How to link several 4 state buttons to an one image area?

HI
I've created a page with several 4-state buttons. I am trying to have a specific image show up in a target area when a specific button is selected. When i go into my states palette, all of the buttons show up in states 2-4. I can set this up easily to be roll-overs but i really want them to be buttons and i can't figure out how to get one image for each button. HELP!
thanks!

Button symbols are self-contained so it may be a little trickier to do this. Try adding a hotspot on top of each button symbol and create the disjoint effect from the hotspot, rather than the button symbol slice.
NOTE: You may have to put the rollover effect on a 5th, 6th, 7th etc.. state.
You could also try opening the Behaviors panel and adding the effect directly from the panel, using the button slice.
HTH

Similar Messages

My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to create a 3-state button (similar look as OK button) that toggles between 3 different colors.

How do I create a 3-state button that looks similar to the OK button except it changes to 3 different colors every time it is pressed. Does anyone have such a control ready for use that I can just drop in my front panel?

With a picture ring you can implement a 3 color button without any code. Look at the attached customized control.
I have imported the picture of a boolean in three different items and
colored them. I centered the text and hide/made transparent uneeded
graphic elements. I set the size of the decrement arrow to cover all
the picture and made it transparent so when you click on the control
you decrement the value of the ring and change the picture/color
Edit: you'll notice that the picture is not fullt covered by the
decrement arrow so if you click near the bottom of the button, the
picture ring will show its normal behavior displaying all 3 available
items
Message Edité par Jean-Pierre Drolet le 07-07-2005 10:07 PM
LabVIEW, C'est LabVIEW
Attachments:
3COLORSBUTTON.vi ‏8 KB

How do I make a transpose button for just one instrument in a split? (mainstage)

I work in mainstage 2.2.2 with patches using splits and I want to make an octave button for just one instruments in a patch. Suggestions?
Benny

Depending on your virtual instrument you can assign octave to a MIDI control. If you assign all of them to the same control on every track then that would be the effect, but like I said before, it really depends on which instruments you use.

How to make authorization to different planning level on one planning area?

now the situation is one planning area call one global company, under that we create several planning level for serveral sub-company. The authorization should that one sub-comp. only can display, change his planning level, and can not display any other sub-comp. So, in this case how to make authorization? Thanks!

I didn't create an authorization variable on sub-comp. pls, let me know how to create an authorization variable on sub-comp, and the info for the next steps. thanks!

How can I 'cut and paste' a part of one image to another?

I have this program the creates great syfi looking planets and some other cool stuff. I creates them
on a solid black background. I'm hoping there is a way to cut out just that planet and paste it onto
the sky of another picture. I don't want the black background just the planet. I can go in and make
the edges look nice after it's done. But I don't know how to do it :-(
Thank You.

1. use the selection tool(s) of your choice to select the planet. It helps to give the selection a one or two pixel feather to avoid a cutout look (Select>Feather).
2. Copy it (ctrl+C in windows, command+C on a mac)
3. Paste it (ctrl+v in windows, command+v on a mac)
You will get better results if both images have the same ppi before you start (image>resize>image size. If you need to make a change for one image, make sure Resample Image is OFF.) You can use the Move tool to arrange/resize the object once it's in the destination photo.

How to link Files to different buttons in a drop-down list?

I have 5 Excel files in folder. I want to link each file to each buttons in a Drop-Down List, so that when 1st button is clicked it opens 1st file, 2nd button opens second file etc..
the buttons are given some titles.
The file path should not be visible to the user. When a button in drop down list is clicked, it must confirm the file and open it.
I am new to labview. Can anybody help me witha sample code?
Sunitha

Hello,
I think you can get some ideas from this exemple.
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
launcher.vi ‏89 KB

How to merge several rocket launch photos to make one photo?

