How to invke the XSQL Servlet directly

What I am really trying to achieve is the ability to forward an xml document to the XSQL servlet for further processing.
How can I invoke the servlet rather than go via an xsql page and what parameters do I need to pass in order for it to work.
I'm wondering out loud if the new filter capabilities of servlet 2.3 will achieve the desired effect.
Any ideas?

You can get the RequestDispatcher and call forward() on it
to forward to an XSQL page. From another one of your posts
it seems you might have already figured this out. :-)

Similar Messages

  • Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

    Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Setting up the XSQL Servlet engine

    I am trying to set up the XSQL servlet component of 9iAS. From what I read all of the necessary components are included in 9iAS, there is no need to download the XSQL servlet from technet. Is this true? I try to run the demo's (e.g. hello world) but am always getting a connection refused error. I edited the XSQLConfig.xml file to include the host, port and sid but still no luck.
    I am at a loss. I have 8.1.7 SE database installed with JDBC drivers, 9iAS 1.0.2. Is this all I need or do I have to download something else.

    Steven,
    Thanks for responding. I am a DBA so I'm only 50% incompetent. The 9iAS version is 1.0.2.1.0 Solaris and the DB is 8i SE, right now on the same Solaris box. The Jserv and JSP demos on the initial install home page work fine and I was able to get Oracle Portal running etc. so I think the Server is working. When I check the installed products for the DB I see several JDBC drivers appear to be installed.
    segmet from XSQLConfig.xml:
    <connection name="demo">
    <username>scott</username>
    <password>tiger</password>
    <dburl>jdbc:oracle:thin:@192.100.146.22:1521:NPGSDEV</dburl>
    <driver>oracle.jdbc.driver.OracleDriver</driver>
    </connection>
    I can connect scott/tiger@npgsdev in sqlplus as well as tnsping npgsdev and the port is 1521 so the tnslistener is up and running.
    I can call up the demo page at: http://192.100.146.22:7777/xsql/java/xsql/index.html
    but any attempt to run them gives:
    Oracle XSQL Servlet Page Processor 1.0.0.0 (Production)
    Oracle XSQL Servlet Page Processor 1.0.0.0 (Production)
    XSQL-007: Cannot acquire a database connection to process page.
    Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135294976)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    Any help would be greatly appreciated. -quinn

  • How to run the cocoa app directly after completion of downloading ?

    Hi ,
    How to run the cocoa app directly on mac after completion of downloading ? I have a .app at server , I want to run the .app automatically after download and the .app should not save at download directories .
    Thanks

    hi,
    There is no need to burn on Disk..instead run the runInstaller file fiom Disk1/install..please read the readme.txt file before installation..
    check the kernel parameter and Even set the DISPLAY before installtion,in order to get proper GUI
    Regards
    Fabian

  • Are there any loggin capabilities in the xsql servlet??

    Hi,
    I would like to log things like query results, errors etc on the file system when using the xsql servlet.
    Is there facility in say XSQLConfig.xml, that will allow me secify a file name that will be subsequently used by the xsql servelet to do this.
    Note I know this can be done using standard Java methods, when using the XSQLRequest object. I am trying to avoid doing this, if the xsql servlet itself can be used.
    Thanks,
    - Manish

    Hello Michael,
    You may use Java callouts with Oracle B2B for transformation purpose but it is not recommended to do heavy transformations in that. For light transformations you may use this. TP facing callouts are also supported.
    Please refer -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/callouts.htm#CHDEFBDG
    Does the EDIFECS XEngine, used by the Oracle SOA Suite 11g B2B at runtime, have hooks that can be used to configure custom transformation logic and associate it with specific trading partner agreements or channels?No. EDIFECS Xengine is used for translation purpose only. It uses ecs file for translation and validation. In short, it is for translation support.
    Regards,
    Anuj

  • How do I get XSQL Servlet to work with OCI 9i

    I'm using the most recent jdbc driver (ojdbc14.jar) that works with jdk 1.4. I'm using a 9.0.1 db, and I'm using xdk for java 9.2.0.3. If I specify an oci driver in the XSQLConfig.xml file, I get the following error with a xsql:query request:
    Oracle XDK Java 9.2.0.3.0 Production
    XSQL-017: Unexpected Error Occurred
    java.lang.UnsatisfiedLinkError: no ocijdbc8 in java.library.path
    Now why does XDK insist to look for ocijdbc8 if I only have ocijdbc9.dll installed on my client? The config file only allows oci8 in the dburl specification, which is probably why XDK insists to look for ocijdbc8, but I CANNOT specify oci9, which would make sense to me, although it's most likely not a valid specification.
    <connection name="9ic">
    <username>scott</username>
    <password>tiger</password>
    <dburl>jdbc:oracle:oci8:@</dburl>
    <driver>oracle.jdbc.OracleDriver</driver>
    <autocommit>true</autocommit>
    </connection>
    So how do get XSQL Servlet to work with OCI 9i?

