How to link a virtual host to a domain name( Domain has DNS Hosting)

Hi guys, just can't seem to figure this one out! Would be great if i can get some help!
Thanks in advanced!

However, im worried now that when i go to install updates, it's gonna say i have an invalid serial code like it did for my Mac OSX 10.5
Without some details on what the particular antecedent here was, the following is a guess.
Was this the erroneous duplicate serial number "fun"?
There has been a [10.5.8 v1.1 fix|http://support.apple.com/downloads/MacOS_X_Server_10_5_8_Update_v_11] released for the [double-NIC duplicate serial number (mis)detection problem|http://discussions.apple.com/thread.jspa?threadID=2106334] that's been reported.
See [HT3607|http://support.apple.com/kb/HT3607] for additional details on the update.
The [10.6.1 update includes a fix|http://support.apple.com/kb/HT3811] for Snow Leopard Server, which shared this issue.
And in general and barring a critical fix, it's often best to allow the updates a week or four to settle out on the test servers (and on server at other sites) before loading them on production servers. (Yes, this is a fairly aggressive schedule. Some production sites I work with have a six month or longer "settling" interval designated, and some very serious regression tests.)

Similar Messages

How to configure Apache Virtual Hosts?

Hi, I was wondering, how does configure Apache virtual hosts for Mac OS X Client 10.4.5? At this time, I have added
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /Library/WebServer/Documents/janus
ServerName janus.php.test
ErrorLog /private/var/log/httpd/janus.php.com-error_log
CustomLog /private/var/log/httpd/janus.php.com-access_log common
</VirtualHost>
Finally, when I try to use the name in the browser, I get the following error message:
Safari can’t find the server.
Safari can’t open the page “http://janus.php.test/” because it can’t find the server “janus.php.test”.
Well, I must go and thanks in advance.
Peace,
-Conrad

If you want to use the fqdn you defined and can/do not want to register it as a Internet Domain you can add it to the hosts file in /etc/hosts if you are comfortable using terminal and the shell
open a terminal
and use the following commands
cd /etc
sudo vim hosts
(you will be prompted for your password here, enter it and hit return)
in vim scroll to the last line which will look like
::1 localhost
type
i
(you are now in insert mode)
type the following line
192.168.0.15 janus.php.test
(replace the ip address with the ip address of the host in question)
hit Control-C
type
:w (vim will confirm in the last line)
type
:q
you are back at the terminal
test your new hosts file by typing
ping janus.php.test
Hope this helps
Mike

How to configure multiple virtual hosts for the same context root /

Hi,
I am using Glassfish V1 U1 - b14 on Solaris.
I am trying to configure two applications to be mapped to the / root context, each one in its own virtual host.
Two things I have noticed:
1. I have to manually add virtual-hosts="hostId" in domain.xml/application-ref ... looks like just simply deploying the app does not do that although the application is set as default for its particular virtual host. Is this a bug?
2. Although I have set for each virtual host the default web-app correctly, and they both respond fine, I cannot map both of them to the / context. The second application (chronologically deployed) does not respond when called with the / context ....
Any ideas? Is this a bug again?
Regards,
Rares
Message was edited by:
raresp

Wow, that's a shame. All mighty Application Server and two different apps on two different virtual hosts are considered ambiguous to have the same context root definition.... Fair play to Tomcat and 90% of the rest of servlet containers!
In my case I have the same EAR we are planning to deploy to many (up to 30) virtual hosts. Faking different context roots for each deployment will bring unnecessary overheads...
Should I file a bug or feature request?
Thanks again for your answer, although you're basically saying it is not possible I will wait and look a while for a possible solution before bringing this topic to a conclusion.

