How to find the table in which data from a structure sits

Hi,
I want to know how to find the exact table where data sitting in various structures during runtime are stored.
For instance,in ME23N we have various tabs and data in those are held in various structures. This we can see by checking the technical setting of each field.
I want to know in which table the data is actually stored for each field and how to find them.
Any other means other than using "WHERE USED" option?
Thanks
CM

After checking for technical field from the screen, when you reach out to structure, you can dbl click on the particular field's data element. From this data-element you can get to know in which tables it is used. Also if the data element refers to some master data field then you can check out its domain and in the domain you can refer the value table for that domain. This is what i will do if i am not sure about anything.
Hope it will help a little.
Jignesh.

Similar Messages

How to fill the table UD_SAPHR with data from SAP HR Connector

Hi, I`ve searched all the forrum but didn`t find how to map fields from connector form to the any field in OIM. I tryied with entity adapters but failed to reach any result. The problem is that I even cant put incoming data with connector to the table of the connector form (UD_SAPHR).
I will be grateful for any help. Below is the cut of the log. In few words - how to map, for example, field "Department=40000260" to the field in the USR table or UD_SAPHR table (or any other - to have this information in OIM).
OIM-9101Upd5, OS-Oracle Enterprise Linux4x64,SAP COnnector-SAP-ER90460, Database-Oracle 10gx64, Appication server-SOA(Oracle Application server)
INFO,01 Jul 2009 14:08:11,504,[XL_INTG.SAPHRMS],getDetailsForRecon(): *****************************
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getDetailsForRecon(): 00000017
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],reconcileEmp(): SAPUserRecon for SAP : SAP HRMS IT Resource:EmployeeId=00000017
DEBUG,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],SAPUserRecon:returnDate(): Employee Status***3
DEBUG,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],EmpStatus***3
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Recon key is 00000017
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Hash Key is USR_UDF_PERSONNEL_NUMBER
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Get UserId of user with reconKey: 00000017
INFO,01 Jul 2009 14:08:11,506,[XL_INTG.SAPHRMS],getUserId():hmFilter: {USR_UDF_PERSONNEL_NUMBER=00000017}
INFO,01 Jul 2009 14:08:11,540,[XL_INTG.SAPHRMS],Result set rs contains : Thor.API.tcMetaDataSet@790a37
INFO,01 Jul 2009 14:08:11,540,[XL_INTG.SAPHRMS],getUserId(): Xellerate RS Count*** 0
DEBUG,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): hmReturn ***{Create=0, UserLinked=0, userId=, UserKey=, XelUser=, Exist=0, User=}
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Recon key is 00000017
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Hash Key is USR_UDF_PERSONNEL_NUMBER
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Get UserId of user with reconKey: 00000017
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId():hmFilter: {USR_UDF_PERSONNEL_NUMBER=00000017}
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],Result set rs contains : Thor.API.tcMetaDataSet@282f10
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],getUserId(): Xellerate RS Count*** 0
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],getUserId(): hmReturn ***{Create=0, UserLinked=0, userId=, UserKey=, XelUser=, Exist=0, User=}
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],sEmployeeUserID***
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],UserKey***
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],EmpStatus fetch from target System is 3
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],EmpStatus Mentioned in Task scheduler is 3
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],reconcileEmp():sUser get from Resource Object Table ***
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],reconcileEmp():sXelUser get from Xellerate Table***
el Number=00000017, LinkedUserID=, Xellerate Type=End-User Administrator, First Name=п⌠п╣пҐпҐп╟пЄп╦п╧, Last Name=п■п╟п╡я▀пЄп╬п╡, Role=Consultant, Middle Name=FromHRMS=1}╣п╡п╦я┤, Userr
INFO,01 Jul 2009 14:08:11,571,[XL_INTG.SAPHRMS],Reconciliation of the user entered
DEBUG,01 Jul 2009 14:08:11,571,[XL_INTG.SAPHRMS],before create HR user reconciliation event***{PostalCode=, EndDate=9999/12/31 12:00:00 MSK, EmailAddress=, SSN=, State=, District=, TelephoneNumber=, Manager=, StartDate=1888/12/01 12:00:00 MSK, City=, EmplUserId=, UserLinked=0, UserLocked=0, FirstName=п⌠п╣пҐпҐп╟пЄп╦onnel Number=00000017, EmployeeId=00000017, Country=RU, Title=Mr, Department=40000260, MiddleName=п░пҐпЄя─п╣п╣п╡п╦я┤, LastName=п■п╟п╡я▀пЄп╬п╡}
INFO,01 Jul 2009 14:08:11,711,[XL_INTG.SAPHRMS],disableEnableXelUser(): Get UserKey of user with reconKey: 00000017 for SAP SAP HRMS IT Resource
DEBUG,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],disableEnableXelUser(): Xellerate RS Count*** 0
INFO,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],reconcileEmp(): User Reconciliation for Create & Modify User is completed.
INFO,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],reconcileEmp() **** DONE RECONCILIATION

