How to keep the whole page open during browsing

I am trying to work out how to keep the whole page open in Safari i.e. the top most line with the Apple logo, file, edit, view etc. whilst browsing.  What is the setting to achieve this ?  Since installing Yosemite my MBP 2011 with SSD is behaving oddly at times. Where is the "back" when in Support Communities or is going into the history tab the only way ?
thanks

When in the ASC pages, my method involves opening separate windows.
So I can go back to the reference page from where I first visited a thread.
Also, pages open faster at times into a new window instead of a tab. As
my setup has a bit more display than necessary, a few extra windows are
easier than a bunch of tabs in one frame that have no point of reference.
Plus, if I wish to copy/paste or drag into another window, or access extra
content for the sake of reference, I have that; & may use another browser.
For some content, different browsers may be a preference. I'm used to more
than two, and one of three becomes more dedicated to things like web mail.
There may be some options in launchpad items, such as they are.
Mission Control can access other hidden windows. There's a short
cut for Full Screen that when used again, reverts to previous size.
Not sure if this gets near your question, but thought I'd put it out here anyway.
edited

Similar Messages

  • How to keep a "front panel" open during another sequence?

    Hello everybody,
    I'm new on the TestStand forum and I have a question for my project.
    I need to make a test sequence with several sub-steps: Barcode reading, Data reading, Data analysis etc... and all these steps in a "For" or "Do... while" loop under TestStand.
    Before doing the loop, I want to create a "global HMI" step using labview, with on the front panel, the status of each sub-steps. I need to update the status of each sub-step after their execution. 
    The sequence TS is:
    Step Action Labview: HMI.vi (display front panel when calling vi)
    Loop for
    Barcode reading
    Data reading
    Data analysis...
    That's why I need to keep the front panel of "HMI.vi" always open to updated /display the status of each sub-step. (something like colors of a LED). I doner 't want to call the HMI.vi after each sub-step.
    I understood it's a multi-threading process and the reference of HMI.vi should always be active during all the "for loop", but I don't how to keepthe reference.
    Could you please kindly show me how to do it under TestStand (verstion 4.1) with LV (7.1).
    Many thanks in advance, 

    Hi zuzu,
    A UIMessage is typically used as a method to alert and pass information from your sequence or code modules to the User Interface. 
    For a good discussion on this, refer to the section titled "Communication from the Test to the User Interface" here:
    Developer Zone Tutorial: Best Practices for NI TestStand User Interface Development
    However, you can register a callback to listen for these UIMessages in other parts of your code besides the UI as well. That's what we are doing in this case with the floating panel.
    So basically, in your "Update HMI" step, you would post a UIMessage using RunState.Thread.PostUIMessage.
    This posts the UIMessage, and you can pass whatever value you want from  the "Update HMI" step to the HMI.vi.
    For information on the function call, refer to:
    NI TestStand Help: Thread.PostUIMessage
    In this case, we are sending a UIMessage with message code 10200, along with 2 pieces of data, Locals.Progress (a numeric) and "TestProcedure" (a string).
    Typically, you can pass a Number, a String, a Boolean and a Variant with each UI Message. If you need to send multiple pieces of data of the same type (your second question), then you should bundle them together into an array or cluster (container) and pass it via the ActiveX parameter.
    See the following forum posts for more details:
    reference a numeric array in PostUIMessageEX
    HOW To pass more than one numeric data with ActiveX postUIMessage
    Jervin Justin
    NI TestStand Product Manager

  • How to keep the Viewer window active during cutting and inserting to timeline?

    Greetings all, I'm a football coach looking to use FCP to do my film breakdowns.  Been learning as much as I can about FCP and I've done some trial runs, so far so good, though it's a bit slow going since I am a football coach after all .  Anyhow, current issue is I want to be able to take a game film and cut it up into plays, each play is a separate clip.  I'm getting it to go fairly quickly, I have the film open in the Viewer, just mark in and out and I've been dragging the clip down to the timeline, one after the other, using the insert option.  I'm now trying to use the F9 key to have it insert to timeline without me having to drag it.  It works except the problem is that once the clip is inserted to the timeline, the Canvas window becomes the active one rather than the Viewer.  So if I keep hitting 'I' and 'O' and F9, it won't be cutting up the film since the Viewer isn't active.  As it is now I'll need to remember to click the mouse in the Viewer window after each insert in order to have that active and be able to resume my I,O,F9 routine.  Is there a way around this?  It seems like a small issue but I can't find any support on it and it could end up being a massive headache where one little slip up means a lot of wasted time.  Am I explaining this clearly and does anyone have a solution?  Any other thoughts on football video editing that people are curious about or have seen that might be helpful?  I appreciate your time,
           Grouch

    Or a third way would be (if you only cut out small pieces of the overall footage):
    Drag the whole clip in to the timeline. Mark in and out for the parts that you DON'T want.
    Hit the Delete button (if you have an extended keyboard or Shift-Backspace, if you are using a Macbook (Pro).
    Rienk

  • Make the whole page fit to browser width

    Hey Everyone,
    I am making a site for a friend and for the life of me I cannot make the entire site fit to browser width - you can see the homepage here - http://www.dmofilms.com/blacklabelweddingfilmsTEST/
    All I want is the entire site to always fit the screen. I have looked up the header/footer tutorial and read another thread on this but still cannot figure it out.
    Any suggestions?
    Thanks so much!
    -Matt

    Hey Matt,
    I am not sure what you are wanting? Do you want to know how to get the header and footer to fill the width of the browser screen? I am getting horizontal scroll when I veiw your site on my macbook so I am guessing you are making your website quite wide.
    I am guessing your header and footer have a really large width because you want that style to span the width of all browser.
    Here is what you might want to try. I notice you have a center graphic for your header and footer, then it fades to black with a white line going across. You will need to separate that center graphic from the black banner with the white line. Then save that black banner as a png, make it so it will tile seemlessly horizontally. Then use the box tool and make a rectangle that connects to the ends of the canvas area on Muse in the header and footer. Now you will bring both center graphic for you header and footer and place them over top of the seemless banner. This will allow your header and footer to span width.
    Before you do that though you will want to make your canvas area smaller, 960px is still pretty common for websites.
    I hope that helps.
    PS. Your site looks very well done so far. When you finish I would recommend submitting it to 'site of the day'.