How to set up Virtual Hosts in Apache (OS X Server 10.9)

I want to host more than one website on my mac mini with OS X Server 10.9
1.) I edited /etc/apache2/httpd.conf for uncommenting the include line:
# Virtual hosts
Include /private/etc/apache2/extra/httpd-vhosts.conf
2.) I edited /etc/apache2/extra/httpd-vhosts.conf and added:
<VirtualHost *:80>
    ServerName cammino-al-dente.net
    ServerAlias www.cammino-al-dente.net
    DocumentRoot "/Library/Server/Web/Data/Sites/cammino-al-dente.net"
    ErrorLog "/private/var/log/apache2/cammino-al-dente.net.com-error_log"
    CustomLog "/private/var/log/apache2/cammino-al-dente.net-access_log" common
    ServerAdmin [email protected]
</VirtualHost>
<VirtualHost *:80>
    ServerName sutterer.net
    ServerAlias www.sutterer.net
    DocumentRoot "/Library/Server/Web/Data/Sites/sutterer.net"
    ErrorLog "/private/var/log/apache2/sutterer.net-error_log"
    CustomLog "/private/var/log/apache2/sutterer.net-access_log" common
    ServerAdmin [email protected]
</VirtualHost>
3.) then I edited /etc/hosts/ to spoof my IP address to the domains:
127.0.0.1
localhost
127.0.0.1
cammino-al-dente.net
127.0.0.1
www.cammino-al-dente.net
127.0.0.1
sutterer.net
127.0.0.1
www.sutterer.net
255.255.255.255
broadcasthost
::1
localhost
fe80::1%lo0
localhost
Then I restarted Apache...But nothing happens :-(
I could reach my website cammino-al-dente.net only by using the Server Default-entry, chancing the entry to my cammino...-folder
Regards
Fred Mario

In the /etc/apache2/extra/httpd-vhosts.conf file check this line exists:
NameVirtualHost *:80
This solve same issue for me.
I hope it's help.

How to properly setup virtual hosts on leopard server

I am not just new to leopard server but new to “server” as a whole. I have bought a 10-client leopard server and installed it on my old macbook couple of days ago because of the gui and seemingly ease-of-setup of a leopard server. I have watched and followed a tutorial on Lynda.com to install my server. Unfortunately, that tutorial focuses mainly on running a single web server. My main purpose of setting up the leopard server is to run multiple virtual hosts. Now my server (which has its own public ip address and I shall refer to it as just IP) is up and running but I seem not to be able to get virtual hostings to work properly. Below is a summary of what I have setup and I hope somebody from the community can take a look and point out what I have done wrong (thanks in advance):
- server setup as advanced
- dns settings:
o I am not sure whether a different zones should be setup for each domain, so I have opted to define 1 primary zone only and then define the other domain as a machine. For simplicity sake, I have only used two domains in the example below. I actually need to setup at least half a dozen.
o primary zone
• my1stdomain.com. is the primary zone name
• ns.my1stdomain.com. is the only nameserver
• mail.my1stdomain.com. is the only mail exchanger
• www.my1stdomain.com. as machine and IP as value
• www.my2nddomain.com. as machine and IP as value
• mail.my1stdomain.com. as machine and IP as value
• server.my1stdomain.com. as machine and IP as value
• ns.my1stdomain.com. as machine and IP as value
o reverse zone
• ip reverse mapping ns.my1stdomain.com.
- web settings:
o sites:
• I have defined the following 2 sites and point each of them to a different folder:
• my1stdomain.com
• my2nddomain.com
- I have setup dns at my domain registrar to reference ns.my1stdomain.com for both my1stdomain.com and my2nddomain.com,
I have no problem accessing www.my1stdomain.com but I couldn’t reach www.my2nddomain.com. and I have a hunch it has to do with my dns settings.

