How to know the OMR database from OMA or from OMS

Hi all DBA,
I found an OMA on a server, how to know where is his database repository. ( OMR )
Thanks in advance.

Run
emctl status agent
and check for
Repository URL
Werner

Similar Messages

How to connect the local database of Pesonal Oracle From FormBuilder of develope 2000

I installed developer 2000 with personal Oracle in win95. I opened Oracle Form builder and click connect submenu of File. It prompts for user name, password and Database. I added scott/tiger for user name and password and I do not know what I should add into the database item. I tried to add oracle or Local Database to the database item, but it did not work. I also tried to use system/manager/oracle, but it still did not work.
Please tell me what should I add to the database item.
Thanks

You can use the "Oracle Net 8 assistant", "Oracle Net 8 Easy config" to see if you have the appropriate entry to the server in the local tnsnames.ora file (find it!). I mean that one in the Forms&Reports home, not that one in the Oracle_Home.
Under local I mean the file tnsnames.ora in your application, not at the Oracle Server - this is a common mistake.
You have to have there an entry like:
REKS816.RILA.us =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = bigbluenew.rila.us)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = REKS816)
It is a bad practice, but you can add such entry using simple text editor. But before that make a copy of tnsnames.ora in order to restore it if you do not succeed.
After that go to "control panel" and run "services".
Look at your Oracle_Home_TNSlistener80 process. Stop it! Start it again!
If you work on Unix find the relevant processes and notions of the Unix OS.
Joseph Schwertner
[email protected]

How do the application servers connect the new database after failing over from primary DB to standby DB

How do the application servers connect the new database after failing over from primary DB to standby DB?
We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround.
Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
Oracle support provides us the answer as following:
==================================================================
Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
FAN server-side callouts can be configured on the database tier.
FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
=======================================================================================
Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
Thank very much in advance.

Hi mesbeg,
Thanks alot.
For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
        <subsystem xmlns="urn:jboss:domain:datasources:1.0">
        <datasources>
                <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                    <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                    <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                    <driver>oracle</driver>
                    <pool>
                        <min-pool-size>2</min-pool-size>
                        <max-pool-size>10</max-pool-size>
                        <prefill>true</prefill>
                    </pool>
                    <security>
                        <user-name>TEST_USER</user-name>
                        <password>Password1</password>
                    </security>
                    <validation>
                        <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                        <validate-on-match>false</validate-on-match>
                        <background-validation>false</background-validation>
                        <use-fast-fail>false</use-fast-fail>
                        <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                        <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                    </validation>
                </datasource>
                <drivers>
                    <driver name="oracle" module="com.oracle.jdbc">
                        <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                    </driver>
                </drivers>
            </datasources>
        </subsystem>
If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

How to know the size of a DATABASE ?

Guys,
How to know the size of a DB ?
Also
How to know the size of a TABLE ?
How to get the content of a procedure/view/trigger ?
Inputs are welcome !

How to know the size of a DB ?If you want to know the physical size, query dba_data_files + dba_temp_files. if you need to know the actual consumed space in those files, compute sum of bytes from DBA_SEGMENTS.
How to know the size of a TABLE ?Query all/dba/user_segments.
How to get the content of a procedure/view/trigger ?all/dba/user_source, all/dba/user_views, all/dba/user_triggers.
Message was edited by:
Satish Kandi

How to know the status of concurrent program from back-end in oracle apps

Hi,
Can you please explain me step by step how to know the status of the concurrent program from back end in oracle apps.
Thanks,
Raj

When a record is being updated by a form, if you create a Pre-Update trigger on the block, the trigger will run for each record being updated.
Same thing happens with a Pre-Insert and Pre-Delete trigger.

How do I know the Orchestrator Database name the Runbook server use?

Hi,
On the Orchestrator SQL intance i found two databases.
How do I know the Orchestrator Database name the Runbook server use?
/SaiTech

There should only be one: Orchestrator
Or rather, this is the one it uses. You can have other DBs for different stuff.
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter:
LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

How to know the optimal Degree of Parallelism for my database?