I took several pictures, seven to be exact of a rocket launch at night, thinking that one long exposure might make some sections of the photo too bright. The beach is a little underexposed, but that is OK. What I can't figure out is how to join them? I thought I would use the first one as the base and basically merge the others after I take out all of the content except the rocket plume/flare, but when I try this, it puts the rocket plume in the middle of the layer and I would have to manually align the rocket trail, but can't seem to do it very easily. I'm only trying to cut and paste, and obvious newbie to elements. I have just upgraded to 12 but still have 9 on my machine if one is any better than the other for doing this type of thing.
Any step by step instruction or pointing me to a youtube video that does a similar thing would be much appreciated!
Keith

This link was posted a few days ago. I think you'll find it helpful as it gives some good instructions on using opacity, rotate and nudge to help you get the images aligned.
Make a composite image in Photoshop Elements
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How to gather several scanned file type document into one pdf file?

I don't know if I make myself clear...
anyway, thank you in advace for your answers!
leya
tiger Mac OS X (10.4.4)

Hi, leya.
I presume the scanned documents have been saved as individual PDFs.
To combine PDFs:
• If you have Adobe Acrobat, either Standard or Professional Edition, you can combine PDFs by opening one of the PDFs and then using Document > Insert Pages to add additional PDFs to the first you have opened, then save the combined PDF either replacing the first PDF or using File > Save As... to save the combined PDF with a different file name.
• If you do not have Acrobat, you can download and use any of the these third-party tools. In particular, Combine PDFs is both freeware, popular, and highly rated.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

HOW TO DISPLAY CURRENT DATE TIME IN MASTHEAD IN BRANDING IMAGE AREA

Hi experts,
I need to display current date time in masthead also and also i should change the welcome area to my own text there how it is possible.....
and plz tell detail coding also as i dont have idea to change the coding plz help in this............
where to chan ge and how to change.............
waiting for u r responses......................
Regards,
Shilpa.

Shilpa,
go to system administratioon-system configuration-support-support desk-browse deployment-check for com.sap.porta.navigation.masthead.par and download it to nwds.
when you import it to NWDS jar file will be missing so you need to manually add that to PORTAL-INF/private/lib.
once you do this go to HeaderiView.jsp in PORTAL-INF/jsp folder.
write
<%= new java.util.Date()%> after <hbj:form id="HeaderForm">.for that matter u can write this at any line after this statement
once you do that select qucik par upload from the tool bar and deploy it.
go to system administration-system configuration-support-support desk-administration console and upload the par file
before following these steps take a backup of par file
reward points if helpful

How to import RAW and JPEG, but see only one image?

This is driving me crazy.
I shoot sometimes RAW and sometimes JPEG on the same memory card. So some pictures have only a JPEG file, others (the ones I shot in RAW) have a RAW+JPEG pair (or at least, Aperture sees it that way when displaying the content of the memory card).
What I want:
- import only once
- for JPEG files, JPEG is imported as master
- for RAW files, RAW only is imported as master
There seems to be no combination of the import settings that lets me do this?!?!?!?
If, under the "RAW+JPEG Pairs" settings I select "RAW files only", all JPEG files DISAPPEAR from the import list. WHY? This setting should be for "RAW+JPEG Pairs" only, it should not affect images that only have a JPEG file. I want to import JPEG files as well, so I select "Both (RAW as master)". Now, in the imported project there are TWO images to deal with, which is not what I want.
Even if I were to import twice, how can I exclude the duplicates?

Please ignore my post. Aperture behaves correctly. I got confused because many pics look alike, but aren't really the same pic. Sorry for the confusion.

Problem: CS4 - opening several tabs - when I move/zoom one image rest move too

Hi I am having a problem with CS4. I am using tabbed views. So i have several images up at the same time and when I zoom or move around my canvas it seems to effect the rest of my tabbed documents open aswell. It seems I have an option checked where it would say somethin like "match zoom locations on all tabbed documents" but this is hypothetical beacuse I cant find this option!!
Does anyone else experience this or is there an option to turn this off? Thanks for your help!!
Regards
Andy

Brilliant! Thankyou Mylenium. Can you believe I have been using photoshop for 13 years now and that was baffling me! So simple like I thought it would be.
Thank you again
Andy

How to make spry menubar first button different colour?

