How to join HR_API_TRANSACTIONS and wf_item_activity_statuses table?

Hi, please help im having issues joining the following tables:
im getting muliptiple records, cos a workflow has muliple records.
i want to show the wfis.activity status (the status that shows in e-business suite - workflow admin)
is there a join that im missing ??
select *
from HR_API_TRANSACTIONS HAT, HR_API_TRANSACTION_STEPS HATS, wf_item_activity_statuses wfis
where hat.transaction_id = HATS.transaction_id
and HAT.status IN ('Y','YS')
and hat.TRANSACTION_REF_TABLE = 'PER_ABSENCE_ATTENDANCES'
and hat.TRANSACTION_GROUP = 'ABSENCE_MGMT'
and hat.TRANSACTION_IDENTIFIER = 'ABSENCES'
and hat.TRANSACTION_REF_ID is not null
and hat.item_key = wfis.item_key
Thanks,
.....

This is more a question for the EBS forum than the Reports forum. Better ask it there.

Similar Messages

  • How to join Dimensions and Fact Tables in OBIEE

    Hi All,
    I need to create report which need to get the information from two fact tables and 7 dimensions. The granularity is not same in both the fact tables. One fact table is having common keys between all the dimension tables and second fact table have only two dimension keys but with different names. My requirement is to create the report by taking the measures from both the fact tables.
    I have created joins between the second fact table and two dimension tables in physical and BMM layer and also set the highest level for all other dimension tables in the LTS of second fact table. when am creating report by taking the measures from both the fact tables, data is not getting for the measure which taken from the second fact table. Please advice me how to get the data for the measure which taken from the second fact table.
    Thanks in Advancec !!

    You have to use the level-base measure capabilities.
    http://gerardnico.com/wiki/dat/obiee/bi_server/design/fact_table/level_based_measure_calculations
    For all measures of the second fact table with the lowest grain (with two dimension keys), set for all dimension where you don't have any key the logical level to the "All" or "Total".
    And UNSET the highest level of the LTS for the second fact table.
    Success
    Nico

  • How  to join OE_ORDER_HEADERS_ALL  and HZ_PARTY_SITES,HZ_PARTIES in R12

    Hi all,
    Please Clarify.
    How to join OE_ORDER_HEADERS_ALL and HZ_PARTY_SITES,HZ_PARTIES in R12

    how can i make a join to get the Customer_Name and Customer_Number from RA_Customer table and oe_order_headers_all and oe_order_lines_all......thanks in advancePlease see these docs for examples on how to join those three tables.
    Multiple Language Request For Sales Order Acknowledgment Has Performance Issue [ID 1275133.1]
    Shipment History Data Are Not Populated In Dp [ID 889057.1]
    Disc0unt Did Not Apply To Sales Order Line With Volume Offer As Modifier [ID 1415593.1]
    Thanks,
    Hussein

  • How to join BKPF and BSEG

    Hi Experts,
    how to join BKPF and BSEG
    Thanks
    nagini

    Hi,
    BKPF is Transparent table but BSEG is cluster table.  We can't create views by joining cluster tables.
    hope it helps...
    regards,
    Raju

  • How to join two pl/sql tables .,.,,Urgent pls help

    Hi,
    Please tell me how to join to pl/sql tables with example
    thanks
    asp