    If you are using the latest Oracle9i JDBC driver, which you should be able to get from OTN, it should look for the DLL with 9 in the name.
    Perhaps you have a "stale" JDBC driver somewhere earlier on the classpath?
    Steve Muench
    JDeveloper/BC4J Development Team
    Author, Building Oracle XML Applications

  • How to install oracle xsql servlet on bea weblogic 5.1

              Hi there,
              I tried to install oracles xsql servlet (1.0.4.1) on bea weblogic 5.1 without
              any success.
              in weblogic.properties I started with:
              weblogic.httpd.webApp.xsql=c:\\weblogic\\myserver\\servletclasses\\xsql
              And in this dir I have WEB-INF with the following web.xml:
              <?xml version="1.0" encoding="ISO-8859-1"?>
              <!DOCTYPE web-app
              PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
              "http://java.sun.com/j2ee/dtds/web-app_2.2.dtd">
              <web-app>
              <servlet>
              <servlet-name>oracle-xsql-servlet</servlet-name>
              <servlet-class>oracle.xml.xsql.XSQLServlet</servlet-class>
              </servlet>
              <servlet-mapping>
              <servlet-name>oracle-xsql-servlet</servlet-name>
              <url-pattern> *.xsql </url-pattern>
              </servlet-mapping>
              </web-app>
              So the xsql extension is mapped to the named servlet which is found in a jar file
              contained in subdirectory lib.
              The problem is that the general mapping of *.xsql extension to specified class
              does not work at all. And there are no errors...
              Application server just presents me with the content of the xsql file instead
              of executing servlet whith the xsql file as input.
              Any ideas??
              Thanx in advance.
              JK
              

    What kind of problem do you have?
    If it's not connected with JDBC, you'd better post your question
    in webservices newsgroup.
    Regards,
    Slava Imeshev
    "leopld goess" <[email protected]> wrote in message
    news:[email protected]..
    hy out there.
    i've been working with apache soap on wl 5.1 for a while now, and
    everything seems to be working allright- as long as i don't try to
    install a servicepack, namely sp8 or sp10. if i do that, the entire
    soap service fails to deploy.
    any ideas...
    thanx
    leopold

  • How to change the billing qty directly during VF01 in AFS?

    Dear experts:
       Can anyone advise how we can change the billing qty directly during VF01 in AFS? Can anybody tell me why i can modify the billing qty in SAP R/3 ECC6.0, but it fail to in AFS, why?
    The operation was:
    1、I have  to done one customising, in VOV7 for my Item category change the Billing Relevance to "K"；
    2、We setting up as Delivery note  related billing and would like to change the qty at the point of billing；
    3、Enter the Delivery note number Do not Press Enter, Then Click on u201Cselection listu201D, however , the field of "open quantity"  is in greyed out mode !
    In SAP R/3 ECC6.0 ,In transaction VF01 put the Delivery note NO. and before entering or executing go to "selection list" and we will find the quantities in editable mode and we can change there and then execute billing,but in AFS,the field of "open quantity"  is in greyed out mode ! I asked a lot of friends in AFS, they also  have this problem!
    Thanks
    Peter.lee
    Edited by: peter.lee on Nov 19, 2011 3:05 AM

    Hi Guys,
    Contrary to others IS (retail, oil etc...), AFS has been almost fully redesigned in some areas. That's why SAP releases first EHP business functions for standard and then try to enhanced the new created features later in AFS EHP.
    In regards to the change of the billing quantity, from my prospective this is not supported. Quantity always comes from preceding document.
    AFS is implemented in many industries like workwear, fashion high fashion, sportwear, underwear, bags etc...However I never got the same requirement to change the billing quantity.
    For which reasons do you need to change the billing quantity ? Can this be done in the sales order (in case of debit/credit memo request) or in the delivery ?
    The billing area has some restrictions, such as doing a pricing redetermination, in AFS it must be done in the sales order for example.
    You could potentially ask SAP and see whether an advanced modification could be provided (this is chargeable).
    Hope this might help.
    Regards,
    Mehdi

  • How to set the EKET-FIXKZ directly?

