How to kill process/Actavity in SAP ?
How to kill process/Actavity in SAP ?
The core file contains the memory state of the work process at the point it was terminated. You could use it for debugging the work process if you had access to the kernel source code, which you don't unless you are SAP. For most people, then, the core file is of no interest and just takes up space in the operating system's file system. Using "cancel without core" is the thing to do.
That said, sometimes I find "cancel without core" doesn't actually work but "cancel with core" does. I always try without core first, but occasionally have to resort to with core. If you do cancel with core, make sure to go and delete the core file afterwards to avoid the file system filling up. Work process core files can be large. You'll find it in a directory/folder here - /usr/sap/SID/DVEBMGS00/work (substitute DVEBMGS00 as appropriate).
Steve.
Similar Messages
-
How to change process chain in SAP APO, in RSCP tcode.
HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran. -
How the excise process happen in SAP.
Hi All !
Please tell me ,how to find out diffrence amount for given problem:-
Opening Balances of Excise duty payable accounts as on 31.3.2009 are coming in to picture in T- Code FAGLB03 is showing a credit balance Which actually should show zero balances. In same way cenvat Credit balances both in RG23 A part II and RG 23 C part II are also not matching.
for FAGLB03 ,some entry is passed with sa document type with FB50.
And explain me how the excise process happen in SAP.
Thanks and Regards
Archana SharmaHi!
Please give the details of process and tell me how I will update in given table J_2IACCBAL.
Thanks & Regards
Archana Sharma -
How the excise process happen in SAP. FAGLB03 is showing a credit ba.
Hi All !
Please tell me ,how to find out diffrence amount for given problem:-
Opening Balances of Excise duty payable accounts as on 31.3.2009 are coming in to picture in T- Code FAGLB03 is showing a credit balance Which actually should show zero balances. In same way cenvat Credit balances both in RG23 A part II and RG 23 C part II are also not matching.
for FAGLB03 ,some entry is passed with sa document type with FB50.
And explain me how the excise process happen in SAP.
Thanks and Regards
Archana SharmaHi,
Reverse FB50 Document & post through J1IH.
Ramesh -
How to kill process in windows
Hi,
how to kill the process in windows.
Thanks in advance>
I already tried that one rmishra......
but it was not killed.>
I think you are trying to find something like "ps - ef" in Unix for windows? if yes then you can follow below:
show processes
C:\>tasklist
Image Name PID Session Name Session# Mem Usage
========================= ====== ================ ======== ============
System Idle Process 0 Console 0 28 K
System 4 Console 0 260 K
smss.exe 892 Console 0 460 K
csrss.exe 952 Console 0 396,948 K
winlogon.exe 976 Console 0 5,944 K
services.exe 1020 Console 0 69,300 K
lsass.exe 1032 Console 0 4,260 K
svchost.exe 1204 Console 0 14,384 K
svchost.exe 1312 Console 0 14,056 K
svchost.exe 1436 Console 0 59,188 K
snac.exe 1488 Console 0 1,600 K
svchost.exe 1656 Console 0 6,668 K
svchost.exe 1744 Console 0 10,656 K
spoolsv.exe 1864 Console 0 12,560 K
svchost.exe 332 Console 0 8,884 K
jqs.exe 576 Console 0 1,424 K
notepad.exe 4772 Console 0 5,640 K
.........................................ect
C:\>taskkill /pid 4772
SUCCESS: The process with PID 4772 has been terminated.-RMishra -
How to kill process by passing processid to method
what changes should be made in following method
import com.sap.caf.eu.gp.context.api.GPContextFactory;
import com.sap.caf.eu.gp.process.api.GPProcessFactory;
import com.sap.caf.eu.gp.process.api.IGPProcessInstance;
import com.sap.caf.eu.gp.process.api.IGPProcessInstanceInfo;
import com.sap.caf.eu.gp.process.rt.api.IGPRuntimeManager;
import com.sap.security.api.IUser;
public void stopProcess( java.sql.Date startDate, java.sql.Date endDate )
//@@begin stopProcess()
IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
try{
IWDClientUser wdUser = WDClientUser.getCurrentUser();
user = wdUser.getSAPUser();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user);
IGPProcessInstanceInfo[] array = rtm.getRunningInstances(GPSearchRole.SEARCH_ROLE_OWNER, startDate, endDate, userContext);
for (int i=0; i<array.length; i++){
String instanceId = array<i>.getProcessInstanceID();
IGPProcessInstance instance = rtm.getProcessInstance(instanceId, userContext);
rtm.stopProcess(instance, userContext);Hi,
if the process has been created inside your java program, e.g.
Process proc = Runtime.exec("notepad.exe");then you can kill it using
proc.destroy();Andre -
How to kill TP process at OS Level
Dear ALL,
How to kill the TP process at OS level
Operating System : win 2003Q.1 Different Method for Kernel Upgradation
So far till now, I have known only one method for Kernel upgradation which is very very simple. I dont think we need any other work-around for Kernel upgrade as this method is very very straight forward. The steps to be followed are ---
Go to the SAP OSS Site :-
http://service.sap.com/SWCenter-Main
From here Download the kernel programs in a temporary folder or use Download Basket toi download the Kernel.
Now shutdown the R/3 database and all services including saposcol.
Create a folder and copy the original executables from /exe/run/ directory then uncar the downloaded files and replace the original executables in /exe/run/ directory.
Then restart your system.