  • How do I keep the find bar open when scrolling through multiple tabs?

    The newest update of Firefox doesn't allow me to keep the find bar open when shifting through multiple tabs. I've tried Findbar tweak however that erases the search criteria as soon as I try to scroll down the page to the next location. Anyone know how to keep the find bar open when i shift from one tab to the next?

    There is a more up-to-date "beta" version of FindBar Tweak you could try, if you haven't tested it already. You can find it on the extension's "Versions" page here:
    https://addons.mozilla.org/firefox/addon/findbar-tweak/versions/
    I did see one other extension with a similar purpose (I haven't tried it myself):
    https://addons.mozilla.org/firefox/addon/globalfindbar/

  • I am exporting a Pages document to Epub and Pages is compressing my jpg images.  How do I keep the original jpg size during the export to epub process?

    I am exporting a Pages document to Epub and Pages is compressing my jpg images (I think to 72 dpi from original 600 dpi). 
    How do I keep the original jpg size during the export to epub process?

    We are still trying learn how to use Pages to build ePub documents with high resolution graphics that will expand clearly when they are tapped. Very large screen shots are my example here.

  • Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen.  How can I get adobe reader to just display on one screen?

    adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen.  How can I get adobe reader to just display on one screen?
    I want the capability of adobe reader to just run on one screen.

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • When I AirPrint it only does small portions of the page. How do I get it to print the whole page?

    When I AirPrint The printer only prints a portion of the page.  How do I get it to print the whole page.

    It would help if you stated what printer you are using and what application you are doing the printing from. Also, what are you printing?

  • All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

    I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

    I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
    This is very irritating !! If I wanted Yahoo I would ask for it !

  • How to change the initial page without open safari

    Hi everybody,
    I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
    i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
    thx
    cheers
    nun

    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.Safari.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How do i get my image to fill the whole page in pages

    I am making an epub book and would like the image on my cover page to fill the whol page without the large white borders around it. How can I do that in pages. I know you can't export a document as an epub if it has floating objects in it but i don;t know if thats a problem for this application or not. Thanks

    Menu > File > Page Setup > create a custom paper size of 9" x 13.5" > set all margins to 0 > Format > Any Printer > OK
    Create your custom cover as a jpeg and crop to 9" x 13.5" or proportional pixel equivalent.
    Import your cover onto the first page of your ebook.
    Inspector > Wrap > Object Placement > Inline...
    Stretch cover image to fill the page.
    Menu > File > Export > ePub > Use first page as book cover image
    Haven't tried this myself, but this is what is recommended.
    Peter

  • How to display the search result without reloading the whole page

    HI,
    I have separate fragments for Search Box to enter keyword and Search Result to display the result. Also I have different sections within the page to put these fragments. So how could I display the results without reloading the whole page.
    Also if I have next button in my search result area, how could I display the search results in next page without reloading all other sections present in our page. Please let me know if any service or idoc function present such that result could be shown in search result section without reloading whole page.
    Please let me know how to restrict page reload for every action within a page.
    Thanks,
    Ramesh
    Edited by: Ramesh_Est on May 27, 2010 3:14 AM
    Edited by: Ramesh_Est on May 27, 2010 8:39 PM

    This is default behaviour of the template of your space. You can create a new page template and than you can create a region for the search results.
    Or you can create a custom taskflow were you use the webcenter taskflows to search for the space.
    Take a look at this white paper:
    Extending webcenter spaces: http://www.oracle.com/technology/products/webcenter/pdf/owcs_r11_extend_spaces_wp.pdf
    and this one:
    Customizing site templates: http://www.oracle.com/technology/products/webcenter/pdf/owcs_ps1_site_template_wp.pdf
    Edited by: Yannick.O on 13-Apr-2010 02:32

  • How do I keep the command window open?

    I want to write a batch file that will leave the window open after running so I can see what the output is.
    I kind of remember having to use %k
    But I'm not sure exactly how to do it.
    UPDATE: I found what I was looking for, it's /k when you execute the command file.
    If anyone has any additional comments about scripting and keeping the command window open, please comment.

    Add "pause" to the end of the batch.
    ¯\_(ツ)_/¯

  • How do I keep the source document open when linking to a target document using the destination option in Adobe X?

    How do I keep the source document open when linking to a target document using the destination option in Adobe X? Have several links to create in the source document and want to keep the source document and target document open at the same time.

    Go to Edit - Preferences - Documents and un-tick "Open cross-document links
    in the same window".

  • How to keep the data entered on a page apex

    how to keep the data entered on a page apex
    so, I've got a registration page then wish go to another page P2 and I return to this P1 without losing data

    Hi,
    As long as the registration page is within the same session, the values will remain in the session until they are specifically cleared out. This can be done by a process on a page - so check if you have a "reset page" process on P1 and, if you do, delete it. This can also be done on a branch - so check the branch that takes you to P2 and see if there is anything entered in the Clear Cache setting and, if it shows *1*, remove that. There are other ways as well, but these are most typical.
    Andy

Maybe you are looking for