How to list all calendars that are shared to a specific user?

Hi,
Using Exchange Management Shell/Powershell, I want to list all calendars that are shared to a specific user 'myuser'. 
I have tried different approaches; list all calendars for all users and then figure out which ones are shared to 'myuser', list all mailboxfolders for 'myuser' with path 'calendar' and sort out the shared ones, ... No luck so far.
Anybody?
babu

Hi
If you try this command:
Get-MailboxPermission MyUser

Similar Messages

  • How to see all devices that are connected to Apple ID

    How to see all devices that are connected to Apple ID

    Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

  • How to log all messages that are in JtextArea

    Hi all
    how would i log all message that are in the JTextArea????
    i know of java.util.logging but cant find any usefull tutorials on them.......can someone show me the way to go!
    Thanks
    Dilip

    Yeah dude, I could. But what would that accomplish? Oh sure, that may be some cultural pressure; you know, help out a Hindu-bhai kinda thing, but nah... My giving you the answer won't serve to help you in the long run.
    Ask yourself a couple of questions. Shall I log the information simultaneously (to the JTextArea and the file) or shall I write all the information to the text area first and then to the log file? Is the information in the log fle going to be different than that in the JTextArea because, for example, it is needed for audit purposes?
    I hope I stimulated you think more about the requirements and possible solutions.

  • How to remove SANE from the list of scanners that are shared in Preferences

    So I installed SANE for an old scanner, which is now replaced by a new Canon that is supported by native OSX and canon drivers. I therefore uninstalled SANE, the prefpane and all occurrences in the /Library and so on, however it is still being listed as an option in the scanners that can be shared i.e. in System Preferences>Sharing>Scanner sharing.
    How do I go about removing this, any hints?
    I also have this suspicion that this is the root of major issues I have accessing the scanner on my system some times, since I get "scanner communication errors" quite frequently, which are in turn resolved my plugging my scanner off and back on again...I did reinstall the software and drivers that came with the scanner to no avail.
    Thanks

    Hey, I used wonder as well where the information was stored regarding the scanner sharing and I think I found a solution. Here's what I found. Download an application that can edit .plist files, such as Martin Bresink's "Prefedit" or "PlistEdit Pro".
    Go to this location: ~/Library/Preferences/ByHost and find the file "com.apple.ImageCaptureExtension2.[xxxxxxxxxxxx].plist" where X's stands for your specific Ethernet/Airport Mac address.
    Edit the file using the application mentioned and remove your scanner/device (SANE) from the Devices list (remove the device number, ie. 0 or 1 or 2, etc). Save the file. If unable to save, change permissions to own the file, save it, and reset the permissions.
    That removed the shared scanner from my list of scanners in the sharing preference.
    Hope it works.

  • DW5 - How to list all pages that link to a specific page?

    Hi all, I'm using DW5 and need to completely remove a specific page. How can I get DW to check through the whole site and make a list of all other pages that link directly to the page I want to remove?
    I'm sure it must be simple, but can't seem to get the result I need. Can someone spare a few minutes to spell it out for me please?

    I would do a Find on the page name...source code...in the entire local site...and be given a list of pages that include that page name. Then you can go into the Results window, where they are listed, and by double-clicking go directly to each reference.
    You may also save a copy of the report in XML... (the save icon is a small floppy disk image on the left border of the Results Panel.
    Beth

  • How to get all rows that are returned in inner sub query of select statemen

    If a sub query in select statement returns more than one row than how to get all those returned rows in the final
    output of the query .It will be all right if all column's value repeat and that multiple output of inner query comes
    in another column .
    How to get that ?

