How to kick guest user when user quota has exhausted

Hi,
I have wlc and acs v4.0. Currently, I am using layer 3 security with web authentication and has been succesfully integrated with ACS for authentication. User quota has been set so that when user has reached its quota, may not be able to log in again. But problem occurs when the user has not logged out, it still can connect to network although its account at ACS shows disabled because of its quota limitation. So, is it a way to kick the user out, when the user has reached its quota ?
Radius accounting has been properly set. and AAA override has been set on appropriate wlan ssid.
Regards,
Suwandy

thanks for your reply.
do you mean "allow AAA override" ? If so, I have tried it and it works for changing user session by radius server. But the problem is, radius server do not send the user-session parameter dynamically. How can the radius send/calculate the remaining session time to wlc ?

Similar Messages

How to make session invalid when user refresh the page?

How to make session invalid when user refresh the page?

I have a <form> in a JSP file that has another JSP file as an action.
I have main.jsp that has <form> with action.jsp file as an action.
Now when I submit the <form>, request forwarded to action.jsp and it will take the action. But this file is taking so long, hence user refresh the page again and again, hence duplicate request processing is occuring.
I want to prevent this.

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to initiate some action when user clicks a field in CRViewer?

ReportObjects doesn't expose click event despite the fact that a field can get focus frame, you can even tab from field to field. Drill() event works only on group names.So, how to initiate some action (based on a clicked field value) when user clicks a field in CRViewer?After doing some googling, have found that something similar exists but it's FoxPro APIFrom some PDF: > Report objects events > Report object events occur when you click or double-click a field, > heading, or label in a report. > Doing this creates the EventInfo object. This object contains > information about the event and > passes as a parameter to the event method. Table 3 lists the> EventInfo object properties.......

The article you found refers to the ActiveX viewer which is used with the COM-based tool called Report Designer Component.Â Since you have posted to the .NET forum, I'm assuming you're not using the RDC and therefore this article will not apply.
Recently, Click events were added to the Windows Form Viewer to get similar functionality as the ActiveX viewer.Â Take a look at the following link for more information....
[http://diamond.businessobjects.com/node/2109 | /node/2109]
However, if you are using the CR Web Forms Viewer in an ASP.NET app, then this functionality is not available.

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

Dynpro application: how to perform some code when user click window close

Hello,
I'm developing dynpro application. This application needs to perform some code when exiting.
I can do that with MODULE xxxxx AT EXIT-COMMAND. But this code can't be performed when user of application click on button closing window (classic R/3 window, not pop-up).
Does anybody know how to bind some code to clicking on button closing window?
Best regards,
Josef Motl

As far as the prompt that you get when you close the last window is coming from the counter that SAP maintains regarding the number of open sessions(windows). When this counter reaches 1, I guess they have a check to issue a prompt. There was a discussion in this forum a long time back regarding how we can know that session id like SM04. There was no conclusion reached then. Theoritically, let us know you know this id for the session in which the user opened a particular page, then you can see if that session is deleted and then take the necessary action. There are some TH_* function modules that seem to be promising, but I was not able to conclusively achieve the control over a particular session.
See if you can look at SM04 and get an idea. Please do let us know if you find the solution.
Srinivas

How to close a session when user clicks Logout

In my jsp page i create a session for every user's name.
when particular user clicks logut without closing his personal page,
the others can access his page.
so, how to close a session when clicks logout link.?
similarly when user gets signin one system,he will not be sigin in other system.but how can we achieve this?
Thanks in Advance

What is the name of the session variable that you are creating on login? When he clicks logout, set that session variable to null. Like session.setAttribute("userName",null); and check for non-null condition before proceeding with any functionality in your jsp's.
What is the second question? You want to prevent duplicate logins from different systems? You would have to maintain a static datastructure like a HashMap for instance. Everytime a user logs in, put an entry into the HashMap...like userMap.put("userName","userName"); If an entry already exists, throw a message saying that user already logged in from another machine...

How to get login page when user clicks on browser's back button

Hi,
I am using struts framework.
I have set property nochache=true in response header of all pages.
So, browser does not caches my pages.
Now,when I am clicking on browser's back button, I am getting following message..generated by browser.
Warning: Page has Expired The page you requested was created using information you submitted in a form. This page is no longer available. As a security precaution, Internet Explorer does not automatically resubmit your information for you.
To resubmit your information and view this Web page, click the Refresh button.
Instead of that I want to show user a login page, when it clicks on back button.
Can anyone help me?

