How to keep f4 help in module pool-urgent

hi,
i have one doubt.
in my screen '101' i have one field. for this i have to keep f4 help. when i press f4 help it has to show 02 only in f4 help screen . can you please tell me what shall i do this case.
thnaks,
maheedhar.t

hi
chk this thread
Re: HOW to ADD F4 help to a field on SCREEN (MODULE POOL)
chk sudheer's post, which says
In the Layout, Just double click on the field, then Attributes pop up will open, there we have an option to enter the F4 help(a Check box) there itself, even you can give the Data element then the F4 help will come automatically. or else, you can give the Search help in the attributes screen, then the F4 will come automatically
**reward if helpful
regards,
madhu

Similar Messages

How to Use F4 help in Module Pool Programming??????

Hi Friends,
This is Jagadeesh, I have an issue Module Pool Programming. Any of you can go through on this and can give an required answer.
Issue is as follows,
I have an Input/Output field for that i need to give f4 help, based on that field the related data should sit in to my table control. The thing is there is no relation between the input/output field and the table control fields.
Is this possible? If so how can i do this.

Hi Jagadeesh,
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
regards,
Dj
reward for all useful answers.

F4 Help in Module pool and restricting the entries

Hi all,
      I was looking how to give F4 help in module pool program and restrict the number of entries on tht event.
Take a example of VBELN, it is having number of entries so for F4 help we first take all the entries for VBAK for VBELN and then use FM 'F4IF_INT_TABLE_VALUE_REQUEST' and pass the table.
So how can we restrict number of entries initially 200 and then user can input number of hits.
( How to use Callback subroutin ).
   Waiting for valuable additions.
Thanks,
Anmol.

Hi ,
    This is my query, I want to restrict the number of entries fetched by the search help depending on the user input like in standard help.
Like VBELN is having number of records how can we asign a help to field like VBELN( for example ), is there any way to restrict the entries on search help rather than selection all the entries for tht field from database which is not good for performance. Like initially it should fetch 100 or 200 records, then if user want more entries to be fetch he can input the number of entries like in standard help. Any idea on this.
Thanks,
Anmol.

How to keep f4 help for a particular field in module pool problem-urgent

hi all,
i am displaying output using alv list display. here i am showing my pf status here. in this status i have one button called position. when i click this button it is showing pop up inside this pop up i am showing appln
for this i need keep f4 help. anybody can tell me how to keep f4 help fo this field.
thanks,
maheedhar.t

Hi Maheedhar,
You need to use function module POPUP_GET_VALUES.
If you want see sampl eprogram for this check the program RSSPO410.
Execute this program and input Example2 = X in the selection screen.
Code from the above Program:
DATA: BEGIN OF FIELDS OCCURS 1.
        INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS,
      RETURNCODE(1)       TYPE C,
      POPUP_TITLE(30)     TYPE C.
POPUP_TITLE       = 'Nachrichten anzeigen'(200).
CLEAR FIELDS.
FIELDS-TABNAME    = 'T100'.
FIELDS-FIELDNAME = 'ARBGB'.
FIELDS-FIELDTEXT = 'Arbeitsgebiet'(202). "Text nicht aus DTEL
APPEND FIELDS.
CALL FUNCTION 'POPUP_GET_VALUES'
       EXPORTING POPUP_TITLE     = POPUP_TITLE
       IMPORTING RETURNCODE      = RETURNCODE
       TABLES    FIELDS          = FIELDS.
IF RETURNCODE = 'A'.
    If Cancel is clicked
ELSE.
    If OK is clicked.
    Table FIELDS congtains the input data.
ENDIF.
Thank you
Ramakrishna

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

How to save Custom control records module pool program ?