It sounds like there are two compounding errors here.
• www.my1stdomain.com. as machine and IP as value
• www.my2nddomain.com. as machine and IP as value
By definition, www.my2nddomain.com cannot be a record in my1stdomain.com's zone.
You MUST have one zone for my1stdomain.com (that contains my1stdomain.com's NS, MX, mail, www etc. records) and a SECOND, separate zone for my2nddomain.com that contain's its records.
Now the records in my2nddomain.com's zone may contain the same data (e.g. the same A record), or even reference my1stdomain.com (e.g. 'www.my2nddomain.com is a CNAME to www.my1stdomain.com), but they are separate zones.
Secondly.
I have defined the following 2 sites and point each of them to a different folder:
• my1stdomain.com
• my2nddomain.com
If you want to access the site via 'www.my1stdomain.com' (or 'www.my2nddomain.com') then your site needs to be setup for www.my1stdomain.com, not my1stdomain.com
As far as the web server is concerned, 'my1stdomain.com' is a completely different address (and therefore a different site) from 'www.my1stdomain.com. While most poeple set them to the same it is entirely appropriate and valid for them to be two different sites as far as the web server is concerned.
Therefore you need to change your sites' configuration to reference the 'www' version of its hostname.
If you want to run both 'my1stdomain.com' and 'www.my1stdomain.com' as the same site then add the other hostname under Aliases (this tells Apache what hostnames should map to this virtual host).
Try fixing those two elements and try again.
Finally, it's often far easier for others to debug this kind of problem when you talk in real names, not dummy ones. Telling us what the domains in question are, for example, would allow others to query DNS to see what values you're actually publishing, and would go a long way to answering the question for sure, as opposed to just speculation.

How to get a virtual host name from application in Tomcat?

Hi,
Is it possible to obtain the context path and virtual host name at the application (.war file) initialization stage?
I need to set up these info into my application config table.
Thanks

I think it is impossible. It seems the application has no access to the host configuration which it is running in.

How to add a virtual host on AppServer 10G R3?

Hi, where can I found a guide to add a virtual host for 10G R3?

I guess you ment 10.1.3.X with 10GR3?
Anyway, just start here and look for virtualhost: http://download.oracle.com/docs/cd/B32110_01/web.1013/b28948/toc.htm

How to link yahoo email & automatically update display name in im

foremost, got myself a new 8520...i'm actually surprised how somewhat integrated/very user-friendly blackberry is..so far, it seems to be the best device in the business in terms of messaging/communication...i'm still an android user tho... anyway, couple of questions :
1. you know you can "link" im ids to contacts easily, how to do it when you receive an email and you want to link/insert the email address of the sender to an existing contact ? you can do that but you have to copy and paste instead of "link to bb contact" like you do with im ids.
2. probably its feedback for future upgrade, if you want to link/add an emai id to your contact, it'll more practical if you highlight the sender's (display) name and just link to contact, yet under this contact the actual email address is shown+saved rather than the display name.
3. if you link an im id for example yahoo messenger to a contact, should the display name automatically be that of the contact name instead of manually changing the display name for each contact ?
4. hopefully in the near future, there's only 1 messaging app instead of having ym, google talk, bbm separately....
thanks.

foremost, got myself a new 8520...i'm actually surprised how somewhat integrated/very user-friendly blackberry is..so far, it seems to be the best device in the business in terms of messaging/communication...i'm still an android user tho... anyway, couple of questions :
1. you know you can "link" im ids to contacts easily, how to do it when you receive an email and you want to link/insert the email address of the sender to an existing contact ? you can do that but you have to copy and paste instead of "link to bb contact" like you do with im ids.
2. probably its feedback for future upgrade, if you want to link/add an emai id to your contact, it'll more practical if you highlight the sender's (display) name and just link to contact, yet under this contact the actual email address is shown+saved rather than the display name.
3. if you link an im id for example yahoo messenger to a contact, should the display name automatically be that of the contact name instead of manually changing the display name for each contact ?
4. hopefully in the near future, there's only 1 messaging app instead of having ym, google talk, bbm separately....
thanks.

How to link nickname on contact to Mail sender name

On iOs the sender name is replaced in Mail by the nickname described in Contacts.
On OS X Mail, this does not happen and You still see the complete mail address.
How to replace the complete mail address with the nickname ?
Something new on OS X Yosemite ?
Thanks for your support.
Kind regards.

Phil Appleraily wrote:
On iOs the sender name is replaced in Mail by the nickname described in Contacts.
On OS X Mail, this does not happen and You still see the complete mail address.
How to replace the complete mail address with the nickname ?
Something new on OS X Yosemite ?
You likely need to wait for Apple to implement the iOS features in OS X. They are very much separate, but getting closer.