Hi,
I agree with your suggestion.But my query is,
If you have seen many credit card or banking websites,generally when user clicks on browser's back button,its redirectly user to login page of it for security reasons.
I want to implement that kind of functionality.So need help on that point

How to get a callback when a counter has reached a certain value

Hi, I'm trying to figure out how to hook up an event to be fired when a counter has reached a specific value.
We have a counter hooked up to an encoder a constantly counting encoder pulses. I want to set up a counter task to give a callback
as soon as a certain encoder value is reached. I.e give callback when countervalue is 1000. This value should be dynamically changable so next time the countervalue to generate a callback could be any value.
I understand there's workarounds like polling and/or read current values and subtract with offsets from a zerolevel... and so on, but to minimize complexity I'd like to just hook up a Task callback with a changable countervalue parameter.
I'm using DaqMx and have a 6220 but any card can be used.
/J

In that case you should do something like this;
Task.CIChannels.CreateCountEdgesChannel(
"/Dev1/Ctr0",
"SomeName",
CICountEdgesActiveEdge.Rising,
iTerminalCount - iTrigcount, //iTerminalCount is the maximum value of the counters register, these things are // probably board dependent but constant. iTrigcount is the variable you pass (e.g. 1000)
CICountEdgesCountDirection.Up);
Then you can hook up an eventhandler like so;
Task.CounterOutput += new CounterOutputEventHandler(Task_CounterOutput);
And the eventhandler;
void Task_CounterOutput(object sender, CounterOutputEventArgs e)
// Do stuff. Probably the first thing to do here is stop the Task...
You can fill this in however you please...
I never used this but it should work I think. Also have a look here to see how you can calculate Terminal Count;
Info on TC
Now here's to hoping you like C# (because I absolutely hate VB
If necessary and you provide more feedback I can also build you a class that handles the job you need... Let me know!

Video Gallery, How to Stop overlapping streams when user navigates to next item? Bug or syntax?

My NASA Multimedia News App is exhibiting behavior that I would very much like to change. The app is in the store at
http://apps.microsoft.com/windows/en-us/app/nasa-multimedia-news/7e74f3fb-b550-4ac6-b437-388f034ee6df
If you look at one of the three video galleries, here is the scenario:
1. Start one of the videos, for example the most recent one.
2. without MANUALLY pausing the first video and before it finishes, scroll to the next item in the same gallery and PLAY it.
3. two streams are now playing, audio overlapping.
4. move on to the next item in the gallery OR GO TO A DIFFERENT PAGE/SCREEN, cover your ears....
in fact the stream needs to stop if you navigate away from it by either starting a different video in the same gallery or when you navigate to a different screen/page in the app. and it doesn't.
5. in fact, if you close the app by dragging it down and don't final close it by drag/hold flip or using taskmgr, if you re-open it the multiple audio streams will still be playing from where they left off.
I don't honestly know if it is the video control or something I didn't do in the syntax (or even if something CAN be done), but with the overlapping cacophony that results, it is less than optimal. My expectations/hopes, were that if one stream was already
playing, that moving to a new item and starting THAT stream would automatically terminate the original one that was playing so that only a single audio stream can be heard.
I hope the issue is clear.
Is this a bug? If it is by design, ugh. And is there a work around?
-- Barb Bowman

On Sat, 5 Apr 2014 01:20:04 +0000, thorwm wrote:
>All kidding aside, I did some searching in the forum and I found this post that may help?
>
>http://social.technet.microsoft.com/Forums/en-US/6037342d-2575-411b-a496-90d306f82b00/unable-to-stop-a-video-playing-using-updatecontextvideopause-true?forum=projectsiena
>
>Btw, what you're talking about sounds very similar to how Adobe Flash works - it figures that you (the end user) must know what you're doing when you start another audio file / video so it keeps adding to the stream. The way I helped
the end user was to add the code to stop the media file playing when another one was selected.
>
>Hopefully the thread above gives you some ideas how you might do this in your situation.
>
>
>I look forward to hearing what you find - sounds like a neat app (no pun intended!)
Thor, it is my NASA Multimedia App - I resubmitted it last night and I guess a
different tester got it and the update went through. But the issue still exists.
The difference between what I have in my app and that other thread is that I
have a video GALLERY as opposed to individual players. I did try messing around
with that syntax
UpdateContext({videoPause: false}); UpdateContext({videoPause: true});
Navigate(scrHome, ScreenTransition!Fade)
But it didn't work between screens in my App and anyway, half of the issue is
that it wouldn't work on a single screen that contains a video gallery that has
say 10 videos, there is no OnSelect function used. I tried experimenting to see
if I could get syntax working at least for when the navigation is to a different
screen, but it doesn't work for me. Probably because it is a gallery.
Hoping that Robin has a solution...
-- Barb Bowman

How to get an alert when user login with "DDIC" in any of the systems?

