How to link EKBE and MKPF tables
HI all
plz help me,
how to link EKBE and MKPF tables
thanks
ramesh redddy
HI,
EKPO-EBELN = EKKO-EBELN has Purchase Documnet no.
MSEG=MBLNR = MKPF-MBLNR has material document no
Link MSEG-EBELN = EKPO-EBELN ( MSEG purchase prder no and EKPO purhcase document no.)
and you should have to add one more table MSEG which is provide three table.
check this link
EKPO-EBELN = EKKO-EBELN
MSEG-EBELN = EKPO-EBELN
MSEG=MBLNR = MKPF-MBLNR
regards,
PK.
Similar Messages
-
How to link T001 AND T001W Tables
Hi Experts,
I have t001-burks, how do i get t001w-werks, I need link between two tables.
Thanks,
maheYou can access T001K by BUKRS. Take T001K-BWKEY and with it you can read T001W with T001W-BWKEY = T001K-BWKEY. Then you can take T001W-WERKS.
Note: With this method you can obtain more than one WERKS for one BUKRS.
Hope it helps!
Edited by: Gastón Jareño on Aug 6, 2010 1:32 PM -
How to link vbak and vbrp tables
hi friends,
i want to display lips table values based on lips-vbeln = it_vbrp-vgbel
here i want a filed thru which i can link vbrp-<fieldname> to vbak/vbap-vbeln
so that i can get values into it_vbrp.
here is equation.
it_vbrp => vbak-vbeln = vbrp-< ? >
it_lips => vbrp-vgbel = lips-vbeln.
thanks in advance for your co operation
regards,
Anil kumar pu can reach vbrp vbeln from vbrk vbeln
and to get vbrk vbeln from vbak vbeln
goto table VBFA
1.
GIVE VBFA-VBELV = VBAK-VBELN
and
VBFA-VBTYP_N = 'M'. "INVOICE IN CAPS
AND F8
THIS WILL GIVE U VBRK-VBELN .
NOW U CAN USE VBRK-VBELN TO FETCH VBRP
SIMILARLY
2.
IF U WANT TO PICK DELIVERY NUMBER FROM LIKP USING VBAK-VBELN.
SAME PPROCEDURE
PUT VBFA -VBELV = VBAK-VBELN
VBFA-VBTYP_N = ' J'. "IN CAPS
WILL FETCH U LIKP-VBELN "DELIVERY
USE THIS TO GET LIPS ENTRIES
hope this helps
regards,
vijay -
How to link parent and child relation in Metapedia
How to link parent and child relation in Metapedia
Vamsi,
Did you every determine how to do what you were asking about? Where you thinking of how to link a parent term to a child term (i.e. like a related term) or was this about linking a term to a different metadata object (e.g. table or report) ? -
Select Query info req for ZMKPFMSEG: View of MSEG and MKPF table
Hi
I am fetching 7-8 records frm ZMKPFMSEG: View of MSEG and MKPF table,which based on matnr,werks & budut,which is taking a large time,there is no index in the table,so can nay one tell me how to fetch the data,to make code more effictient.
SELECT budat
matnr
menge
bwart
meins
bwtar
waers
dmbtr
shkzg
matkl
FROM zmkpfmseg
INTO CORRESPONDING FIELDS OF TABLE it_mseg
WHERE budat GE r_ytd-low
AND matnr IN so_matnr
AND werks = p_werks
AND lgort IN so_lgort
AND matkl IN so_matkl.
plz tell me what changes have to be done in where condtion to make it run fast.
regdsHi,
Try the alternate Methods,
ACCESS VIA SUBQUERY.
SELECT * FROM MKPF AS M INTO CORRESPONDING FIELDS OF SWAP
WHERE BUDAT IN BUDAT AND
MBLNR IN MBLNR AND
VGART = 'WA' AND
EXISTS ( SELECT * FROM MSEG
WHERE MBLNR = M~MBLNR
AND MJAHR = M~MJAHR
AND WERKS = P_WERKS
AND matnr IN so_matnr
AND lgort IN so_lgort
AND matkl IN so_matkl.