    If you make in transaction ME38  manual changes to a line of a scheduling agreement delivery schedule that was created via the materials planning process or if you create a scheduling line manually the EKET-FIXKZ will be set to 'X'. Alternativly you can use BAPI_SAG_CHANGE. If you transfer a changed quantity to a item line the EKET-FIXKZ will be set too.
    I have to set certain scheduling line to EKET-FIXKZ = 'X' and at later times to EKET-FIXKZ = space (and vice versa).
    I should not use "UPDATE EKET SET FIXKZ = 'X'.".
    Does anybody know a way to change the EKET-FIXKZ directly with standard functions?

    Hi,
    The initial entry point Navigation Node after first login is the Navigation Node with lowest Sort priority number.
    The sort priority of a Navigation Node can be between 0 and 100.
    So value 0 means priority undefined, so you can use from 0.1 till 100 to set the priority, where 0.1 will be the first node that will be shown after first login. Ofcourse you can also use 1 till 100, no need to break down to decimals.
    From NW7.0 SP14 there is also a new feature which sorts Navigation Node Alphabetically, so you can also define this setting, which then can be combined with sort priority.
    Check this how to Define the Sort Sequence of Navigation Nodes:
    http://help.sap.com/saphelp_nw70/helpdata/EN/92/3e703e632c7937e10000000a114084/frameset.htm
    Regards,
    Praveen Gudapati

  • [iPhone development] How to load the App Store directly from an app?

    I need to figure out how to load the app store from one of my applications by clicking a button. The code is relatively easy to load say a website. But when I use this code:
    -(IBAction)goToAppStore;
    [[UIApplication sharedApplication] openURL:[NSURL URLWithString:@"http://itunes.com/apps/appname"]];
    it does not work, because it says too many redirects occurred.
    Is there a way to load the app store (and load into a specific app info view) directly from the app, instead of loading a website to load the app store?
    Thanks very much,
    LOQ123

    Thank you.
    But I using the one line code I had too many redirects. So, I needed the latter code, which didn't load the app store until all the redirects have happened. Unfortunately I don't understand this code:
    // Process a LinkShare/TradeDoubler/DGM URL to something iPhone can handle
    - (void)openReferralURL:(NSURL *)referralURL {
    NSURLConnection *conn = [[NSURLConnection alloc] initWithRequest:[NSURLRequest requestWithURL:referralURL] delegate:self startImmediately:YES];
    [conn release];
    // Save the most recent URL in case multiple redirects occur
    // "iTunesURL" is an NSURL property in your class declaration
    - (NSURLRequest *)connection:(NSURLConnection *)connection willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)response {
    self.iTunesURL = [response URL];
    return request;
    // No more redirects; use the last URL saved
    - (void)connectionDidFinishLoading:(NSURLConnection *)connection {
    [[UIApplication sharedApplication] openURL:self.iTunesURL];
    I'm know where to implement the code, however I don't know where to put my link in inside the specific code up above.
    Please help me
    Thanks very much

  • How to delete the request in Direct Update DSO

    Dear Gurus,
    I have a situation where I have an invalid characteristic loaded into the Direct update DSO.  This is related to Spend Performance Management.  This DSO is loaded through a data source with the option Without Archive.  So, I cant see any request in this DSO.   This DSO will then supply data to another DSO which is standard DSO. 
    The data Activation job in the standard DSO is failing. 
    My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO.  I have already repaired the data in PSA.
    Your Kind help is greatly appreciated.
    -Mohan Kumar

    You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see  request number under the manage tab for direct update dso for any load.
    Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's  and previous data will get deleted automatically
    Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

  • How to insert the new Servlet Api Class files?

    Hi,
    I need to know how do I add the Servlet Api Class to my java directory
    after i download it from the net? Thanks for your help in advance!

    niceguyme,
    If you downloaded the J2EE 1.3.1 API and installed it to (for example) c:\j2ee131, then what you need to add to your class path is:
    c:\j2ee131\lib\j2ee.jar
    I also add c:\j2ee131\lib\ejb10deployment.jar to the classpath, but it is not necessary.
    there are several ways to add these to your classpath. It depends on what Operating System you are using. On windows 98 type OS, you can edit the autoexec.bat and add these directly to your already existing classpath. Windows NT,2000, and XP: you can add them to the system environment variables classpath. Hopefully you know how to do this on your machine. What I like to do on the windows machine is create a batch file that will start it from within a command prompt. I do this because there are times when I need to compile my code using different versions of the Java api. I am enclosing an example of one for J2se1.4.1 and j2ee1.3.1.
    contents of java141.bat
    @ECHO OFF
    ECHO JDK 1.4.1 and J2EE 1.3.1 are current versions
    set HOLD_CP = %CLASSPATH%
    set HOLD_PATH = %PATH%
    set CLASSPATH=.
    set CLASSPATH=%CLASSPATH%;e:\jdk14\jre\lib\rt.jar
    set CLASSPATH=%CLASSPATH%;e:\jdk14\lib\dt.jar
    set CLASSPATH=%CLASSPATH%;e:\jdk14\lib\tools.jar
    set CLASSPATH=%CLASSPATH%;e:\jdk14\lib\htmlconverter.jar
    rem **** J2EE STUFF ****
    set CLASSPATH=%CLASSPATH%;e:\j2ee131\lib\j2ee.jar
    set CLASSPATH=%CLASSPATH%;e:\j2ee131\lib\ejb10deployment.jar
    set CLASSPATH=%CLASSPATH%;%HOLD_CP%
    set PATH=e:\jdk14\bin
    set PATH=%PATH%;"C:\Program Files\TextPad 4"
    set PATH=%PATH%;c:\windows\command
    set PATH=%PATH%;%HOLD_PATH%I hope this helps.
    TJJ

