How to install third party actions in photoshop CC2014

can some one explain this or point to a link that might clarify how to install an action in ps cc2014?
thanks,
tws

Thank you Jeff.
Welcome to the forum McDermottPhotography,
You will need to download and install the ttf (true type font again) on your new machine. I am not sure if the following is the font that you are referring to, but here is one named similiarly http://www.fontpalace.com/font-details/Chisel+Thin+Normal/.

Similar Messages

How to install third party fonts into Photoshop CS6 cloud?

Hi, in need of assistance. My previous version of PhotoShop was CS5, and I have my photography logos created using the font "chisel thin". Now that I have a new macbook pro laptop and am also now using the cloud version of PhotoShop CS6, when I open my saved logos on the cloud, it does not recognize the font "chisel thin"? So, is there a way to download the "chisel thin" font so it is available for me to use on the cloud? If so, how do I go about doing it? I'm not super tech savy, so clear, exact detailed instructions on how to download / update the "chisel thin" font would be very much appreciated!
Thanks for your help,
Mike (McDermott Photography)

Thank you Jeff.
Welcome to the forum McDermottPhotography,
You will need to download and install the ttf (true type font again) on your new machine. I am not sure if the following is the font that you are referring to, but here is one named similiarly http://www.fontpalace.com/font-details/Chisel+Thin+Normal/.

How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
Thank you.

Hi ,
Your windows is 32 bit or 64 bit .
If win 7 32 bit
Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
If win 7 64
PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
Thanks,

Installing Third Party Actions in PSE 7

I have figured out a way to add third party actions to PSE 7. It is similar to PSE 6, byt now all the files are in one directory, and they have changed the format of the XML files. Any suggestions or comments on how to improve the process would be greatly appreciated! To add third party Actions to Adobe's Photoshop Elements 7, you need four files: The Action file, which ends with a .atn A PNG icon for the action A JPG icon for the action A xml file for the action Assuming your action name is "Sample Action.atn", you will need: Sample Action.atn Sample Action.png Sample Action.jpg Sample Action.metadata.xml The xml file has the following format: <?xml version="1.0" encoding="UTF-8"?> <PSEContent xmlns="http://ns.adobe.com/PSEContent/2.0/"> <subscription value="free" /> <name value="$$$/content/photoeffects/NAME-NO-SPACE=NAME" /> <type value="effect" /> <category value="$$$/content/category/type/CATEGORY-NO-SPACE=CATEGORY" /> </PSEContent> So, if we wanted our sample action to be in a category called "3rd Party Actions", we would have a xml files that looks like the following: <?xml version="1.0" encoding="UTF-8"?> <PSEContent xmlns="http://ns.adobe.com/PSEContent/2.0/"> <subscription value="free" /> <name value="$$$/content/photoeffects/SampleAction=Sample Action" /> <type value="effect" /> <category value="$$$/content/category/type/3rdPartyActions=3rd Party Actions" /> </PSEContent> Copy all four files to the following directory XP: C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\7.0\Photo Creations\photo effects Vista: C:\ProgramData\Adobe\Photoshop Elements\7.0\Photo Creations\photo effects MAC: [system drive]:Library:Application Support:Adobe:Photoshop Elements:7.0:Photo Creations:photo effects NOTE: I have not tested the Vista and MAC systems, so the directories MAY be different there You now need to force PSE to rebuild it's database of effects. You do this by deleting or renaming the following files: XP: C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\7.0\ThumbDatabase.db3 C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\7.0\Locale\en_US\MediaDatabase.db3 Vista: C:\ProgramData\Adobe\Photoshop Elements\7.0\ThumbDatabase.db3 C:\ProgramData\Adobe\Photoshop Elements\7.0\Locale\en_US\MediaDatabase.db3 MAC: [system drive]:Library:Application Support:Adobe:Photoshop Elements:7.0:ThumbDatabase.db3 [system drive]:Library:Application Support:Adobe:Photoshop Elements:7.0:Locale:en_US:MediaDatabase.db3 NOTE: I have not tested the Vista and MAC systems, so the directories MAY be different there Start up the PSE 7 Editor. You sill see a progress bar as the effects databases are rebuilt. Once the databases have been rebuilt, you will find your new category in the Effects pallette under Photo Effects, or under the "All" section.

