How to know the Buyer Requisition Assign Date

Dear All,
I am still new in this Purchasing Module and need help to know How I can find the Buyer's Requisition [Assign Date] and [Who Assign] it?
Take in mind the Buyer complains about the delay time to see the Requisition in the Auto Create Pool although it is Approved earlier before more than two months.
Please anybody can help me I will be Appreciated.

A requisition shows up in buyer's workbench as soon as it is approved provided the buyer name on the req is filled in.
There is no time delay.
Hope this answers your question
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

Similar Messages

  • How to know the User name and date, who executed the report last time.

    Hi All,
    We are collecting a list of reports which are not executed for past 3 months. Can anybody tell me how to know the username and date they executed the report last time.
    Is there any table to look ? or is there any process ?
    Thanks,
    Ravi.

    Ravi,
    Use SE16 - then look at rszcompdir.
    We look up Version = 13 for queries.
    Regards
    Gill

  • HOW TO Know the cube for particular data source

    HI ,
    How to know the standard  data targets for standard  data sources in sap .
    can u give me the some links o it .
    regards ,
    srinvias

    Hi Srinivas,
    Go through this below BI Content Help. Here you will be able to find the data sources for specific application areas with the standard data models, you will find standard cubes as well.
    [http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm]
    Regards,
    Pratap Sone

  • How to know the STD business content data source ?

    Hi,
    Where we can find the list of standard data sources both master and transactional
    which are delivered by SAP?
    i searched in help portal, but i am not seeing the data sources which are specific to the application!
    can nay body help me out?
    Thanks,
    Ravi

    In help portal you can find several datasources, mainly transactional in (this is for netwaver 04s version 3.53.)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    If you want to a full list of datasources, go to your R/3 system RSA6 transaction.

  • How to know the tables for a datasource like 2lis_17_order

    Hi,
    How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
    pls respond. thanks in advance

    Hi,
    Go to RSO2 at source system, Enter data source and click on display.
    if its table based then you can see table name there it self.
    if its view based then notedown the view name and go to  SE11, provide view and click on display. see joined table names there.
    Thanks

  • How to know the balance and validity of internet data in iPad

    How to know the balance and validity of internet data in iPad?

    Sir I m using internet in ipad4 with airtel network
    They provide me 2gb data with the amount of 255 rupees
    And now I inserted the sim in my ipad4
    And start the surfing on safari n all
    And now I wanted to know how much data is balance.

  • How to know the data transfer is complited? there is any message will get l

    how to know the data transfer is complited? there is any message will get like 'data uploaded is successfully complited' ?

    Hi,
    You can check SY-SUBRC = 0 or if there is an exception raised then an error occured.
    Regards,
    Ferry Lianto

  • How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc.

    How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc. I bought a new iphone 5 on ebay.com - he was used. For a decision on my case ebay asks for this information ...

    Apple will never reveal that info to you, since you were not the originally purchaser. However, you can get the date of sale by entering the SN here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Warranty starts on the date of sale, which is most likely the date of activation, but not necessarily so.

  • How to know the last reboot date of a server B-series ?

    Hi,
    The question is in the title !
    So, is it possible to know the last reload/reset date or the update time of a server blade B-series ?
    I could not find this piece of information in the GUI (or via a show command)
    Many thanks
    Nicolas.          

    There are also some events in the SEL log that are generated when the operating system loads that you could pull from the CLI:
    scope server 1/1
    show sel | grep "OEM System Boot Event" | last lines 1
    Other things to grep for would be:
    Entity presence MAIN_POWER_PRS #0x5a | Device Present | Asserted
    Entity presence BIOS_POST_CMPLT #0x5d | Device Present | Asserted

  • How to find the table in which data from a structure sits

    Hi,
    I want to know how to find the exact table where data sitting in various structures during runtime are stored.
    For instance,in ME23N we have various tabs and data in those are held in various structures. This we can see by checking the technical setting of each field.
    I want to know in which table the data is actually stored for each field and how to find them.
    Any other means other than using "WHERE USED" option?
    Thanks
    CM

    After checking for technical field from the screen, when you reach out to structure, you can dbl click on the particular field's data element. From this data-element you can get to know in which tables it is used. Also if the data element refers to some master data field then you can check out its domain and in the domain you can refer the<b> value table</b> for that domain. This is what i will do if i am not sure about anything.
    Hope it will help a little.
    Jignesh.