    As Frank said, you likely want a join, and likely an outer join to replicate the select in the projection. Something like:
    SELECT id,stat, section, USER_ID concerned_person
    FROM table_all,
      left join table2
        on room_id = sectoion and
           sur_role = 'r001'
    WHERE section IN (SELECT code
                      FROM t_area
                      WHERE dept= 'p002')An alternative, depending on where and how you are using the statement would be something like:
    SQL> WITH t AS (
      2    select 1 id from dual union all
      3    select 2 id from dual),
      4  t1 as (
      5    select 1 id, 'One' descr from dual union all
      6    select 1, 'Un' from dual union all
      7    select 1, 'Une' from dual)
      8  SELECT t.id, CURSOR(SELECT t1.id, t1.descr from t1
      9                      WHERE t1.id = t.id)
    10  FROM t;
                      ID CURSOR(SELECTT1.ID,T
                       1 CURSOR STATEMENT : 2
    CURSOR STATEMENT : 2
                      ID DESCR
                       1 One
                       1 Un
                       1 Une
                       2 CURSOR STATEMENT : 2
    CURSOR STATEMENT : 2
    no rows selectedJohn

  • How to list all  tables that belongs to the current user?

    hi all
    "select tblowner,tblname from tables where tblowner in (select user from dual);"
    I want a list of all tables that belongs to the current user. I use the SQL above, but given "no rows selectd",but if
    I replace the subquery with literal,like
    "select tblowner,tblname from tables where tblowner = 'JFMDB');".
    I got the list. why?
    Thnk u very much！

    This looks like a bug that was fixed in 7.0.5.13 and onwards. I can reproduce what you are seeing in 7.0.5.10.0 (Linux x86-64 / Access control enabled instance from root install) but not 7.0.5.13.0 (Linux x86-64 / Access control enabled instance from root install).
    Unfortunately I don't have a bug number to pass on. I can't see anything relevant listed in the Release Notes and I haven't found a likely candidate in our internal listings. This may well have been one that was fixed "in passing" when RnD were working on something similar.

  • How to print monthly calendars that are BLANK?

    Hi. I would like to use Oracle Calendar to print a monthly calendar that does NOT display my existing meetings within each day. In other words, I want to print a BLANK monthly calendar. Can anyone please explain how to do this?
    I'm using Oracle Calendar 10.1.2.3.0.398.
    Thanks in advance!

    Hi
    If you try this command:
    Get-MailboxPermission MyUser

  • How to list all the datatypes are being used in the database?

    Is there any way you can list all the oracle datatypes are being used in the database?
    Thanks,
    Chau

    Use USER_TAB_COLUMNS or DBA_TAB_COLUMNS to determing various data type but USER_TAB_COLUMNS will show you what type being used by a schema user

  • How to list all documents that has linked a image file?

    Hi everyone,
    I'd like to know if there's a way to find all linked file to a file: i have a logo image that a lot of inDesign files have linked to it and i'd like to find all those inDesign files.
    I know that Bridge CS6 can list all linked files of a .indd file but i'd like the opposite
    Regards,
    Snowblood13x

    You might be able to do it via scripting. If you have to search an entire volume it would be impractical, but something like this AppleScript would open all of the ID files inside of a chosen folder and its sub folders. Once the ID file is open it could check for a specific link and if it exists leave the file open otherwise close:
    global mylinkname
    --change YourLinkNameHere to the logo link's name
    set mylinkname to "YourLinkNameHere"
    tell application "Finder"
        activate
        set the thisFolder to (choose folder with prompt "Choose a folder. The extension of all files inside will be hidden.")
        my ProcessFolder(thisFolder)
        tell application "Adobe InDesign CS6"
            activate
            display dialog "Done"
        end tell
    end tell
    on ProcessFolder(thisFolder)
        set theseItems to list folder thisFolder without invisibles
        repeat with i from 1 to count of theseItems
            set thisItem to alias ((thisFolder as text) & (item i of theseItems))
            set the iteminfo to info for thisItem
            if folder of the iteminfo is true then
                ProcessFolder(thisItem)
            else
                ProcessItem(thisItem)
            end if
        end repeat
    end ProcessFolder
    on ProcessItem(thisalias)
        tell application "Finder"
            if creator type of file thisalias is "InDn" and kind of file thisalias is not "InCopy® Lock File" then
                tell application "Adobe InDesign CS6"
                    activate
                    --set user interaction level of script preferences to never interact
                    open thisalias
                    set llist to name of every link of active document
                    if mylinkname is not in llist then
                        tell active document
                            close
                        end tell
                    end if
                    --set user interaction level of script preferences to interact with all
                end tell
            end if
        end tell
    end ProcessItem

  • How to find all routes that are going out an interface in IOS-XR.