    If your main intention is to get the common records/or getting whole records from the 2 different pl/sql arrays then , pls check this piece of code & explanation
    The SQL language has long offered the ability to apply set operations (UNION, INTERSECT, and MINUS) to the result sets of queries. In Oracle Database 10g, you can now use those same high-level, very powerful operators against nested tables (and only nested tables) in your PL/SQL programs and on nested tables declared as columns inside relational tables.
    Let's take a look at some of the syntax needed to do this, starting with UNION.
    First, I create a schema-level nested table type:
    CREATE OR REPLACE TYPE strings_nt
    IS TABLE OF VARCHAR2(100);
    Then I define a package and within it create and populate two nested tables of this type, each containing some of my father's and my favorite things:
    CREATE OR REPLACE PACKAGE favorites_pkg
    IS
    my_favorites strings_nt
    := strings_nt ('CHOCOLATE'
    , 'BRUSSEL SPROUTS'
    , 'SPIDER ROLL'
    dad_favorites strings_nt
    := strings_nt ('PICKLED HERRING
    , 'POTATOES'
    , 'PASTRAMI'
    , 'CHOCOLATE'
    PROCEDURE show_favorites (
    title_in IN VARCHAR2
    , favs_in IN strings_nt
    END;
    In this package, I also include a procedure to show the contents of a strings_nt nested table. This will come in very handy shortly.
    By defining these collections in a package, outside any program, they persist (they maintain their state and values) for the duration of my session or until I change or delete them. This means that I can now write programs outside the package to manipulate the contents of those collections.
    Note that this package has been simplified for the purposes of presenting collection functionality. In a production application, you should always take care to "hide" your package data, as with these collections, in the package body, and then provide procedures and functions to manage the data.
    Suppose, for example, that I would like to combine these two collections into a single collection of our favorites. Prior to Oracle Database 10g, I would have to write a loop that transfers the contents of one collection to another. Now, I can rely on the MULTISET UNION operator, as shown below:
    DECLARE
    our_favorites
    strings_nt := strings_nt ();
    BEGIN
    our_favorites :=
    favorites_pkg.my_favorites
    MULTISET UNION ---- Use INTERSECT , if you want to know common records
    favorites_pkg.dad_favorites;
    favorites_pkg.show_favorites (
    'ME then DAD', our_favorites);
    END;
    The output from this script is:
    ME then DAD
    1 = CHOCOLATE
    2 = BRUSSEL SPROUTS
    3 = SPIDER ROLL
    4 = PICKLED HERRING
    5 = POTATOES
    6 = PASTRAMI
    7 = CHOCOLATE
    ------------------------------

  • How can I copy and paste table cells from Pages into InDesign with minimum reformating?

    How can I copy and paste table cells from Pages into InDesign with minimum reformating?

    Do you mean you want to retain the formatting from Pages, or retain formatting already applied in ID?

  • How to link EKBE and MKPF tables

    HI all
    plz help me,
    how to link EKBE and MKPF tables
    thanks
    ramesh redddy

    HI,
    EKPO-EBELN =  EKKO-EBELN  has Purchase Documnet no.
    MSEG=MBLNR = MKPF-MBLNR  has material document no
    Link MSEG-EBELN =  EKPO-EBELN ( MSEG purchase prder no and EKPO purhcase document no.)
    and you should have to add one  more table MSEG which is provide three table.
    check this link
    EKPO-EBELN = EKKO-EBELN
    MSEG-EBELN =  EKPO-EBELN
    MSEG=MBLNR = MKPF-MBLNR
    regards,
    PK.

  • How to access RT and CRT tables

    Hi experts can any one guide me how to view RT and CRT Tables.
    How to access RT and CRT tables.
    Is there any Tcode existing to access these.
    Thanks in advance
    Regards
    vamsi.

    Hi Vamsi,
    1) You can use the function module : CU_READ_RGDIR
    In this function module you can pass PERNR and you can get SEQNR(Sequence No) or you can take the sequence no from any transparent table also.
    2)After getting the sequence NO Pass the employee NO and Sequence NO in the function module : PYXX_READ_PAYROLL_RESULT.
    From this function module you can get the RT,BTand CRT Table results.
    Thanks and Regards
    Partha

  • How to join ce_200_transactions_v and ce_statement_lines in Cash Management?

    Hi all ,
    how to join ce_200_transactions_v and ce_statement_lines in Cash Management?
    Please suggest.