  • How to view the Billing data,direct postings from FI and Over head costs

    Dear All,
    I have created a PA report by Report Painter and when I execute the report by KE30,I could able see the report for billing data by selecting the 'F' and when I want to see the direct postings from FI,I have to come back to initial screen ,then select 'B' and similarly select 'D' for overhead costs.
    Can I see all data (i.e billing,postings from FI & overhead costs ) in a single report,without selecting the Record Type.
    Regards
    Su

    Hi,
    In KE35 (Form),I have defined the columns (for actuals and plan) and rows (for value fields only) and in KE32 (Report),I have defined the characteristics and variables and when I defining the VARIABLES ,I have selected 'Record Type' as one of the variable.
    As you said that I have tried to remove the Record Type as a variable,but i could not remove it .  Please suggest me as how to remove it and take it as a Characteristic.
    Regards
    Subbu

  • How to Access the Remote Servlet through a JSP Page

    Hi ,
    I wrote a servlet in my local system and It is running very well in my tomcat server5.5. Now I write a JSP code an another one system. Now I don't know how to call my servlet when Click a submit button. I need a small example or idea about this. Help me
    Thanks in advance,
    Maheshwaran Devaraj

    Just like any other servlet or form-processing script. What would a mere HTML page know about "systems"? Put the URL into the form destination attribute and be done.

  • How to delete the unwanted entries directly from the UWL of MSS

    Hi experts
    I see an unwanted item stuck in WL of approver but not in his
    inbox how can i delete this entry form UWL,ihave tried refreshing UWL but the problem still persists please explain.
    when trying in the dev system
    *I actually applied leave from a test user
    his manager is able to view this workitem in his inbox
    then went into the background SAP and manually completed the workflow
    now if i go to the managers inbox i dont see it there
    but i still see it in UWL
    Could there be any reason for this,Please advice*
    Thanks in advance for your anticipated cooperation

    Hello,
    It is not easily possible to delete the workitems from UWL in MSS except using Batch program in backend ECC.
    Check again in the ECC, the workflow is got trigered and there is surely workitem in the manager's SAP Inbox. Check the tcode swia, enter the workflow task number and the workflow is got triggerred.
    Use swi5 tcode to see the Completed Workitems and to be completed workitems for that Employe (manager).
    The other reason could be.....somebody might hv executed this wf item, but still lying in UWL lists in  MSS.
    Try to re-register the system using UWL Wokflow Administrator in System Administration.
    Hope this helps.
    Regards,
    Anil Kumar.

Maybe you are looking for

  • Problem with location bar search

    Before upgrading to Firefox4, when I'd type something in the box, Firefox would try to direct me to the location I'd intended. But now with Firefox4, it doesn't happen anymore, and instead, it shows a search result by Babylon Search. what can I do to

  • Automatically create a profile page when user registers?

    Hi everyone, I am building a site along with other people and I am the main web designer. I need to know how to have my site automatically create a users profile page when the said user registers on the site. Something very similar to YouTube or MySp

  • VI Properties dialog is slow

    Has anyone experienced this with LV 8.5?  I have a large project open, and when I try to pull up the "VI Properties" dialog box it takes between 10 to 15 seconds to open.  It is a large DSC-based project (whether that has any relevance). Thanks, Davi

  • Another string pool clarification

          public static void main(String[] args) {           char[] diff = new char[]{'D','i','f','f','e','r'};           String s = new String(diff);           String t = new String(diff);           System.out.println(System.identityHashCode(s));       

  • Compressor is not a finder "open with" recommended application for qt's

    On my macbookpro If I select a quicktime file in the finder and go to the file:open with:recommended applications, compressor is not a choice. I can easily choose it as a nonrecommended application, but it's a bit of a pain. The same is true for a qu