How to learn the advanced functions of mail?

How can I learn to use Apple Mail, especially how to do newsletters and manage mailing lists?  There is next to nothing in the help, and nothing on Lynda (where I have an account).  Any suggestions?
Thx in advance.

Thanks for the reply.  What I specifically want to do is:
1.  import lists of email addresses, either from mails sent to me or
2. import lists from other sources i.e. word docs or rtf an xls or whatever is the right way to do it.
I know how to create groups, but is there a way to automate the process i.e. import a list of addresses and create a group directly from that without having to enter each address manually.
Then, once I have the groups created, I'll do my mail as I normally would and mail it out to the group.  No problems with that either, but, I would like to learn how to make more professional looking mails including links, graphics and formatting that appear properly in other mail apps and on mobile devices.
I don't want to ask you to hold my hand and walk me through it but rather ask where to look for training (free or paid).
Best,
Clay

Similar Messages

  • Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

    I am currently away from my MAC and want to send an email through apple mail with the bcc functionality.  I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help.  Thanks!

    Open your mail,
    lower left corner click on settings,
    go to composing and check BCC, save and your done

  • How to get the current function name in java

    How to get the current function name in java.
    In c it is done as
    printf("%s",__func__);
    Thanx in advance.

    j0o wrote:
    System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
    "/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
    "/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
    I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

  • How to empty the spam box on Mail

    How to empty the "Spam box" on Mail (Mavericks) when the function on the menu bar is grey (instead of black)?

    Mail Preferences, Junk Mail. Set it to Move it to the Junk mailbox.
    If you don't have the Junk Mail preferences set to move it to the Junk mailbox, then that item will not be active.
    If you don't have that set, the spam is likely being moved by your email provider.
    If you don't want to change the settings, try selecting all of it in the Junk Mailbox and delete it. That would move it to Trash, I think. However, I don't have any junk email at the moment to try that.

  • How to learn the Business Process and how it is related to BI?

    Dear Experts,
    How to learn the Business Process? for example the business process from finance to sales. As I am more involved in technical development of BI; I dont know or having very hard time to understand what the business process. And how the Business Process is related to BI?
    I think if I don't understand the business process than it is very hard to satisfy the User requirements. If you have any documentation please feel free to forward it to [email protected]
    I wish you happy new year. Thank you in advance.
    Aslam.

    If only plan data entered, try to delete the planning data before delete the object and then re-create it again. Otherwise you may have to leave it as is and change the description for the usage by the different company code.

  • How to remove the sort function on the drill down and then save

    how to remove the sort function on the drill down and then save in the  change local view of the Query
    Is it possible to change the porperties of any characteristic in the local view and then save?
    If so please post the answer.

    I do not think that option is possible.
    Regards,
    Venkata Boga.

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • How to use the CMS functionality in Sun Portal Server 7.2

    Hi All,
    How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
    Has any one used this as I could this in glass fish server.
    Any Input is appreciated.
    Thanks & regards
    Srikanth

    Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
    http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
    Alternatively,
    1. ccd.war has 3 portlets in it:
    (a) custom content definition portlet
    (b) custom content portlet
    (c) workflow portlet
    2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
    (a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
    3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
    Note: In windows, you may not find this file
    4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
    (OR)
    you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
    Hope this helps!

  • How to use the divide() function in bpel

    Hi All,
    How to use the divide() function in bpel.
    pls can u give the one sample example

    2 div 4
    Eg;
    <assign name="Assign_1">
    <copy>
    <from expression="2 div 4"/>
    <to variable="outputVariable" part="payload"
    query="/client:testProcessResponse/client:result"/>
    </copy>
    </assign>
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

    MacBook Pro (Retina, 15-inch, Late 2013)
    2,6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 750M 2048 MB
    OS Yosemite,
    Finder versión 10.10.1
    Mail Versión 8.1 (1993)
    In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
    1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
    2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
    3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
    Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
    1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
    2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
    3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
    4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • How to setup the Advance payment in Oracle Payroll

    Dear Friends,
    Can any one pls let me Know,How to setup the Advance payment in Oracle Payroll.. Pls ..
    with regards
    Veeru

    GLOBAL HRMS , XX_legislation
    Plz help

  • How to disable the purchase function?

    Anyone know how to disable the purchase function from the ipad2? How to disable and empty the payment credit card inform? If not, is it secure?

    None for payment
    After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".

  • How to extract the content of a mail message?

    Friends,,,
    How to extract the content of a mail message?
    the message does not contain any attachments or images.
    its just a plain text..
    if i use message.getContent(), in addition of the content it returns headers information also...
    but i need only the content of that message...
    if i write code like this:
    String content = (String) message.getContent();
    it gives cast exception...
    if the message contains only plain text, no multipart, then which method is useful to extract only the content?
    please tell me friends..
    thanks in advannce,
    regards,
    Venkata Naveen

    Message.getContent() does not return headers for a simple text/plain
    message. If you're getting headers, something else is wrong.
    Also, casting the result to String should work.
    Most likely the message really isn't a simple text/plain message.
    Provide more details and we'll help you figure out what you're
    doing wrong.
    Also, please read the msgshow.java demo program included with JavaMail.

  • How to use the set functions effectively in webi ,please let me know with detail

    how to use the set functions effectively in webi ,please let me know with detail

    Hi,
    we use use set functions on heirarchies with aggregate functions mostly .
    If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
    Member_set can include multiple sets separated by semicolons (;).
    The list of member sets must be enclosed in {}.
    If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
    Eg .
    1)     Ancestor
    =Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
    2)     IsLeaf
    =[Test Hierarchy].IsLeaf
    You can use this function when you want to show your Measure only at lower level .
    3)     .Depth
    =[Test Hierarchy].Depth
    This is also function used with hierarchy to find Level of Members .
    Follow this link for PDF reference .
    Page 147
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
    search on SCN this question was discussed before also one those links .
    http://scn.sap.com/thread/3183380
    Hope this will help you .

  • ALPS pointing device - how to restore the scrolling function

    Until a couple of days ago, my mousepad allowed me to scroll. I've tried looking at the settings in control panel/mouse but the options have disappeared.
    Is it a driver issue? If so, which driver should I download, and where from?
    The current driver is:
    v5.3.203.18
    and was created 17/07/2003
    If it's not a driver issue, does anyone have any suggestions on how to restore the scrolling function?
    Many thanks :)

    Thank you for your replies :) Unfortunately, I can't rollback as system restore has been turned off as well as all the other odd things that have been happening.
    Eldorado, I'll give your suggestion a try :)
    Once I've uninstalled and rebooted, will the laptop definitely find the driver automatically when it starts up?
    I'm worried that it won't, and that I won't be able to use the computer...

Maybe you are looking for