APPEND SWAP.CLEAR SWAP.
ENDSELECT.
LOOP AT SWAP.
SELECT * FROM MSEG
WHERE MBLNR = SWAP-MBLNR AND
MJAHR = SWAP-MJAHR AND
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING SWAP TO ITAB.
MOVE-CORRESPONDING MSEG TO ITAB.
APPEND ITAB.CLEAR ITAB.
CLEAR MSEG.
ENDIF.
ENDSELECT.
CLEAR : SWAP,ITAB.
ENDLOOP.
Try this,
SELECT budat
matnr
menge
bwart
meins
bwtar
waers
dmbtr
shkzg
matkl
FROM zmkpfmseg
INTO CORRESPONDING FIELDS OF TABLE it_mseg
WHERE budat GE r_ytd-low
AND matnr IN so_matnr
AND lgort IN so_lgort
AND matkl IN so_matkl.
delete it_mseg where WERKS NE p_WERKS .
Reward Points if helpful.
Regards,
Balakumar.G -
How can I copy and paste table cells from Pages into InDesign with minimum reformating?
How can I copy and paste table cells from Pages into InDesign with minimum reformating?
Do you mean you want to retain the formatting from Pages, or retain formatting already applied in ID?
-
Hi Gurus,
Please help me in linking PO and AP tables for scenarios like to get the fully/ partially invoiced PO receipts.
Thanks in advance
AvinashHi, you can link AP and PO tables in this way: please consider for the AP side table AP_INVOICE_DISTRIBUTIONS_ALL, where you will find all Invoices' distributions. In this table there is a field called PO_DISTRIBUTION_ID that is the right link to PO.
Hope this helps
Regards
Riccardo -
How to access RT and CRT tables
Hi experts can any one guide me how to view RT and CRT Tables.
How to access RT and CRT tables.
Is there any Tcode existing to access these.
Thanks in advance
Regards
vamsi.Hi Vamsi,
1) You can use the function module : CU_READ_RGDIR
In this function module you can pass PERNR and you can get SEQNR(Sequence No) or you can take the sequence no from any transparent table also.
2)After getting the sequence NO Pass the employee NO and Sequence NO in the function module : PYXX_READ_PAYROLL_RESULT.
From this function module you can get the RT,BTand CRT Table results.
Thanks and Regards
Partha -
How to filter parent and child tables data in impdp?
Hi Friends,
i hope everyone doing good..
I have two tables in my schema like below.
STUDENT_DTLS:-
SID Sname CID
1 venkat 001
2 uppy 002
3 deepu 003
4 trinath 003
5 naveen 004
6 ramesh 005
COURSE_DTLS:-
CID CNAME Fee
001 Oracle 2000
002 java 6000
003 sieble 4000
004 informatica 3000
005 obiee 4000
if I load only few Student details say sid=1,2,3 into another environment using impdp,corresponding to those students course details from COURSE_DTLS table only need to be loaded.Not all course details.
Iam Expecting Result in new schema as below:-
SID Sname CID
1 venkat 001
2 uppy 002
3 deepu 003
CID CNAME Fee
001 Oracle 2000
002 java 6000
003 sieble 4000
But when i am using the below import scrit,The COURSE_DTLS is loading first and its query option(select cid from STUDENT_DTLS) is returning no rows.Because at that time no data is insertred into STUDENT_DTLS yet.
secondly it is importing data into STUDENT_DTLS with query option where sid=in (1,2,3) which is loaded propelry.