Hi all,
Can it be possible when ever the user login with DDIC user in any of the satellite system,can we we get an alert -as DDIC login attempt in any system?
Is this possiblem in CCMS or BPM or...?
Regards,
Neni

Hi Srikrishna,
Link which you have give is good.But when i login with DDIC i am not geting alerts and i am not able to add any satllites system to
under Security node
My configuration:
Miximum values for list                               1 min
When should an alert be triggered?
From value                   Red               Severity      2
Max. number of alerts for each message ID             50
Max. number of lines to be saved                      50
SM19
Client     *                                                     Events
User       DDIC selected -Dailog logon         Alll
                                       systmem
Please help me.
Regards,
Swaroop

How does installing programs work when user folder moved to separate drive?

Hi everyone
I have my user folder on a separate drive from my boot drive.
I have set up a new installation of OS X on a third drive and pointed the main account's user folder on that third drive to the user folder drive.
This means that the dock that shows up when I boot off that third drive contains aliases linking to programs on the ordinary boot drive.
If I install programs on the third drive and make aliases in the dock, will that cause a conflict when I boot off the ordinary boot drive?
And if I remove from the dock aliases linking to the ordinary boot drive, will they then disappear when booted off the ordinary boot drive?
Thanks for any insight.
/p

I tried that.
1) I created a standard user account called "Test."
2) While logged in as Test I edited the sidebar. Then I logged out and back in again to confirm that the settings were retained. They were.
3) While logged in as Test I copied the user folder from SystemDisk/Users/Test to DataDisk/Users/Test.
4) I logged out of Test and logged in as Admin.
5) I changed the home directory for the Test account to /Volumes/DataDisk/Users/Test.
6) I deleted the directory at SystemDisk/Users/Test.
7) I logged out of Admin and logged in as Test.
8) I edited the sidebar. Then I logged out and back in again to see if the settings were retained. They were not.
9) I repeated steps 3-7, this time moving the home directory back to its original location at SystemDisk/Users/Test.
10) Again I edited the sidebar, logged out and logged back in again. This time the settings were retained, just as they had been before I moved the directory in the first place.
Since the functionality returns when I move the home directory back to the system disk, I've concluded that it is not due to any corruption of library files or such. It seems to be a problem with the location of home directory.
V.K., in your configuration, is the account with the moved home directory an Admin account or a Standard account? I have not tested this with an admin account and I suppose that might make a difference.

BDC - How to ignore skipped screens when user click on back button

Hello all,
I am working on a module pool program. From this custom transaction I am calling a standard SAP screen using BAC call transaction. I am calling this screen by skipping 2-3 screens and user can directly see the 3 screen on an event on my custom transaction.
Now my issue is whenever the user want to back, he clicks on back button then user have to back from all the screens that I skipped.
Is this any way by which if user click on back then he can directly go to my custom transaction.
Please suggest.
FYI..
I am calling IA06 - Inspection characterstics screen from my custom screen using BDC.
Thanks,
Sanket Sethi

Hi Jovito,
I also think the same that it's not possible. Now my issue is how to get my requirement.
FYI..
To open Classification screen directly we have a function module CLFM_OBJECT_CLASSIFICATION. But if I want to open IA06
Inspection characterstics screen we don't have any FM or API to do the same.
So how will I get my requirement done. That why I use the BDC call transaction to open IA06 Insp. characterstics screen but here I am facing this Back issue.
Please advice if there is any suggestion.

How to find out date when user clicks on a date of Date Navigator

Hi Experts,
I have created WD application. It contains DateNavigator. User clicks on a particular date. We want to display the clicked date. How we can do so? I have done following coding. What I should type after "hi" + ????? to display the selected date.
public void onActionSelectDate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSelectDate(ServerEvent)
    wdComponentAPI.getMessageManager().reportSuccess("hi ");
    //@@end
Regards,
Gary

HI Gary,
You can do this by binding the context attribute of type date to the firstSelectedDate property of the datenavigator Ui element.
then suppose context attribute to which you have bound the UI element has the name date then create an action for the event onDaySelect. then write the following code in the event handler
public void onActionselectdate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionselectdate(ServerEvent)
    String str = wdContext.currentContextElement().getDate().toString();
    wdComponentAPI.getMessageManager().reportSuccess("HI" + str);
    //@@end
It will solve your issue.
But the date format here will be YYYY-MM-DD if you want to change it then either you have to use one simple type or modify it in the code itself by using some string operation.
Regards,
Sarbjeet

How to kick guest user when user quota has exhausted

Similar Messages

Maybe you are looking for