Hi
When making spry menubar how do you make the first button or whatever page you are on a different colour to show that you are on that page?
thanks
alix

1. Add a helper script called SpryDOMUtils.js as per
<script src="SpryAssets/SpryDOMUtils.js"></script>
2. Add a function called InitPage or similar that inspects each of the menu items and compares the link with the current URL as per
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
function InitPage(){
Spry.$$('#MenuBar1 li').forEach(function(node){
    var a=node.getElementsByTagName("a")[0]; // finds all a elements inside the li, but we only want the first so [0]
    if(a.href == window.location){
        Spry.Utils.addClassName(node,"activeMenuItem");
3. Add a listener for when the page is loaded. The listener will be the trigger for the function
Spry.Utils.addLoadListener(InitPage);
4. Add a style rule for the activeMenuItem that we, in our function, addedto the current menu item.
.activeMenuItem a {
    background:#a59a84 !important;
    color:#ffffff !important;
The !important bit is to override the JS
Your complete document should look similar to
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet">
<style>
.activeMenuItem a {
    background:#a59a84 !important;
    color:#ffffff !important;
</style>
</head>
<body>
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a class="MenuBarItemSubmenu" href="untitled.php">Item 1</a>
    <ul>
      <li><a href="#">Item 1.1</a></li>
      <li><a href="#">Item 1.2</a></li>
      <li><a href="#">Item 1.3</a></li>
    </ul>
</li>
<li><a href="#">Item 2</a></li>
<li><a class="MenuBarItemSubmenu" href="#">Item 3</a>
    <ul>
      <li><a class="MenuBarItemSubmenu" href="#">Item 3.1</a>
        <ul>
          <li><a href="#">Item 3.1.1</a></li>
          <li><a href="#">Item 3.1.2</a></li>
        </ul>
      </li>
      <li><a href="#">Item 3.2</a></li>
      <li><a href="#">Item 3.3</a></li>
    </ul>
</li>
</ul>
<script src="SpryAssets/SpryMenuBar.js"></script>
<script src="SpryAssets/SpryDOMUtils.js"></script>
<script>
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
function InitPage(){
Spry.$$('#MenuBar1 li').forEach(function(node){
    var a=node.getElementsByTagName("a")[0]; // finds all a elements inside the li, but we only want the first so [0]
    if(a.href == window.location){
        Spry.Utils.addClassName(node,"activeMenuItem");
Spry.Utils.addLoadListener(InitPage);
</script>
</body>
</html>
Gramps

Is there a way to create a multi-state button or have a pict ring behave like boolean?

Does someone know of a way to make a multi-state button say (function one, function two,function three, off) or implement boolean-like behavior for a pict ring? I want to be able to cycle through the states without a menu popping up for all possible values. So when I press this button or ring it will go from state-1, to state-2, to state-3 etc.

> Does someone know of a way to make a multi-state button say (function
> one, function two,function three, off) or implement boolean-like
> behavior for a pict ring? I want to be able to cycle through the
> states without a menu popping up for all possible values. So when I
> press this button or ring it will go from state-1, to state-2, to
> state-3 etc.
Place a transparent button over a ring. On button value change events,
or via polling, increment the ring indicator. Better yet, put the value
in a shift register that gets incremented and displayed in the ring
indicator.
Greg McKaskle

How to write the sql statement of my finder function in cmp?

hi,
I create a cmp ejb from table INFOCOLUMN,and I create a my finder function ,which sql statement is :
select * from INFOCOLUMN WHERE employee_id=id
employee_id is a column of the table,and id is the finder function parameter.
The error is : invalid column name
So,how to write the sql statement.
Thanks .

Mole-
Bind variables are of the form $1, $2, etc., so your query stmt should look like:
select * from INFOCOLUMN WHERE employee_id=$1
-Jon

How to link several 4 state buttons to an one image area?

Similar Messages

Maybe you are looking for