Thirdly it is trying to enable primary key and Foreign key constraints which is also failing because of no data in COURSE_DTLS table.
i have changed the order of tables in TABLES clause like tables=COURSE_DTLS ,STUDENT_DTLS.But still COURSE_DTLS table is loading first.
impdp pa_data_sub/******* NETWORK_LINK=qdssih30 tables=STUDENT_DTLS,COURSE_DTLS query='STUDENT_DTLS:"where SID IN(1,2,3)"','COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS)"', CONTENT=all table_exists_action=replace directory=DATA_PUMP_DIR logfile=exp_join.log
output:
Total estimation using BLOCKS method: 128 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
. . imported "PA_DATA_SUB"."COURSE_DTLS" 0 rows
. . imported "PA_DATA_SUB"."STUDENT_DTLS" 3 rows
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-02298: cannot validate (PA_DATA_SUB.SYS_C0040905) - parent keys not found
Failing sql is:
ALTER TABLE "PA_DATA_SUB"."STUDENT_DTLS" ADD FOREIGN KEY ("CID") REFERENCES "PA_DATA_SUB"."COURSE_DTLS" ("CID") ENABLE
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "PA_DATA_SUB"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 17:28:13
Please suggest me how to achieve this task in a single import command?
Is there any option in impdp to prioritize the table to be loaded first?
Thanks,
Venkat VadlamudiYou can't be guaranteed which order the data will be loaded in, so using a query that examines a table that is being imported is not going to always work the way you want it. The failing constraints makes sense because there is no data.
So, in your case, course_dtls gets imported first and the table student-dtls exists, but it not populated yet, so the select cid from student_dtls comes back with 0 rows. The second query works fine.
You might be able to change the query to be:
'COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS@qdssih30 where SID IN(1,2,3)"'
This way, you query the source table pointed to by the network link and you use the same subquery from the first table.
This should work for you... I think anyway.
Dean -
How to identify fact and dimension tables
Hi ,
We are having the list of parent child relation info for each database tables. Based upon the parent child tables ,needs to identify which table is fact ,which table is dimension .Could you please help me how to identify the fact table and dimensions tables ?
Thanks in advanceHi,
Refer this link........
http://www.oraclebidwh.com/2007/12/fact-dimension-tables-in-obiee/
Please mark if it helps you....... -
How to link CRMD_ORDERADM_H and CRMD_ORDERADM_I
Hi,
I am new to CRM and I am not sure how to use the two tables CRMD_ORDERADM_H and CRMD_ORDERADM_I. What is the relation between the two tables? Can i use the GUID in CRMD_ORDERADM_H to get details from CRMD_ORDERADM_I? I am not sure how to link the two tables. I need to derive the confirmation number in a report that I am developing but the two tables are confusing me. Please help me with this.Hi,
CRMD_ORDERADM_H gives header details of a transaction number(like service contract number, sales order number etc) and CRMD_ORDERADM_I gives item details.
Yes,both are linked by GUID.
Enter the transaction number in OBJECT_ID input filed in CRMD_ORDERADM_H and copy the GUID.
Then enter the copied GUID in HEADER field in CRMD_ORDERADM_I to get item details.
You can also use function module CRM_ORDER_READ to obtain all the information regarding a transaction number.
Regards
Anitha -
URGENT:HOW TO COMBINE CLUSTER AND TRANSPARENT TABLE..WITHOUT USING FOR ALL
how can we join bkpf and bseg without using FOR ALL ENTRIES.HOW DO I COMBINE THE 2 TABLES SO THAT I GET BETTER PERFORMANCE.
START-OF-SELECTION.
SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
WHERE bukrs = p_bukrs AND "COMPANY CODE
gjahr = p_gjahr AND "FISCAL YEAR
budat IN s_budat. "POSTING DATE IN DOC
IF sy-subrc = 0.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg FOR ALL ENTRIES IN i_bkpf
WHERE bukrs = i_bkpf-bukrs AND "COMPANY CODE
belnr = i_bkpf-belnr AND "A/CING DOC NO
gjahr = i_bkpf-gjahr AND "FISCAL YEAR
hkont = p_hkont. "General Ledger Account"
IF sy-subrc = 0.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg1 FOR ALL ENTRIES IN i_bseg
WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
belnr = i_bseg-belnr AND "A/CING DOC NO
gjahr = i_bseg-gjahr. "FISCAL YEAR
ENDIF.
ENDIF.
IF NOT i_bseg1[] IS INITIAL.