    Hi all,
    So if I have the following set up in IOS:
    interface GigabitEthernet7/0/0.265
    encapsulation dot1Q 265
    ip vrf forwarding test
    ip address 1.1.1.1 255.255.255.252
    ip verify unicast reverse-path
    end
    ip route vrf Apollo 2.2.2.0 255.255.255.248 1.1.1.2
    I can see all the routes that are going out the interface using show ip cef command:
    ios-router#show ip cef vrf test GigabitEthernet7/0/0.265
    2.2.2.0/29
      nexthop 1.1.1.2 GigabitEthernet7/0/0.265
    1.1.1.0/30
      attached to GigabitEthernet7/0/0.265
    1.1.1.2/32
      attached to GigabitEthernet7/0/0.265
    In case of IOS-XR (ASR9K 4.3.2 or 4.3.1) the same setup and command shows only
    attached routes:
    router static
    vrf test
      address-family ipv4 unicast
       2.2.2.0/29 1.1.1.2
    RP/0/RSP0/CPU0:TST_riga-sb7-pe-asr9#show cef vrf test bundle-ether2.265
    Prefix              Next Hop            Interface
    1.1.1.0/30          attached            Bundle-Ether2.2220333
    1.1.1.0/32          broadcast           Bundle-Ether2.2220333
    1.1.1.1/32          receive             Bundle-Ether2.2220333
    1.1.1.2/32          1.1.1.2             Bundle-Ether2.2220333
    1.1.1.3/32          broadcast           Bundle-Ether2.2220333
    Is there any command to see all the routes that are going out an interface without complicated parsing
    of the configuration, recursive show cef commands etc.?

    You can accomplish this with the "show route" command.  Here is an example:
    P/0/RSP1/CPU0:ASR9006-E#sh route next-hop tenGigE 0/3/0/2
    Tue Oct  8 15:34:58.046 UTC
    Codes: C - connected, S - static, R - RIP, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
           i - ISIS, L1 - IS-IS level-1, L2 - IS-IS level-2
           ia - IS-IS inter area, su - IS-IS summary null, * - candidate default
           U - per-user static route, o - ODR, L - local, G  - DAGR
           A - access/subscriber, - FRR Backup path
    Gateway of last resort is 172.18.87.1 to network 0.0.0.0
    D    10.95.248.1/32 [90/128512] via 10.129.56.210, 4d00h, TenGigE0/3/0/2
    C    10.129.56.208/30 is directly connected, 4d00h, TenGigE0/3/0/2
    L    10.129.56.209/32 is directly connected, 4d00h, TenGigE0/3/0/2
    O    10.242.142.240/30 [110/20] via 10.129.56.210, 3d11h, TenGigE0/3/0/2
                           [110/20] via 10.129.56.214, 3d11h, TenGigE0/3/0/3
    D    192.168.1.16/32 [90/128512] via 10.129.56.210, 4d00h, TenGigE0/3/0/2
    D    192.168.20.39/32 [90/128512] via 10.129.56.210, 4d00h, TenGigE0/3/0/2
    RP/0/RSP1/CPU0:ASR9006-E#
    Thanks,
    Bryan

  • How can I list all folders that contain files with a specific file extension? I want a list that shows the parent folders of all files with a .nef extension.

    not the total path to the folder containing the files but rather just a parent folder one level up of the files.
    So file.nef that's in folder 1 that's in folder 2 that's in folder 3... I just want to list folder 1, not 2 or 3 (unless they contain files themselves in their level)