A minor update to the discussion. After more experimenting, I have changed the XML description. Assume we have the following files: sampleaction.atn sampleaction.png sampleaction.jpg sampleaction.metadata.xml The xml file has the following format: <?xml version="1.0" encoding="UTF-8"?> <PSEContent xmlns="http://ns.adobe.com/PSEContent/2.0/"> <subscription value="free" /> <name value="$$$/content/photoeffects/FILE-NAME=DISPLAY-NAME" /> <type value="effect" /> <category value="$$$/content/category/type/CATEGORY-NO-SPACE=CATEGORY" /> </PSEContent> Where: FILE-NAME is the name of the .atn file, without the .atn DISPLAY-NAME is the name you want displayed in the PSE 7 Effects Palette CATEGORY-NO-SPACE is the category name for the effect without spaces CATEGORY is the Category name you want the effect listed under So, if we wanted our sample action to be in a category called "3rd Party Actions", we would have a xml files that looks like the following: <?xml version="1.0" encoding="UTF-8"?> <PSEContent xmlns="http://ns.adobe.com/PSEContent/2.0/"> <subscription value="free" /> <name value="$$$/content/photoeffects/sampleaction=Sample Action" /> <type value="effect" /> <category value="$$$/content/category/type/3rdPartyActions=3rd Party Actions" /> </PSEContent>

How to install third-party SSD as boot disk in MacPro 5,1

I had so much trouble with this that I thought I'd post a recipe that others could follow.
The first thing you should know is that it's not possible to get a non-Apple SSD recognized in a sled slot of a MacPro 5,1. It just doesn't see them at all, even if (as some suggested) previously partitioned as a GUID partition (which works in a MacBook Pro, but not a MacPro 5,1). This is true even with the most up-to-date EFI firmware. You're going to have to use a PCIe adapter card.
The next thing you should know is that not all PCIe SATA3 SSD adapter cards are bootable on a MacPro 5,1. For instance, even though the Sonnet Tempo SSD is advertised as working for a boot drive in a Mac Pro, it actually works in any Mac Pro *except* the 5,1. In a 5,1 drives on the card do not work as boot drives, either with option boot or if you select it as the startup drive after booting from something else. Also, EFI boot is extended by about a minute -- not the end of the world, but an annoyance. The Tempo card does work well for add-on drives, its very fast. I am pretty sure the Tempo Pro variant of the card also does not work, as the Sonnet support guys told me that they have to use use rEFIt for booting 5,1 MacPros in their lab. I imagine if the Pro worked they would have pointed me at that instead. (Note that rEFIt has been superseded by rEFInd, http://www.rodsbooks.com/refind/. I didn't try using rEFIt or rEFInd because I found a better way, but if you want to dual-boot to Linux those utilities are apparently Da Bomb.)
An Apricorn Velocity x2 Duo card *will* boot, and does not have a long EFI boot delay. That card is a little more expensive than the Tempo SSD (but not the Tempo Pro SSD) but it works properly. It's worth the extra money, especially since it's the only card I could find that explicitly claimed to work as a boot drive on a 5,1 MacPro. And it does.
One caveat: With the Tempo SSD the SSD drives were invisible until repartitioned in GUID format, which also happens if you try to use a third-party SSD inside a Macbook Pro. I found that I could repartition one drive, a Crucial MX500 960GB, using a run-of-the-mill USB SATA2 adapter. Unfortunately this solution did not work with a Samsung Evo 1TB drive, I had to use an external USB3 enclosure. Moreover, the enclosure supported both FireWire and USB3 but FireWire did not work. This FireWire issue might be due to the super-cheap enclosure I was using, so YMMV, but keep in mind that it's possible that you'll need either a USB3 expansion card in the MacPro, or a different Mac, to perform the initial repartition to GUID format.
It's possible that SSDs would be visible on the Velocity card even before repartitioning, I don't know as both of my drives had been repartitioned prior to trying the Velocity. So, it might work ... but you might need to partition externally.
I don't know if pre-partitioning is necessary with the Velocity card, as I only ever tried pre-partitioned drives with it. If you try the Velocity and the drive isn't seen, that's the problem and you'll have to use an external SATA adapter of some sort to repartition before installing on the Velocity card.
After partitioning the drive and installing on the Velocity card, it worked fine. Yosemite installed properly and with reboot it blazed.
Next up, TRIM support. For some reason known only to Apple, the Apple AHCI driver refuses to enable TRIM support for anything other than Apple drives. It's possible that there are or were bugs in some of the early SSDs and Apple is just playing it safe, although I would have preferred to have the option to enable TRIM or not if that's the case. Unfortunately there is no such option, you have to use a substitute AHCI driver.
Unfortunately if you're using Yosemite you cannot use a substitute driver without disabling kext extensions, because Apple will not sign anyone else's driver (at least not at the time of this writing). That's unfortunate, I would prefer to have signed extensions if I could, but realistically speaking you're no worse off in terms of security than you were with Mavericks so it's not the end of the world. With a little luck Apple will either start supporting TRIM on third-party drives or starts signing third-party drivers sometime in the future.
So: Before you can start TRIMming drives, you first need to run this command, or something like it:
sudo nvram boot-args=“kext-dev-mode=1”
I rather like seeing the boot process, rather than just the Apple logo, so I use this:
sudo nvram boot-args=“-v kext-dev-mode=1”
I tried both Trim Enabler (http://www.cindori.org/software/trimenabler/) and Chameleon SSD Optimizer (http://chameleon.alessandroboschini.com/). As of this writing the Chameleon driver is more up-to-date, and comes with some additional utilities that are pretty nice. Take your pick, though, both worked fine in my experiments.
With a TRIM-enabled AHCI driver, kext signing disabled, a Velocity card, and your favorite SSD you are in business.
The only weird thing after all of this is that non-boot SSDs on the Velocity card (or on the Tempo) are ejectable. As far as I can determine there’s no way to mark them as non-ejectable. That’s a minor annoyance compared to the performance you get out of the SSD, though.
Because, with this stuff in there, yowza is the MacPro 5,1 a fast machine. You Will Like It. Enjoy!