  • How to know the dynamic values for this :AND category_id_query IN (1, :3, )

    Hi Team,
    R12 Instance :
    Oracle Installed Base Agent User Responsibility --> Item Instances -->
    Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
    In the above page there are two table regions.
    Notes.
    -------------------------------------Table Region---------------------------
    Attachments
    -------------------------------------Table Region---------------------------
    --the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
    I want to know what are the document types are displayed in this page ?
    --We developed a custom program to attach the attachments to the  services contracts and the above seeded OAF page displays those ..as needed.
    But after recent changes..the Attachments--> table region is not showing the attachments.
    I have verified the query..and could not find any clue in that..
    but i need some help if you guys can provide..
    SELECT *
    FROM
    *(SELECT d.DOCUMENT_ID,*
    d.DATATYPE_ID,
    d.DATATYPE_NAME,
    d.DESCRIPTION,
    DECODE(d.FILE_NAME, NULL,
    *(SELECT message_text*
    FROM fnd_new_messages
    WHERE message_name = 'FND_UNDEFINED'
    AND application_id = 0
    AND language_code  = userenv('LANG')
    *), d.FILE_NAME)FileName,*
    d.MEDIA_ID,
    d.CATEGORY_ID,
    d.DM_NODE,
    d.DM_FOLDER_PATH,
    d.DM_TYPE,
    d.DM_DOCUMENT_ID,
    d.DM_VERSION_NUMBER,
    ad.ATTACHED_DOCUMENT_ID,
    ad.ENTITY_NAME,
    ad.PK1_VALUE,
    ad.PK2_VALUE,
    ad.PK3_VALUE,
    ad.PK4_VALUE,
    ad.PK5_VALUE,
    d.usage_type,
    d.security_type,
    d.security_id,
    ad.category_id attachment_catgeory_id,
    ad.status,
    d.storage_type,
    d.image_type,
    d.START_DATE_ACTIVE,
    d.END_DATE_ACTIVE,
    d.REQUEST_ID,
    d.PROGRAM_APPLICATION_ID,
    d.PROGRAM_ID,
    d.category_description,
    d.publish_flag,
    DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
    d.URL,
    d.TITLE
    FROM FND_DOCUMENTS_VL d,
    FND_ATTACHED_DOCUMENTS ad
    WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
    *) QRSLT*
    WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
    AND pk1_value          IN ( 600144,599046) --:2
    AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    AND datatype_id       IN (6,2,1,5)
    AND (SECURITY_TYPE     =4
    OR PUBLISH_FLAG        ='Y')))
    --='000180931' -- 'ADP118'
    The above seeded query is the one which is used for table region to retrieve the data..
    how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    --Sridhar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Patricia,
    is it working for restricted key figure and calculated key figure ??
    Note Number Fisc Period Opening Days
    1 1 2
    2 1 3
    3 1 0
    because I have other restriction, so I create two restricted key figure..
    RK1  with restriction :  Total Number of Note,
    RK2  with restriction :  Total Opening Days ,
    then I Created a calculated key figure, average opening days in a period
    CK1 = RK2 / RK1..
    in this case, I am not sure if it will work or not..
    for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
    during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
    could you please confirm..

  • With a contract number, how to know the total PO release value against it?

    Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract.  In other word, we would like to know the total release value of all the POs with the same contract number.  To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
    We will give you reward points!
    Thanks!

    hi Mohammad,
    By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess.  Could you let us know which one is the PO release value for this contract?
    Contract   Type Vendor     Name                                 PGp Agmt. date
      Item  Material           Short text                               Mat. group
      D I A Plnt SLoc                 Targ.qty. Un       Net price  Curr.   per Un
    4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
    Agreement start06/20/2006 Agreement end 12/31/2007
    Tgt. val.        1,000,000.00  USD   Open          1,000,000.00 USD   100.00 %
      00001                    Inspection Svcs, Construction            R3VNI
      L   U                                  0  UL            0.00  USD       1 EA
      00002                    Chief Inspector                          R3VNI
      L   U                                  0  DAY         390.00  USD       1 DAY

  • How to download the ALV Hierchial Tree Data to an Excel sheet.

    Hi All,
    Can any body please let me ,if there is any possibility to know How to download the ALV Hierchial Tree Data to an Excel sheet.
    If yes, please let me know how could this can b acheived.
    Regards,
    Rohini.

    Hi Rohini
    There is no such functionality provided by SAP to download ALV Tree Hierarichal Tree into excel sheet .
    If you had this kind of senario then i can propose one solution create two radio buttons one is to display in ALV Tree Format and the other is classical report which you can download it for futher process
    Regards
    Hitesh Batra

  • How to know the run time of a program..?

    Hi Gurus,
    How to know the exact run time of a program....?
    Suppose i've a program....I've changed the code to improve the performance.
    Now i want to compare run time of older and new one...How to do this...?
    Pls help me ....
    Thanks and Regards,
    Nagarjuna

    Hi,
    go thru the below mentioned code............
    data:   start TYPE i,
              end TYPE i,
              dif TYPE i.
    GET RUN TIME FIELD start.
    SELECT SINGLE bukrs belnr gjahr blart budat
    FROM bkpf
    INTO (cc, doc, fy, doc_ty, pst_dt)
    WHERE bukrs = p_bukrs
    AND belnr = p_belnr
    AND gjahr = p_gjahr.
    GET RUN TIME FIELD end.
    dif = end - start.
    WRITE: /001 'Time for select',
    067 ':', dif, 'microseconds'.
    Reward all helpful answers.
    Thanks

  • How to get the name of a Data Element of a generic Table!

    Hi guys!
    In my function i have the following import paramenter
    i_outtab type standard table
    now i import a table and i want to get the dataelement of the fields.
    is there a way to do this??

    Hello Thomas
    Perhaps the following sample report may be useful for you.
    *& Report  ZUS_SDN_RTTI_STRUCT_COMPONENTS
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145711"></a>
    *& Thread: How to get the name of a Data Element of a generic Table!
    REPORT  zus_sdn_rtti_struct_components.
    TYPE-POOLS: abap.
    TYPES: BEGIN OF ty_s_outtab.
    TYPES: bukrs    TYPE bukrs.
    TYPES: kunnr    TYPE kunnr.
    TYPES: END OF ty_s_outtab.
    DATA: gdo_data    TYPE REF TO data.
    DATA: gs_outtab   TYPE ty_s_outtab.
    DATA: go_typedescr  TYPE REF TO cl_abap_typedescr,
          go_structdescr  TYPE REF TO cl_abap_structdescr,
          go_datadescr    type ref to cl_abap_datadescr.
    DATA: gs_comp        TYPE abap_compdescr,
          gd_dtel        type string,
          gt_dfies        type ddfields.
    FIELD-SYMBOLS:
      <gs_struct> TYPE ANY.
    START-OF-SELECTION.
      BREAK-POINT.
      GET REFERENCE OF gs_outtab INTO gdo_data.
      ASSIGN gdo_data->* TO <gs_struct>.
      go_typedescr = cl_abap_typedescr=>describe_by_data( <gs_struct> ).
      go_structdescr ?= go_typedescr.
      BREAK-POINT.
      LOOP AT go_structdescr->components INTO gs_comp.
        go_datadescr = GO_STRUCTDESCR->GET_COMPONENT_TYPE( gs_comp-name ).
        gd_dtel = go_datadescr->get_relative_name( ).
        write: / syst-tabix, 'Data element =', gd_dtel.
      ENDLOOP.
    END-OF-SELECTION.
    Regards
      Uwe

Maybe you are looking for