That is my problem. I get only those fields, that are in the xellerate user standard form. And I need also fields "Department" and "City".
This information connector gets from SAP (as it is seen in log) but doesn`t save it anywhere inside the OIM, though such fields exists in the UD_SAPHR table (and correspondend form) but this table remains empty after reconciliation.
DEBUG,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],before create XL user reconciliation event***{Email=, Organization=Xellerate Users, User ID=00000072, Personnel Number=00000072, LinkedUserID=, Xellerate Type=End-User Administrator, First Name=п°пҐп╣, Last Name=п п╬п╪п©п╣пҐя│п╦я─я┐п╧п╨п╟, Role=Consultant, Middle NamomHRMS=1}
INFO,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],Reconciliation of the user entered
DEBUG,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],before create HR user reconciliation event***{PostalCode=, EndDate=9999/12/31 12:00:00 MSK, EmailAddress=, SSN=, State=, District=, TelephoneNumber=, Manager=, StartDate=1970/01/01 12:00:00 MSK, City=, EmplUserId=, UserLinked=0, UserLocked=0, FirstName=п°пҐп╣, Person Number=00000072, EmployeeId=00000072, Country=RU, Title=Mr, Department=40000240, MiddleName=п·я┌п©я┐я│п╨, LastName=п п╬п╪п©п╣пҐя│п╦я─я┐п╧п╨п╟}
Edited by: user6645106 on 03.07.2009 10:12

How to find the tables which are the candidates for gathering stats in 10g

Hi,
In 10g how can we find the tables, partitions which are the candidates for gathering the stats.
I want to findo those tables, partitions and gather the stats on daily basis.
Thanks,
Mahi

The probem you describe has been posted about before. There are known issues with the default dbms_stats parameter settings for some environements.
What you can do is just go ahead an manually submit dbms_stats commands with appropriate parameters for tables that have not been analyzed or modify the maintenance window to give it more time.
I would rather just generate the missing statistics myself then the job can continue to run in the normal maintenance window. Since the job should be looking only for tables that meet the stale requirements then once everything is analyzed it is likely the job can keep the statistics updated in the default time allowed.
Be warned that the default parameter settings do not work well for some tables in some environments and if that proves true for your shop you can generate workable statistics on a table and then lock them so the nightly job ships regenerating the statistics for that table. You would then manually unlock, generate, and lock that statistics for that table as necessary.
HTH -- Mark D Powell --

How to find the tables of datasource

Hi
can anyone tell me how to find the tables from where the datasource is extracting data?
I have a datasource 0CO_PC_ACT_02 which i thought was extracting data from MBEW, but my MBEW table has only around 1000 records but while scheduling the data load of infopackage my PSA shows more than 4000 records.
How does this happen?
Thanx in advance
Sujai

Hi,
yes it is mainly MBEW as well as MBEWH (history of MBEW); in adition you have some article ledger data (table ckmlhd) from which some records could be added; MARV as well...
You can check in function module KKBW_XBEW_BW_GET_DATA_IS1 all the details.
hope this helps...
Olivier.

How to find the tables

Could any one tell me how to find the tables for this Datasource 0GLACCEXT_T011_HIER and theExtract structure is ROHIEROS.But I did'nt see any fields on it.
In the Extract structure there is only one fields is OLTPSOURCE.
Could any one explain me how this hierarchy data get populated into BW. Its very urgent
Thanks in advance
Taj

http://help.sap.com/saphelp_bw33/helpdata/en/64/032de5ff014c4c86bc15272216a5e2/frameset.htm
table RFDT.. check the link
and also http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/6837bb0e954b7ab47aca5d9fce1101/frameset.htm
null

How to find the tables in OM

Hi All,
How to find the tables in Oracle order mangement and what are the links of the tables in oracle OM
Thanks & Regards
srikkanth.M

How to find the tables in Oracle order mangement and what are the links of the tables in oracle OMeTRM
http://etrm.oracle.com
Thanks,
Hussein

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

Urgent-How to find the tables which are used in DB02 transaction

Hi,
Can anybody help me in finding the tables in Tablespaces tabstrip & Tables n Indexes tabstrip in DB02 transaction??

Hi,
open the following link.
http://books.google.co.in/books?id=jTTrZjucb_QC&pg=PA37&lpg=PA37&dq=dbo2%2Bsap&source=web&ots=FgA9pC3u24&sig=sOG3EJRm5HGW2aFpkVVH_oxBjjo&hl=en#PPP1,M1
Master data load failure
Reward if Helpful
Jagadish

How to find the tables corresponding to a particular field in datasource.

