character limit, the extraction process will fail.
2. You can erase the contents of this archive after the installation process.
3. A folder "NW04SneakPrevJavaSP11" is created after extraction.
Execute <b>start.bat</b> file in this directory to start the installation.
=====
For creating Web Console refer the <b>Additional Programming Techniques</b> section of the
SAP Web AS help documentation :
http://help.sap.com/saphelp_nw04/helpdata/en/60/fcbc3d16f39e33e10000000a11405a/content.htm
Please feel free to ask in case you face any problems.
Regards,
Tarun

How to install Oracle Management Server Oracle9i

Please tell me the steps one takes to properly install Oracle Management Server (Oracle9i) on a PC.
Which of the diskettes to use for installation, and what are the cookbook steps from 1 - 10 for a beginner. I thought I had
loaded the software on my system, only to discover the next day that I had not.
Thanks for your forthcoming help.
Mary

I also installed Oracle 9i yesterday but there is no Oracle Management Server Service in the Control Panel. How can this be rectified, any ideas anyone ?

How to install Windows Foundation Server 2012 R2

The following iso from MSDN Downloads only gives an option to install the Storage Server, how do you install Foundation Server from this iso?
en_windows_storage_server_2012_r2_and_windows_server_2012_r2_foundation_with_update_x64_dvd_4119206.iso
Thanks! JP

True the only way to buy Foundation Server is pre-installed by an OEM. However as a MSDN developer who needs to test software functionality on Foundation Server there must be a way to install it from the MSDN image. I was hoping it was like the
other server installs where depending on which key you gave the installer it would install the corresponding version (ie. Standard or Enterprise) But the install on the en_windows_storage_server_2012_r2_and_windows_server_2012_r2_foundation_with_update_x64_dvd_4119206.iso
will only accept a
storage server key and will not accept a foundation server key.
-jp

How to install Oracle VM Server 2.2.0 as 32-bit mode on a 64-bit machine.

Gurus,
If I am not wrong, the Oracle VM Server 2.2.0 installer for 32-bit and 64-bit are the same file.
I have AMD 64 bit machine, when I install Oracle VM Server 2.2.0, it installs as 64-bit.
However due to requirement, I want to install Oracle VM Server in 32-bit mode.
Will appreciate the steps.
Regards,
Krishna

Krishna,
Please note that the zip file from the Oracle eDelivery/Linux site contains a single Oracle VM server ISO file; this file is used for both x86 and x86-64 hardware. The Oracle VM server install routine automatically detects the hardware platform and installs the appropriate 32-bit or 64-bit Xen hypervisor. Regardless of the hardware platform, 32-bit or 64-bit, dom0 is 32-bit. Will a 32bit dom0 meet your business requirements?
Could you please let us know the business requirements re 32bit?
For details about the installation, sizing and server resource requirements please review http://itnewscast.com/chapter-4-oracle-vm-server-sizing-installation-and-updates
Respectfully,
Roddy

How to install os x Server Tiger

Similar Messages

Maybe you are looking for