How to install Windows Server 2008 (dualboot) on a PC with Windows 8.1 already on it?
Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too small
You should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps.
Similar Messages
-
How to up Windows Server 2008 R2 SP1 created VM with Windows 8.1 hyper-v manager
Hi
I have VM that created with Windows Server
2008 R2 SP1. This was up without a problem with the windows 8 hyper-v manager. I have recently upgraded my OS with 8.1. Now I have tried to import this VM but it
throwme following message.
This is a real pain when there is no way of doing this. Any help greatly appreciated.
Regards
RadikaHi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play! -
How to install SQL SERVER 2008 r2 in window 7 home premimum 64bit
how to install SQL SERVER 2008 r2 in home premimum 64bit os. can any say that weather it will support or not in window 7 home premimum os.
my server log file:
Final result: SQL Server installation failed.
To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation
failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-27 00:52:25
End time: 2014-03-27
00:56:09
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL
Server\100\Setup Bootstrap\Log\20140327_005035\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: SEVALAL-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance
Instance ID Feature Language
Edition Version Clustered
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
Database Engine Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
SQL Server Replication 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
Full-Text Search 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER
Analysis Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER
Reporting Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL
Database Engine Services 1033 Express Edition 10.3.5500.0
No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL
SQL Server Replication 1033 Express Edition 10.3.5500.0
No
Sql Server 2008 R2
Client Tools Connectivity 1033
10.50.1600.1 No
Sql Server 2008 R2
Client Tools Backwards Compatibility 1033
10.50.1600.1 No
Sql Server 2008 R2
Client Tools SDK 1033
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services
2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: G:\01.SQL Server 2008 R2 FullVersion\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup
Bootstrap\Log\20140327_005035\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: IS,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL
Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft
SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup
Bootstrap\Log\20140327_005035\ConfigurationFile.ini
Detailed results:
Feature: Integration
Services
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management
Tools - Complete
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management
Tools - Basic
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync
Framework
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passedmy summary log file information:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-27 00:52:25
End time: 2014-03-27 00:56:09
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: SEVALAL-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text Search 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER Analysis Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER Reporting Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL Database Engine Services 1033
Express Edition 10.3.5500.0 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL SQL Server Replication 1033
Express Edition 10.3.5500.0 No
Sql Server 2008 R2 Client Tools Connectivity
1033 10.50.1600.1 No
Sql Server 2008 R2 Client Tools Backwards Compatibility
1033 10.50.1600.1 No
Sql Server 2008 R2 Client Tools SDK
1033 10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: G:\01.SQL Server 2008 R2 FullVersion\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: IS,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\SystemConfigurationCheck_Report.htm -
How to install SQL server 2008 express on Windows server 2008 R2 standard OS
Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
RegdsHello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How can install SQL Server 2008 Integration Services without CD?
How can install SQL Server 2008 R2 Integration Services without CD?
The PC with Windows 7 32-bits is far away and poor bandwidth . So, I want to install SQL Server 2008 Integration Services without CD.
Does any installer for SSIS only?Copy the install media from a memory stick, portable drive or network.
Arthur My Blog -
We want to activate Windows Server 2008 R2 on the system where trial version is already activated,
Hi,
Based on your description, I’m a little confused with this issue.
If you mean that convert the Windows Server 2008 R2 evaluation version to a full version, we can get following
details from this KB: Windows Server 2008 R2 and Windows 7 evaluation version
Question: Can you convert the evaluation version to a full version?
Answer: Although this conversion is not blocked, we do not support an upgrade from an evaluation version
to a full version or changing the product key to a full version key. Since there is no support for any type of upgrade you must do a install to new directory using non-evaluation media. If you change the product key to Full Version, the visual evaluation references
in Winver and as displayed in Slmgr /DLV output are removed, but the WLMS service remains on the system and the media retains its evaluation status.
Meanwhile, please refer to the following similar thread and check if can help you.
Server
2008 R2 180 day Trial to Full
If just mean that extend Activation Grace Period, please refer to the following article.
Extending
Your Activation Grace Period on Windows Server 2008 and 2008 R2
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu -
SQL Server 2008 R2 Standard - Compatibility issues with Windows Server 2012 R2
Hello,
We used as a test a box on which we installed Windows Server 2012 R2 and SQL Server 2008 R2 Standard Edition. No Service pack was installed. It worked perfect.