Exchange2003 - How to allow a specific sender while the domain has been block from "sender filtering"

We have a Exchange 2003 SP2 Ent server. And we have blocked a specific domain by adding it on Global Settings - Message Delivery - Sender filtering
*@abc.com. It has been set for over a few years and until recently one of our user voice out that she can't receive a legitimate mail with
[email protected] Since there are lots of junk and malicious mail from abc.com, our manager is not willing to remove that domain from sender filtering. How can I exclude that specific address from sender filtering?
I've try on "Connection filtering -Configure an exception list to the block list service rule" to exclude that RECEIPIENT (To allow the user to receive every mail, buts seems only work for the mail blocked by "block list service" )
Is there any method to allow that user to receive the specific email address?
Thanks!

HI,
It will not be possible as the filters are applied in the sequence below
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Refer to the below for more detailed explanation
http://www.msexchange.org/articles-tutorials/exchange-server-2003/security-message-hygiene/order-which-Exchange-2003-SP2-Connection-Filters-applied.html
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Blog: Http://theinfraguys.com
Follow me at Facebook http://www.facebook.com/theinfraguys
Please remember to click 'Mark as Answer' on the answer if it helps you in anyway

Tomcat 4.0.1 & Apache 1.3.22 & mod_webapp & virtual hosts

I have succesfully been able to get tomcat 4.0.1 and apache 1.3.22 to use mod_webapp in both linux and windows.
First problem:
If I don't include a trailing slash, my webapp will not display. Just a 404. mod_dir works on the apache end. Also if I access my context thru tomcat on port 8080, without a trailing slash, it will put one in for me. Only when using mod_webapp, it doesn't seem to work.
So...
http://localhost/examples <--- doesn't work
http://localhost/examples/ <--- works
Second problem:
How can I get virtual hosts working with mod_webapp? I've successfully been using mod_jk for a while now with virtualhosts, but there are no instructions on how to do this with mod_webapp. Has anyone been able to do this? Is it even possible? Is there a way to alias a /webapp to '/' or something?
Any help/suggestions are appreciated,
Tom

Unfortunately, Tomcat 4.0.1 use the port number 8180 as default. Just after the installation, you need to test it by typing:
http://localhost:8180/
If the index page of Tomcat appears, then you succeed.
On linux platform the webapps directory need to be downloaded for a separate package. For downloads, please visit here:
http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0.1/rpms/tomcat4-webapps-4.0.1-1.noarch.rpm
Such webapps should be installed in {TOMCAT_HOME}/webapps. After all, just restart the Tomcat server (as I know) and see the results by typing:
http://localhost:8180/
Click on the link to see further examples.
Good luck!

Console shows web application deployed to server but not to the virtual host yet things still work, huh?

I finally figured out how to get the virtual hosting piece to work in
wls811. Now I have a question about the console presenting me with some web
app information. The Web Application Modules node and the Deploy tab shows
me the application is deployed to the server and it's Active, however the
console indicates the web app is not deployed to the virtual host and is
inactive. But the server is resonding to requests for each of my Virtual
Host Names, so they must be deployed to the virtual hosts as well.
Anyone with some ideas? Thanks.

do you see any deployment exception in the server.log ? if nothing please post the web.xml and sun-web.xml

SAP LVM 2.0 Provisioned/Cloned Virtual Hosts

Hi All,
Could you please let me know how to define a virtual host in SAP LVM 2.0.
I have configured Virtualization Manager in SAP LVM 2.0 and added the virtual host to SAP LVM 2.0, But I am not able to see configured virtual host cloning screen.
Kindly suggest me on this.
Thanks and Regards,
Prasad

Hi Michael,
Thank you, we have configured virtualization Manager in LVM and host agent is also installed on virtual host.
Thanks and Regards,
Prasad