I have an important application on my databae (Oracle 10,2,0) and the box has 4 CPU. All the tables are not partitioned. Should I set the parallel degree by myself?
How to know the optimal Degree of Parallelism for my database?

As far as I am concerned there is no optimal degree of parallism at the database level. The optimal value varies by query based on the plan in use. It may change over time.
It is not that difficult to overuse the PQO and end up harming overall database performance. PQO is a brute force methology and should be applied carefully. Otherwise you end up with inconsisten results.
You can let Oracle manage it, or you can manage it on the statement level via hints. I do not like specifying degrees of parallelism at the object level. As I said, no two queries are exactly alike and what is right for one query against a table may not be right for another query against the table.
If in doubt set up the system to let Oracle manage it. if what you are really asking is how many PQO sessions to allocate then look at your Statspack or AWR reports and judge your system load. Monitor v$px_session and v$pq_slave to see how much activity these views show.
IMHO -- Mark D Powell --

Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?

Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.

Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
http://docs.info.apple.com/article.html?artnum=93069
I hope this helps other people!

How to know the items cost from the production order.

Dear friends,
When We close a production order, if we go to the summary tab we can see the total cost of the real component and cost of the real item. My question is how to know the cost of every component used for the real product? I run the stock Audit report, and there I see a field named Calcprice, in what table where can I find this field? to get the cost individual for each component in the moment i close the PO.
Thanks a lot.
Daniel

Thanks a lot to everybody.
You are right Thanga,
That is the data I need, but how can I get it via query because I dont find the field to know the cost in the exactly moment when is created the receipt of productiion. I was trying to locate in tables IGN1 -- IGN12 but I dont get the cost field.
Do you have any idea how can I make a report?
Best Regards,
Daniel

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How to know the progress of the Sync when I call PullAsync()

Hi,
I am developing a Windows 8.1 app, In that I am using offline data concept using Azure mobile services with JavaScript Backend.
My questions is how can I show the status or progress of the Sync When I call PullAsync() method.... I want to show the number of records sync or how much percentage synced like that...
private async void ButtonPull_Click(object sender, Windows.UI.Xaml.RoutedEventArgs e)
await todoTable.PullAsync();
//How to know the progress of sync
await RefreshTodoItems();

Hi Narendra,
I suggest you to check this information for more details.
PullAsync() call can either pull all items from the remote table, or just pull a subset of the items. Only pulling some items from the table is often advisable, as stuffing everything from the (potentially large) remote database table into the (restricted by
the device memory) local table may have some bad performance implications. You can pass an OData-formatted query to select which items to pull from the server, or you can also use the (more friendly) Linq expressions to determine the query of items to be pulled.
var localTable = client.GetSyncTable<TodoItem>();
var query = localTable.Where(t => !t.Complete);
await localTable.PullAsync(query);
var localItems =
await localTable
    .Select(i => i.Text)
    .ToListAsync();
AddToDebug("Items from the server (in the local table): {0}",
string.Join(", ",
localItems));
One important thing to notice regarding pull operations – if there are items in the pending synchronization queue, those items are first pushed over to the server, then the pull operation takes place. That prevents a scenario where an update is done to a
local item, but a pull operation would overwrite the changes locally and potentially leave the data in an inconsistent state. That’s one the first synchronization rule: a pull triggers a push. In the example below, the insert operation for the “Buy milk” item
will first be pushed to the server, then the items will be pulled into the local table.
await client.SyncContext.InitializeAsync(store);
AddToDebug("Initialized the sync context");
var localTable = client.GetSyncTable<TodoItem>();
var item =
newTodoItem { Text =
"Buy milk", Complete =
false };
await localTable.InsertAsync(item);
var query = localTable.Where(t => !t.Complete);
await localTable.PullAsync(query);
var localItems =
await localTable
    .Select(i => i.Text)
    .ToListAsync();
AddToDebug("Items from the server (in the local table): {0}",
string.Join(", ",
localItems));
for us to better understand both Push() and pullasync() feature is used while querying from the Database.
http://blogs.msdn.com/b/azuremobile/archive/2014/04/07/deep-dive-on-the-offline-support-in-the-managed-client-sdk.aspx
Girish Prajwal

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How to share the same Database Connection when using several Task Flows ?