    Did you check eTRM website? -- http://etrm.oracle.com/
    Thanks,
    Hussein

  • URGENT:HOW TO COMBINE CLUSTER AND TRANSPARENT TABLE..WITHOUT USING FOR ALL

    how can we join bkpf and bseg without using FOR ALL ENTRIES.HOW DO I COMBINE THE 2 TABLES SO THAT I GET BETTER PERFORMANCE.
    START-OF-SELECTION.
    SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
    WHERE bukrs = p_bukrs AND "COMPANY CODE
    gjahr = p_gjahr AND "FISCAL YEAR
    budat IN s_budat. "POSTING DATE IN DOC
    IF sy-subrc = 0.
    SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
    i_bseg FOR ALL ENTRIES IN i_bkpf
    WHERE bukrs = i_bkpf-bukrs AND "COMPANY CODE
    belnr = i_bkpf-belnr AND "A/CING DOC NO
    gjahr = i_bkpf-gjahr AND "FISCAL YEAR
    hkont = p_hkont. "General Ledger Account"
    IF sy-subrc = 0.
    SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
    i_bseg1 FOR ALL ENTRIES IN i_bseg
    WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
    belnr = i_bseg-belnr AND "A/CING DOC NO
    gjahr = i_bseg-gjahr. "FISCAL YEAR
    ENDIF.
    ENDIF.
    IF NOT i_bseg1[] IS INITIAL.
    LOOP AT i_bseg1.
    IF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'S'.
    v_sumgl = v_sumgl + i_bseg1-dmbtr.
    ELSEIF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'H'.
    v_sumgl = v_sumgl - i_bseg1-dmbtr.
    ELSEIF i_bseg1-hkont NE p_hkont .
    IF i_bseg1-shkzg = 'H'.
    i_bseg1-dmbtr = - i_bseg1-dmbtr.
    ENDIF.
    i_alv-hkont = i_bseg1-hkont.
    i_alv-dmbtr = i_bseg1-dmbtr.
    APPEND i_alv.
    v_sumoffset = v_sumoffset + i_bseg1-dmbtr.
    ENDIF.
    ENDLOOP.
    regards
    Essam.([email protected])

    Hi Friend,
      I see your code.. there is no other way than using for all entries for your situation.. how ever i saw ur code and a small recommandation in the change of code.
    SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
    WHERE bukrs = p_bukrs AND "COMPANY CODE
    gjahr = p_gjahr AND "FISCAL YEAR
    budat IN s_budat. "POSTING DATE IN DOC
    IF sy-subrc = 0.
    if not p_hkont is initial.
    SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
    i_bseg1 FOR ALL ENTRIES IN i_bkpf
    WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
    belnr = i_bseg-belnr AND "A/CING DOC NO
    gjahr = i_bseg-gjahr. "FISCAL YEAR
    ENDIF.
    i_bseg[] = i_bseg[]1.
    delete i_bseg where hkont ne p_hkont.
    else.
      Your existing logic...
    endif.
    In this way you can avoide writing two selects on bseg..
    Thanks
    Mahesh

  • Joining temporary and regular tables

    Can you create join between a temporary table and a permanent one?  I'm not sure how that would work. 

    You can join a temportary table to a permanent table like this:
    Specific to SSRS this will not supply a valid dataset in SSRS however.  If you add this as your query in your dataset in your report project:
    USE [tempdb]  
    CREATE TABLE #temp(  
    Col1    INT PRIMARY KEY,  
    nm      VARCHAR(100)  
    INSERT #temp 
    SELECT ContactID,  
           FirstName + ' ' + LastName AS nm  
    FROM AdventureWorks.Person.Contact   
    SELECT nm,  
           Col1,  
           LoginID  
    FROM #temp AS c JOIN 
    [AdventureWorks].[HumanResources].[Employee] AS e  
    ON c.Col1 = e.[ContactID]  
    DROP TABLE #temp 
    But if you attempt to use this as a datasource in a report project you will receive an error.
    Hope this helps

  • Joining OCRD and OCQG tables

    HI all,
    How can i link these two tables?
    OCRD and OCQG?
    Appreciate your advice.
    Thanks!

    Hi,
    By default, join condition exist on these two tables with GroupCode field.
    Regards,
    Vijay Kumar
    SAP Business One Forums Team

  • How to join BALDAT and BALHRD???