Now we try to do it on another box and all of the sudden there is compatibility issue when we try to instal SQL Server. We can still install SQL Server by clicking "Continue without getting help".
Where can this come from? If it is hardware related what are the thing I should look at?
Thanks allHello,
Adding to Shanky suggestion, you can perform a slipstream installation of SQL Server 2008 R2 + SP3 to make SQL Server
2008 R2 compatible with the newer operating system, as explained on the following post.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
https://support.microsoft.com/en-us/kb/955392/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Windows Server 2008 R2 DNS service issue with BitLocker
I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
and recovery dialog because the OS failed to boot.
I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
Any help would be greatly appreciated as this system cannot be booted in its current state.
Peter C. Hesse Network/Systems AdministratorHi,
I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
manage-bde /?
manage-bde -autounlock -enable Driveletter:
But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
Below are some links that might help:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
Hope this helps.
Regards,
Calin -
Windows Server 2008 R2 SP1 BSOD 0x1a with CLFS.sys
Hello,
I've got a BSOD on a Windows Server 2008 R2 with SP1 installed. Analyzed the dump and could
see a Bug-check of 0x1a which means "MEMORY_MANAGEMENT".
Further analysis on this dump shows me, that this probably is caused by the CLFS.sys, which
is the Common Log File System Driver. This CLFS.sys is installed with date:
Tue Jul 14 01:19:57 2009
I have now searched trough MS Support pages and resources and also the Internet, but I found no
information about an update for this or a newer version. It's nearby impossible to find newer versions
for specific files in i.e. Hot-fixes.
Do you know this issue with the 0x1a BSOD and CLFS.sys and/or do you know a newer version ?
Any help would be very appreciated!
Thanks and regards plus have a nice day !
TinoHi Tino,
Regarding to Bug Check 0x1A, please refer to following article.
Bug Check 0x1A: MEMORY_MANAGEMENT
Did you install any third-party application in this problematic server? Would you please let me know whether
the BSOD issue occurred regularly? Or just occurred suddenly? If the BSOD issue occurred regularly, please
perform a clean boot and check if this BSOD issue still exists.
In addition, please check if necessary updates need to be installed and drivers need to be updated. Please
run sfc /scannow command to scan all protected system files and check if find errors.
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Actually, it is not effective
for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
àThis CLFS.sys is installed with date: Tue Jul 14 01:19:57 2009
àor do you know a newer version?
By the way, I checked the CLFS.sys in a Windows Server 2008 R2 in my Lab environment. It also created in July
2009.
Hope this helps.
Best regards,
Justin Gu -
Re-use Hyper V VM built in Windows Server 2008 R2 host in a new Windows Server 2012 host
Hi Forum members,
I was assigned a Windows Server 2008 R2 host machine with Hyper-V which I used to build many VM's for testing. This host machine now is going to be replaced with a new Windows Server 2012 host machine. Is it possible for me to continue
to use those VM's without any migration (e.g. is it possible to import or simply move the *.vhd + *.avhd files from the 2008 Server to 2012 Server and use them)?
Thanks and Regards,
HienThat is the official statement of 'support'
They will run, and you may need to do some custom configuration (such as using a legacy nic) but you can't call MSFT support and say your Server 2003 VM is broken on Hyper-V 2012 R2
The act of importing the configuration and linking to the VHD and snapshots will work.
The act of booting the VM and having the OS in the VM 100% happy is not automatic, but should work.
It becomes a question of where do you place the risk.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
How to configure Sql Server 2008 R2 for debugging without disabling Windows Firewall?
When I try to debug a procedure in Sql Server 2008 R2 I get a dialog box telling me to unblock some ports.
>>
The Windows Firewall on this machine is currently blocking remote debugging. Remote debugging requiers that the debugger be allowed to receive informatino from the network. Remote debugging also requires DCOM (TCP Port 135) and IPSEC (UDP 4500
/ UDP 500) be unblocked.