Hi All,
I’m using JDev 11.1.1.3.0.
I’m developing ADF Fusion Applications (ABC BC, ADF Faces…)
These applications are deployed on a Weblogic server.
Each application has only one Application Module.
All Application Modules have the same connection type defined: JDBC DataSource : jdbc/GCCDS
It is working fine.
I’ve also developed Task Flow Applications for small thinks that are reused in multiple main applications.
Each Task Flow Application has also one Application Module with the same connections type as main applications.
All these task flows are deployed to JAR file (ADF Library JAR File) and are reused on my main applications. (drag and drop from the Resource Palette to ADF Regions….).
There are some parameters passed to Task Flows, so that they can filter data depending on which main applications they are called from.
Everything is working perfectly.
All my main applications are using more and more task flows. Which is nice for the reusability etc…?
Only ONE PROBLEM: DATABASE CONNECTIONS.
Every Task Flows service made a database connection. So one user may have 10 database connections for the same adf page. And when there are 100 users that are working at the same time, it becomes a problem.
How to share the same database connections for the main applications and all task flows which are used in the main application?
Best Regards
Nicolas

Hi John,
When I open a ADF Library JAR file of one of my task flow. (gcc_tf_recentSites.jar)
I can see TF_RecentSitesService.xml and TF_RecentSitesServiceImpl.class in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service folder
+ bc4j.xcfg in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service\common folder.
bc4j.xcfg details are
+<?xml version = '1.0' encoding = 'UTF-8'?>+
+<BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">+
+<AppModuleConfigBag ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<AppModuleConfig DeployPlatform="LOCAL" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model" name="TF_RecentSitesServiceLocal" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+<Custom JDBCDataSource="jdbc/GCCDS"/>+
+</AppModuleConfig>+
+<AppModuleConfig name="TF_RecentSitesServiceShared" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService" DeployPlatform="LOCAL" JDBCName="gccdev" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model">+
+<AM-Pooling jbo.ampool.maxpoolsize="1" jbo.ampool.isuseexclusive="false"/>+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+</AppModuleConfig>+
+</AppModuleConfigBag>+
+</BC4JConfig>+
So, it seems that the Application Module is packaged with the task flow....
Is it normal ?
Regards
Nicolas

How to make the price in PO to adopt from info-record and not changeable?

Hi Xperts,
Can somebody explain to me how to set the PO price to be adopted from the info-record and is NOT CHANGEABLE at the creation and change of PO screen. I know that i can configure the field selection for the PO type to be "price as display" only. Any other solution?
Thanks.

Hi!
tick the check box info-update at the item detail under master data tab in a PO.
its significance is as follows:-
Info record update
    Determines whether the prices and conditions of this purchase order item
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
Dependencies
     You can specify that prices and conditions in purchasing info records
     are only allowed at plant level in the Purchasing IMG, under Conditions
     -> Define Condition Control at Plant Level.
Hope this helps you,
Regards,
Archit.

How to know the amount of ora 11g page-out memory (sga and pga)?

How to know the amount of oracle 11g page-out memory ( sga and pga) in the SunSolaris 10 Unix and Linux.
I need to know how many oracle memory are being page-out ( all and for a one oracle server process).
thanks

You can monitor the paging with vmstat or sar commands.
http://download.oracle.com/docs/cd/B28359_01/server.111/b32009/tuning.htm#sthref500
You can also get the paging information on OEM home page if configured for your database.
But I don't know if there exists a method with which one can find out how much memory per session/server process is getting paged out.

How to know the OMR database from OMA or from OMS

Similar Messages

Maybe you are looking for