    find $HOME -iname '*.nef' 2>/dev/null | awk -F '/'   'seen[$(NF-1)]++ == 0 { print $(NF-1) }'
    This will print just one occurrence of directory
    The 'find' command files ALL *.nef files under your home directory (aka Folder)
    The 2>/dev/null throws away any error messages from things like "permissions denied" on a protected file or directory
    The 'awk' command extracts the parent directory and keeps track of whether it has displayed that directory before
    -F '/' tells awk to split fields using the / character
    NF is an awk variable that contains the number of fields in the current record
    NF-1 specifies the parent directory field, as in the last field is the file name and minus one if the parent directory
    $(NF-1) extracts the parent directory
    seen[] is a context addressable array variable (I choose the name 'seen'). That means I can use text strings as lookup keys.  The array is dynamic, so the first time I reference an element, if it doesn't exist, it is created with a nul value.
    seen[$(NF-1)] accesses the array element associated with the parent directory.
    seen[$(NF-1)]++ The ++ increments the element stored in the array associated with the parent directory key AFTER the value has been fetched for processing.  That is to say the original value is preserved (short term) and the value in the array is incremented by 1 for the next time it is accessed.
    the == 0 compares the fetched value (which occurred before it was incremented) against 0.  The first time a unique parent directory is used to access the array, a new element will be created and its value will be returned as 0 for the seen[$(NF-1)] == 0 comparison.
    On the first usage of a unique parent directory the comparison will be TRUE, so the { print $(NF-1) } action will be performed.
    After the first use of a unique parent directory name, the seen[$(NF-1)] access will return a value greater than 0, so the comparison will be FALSE and thus the { print $(NF-1)] } action will NOT be performed.
    Thus we get just one unique parent directory name no matter how many *.nef files are found.  Of course you get only one unique name, even if there are several same named sub-directories but in different paths
    You could put this into an Automator workflow using the "Run Shell Script" actions.

  • How to find all tables that are associated with a given domain name.

    I want to find all table, excluding the structures, of a given domain name, say, waers.
    Some of the tables are directly contains the domains while others are related with a data element which is connected to that domain.
    I want to find tables for all two case -either tables connected directly to the domain or connected via data element- and exclude the structures.
    thanks in advance.

    Hi,
    The following thing may help you.
    in se11-> search for tables having names like 'DD*'.
    From this list of tables you can find the required table to get domain, data element nad table name.
    one way of doing it:
    SELECT rollname domname
      FROM dd04l
      INTO CORRESPONDING FIELDS OF TABLE it_tab.
    SELECT rollname tabname
      FROM dd03l
      INTO CORRESPONDING FIELDS OF TABLE it_tab1
      FOR ALL ENTRIES IN it_tab
      WHERE rollname = it_tab-rollname.
    SORT it_tab1.
    DELETE ADJACENT DUPLICATES FROM it_tab1.
    LOOP AT it_tab1 INTO wa_tab.
      MODIFY it_tab FROM wa_tab
      TRANSPORTING tabname
      WHERE rollname = wa_tab-rollname.
    ENDLOOP.
    LOOP AT it_tab INTO wa_tab.
      WRITE:/ wa_tab-domname,
              wa_tab-tabname.
    ENDLOOP.
    Regards,
    Manoj Kumar P

  • How to Show All Packages, That are not required by any other package

    I need a way to see al the installed packages thar are not required by any other package
    Thanks in advance ...

    You probably want pacman -Qt or pacman -Qdt
    Check out man pacman.

  • How to know the list of reports that are in usage

    Hello,
    How to know the list of reports that are in use from the last 3 months by the users on Bw server.How basis team will help me in this regard?
    Regards,
    Anand.

    Hi,
    Pl look at following tables if you need any further detailed information
    Table Name  Use of the table 
    RSZELTDIR
    Directory of the reporting component elements
    RSZELTTXT  Texts of reporting component elements 
    RSZELTXREF  Directory of query element references .
    To get a list of query elements built on that cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename] 
    RSRREPDIR
    Directory of all reports (Query GENUNIID) .
    To get all queries of a cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename] 
    RSZCOMPDIR  Directory of reporting components.
    To get query change status (version, last changed by, owner) of a cube. 
    RSZRANGE  Selection specification for an element 
    RSZSELECT
    Selection properties of an element
    RSZCOMPIC
    Assignment reuseable component <-> InfoCube 
    RSZELTPRIO  Priorities with element collisions
    RSZELTPROP  Element properties (settings)
    RSZELTATTR  Attribute selection per dimension element 
    RSZCALC  Definition of a formula element 
    RSZCEL   Query Designer: Directory of Cells 
    RSZGLOBV
    Global Variables in Reporting 
    RSZCHANGES  Change history of reporting components
    Thanks and regards

Maybe you are looking for