<<
I went to the Windows Firewall and added some new Inbound rules for each of the specified ports (in the images below. But after this and rebooting entire computer -- I still get this dialog box when I want to go into debug mode from SSMS. I can
actually kind of debug standalone code in the SSMS window if I cancel the dialog box. But I can't debug an actual stored procedure -- which is what I need to do. I also noticed that my server has an IP address instead of LocalHost. This is
not a public Server -- it's my private development machine which is on a peer to peer network (with one other workstation), but I don't need that workstation to be able to access this server.. Would localholst make a difference for debugging? How
should I configure the sql server? The firewall?
Rich PUse PRINT and SELECT for debugging. That's what I do. I used to play with the debugger in SQL 2000 and older days, but I realised that I spent more time on getting it to work that I gained from using it.
I thought about that. I guess that IS the way to go. Very well. Thank you for the suggestion. Although, when the debugger does work in the regular window (not a stored proc because it doesn't work there) the debugger IS nice.
For debugging my proc I am thinking I will insert param vals into a test collection table for now. One obscure error I am getting with a particular proc -- in a When loop on one parameter I get the "value will be truncated" error -- but everything
is set to accept 1000 characters and none of the source data even comes close to 1000 characters. I have isolated at what point the error occurs and which section of data where the error is occurring but I have not isolated the cause of the error.
I cannot reproduce the error when I run the procedure by hand in a regular query window with the exact same code. The error only occurs when the code is run in the stored proc.
Rich P -
How to install apche server 10g(10.1.3.x) on windows
hi
i want install apache server (10.1.3.x) in windows Xp environment can any help on this
thanks & regards
baleeswarCheck if this URL can help you.
http://otndnld.oracle.co.jp/document/products/as10g/101300/B25221_03/core.1013/b25209/getting.htm#CHDCHDIF
Regards,
Sabdar Syed. -
My English - bad =)
Download SQL Server 2008 R2 Express ADV SP1 from
http://www.microsoft.com/en-us/download/details.aspx?id=26729
this
SQLEXPRADV_x64_ENU.exe
Installed, opened Management Studio,
made the request
print @@version
result:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 6.1 (Build 7600: )
How to install the 2008 R2 Express ADV?? =)
I can't open the database version 661, because SQL Server 2005 - 612Hi,
You just installed SQl server management studio I guess and when you connected the system already had SQL Server 2005 and it connected to it.
If you are sure you installed express with advanced services (2008 r2) you need to go to Start..all program..can you see SQL server 2008 r2 listed ?
Now open SSMS for 2008 r2 and instead of connecting with default instance look for other instances in drop down in server name you would fine that for SQL Server 2008 r2 connect to that
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Windows Server 2008 driver for LaserJet 4100 with envelope printer
I have a new Windows 2008 Server 32 and a handful of HP printers. I need a driver for the LaserJet 4100 with an envelope feeder. The universal driver doesn't appear to recognize (or give an option to find) the envelope feeder. The old drivers I used on the previous server won't install on the 2008 box.
I can;t be the only person with an envelope feeder on this machine. Can anyone help or point me in the right direction?
Thanks
JeffI'm afraid I'll have to refer you to the Business Support Forums for further help. They're more well-versed with Laserjet printers.
Business Support Forums
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Maybe you are looking for
-
How to move contacts from one account to another
I have 2 exchange accounts configured in my iPhone, one Corp exchange account and one personal exchange account, both have Contacts sync enabled. I noticed somehow all of new created Contacts are under Corp account, these Contacts do not show up on m
-
HT4528 How do I sync my iphone 5 with microsoft outlook to load my contacts?
How do I sync my iphone 5 to enable me to link my microsoft outlook contacts and vice versa?
-
Howto use comments in JSF pages
Hi all, I play a little bit with JSF, at the moment. I wonder that I cannot find any information about how to comment out a part of a JSF page, that it is not rendered. If I use the html comment tags <!-- --> then this part is already rendered if I a
-
Process events and business functions: automatic insertion of process event
Here is the scenario: I defined (in Designer 9.0.4.5.6) a number of business functions. Some of them are basic functions, others are Business Rules. When I am trying to link them up the following happens: I have a function FUNCCON31 that I want to co
-
Changing Sequence Settings?
Guys, I think I may have made a major boo boo! I edited a sequence but when I render it certain parts (mainly the ones with speed adjustments) stutter. I think I forgot to change the sequence setting prior to beginning the edit. It normally asks me i