    I am working on the reorganization of the basis tables of SAP and need to analyze the table BALDAT (Application Logs). I would like to know what years the data is from, but therefore I need to do a join.
    But how to join these to tables? It can't be done directly...
    Can anyone help me? Does anyone know?

    Another question: Am I in the right forum for this problem? Or where could I ask such things? Better in the ABAP forums?

  • How to filter parent and child tables data in impdp?

    Hi Friends,
    i hope everyone doing good..
    I have two tables in my schema like below.
    STUDENT_DTLS:-
    SID Sname CID
    1     venkat     001
    2     uppy     002
    3     deepu     003
    4     trinath     003
    5     naveen     004
    6     ramesh     005
    COURSE_DTLS:-
    CID CNAME Fee
    001     Oracle     2000
    002     java     6000
    003     sieble     4000
    004     informatica     3000
    005     obiee 4000
    if I load only few Student details say sid=1,2,3 into another environment using impdp,corresponding to those students course details from COURSE_DTLS table only need to be loaded.Not all course details.
    Iam Expecting Result in new schema as below:-
    SID Sname CID
    1     venkat     001
    2     uppy     002
    3     deepu     003
    CID CNAME Fee
    001     Oracle     2000
    002     java     6000
    003     sieble     4000
    But when i am using the below import scrit,The COURSE_DTLS is loading first and its query option(select cid from STUDENT_DTLS) is returning no rows.Because at that time no data is insertred into STUDENT_DTLS yet.
    secondly it is importing data into STUDENT_DTLS with query option where sid=in (1,2,3) which is loaded propelry.
    Thirdly it is trying to enable primary key and Foreign key constraints which is also failing because of no data in COURSE_DTLS table.
    i have changed the order of tables in TABLES clause like tables=COURSE_DTLS ,STUDENT_DTLS.But still COURSE_DTLS table is loading first.
    impdp pa_data_sub/******* NETWORK_LINK=qdssih30 tables=STUDENT_DTLS,COURSE_DTLS query='STUDENT_DTLS:"where SID IN(1,2,3)"','COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS)"', CONTENT=all table_exists_action=replace directory=DATA_PUMP_DIR logfile=exp_join.log
    output:
    Total estimation using BLOCKS method: 128 KB
    Processing object type TABLE_EXPORT/TABLE/TABLE
    . . imported "PA_DATA_SUB"."COURSE_DTLS" 0 rows
    . . imported "PA_DATA_SUB"."STUDENT_DTLS" 3 rows
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    ORA-39083: Object type REF_CONSTRAINT failed to create with error:
    ORA-02298: cannot validate (PA_DATA_SUB.SYS_C0040905) - parent keys not found
    Failing sql is:
    ALTER TABLE "PA_DATA_SUB"."STUDENT_DTLS" ADD FOREIGN KEY ("CID") REFERENCES "PA_DATA_SUB"."COURSE_DTLS" ("CID") ENABLE
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    Job "PA_DATA_SUB"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 17:28:13
    Please suggest me how to achieve this task in a single import command?
    Is there any option in impdp to prioritize the table to be loaded first?
    Thanks,
    Venkat Vadlamudi

    You can't be guaranteed which order the data will be loaded in, so using a query that examines a table that is being imported is not going to always work the way you want it. The failing constraints makes sense because there is no data.
    So, in your case, course_dtls gets imported first and the table student-dtls exists, but it not populated yet, so the select cid from student_dtls comes back with 0 rows. The second query works fine.
    You might be able to change the query to be:
    'COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS@qdssih30 where SID IN(1,2,3)"'
    This way, you query the source table pointed to by the network link and you use the same subquery from the first table.
    This should work for you... I think anyway.
    Dean

  • How to identify fact and dimension tables

    Hi ,
    We are having the list of parent child relation info for each database tables. Based upon the parent child tables ,needs to identify which table is fact ,which table is dimension .Could you please help me how to identify the fact table and dimensions tables ?
    Thanks in advance

    Hi,
    Refer this link........
    http://www.oraclebidwh.com/2007/12/fact-dimension-tables-in-obiee/
    Please mark if it helps you.......

Maybe you are looking for