Hi Experts,
There are lot of extra fields in the structure like MCEKKN as compared with the table EKKN. The data in these fields are coming from some other table.
So can u tell me how to find these tables corresponding to these fields?
Let me be more clear..
I want to know that the data in the datasource like 2LIS_02_ACC are coming from lot of tables.
How can I find those tables corresponding to each field in the extraction structure.
I have tried with ST05...as well as by filling setup tables in debbugging mode..but I am still in lot of confusion.
Please try to help me....U will get good points in response.
Thanx.
Vinod.

Hi Vinod,
Why are you trying to enhance the extractor because the steps you are following is tio enhance the structure
like transferd one of the field from pool to selection criteria
If you want to see only the fields of the extractor and from which table it is coming you just have to see the pool only.
There in the lef you have the fields which are already present in the extractor and in the right you have the avaialbale fields present.
Also in the two selection pools if you will see carefully you will find in each selection pool
"Table name" and then the "field name" and then description of the field data type and length.
Like in case of 2lIS_13_VDITM you will find all the fields coming from VBRK and VBRP and VBUK.
Just check it you will get an idea.
In this way you can find that which field in the extractor is coming from which of fields of the table.
I think this is what you want to know.
If not clear then do reply
Thanks

Please let me know how to write the Query to fetch data from tables

Hi Folks,
Please let me know how to get the data from different tables using the functionality SQ03,SQ02 and SQ01 .
Helpful answers will points awarded.
Regards,
Ram.

Dear Ram,
Please find the below link which gives in detail with screen shots.
[SAP Query|http://media.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf#search=%22CREATE%20REPORT%20USING%20SQVI%20%2C%20SAP%22]
Thanks
Murtuza

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

There is anyway to find the tables name where data is getting inserted currently.

Hi All,
I need T-Sql Query to find list of tables in which data is getting loaded currently.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi,
What About This Query:
SELECT B.TEXT,A.SESSION_ID,A.STATUS,A.COMMAND,A.CPU_TIME,A.TOTAL_ELAPSED_TIME,A.*,B.*
FROM SYS.DM_EXEC_REQUESTS A
CROSS APPLY SYS.DM_EXEC_SQL_TEXT (SQL_HANDLE) B
WHERE TEXT NOT LIKE '%SELECT B.TEXT,A.SESSION_ID,A.STATUS,A.COMMAND,A.CPU_TIME,A.TOTAL_ELAPSED_TIME,A.*,B.*%'
--AND TEXT LIKE '%'
ORDER BY START_TIME DESC
Thanks Shiven:) If Answer is Helpful, Please Vote
The query would return the currently executing query irrespective of insert. But, you are looking for the logging of table. Is my understanding wrong?
If you are looking for what is running on the server, then you can use the above script. The below is the one am using to get those info:
SELECT r.session_id ,
(Select Top 1 CON.client_net_address From sys.dm_exec_connections AS CON
where CON.session_id = r.session_id) Client_Address,
OBJECT_NAME(qt.objectid, qt.dbid),
r.[status] ,
r.wait_type ,
r.scheduler_id ,
SUBSTRING(qt.[text], r.statement_start_offset / 2,
( CASE WHEN r.statement_end_offset = -1
THEN LEN(CONVERT(NVARCHAR(MAX), qt.[text])) * 2
ELSE r.statement_end_offset
END - r.statement_start_offset ) / 2) AS [statement_executing] ,
DB_NAME(qt.[dbid]) AS [DatabaseName] ,
Object_NAME(qt.objectid) AS [ObjectName] ,
r.cpu_time ,
r.total_elapsed_time ,
r.reads ,
r.writes ,
r.logical_reads ,
r.plan_handle
FROM sys.dm_exec_requests AS r
CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS qt
WHERE r.session_id > 50 and r.session_id <> @@SPID

How to find the Last report run date

Hello All,
I have one ALV report.
In that report i have to display the date on which the report was run last time.
The user can run report both in backgroud as well as in forground.
Cay anybody plz tell me how to find the date on which report was run last time.
Thanks and Regards
Sachin Yadav

Hello Sachin,
I agree with Thomas on this. That would be the simplest & fool-proof solutn. Alternatively, you can try to use the stmts: EXPORT/IMPORT TO DATABASE.
Search in SDN you will find [similar posts|Get IP Address and Report Running Date and time;.
BR,
Suhas
Edited by: Suhas Saha on May 18, 2009 3:44 PM

How to find the programs created by date

Hi all
I would like to find the programs created by date and by report title. Is there any report to find programs by date or by report title..?
Thanks
Prasead K

Hi ,
Can anybody tell me how fo find out the date on which a Tcode was created?
Thanks,
Manjula.s

How to find the table in which data from a structure sits

Similar Messages

Maybe you are looking for