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall? Is it necessary on a Mac to do so? I come from the Windows world and am still in the learning curve on the Mac.

Correct. I have not installed ANY other software for anti-virus, etc. I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac. HTC will not synch with it otherwise. That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac. In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur.
Thanks.

How to install Epson ICC profiles using Photoshop CC?

How to install Epson ICC profiles ussing Photoshop CC on Mac?

Danny,
Just stop and think for a moment. Firstly, it's not Rocket science to produce an icc profile, and does not involve the profile having to physically 'fit' into a pre-formed item such as the razor blade analogy you used.
Secondly, If the likes of Epson and HP did produce printer profiles for all makes of paper, can you imagine how much more product they would sell. Printer companies are currently missing out on substantial amounts of income at the moment because the cost of their inks is more expensive than gold! Thus, the third party ink manufacturers - although not producing an ink as good as the original - are earning large sums of money and once again this is income loss to the major printer manufactures. Can you imagine what would happen if certain vehicles would only run on a specific fuel? I don't mean Diesel or Petroleum, but different manufacturers, Shell, Texaco, Murco etc.
At the end of the day the only person who is adversely affected by this business model is us, the consumer.
I really don't think they need you to be standing up for them Danny.

Third Party Actions for PSE7

I found a site that shows how to easily add third party actions to PSE7. Hopefully this will light the ole light bulb for you as it did for me.
thanks
Jeff
http://www.scrappersguide.com/info_el7c.html
ps: I am having problems with linking layers. One forum tip was command (windows key??) shift. didn't work for me.

Using the smudge tool in the video link as she did to adjust the drop shadow is a nifty trick.
Web help...linking layers
Mac:
http://help.adobe.com/en_US/PhotoshopElements/6.0_Mac/WSae2ea3b149d0c3591ae939f103860b3d59 -7f98.html
Windows:
http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d59 -7f98.html
Perhaps, you've seen a Photoshop tip for a shortcut that uses the shift key in place of the ctrl/cmd key in the above help sections to select multiple layers...the two layers and every layer that lies between them. I'm not sure as to whether the shift click shortcut works in Elements.

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Installing Third Party Audio Units

Wonder if anybody can help. I have just bought a G5 Dual 2.3 and Logic Pro 7.1 I can not find any way of "installing" third party plug ins. I have checked the ones I have ( Waves Platinum for AU for OSX ) and they are valid for Logic 7. I have put several plugs in Applications , but they are not even appearing in Logic Audio Units Manager. Im probably missing something really simpe here. Im also having the same type of problem trying out "demo" versions of some new AU instruments e.g. X treme FX and MOTU MX4 Soft Synth ( that is appearing in Audio Unit Manager but will not open, so maybe its not valid for Logic yet?) Pleeeeeeease Help. Thanks. Paul