Hi guru ,
1. How to save Custom control records module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi Subasha,
Please check the format below since it is based on a working code
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
You should create a text for uniquely identifying the text you are saving each time so that it doesn't get overwritten
For this a key combination must be decidedd to uniquely identify the test..here it is loc_nam
****************fill header..from SO10( t-code )
GW_THEAD-TDNAME = loc_nam. " unique key for the text
GW_THEAD-TDID = 'ST'. " Text ID
GW_THEAD-TDSPRAS = SY-LANGU.
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created
*Read Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
The code shown above is ok and working fine for save also,hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

How many screens are there in module pool

hi gurus
can anyone suggest me
how many screens are there in module pool
thank you
regards
kals.

see this link for better understanding of dialog programming/module pool programming.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ce935c111d1829f0000e829fbfe/content.htm
see this
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Regards.
Chandru

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

How to populate list box in module pool program

How to populate list box in module pool program.
Please give me reply as soon as posible
regards,
Venu.

hi,
go thrugh the folling code .
TABLES sdyn_conn.
DATA   ok_code TYPE sy-ucomm.
Global data
TYPES: BEGIN OF type_carrid,
         carrid type spfli-carrid,
         carrname type scarr-carrname,
       END OF type_carrid.
DATA itab_carrid TYPE STANDARD TABLE OF type_carrid.
*& Processing Blocks called by the Runtime Environment                 *
Event Block START-OF-SELECTION
START-OF-SELECTION.
CALL SCREEN 100.
Dialog Module PBO
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
Dialog Modules PAI
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
Dialog Module POV
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
the following code should be included in flow logic of screen
process on value-request.
field scarr-carrname module create_dropdown_box.
in module pool select list box.
hope it is useful.
regards,
sreelakshmi.

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

HOw to find Report program associated module pool program?

HOw to find Report program associated module pool program?
I.e
Me21n is the tcode.I want to find screens related to this tcode.
Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
(if module program is attached to tcode,i can easily find entries in d020s)
Here report program is calling a module pool program SAPLMEGUI(Has screens).
If i give the Tcode Me21n,i want to list out all the screens of it..
Can u give any suggestion....

Hi Sampath.
Manually i can see it (by seeing in system-status)..
programmatically i want to know..
for ex:if u take Tcode:Va01
we can get program (dialog) and tcode in Tstc table .
If we know the program name(dialog), we can find program and screens in d020s table.
Va01 is atatched to a module pool program..No problem to find screens..
In case of me21n,
It is atatched to report program(calling module pool program)..
Here i could not be able to get the screens ..
I think u undrstood my problem..

How to save a varaints in module pool programming

Hi All,
How to save a varaints in module pool programming.
Thanks in Advance.
GS.

Hi,
Forgot my previous reply.
Just now I checked.
Create transaction[say.,zzz_test1] using SE93 [choose the option Program and screen] for your module pool program.
Then use SHDS transaction to create a variant[say zzz_v1] for the transaction you created above.
Then use SE93 [choose the option Transaction with Variant] to create another transaction zzz_test2 by mentioning the module pool program name and zzz_test1 transaction which you created and zzz_v1 variant which you created.
Then if you run the transaction ZZZ_test2,then you can see the variant values.
I created just now all these and it works.
Hope this is clear.
If not,get back.

How to cal selection screen in module pool

Hi abapers,
I have to use selection screen in module pool programme..How to call selection screen in module pool.
Regards,
ramya

YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                      NO INTERVALS.
    SELECT-OPTIONS SEL1 FOR SY-SUBRC.
    PARAMETERS     PAR1 LIKE SPFLI-CARRID.
    SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN END OF SCREEN 123.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF SCREEN 99.
SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                   USER-COMMAND US01.
SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
PARAMETERS     PAR2 TYPE I.
SELECTION-SCREEN END OF SCREEN 99.
THEN YOU HAVE TO CALL THAT
CALL SELECTION-SCREEN scr.
AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
CALL SCREEN..
REGARDS
SHIBA DUTTA

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to download and upload a module pool program ?

hi i am a sudent.can anyone suggest me how to download and upload a module pool program?
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 29, 2011 12:45 PM

Hi,
You cannot just download and upload module pool programs .
There are 2 different ways.
1. Copy all the includes and and create the same in the target system. You can download and upload the the Screen.
But GUI status you have to manually create.
2. If you have completely saved the module-pool program in one Workbench request(including Z tables u have used) in the original system ,just release the workbench request and copy the data file and co file and upload to the target system ( use CG3Y & CG3Z).
If the workbench is a Local Request save it in a Transport of copies and then move.
Regards
Aromal R

How to keep f4 help in module pool-urgent

Similar Messages

Maybe you are looking for