Apache virtual hosts

Hello,
I have a enabled http access to my G4 and also FTP. I now would like to host my other sites.
How can I enable virtual hosting?
I have looked at documentation relating to this but have come unstuck as I have tried to look for the areas in the httpd.conf file that controls this. I think I found it but I'm not at all unix or command-line savvy so I don't wish to stuff it up. I have also looked through Apaches' on line documentation but I cant find any straight forward "this is what to change and this is how to change it" document. There seems to be much to do through terminal in order to allow virtual hosts, and there is also security which I believe is contained in other apache files. The mac is standalone and I think I need to allow it to be inetd? Is that right?
Is there alternative software apart from apple server, that a novice like me can learn from or allow me to set these up through a gui?
Thanks for your help

Hi--
sorry for the delay in responding have been away for
xmas, will ask for advice on the apache boards,
You can also ask for advice here. Unless the Apache boards have an area specifically for Apache on OS X, you could get confusing advice. Apple's Apache uses a different file layout than Linux, for example. Also, the Apache on OS X is still version 1.3, so you can get confusing advice there, too.
but I
will give nedit a go to see what it does.
If you find nedit too daunting to install (it requires X Windows, for example, so you'd need that), you should look at Bare Bones' TextWrangler (if you're not already using BBedit, that is). You can use it to open the Apache configuration files. There's even an Apache Configuration Language module that works with TextWrangler. To install it into TextWrangler, just substitute "TextWrangler" in the path given on the Daring Fireball page. It works like a champ with either BBEdit or TextWrangler.
Do you think it would be worth
investing in apple server?
If all you want to do is to set up virtual hosts on your computer, I don't think it's worth it. I haven't used the GUI tools for setting up so I don't know how good they are, though.
But it's pretty simple to set up a virtual host on regular OS X. Basically, you open up the Apache configuration file. If you're using TextWrangler, and you installed the command line tool, it's as easy as typing this in the Terminal application:
<pre class="command">edit /etc/httpd/httpd.conf</pre>TextWrangler will take care of the proper authentication when it comes time to make changes or save your file.
The first thing to look for in your httpd.conf file is the NameVirtualHost directive. By default, it's commented out (has a "#" in front of the line):
<pre class="command">#NameVirtualHost *:80</pre>Just remove the "#" from the front of the line.
Then, a little further down, there's an example host but it's commented out:
<pre class="command">#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost></pre>I always leave that alone, but start my virtual hosts just below that. It can be as simple as this:
<pre class="command"><VirtualHost *>
DocumentRoot "/Library/WebServer/sitedirectory"
ServerName www.domain.com
</VirtualHost></pre>You can, however, get fancy and add all kinds of directives into that block, customizing your virtual host as much as you want. My suggestion would be to try setting up a virtual host and see where you get stuck, then post back with questions.
As for messing up the httpd.conf file, don't worry about it too much. There's a "default" copy of the file in the /etc/httpd directory that you can always go back to. Or, do what I do before I'm about to try something that could turn ugly: make a copy of the current configuration file:
<pre class="command">sudo cp /etc/httpd/httpd.conf /etc/httpd/httpd.conf.cmbak.1</pre>Where I just incremement the "1" on the end. Or I put the date on there: httpd.conf.cmbak.20061229. That way, I always have the current file to fall back on...
And don't forget: any time you make a change to the httpd.conf file, you have to stop and restart the web server! That's so easy to forget. Also, if you're changing the configuration, these two Terminal commands will be your friends:
<pre class="command">/usr/sbin/apachectl configtest
/http -S</pre>
The first one tells you if you have any syntax errors in your configuration file, the second will tell you about your virtual host setup.
charlie

Determine Virtual Host Name

I'm trying to figure out how to obtain the virtual host's name that a particular piece of code is running under. I am using Oracle 9i OAS.
I was looking at the ServletContext object, thinking I could get the virtual host name. However, that looks like a dead end. I've tried many other things like looking at the JNDI tree, and I don't see anything that might help.
Can someone help me with this?
Thanks

If it is just for administrative purposes, then you could add the virtualhost to your access log format.
If it is in your application, you might get some results from the http headers. Please do mind that this is no real secure option. Setting a cookie in combination with some server side context variables is better (but more work to implement).

How to link a virtual host to a domain name( Domain has DNS Hosting)

Similar Messages

Maybe you are looking for