Hey Paul & Welcome!
I don't quite understand what you mean when you say you can not find a way of "installing".
You should have installers for your AU's. If you doubleclick one of those, it should take you through the installation process. Apologies if this is what you have done, but I become a little suspicious when you say you have "put several plugs in your Applications folder". This is sometimes the right procedure when it comes to installing certain applications (e.g. Reason), but rarely or never the case with plug ins. You need an installer.
Now, If indeed you have gone through the installation process, it is still possible that the plug in question won't show up as available. As you rightly point out, it may be rejected by Logics AU Manager.
Check in your following folders:
HD/Library/Audio/Plug Ins/Components
and,
Home/Library/Audio/Plug Ins/Components
wich is were your AU's are supposed to be located.
If they are not there, they are not installed. If they are there, they should be scanned by AU Manager and be validated or refuted.
When you have checked the folders, you can open Logic and run AU Manager and check the status of your installed AU's. The ones that have failed or crashed can still be selected by checking the little box, with the risk of making Logic unstable. You will indeed get a warning every time you open logic, telling you how many failed AU's you're currently running.
So, check for installers, check your component folders and cross reference with the AU manager.
Again, sorry if this is at a beginner level for you, I could not quite make out where you're at.
Good Luck!
Erik

Installed third party applications not showing Application folder?

Hi,
i've installed third party application outside from AppStore. i chosen "Anywhere" option on Gate keeper. however its not proper installation process hence how can i install? if i install third party application which is get .DMG file from some one else and installed. if i install those application its not displaying inside the Application folder on my Mac OS X 10.8.3.
Please anyone suggest me,
Thanks in Advance,
Suresh Balakrishnan.

if i double click on Xcode icon, Xcode application lauched immediatly. however Xcode is not there in the Application folder.
Because you didn't drag and drop copy the app into the Applications folder, so your running it from the DMG instead.
A DMG is basically a disk image volume, like any other seperate hardware volume like a USB thumb drive, a external hard drive, or another partition, except it's virtual and based all in software.
If you don't know your way around a computer you shouldn't be using Xcode to begin with.

Unable to install third party effects/titles. Missing folders in Motion Template.

Hi. I am unable to install third-party titles/effects/generators in FCP X version 10.2. I navigate to my Movies/Motion Templates folder and there are no subfolders in there. I created new ones labeled "Titles", "Generators", etc and placed the complete folder of the third party effects in the appropriate subfolder, but the effects do not show up in FCP X. I am on a managed laptop and do not have Administrative control. I am wondering if because I have a user profile with limited installation control, could that be affecting my ability to add the effects or is there something else that is wrong? Any help would be greatly appreciated.

Preferences do get corrupted rather often, and deleting them is usually one of the first thing one tries whenever something strange happens in FCP X.
How exactly did you delete the preferences? The current method of choice is by holding down the command and option keys when starting the application and then confirming when the dialog box comes up.
I have not tried running FCP X from a non admin user account. Whether this could be the issue, I can't say.
Can you post screenshots of a Finder window, in column view, showing the folder structure inside Motion Templates?

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Install third party certificate on MAC os X

Hello,
I have installed leport 10.5.X on my machine. I am new bie for MAc and want to install intermediate certificate for my domain from Digicert. I have registered from Digicsert. Please help me to how can I install on the machine. I also need to create a new certificate but when I tried to add it shows an error message like this.
"There are no valid root or intermediate certificate authorities available to sigh certificates. Use the "create certificate Authority" option to create a certificate authority."
Can anybody please help me to what should be the next step.
And how can I install third party certificate.
Thanks in advance.

There is a product called VolumeWorks that is supposed to do this. I looked at the demo, but I could not get it to see the extra space so I ended up backing it all up and erasing the Raid and doing a block copy with Carbon Copy Cloner.

BlackBerry-8800 Cannot Install Third-party softwares

Hi ... can anyone help me how to be able to change all settings (including password prompts), and install Third Party Applications
I am unable to make changes to the settings or install Third Party Applications. I have a Blackberry that was previously connected to a company's BES. Actually, I purchased this phone 6 days ago from open market; i dont know about the previous owner.
Please, Please, Please ...... someone help me
Solved!
Go to Solution.

Hi and welcome to the forums!
What Urumilton gave you was the ONLY procedure to remove an IT policy. A wipe will not remove the IT policy
Your other recourse is to box up the phone and return to sender.
Thanks
Bifocals
Message Edited by Bifocals on 01-18-2009 01:48 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How to install third party actions in photoshop CC2014

Similar Messages

Maybe you are looking for