LOOP AT i_bseg1.
IF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'S'.
v_sumgl = v_sumgl + i_bseg1-dmbtr.
ELSEIF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'H'.
v_sumgl = v_sumgl - i_bseg1-dmbtr.
ELSEIF i_bseg1-hkont NE p_hkont .
IF i_bseg1-shkzg = 'H'.
i_bseg1-dmbtr = - i_bseg1-dmbtr.
ENDIF.
i_alv-hkont = i_bseg1-hkont.
i_alv-dmbtr = i_bseg1-dmbtr.
APPEND i_alv.
v_sumoffset = v_sumoffset + i_bseg1-dmbtr.
ENDIF.
ENDLOOP.
regards
Essam.([email protected])Hi Friend,
I see your code.. there is no other way than using for all entries for your situation.. how ever i saw ur code and a small recommandation in the change of code.
SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
WHERE bukrs = p_bukrs AND "COMPANY CODE
gjahr = p_gjahr AND "FISCAL YEAR
budat IN s_budat. "POSTING DATE IN DOC
IF sy-subrc = 0.
if not p_hkont is initial.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg1 FOR ALL ENTRIES IN i_bkpf
WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
belnr = i_bseg-belnr AND "A/CING DOC NO
gjahr = i_bseg-gjahr. "FISCAL YEAR
ENDIF.
i_bseg[] = i_bseg[]1.
delete i_bseg where hkont ne p_hkont.
else.
Your existing logic...
endif.
In this way you can avoide writing two selects on bseg..
Thanks
Mahesh -
How to link to and open external document with Mac Dreamweaver
I'm evaluating Dreamweaver on the Mac. I know how to link to
an external document, such as a Word or Excel document. However, I
would like for the file to automatically open when the link is
clicked, rather than taking me to a directory window (where I then
have to double-click the file icon). Another option would be to
easily import data from a Word or Excel document, but the Help
indicates that's only possible when using Dreamweaver on Windows.
Thanks for any guidance you can provide.What you need to do is this:
1.) back up all your data from your iPod
2.) reformat it on the Windows machine.
You'll then be able to use your iPod on both Windows and Mac:) If you need more help, let me know! -
How to design fact and dimension tables
Hi Team,
Please provide me some useful links!!
I have a Parent & Child table each has around 8 Million records (1 to many relation). These two tables need relation with many other master tables to generate any report.
I want to desing a fact and dimension(s) for this parent & Child tables.
Please help me what are the things I have to keep in mind when desingning datawarehouse fact and dimension tables?
Thanks,
AliHi, any update on this?
-
Can please tell me how to implement expand and collapse table row data?
i am trying implement expand and collapse table row data but i do not get any ideas..can please any one help me its an urgent requirement
Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!
Maybe you are looking for
-
FTP File Adapter: more Archive Directory
Hello everybody, i have some interfaces whit FTP-XI-Idoc scenarion. we decided to save files after elaboration in different directory depending on month (yy-mm). Example: /Rxarchivio/0901 /Rxarchivio/0902 I see this link https://wiki.sdn.sap.com/wiki
-
How to reload embedded oc4j in JDeveloper without terminating it?
To the experienced: Using JDeveloper (10.1.3.4), when I need to see the effect of my changes in the application code (in the backing beans), the only way I know is to terminate the embedded oc4j by clicking the red square button (or Run > Terminate >
-
PO status - Transaction completed
Hi Experts, I have the following scenario: I am checking which PO's are not fully receipted, and I have found some examples of PO's that are not fully receipted but the status is "Transaction Completed". I am trying to understand how is a PO flagged
-
Hi Experts, I am new to obiee can you any one explain how to give data level security if we use LDAP authentication it would be great help for me. thanks in advance. reg, jell
-
Bare Window Manager (ex-MMWM)
Working at this for a day now. Basically it's a full screen window manager aimed to those who spend their day cycling through windows instead of having 10 onscreen at a time. It's a dumbed down version of Ratpoison's default behaviour (really dumbed