A couple of important points to remember are :-.
a) Always make a copy of the files you're going to replace. For e.g. Create a directory (oldkern) and copy all the old files before replacing them (this helps when sometimes the new Kernel has problems, and you can revert it)
b) You have to shutdown SAP and the Database using the OLD kernel file. Again it is good practice to shutdown everything first.
Regards,
Mandar -
Help: how to kill a bpm process
I create a bpm process with an infinite loop and my server crash everytime.
How to kill this process.Hi Capro
Log into NWA
Navigate to manage processes
NWA-> Operation management -> Processes and Tasks -> Manage Processes
Select the nasty process instance and click on Actions> Cancel
By doing so you will be canceling the process instance and this will help in saving your server from crashing
If you are using 7.20 there are options to handle this too from BPM System Overview
Regards,
Harsha -
Hi Guys,
I want to know how to kill a BPM process.
any help would be appreciated
Thanks,
SriniSrini,
Refer this -Re: How to stop infinite loop?
raj. -
HOW TO STOP A SCHEDULING A PROCESS CHAIN IN SAP BPC
Hello Expert,
Can Any 1 tell me how to stop a scheduling of a process chain in sap bpc ??Hi Neeraj,
Your question is not clear.
If you are asking - How to delete a schedule which runs a process chain/DM package from EPM, then please go to Data Manager -> click View Status arrow -> select view schedule status -> select the schedule, right click and choose delete schedule.
Neha -
How to find business process diagrams of SAP reference model
hello guys,
I am reading book 'SAP R/3 Business Blueprint: Understanding Enterprise Supply Chain Management' recently. In this book, the author shows many EPC process diagrams of SAP reference model,but how could I find the process diagrams in SAP system.
I google this 'SAP Reference model', and find transaction: SB09 Business Navigator-Process view. But I can not find this transaction in IDES4.7or ECC6 IDES.
Thanks.
Edited by: Justin on Jul 2, 2009 10:20 AMHi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar -
How is u201CCheques in Transitu201D process mapped IN sap B1
Hi,
How is u201CCheques in Transitu201D process mapped in SAP Business One > Banking Transaction.
Regards
shashiI am afraid there is no function in current B1 to map u201CCheques in Transitu201D process.
Thanks,
Gordon -
How to kill back ground processes?
I had installed Amonitor app and it shows there are these 3 processes, poc-bbot, bash, cp running. It was never there. can anyone tell me how to kill it?
Hi, thanks.
Actually these 3 processes has never shows up. And yes, i was kill all the apps once i dont use them. my recently open bar is always empty.
The reason why i has concern is my bat life is shorter when these 3 processes are running. It used to has this, so i restore to factory mode. then after awhile, these came back. -
How to kill a process chain in an intermediate step...?
How to kill a process chain in an intermediate step...?
I have tried doing it using SM37... but still the chain is hanging....
Please help ASAP...
Regards
SnehaHi Sneha,
If its a loading process then:
1. Go to monitor & make its overall status RED.
2. Go to the target & make the QM status RED.
3. Since its loading data to BW, its R/3 will be active even if you make any status RED in BW.
4. Cancel its corresponding R/3 job. U'll get its R/3 job from monitor>Header tab>Job name. Copy that job name& go to R/3 side>sm37>in Job name add B*followed by the job name copied & then delete the Active job.
Once this is done then your loading process will anyhow stop further stopping the Process chian.
If your job is other than loading, then simply go to that process chain & remove the link between the active process nad the next process after cancelling the active job (as mentioned in the various replies for your question).
Give some time to update the staus of that cancelled job in Db, because even if you cancel any active job, it requires some time to refresh it updated status. Once it is cancelled you can rejoin the link between the proceses and reactivate & schedule your process chain.
hope it'll help -
hi,
I have question how to kill the process chain during running.
thank you.Hi
If the process chain is running in background,
goto <b>SM37</b>
Give * in the jobname
Give the username who scheduled the process chain
Job status - check the check boxes - SCHED, relased, ready, active
click <b>execute</b>.
It displays all the process chains that, scheduled & running.
You can select the process chain that need to be stopped & click STOP active job or ctrl+F1.
Hope this helps!
Kindly award points for all useful answers.
If you post the BW related queries in the <b>BI general</b> forum, you will get more answers.
Best regards,
Thangesh
Maybe you are looking for
-
How do I transfer my boot disc data to a new disc and have the new disc become the boot disc?
My original 500 Gb boot drive is full (~800 Mb available). I purchased a 1 Tb drive and installed it (no problems). Now I want to transfer everything on my original boot disc to the new drive and have the new drive become the boot disc. I would th
-
Songs and Playlists cannot be dragged from the itunes app onto desktop or usb drives. Files can be dragged from Finder but only one at a time. The issue started when I updated Yosemite out of BETA. I am running: OS X Yosemite 10.10 2013 Macbook Pro i
-
Class files created with JBuilder don't run from command line ?
I have created an Application with JBuilder which is running perfectly from within JBuilder. However when I tried to run the app from the command line using c:\java ...... I got an error Exception in thread "main" java.lang.NoClassDefFoundError: Itas
-
Query with Outer Join - Infocube X Infoobject
Hi, I Have an infoobject(0account) and an infocube(Ic_accounts) in a Multicube. I Have a Query and i need to show in this Query the accounts from infoobject(0account) that are not in infocube(ic_accounts). How can I do this ? Thanks
-
Regarding update of a nokia 6300
I just started the update over the air , but can anyone tell me what is the size of the firmware? v 5.50 ? and after it downloads the update can i install it later on when the phone will be charged at full capacity in order to work properly ? Thanks,