How to list all roles which has defined in Oracle BPM

Is there a way to get the list of bpm roles that defined in bpm by using ADF platform?

Metadata rep - Click on the variable in any used query  - Gives you a list of queries where it is used.
Or
Try FM : RRM_SV_VAR_WHERE_USED_LIST_GET & RSZGLOBV for ID
Or
Just try deleting it - It wouldn't let you do that and it gives the where used list.

Similar Messages

  • How to list all documents that has linked a image file?

    Hi everyone,
    I'd like to know if there's a way to find all linked file to a file: i have a logo image that a lot of inDesign files have linked to it and i'd like to find all those inDesign files.
    I know that Bridge CS6 can list all linked files of a .indd file but i'd like the opposite
    Regards,
    Snowblood13x

    You might be able to do it via scripting. If you have to search an entire volume it would be impractical, but something like this AppleScript would open all of the ID files inside of a chosen folder and its sub folders. Once the ID file is open it could check for a specific link and if it exists leave the file open otherwise close:
    global mylinkname
    --change YourLinkNameHere to the logo link's name
    set mylinkname to "YourLinkNameHere"
    tell application "Finder"
        activate
        set the thisFolder to (choose folder with prompt "Choose a folder. The extension of all files inside will be hidden.")
        my ProcessFolder(thisFolder)
        tell application "Adobe InDesign CS6"
            activate
            display dialog "Done"
        end tell
    end tell
    on ProcessFolder(thisFolder)
        set theseItems to list folder thisFolder without invisibles
        repeat with i from 1 to count of theseItems
            set thisItem to alias ((thisFolder as text) & (item i of theseItems))
            set the iteminfo to info for thisItem
            if folder of the iteminfo is true then
                ProcessFolder(thisItem)
            else
                ProcessItem(thisItem)
            end if
        end repeat
    end ProcessFolder
    on ProcessItem(thisalias)
        tell application "Finder"
            if creator type of file thisalias is "InDn" and kind of file thisalias is not "InCopy® Lock File" then
                tell application "Adobe InDesign CS6"
                    activate
                    --set user interaction level of script preferences to never interact
                    open thisalias
                    set llist to name of every link of active document
                    if mylinkname is not in llist then
                        tell active document
                            close
                        end tell
                    end if
                    --set user interaction level of script preferences to interact with all
                end tell
            end if
        end tell
    end ProcessItem

  • How to list all properties in the default Toolkit

    I would like to know what kinds of properties are stored in the default Toolkit (Toolkit.getDefaultToolkit()). I don't know how to list all of them. Toolkit class has a method getProperty(String key, String defaultValue), but without knowing a list of valid keys, this method is useless.
    Any idea would be appreciated.

    Here is a little utility that I wrote to display all the UIDefaults that are returned from UIManager.getDefaults(). Perhaps this is what you are looking for?
    import javax.swing.*;
    import java.util.*;
    public class DefaultsTable extends JTable {
        public static void main(String args[]) {
            JTable t = new DefaultsTable();
        public DefaultsTable() {
            super();
            setModel(new MyTableModel());
            JFrame jf = new JFrame("UI Defaults");
            jf.addWindowListener(new WindowCloser());
            jf.getContentPane().add(new JScrollPane(this));
            jf.pack();
            jf.show();
        class MyTableModel extends javax.swing.table.AbstractTableModel {
            UIDefaults uid;
            Vector keys;
            public MyTableModel() {
                uid = UIManager.getDefaults();
                keys = new Vector();
                for (Enumeration e=uid.keys() ; e.hasMoreElements(); ) {
                    Object o = e.nextElement();
                    if (o instanceof String) {
                        keys.add(o);
                Collections.sort(keys);
            public int getRowCount() {
                return keys.size();
            public int getColumnCount() {
                return 2;
            public String getColumnName(int column) {
                if (column == 0) {
                    return "KEY";
                } else {
                    return "VALUE";
            public Object getValueAt(int row, int column) {
                Object key = keys.get(row);
                if (column == 0) {
                    return key;
                } else {
                    return uid.get(key);
        class WindowCloser extends java.awt.event.WindowAdapter {
            public void windowClosing(java.awt.event.WindowEvent we) {
                System.exit(0);
    }

  • How to handle user preference which has "_" and " " in the name

    Hi Experts,
    I have a question how to handle value which has like "_" and "space" etc in user preference.
    If setting "a_b-c d", I could not retrieve this because it's escaped in database.
    So this code can't get value even though I can set it.
    Is there any restriction of name? Is there any documentation how to code user prefernece which has non alphabet and number in the name?
    I know it's possible to handle the data like adding escaped data. But I don't think this is the best way to retrieve the data. Because nobody confirm it's not problem in the future.
    Could you tell me the best way to get these user preference?
    Thanks in advance,
    Masaaki Tada
    Here is a sample.
    <%@ page contentType="text/html;charset=Shift_JIS" %><%@ page language="java" import="com.plumtree.remote.portlet.*, com.plumtree.remote.prc.*, java.util.*" %>
    <%
    /** * UserInfo - Simple Page * Display User Information*/
    // VariablesIPortletContext oPortletContext = null;IPortletRequest oPortletRequest = null;IPortletUser oPortletUser = null;IPortletResponse oPortletResponse = null;IRemoteSession s;IUserManager oUser;
    /* Get Portlet Objects */
    try{oPortletContext = PortletContextFactory.createPortletContext(request, response);oPortletRequest = oPortletContext.getRequest();oPortletUser = oPortletContext.getUser();oPortletResponse = oPortletContext.getResponse();} catch (Exception e) {oPortletContext = null;oPortletRequest = null;oPortletUser = null;oPortletResponse = null;}
    String val = oPortletRequest.getSettingValue( SettingType.User, "a_b-c d" );String hoe = oPortletRequest.getSettingValue( SettingType.User, "abcd" );out.println( "a_b-c d: " + val );out.println( "abcd : " + hoe );
    oPortletResponse.setSettingValue( SettingType.User, "a_b-c d", "aiueo" );oPortletResponse.setSettingValue( SettingType.User, "abcd", "bbbb" );%>

    Plumtree recommends that user preference names have only alphanumeric characters in them (a-z, A-Z, 0-9). Any non-alphanumeric characters will be encoded by the EDK.
    I strongly suggest that you change your user pref name to something that's alphanumeric. However, if that is not possible, you can use the following workaround: in the web service editor, enter the encoded name for the user pref. There are several ways to get the encoded name.
    One way is to encode the pref manually, yourself. Plumtree uses the %u encoded format: each non alphanumeric character is converted into %uxxxx, where xxxx is the Unicode representation of the character. For all ASCII characters, just look at the ASCII hex chart. For example, character "-" has a hex value of 2d. So, a preference name "jane_pref" would be encoded to "jane%u002dpref", and you'd enter the latter value on the preferences page in the web service editor.
    The other way to find out the encoded value is to set a preference programmatically and use the HTTP tunnel tool to look at HTTP traffic between the portal server and remote server. The remote server will be sending a HTTP header to the portal server (the header name will probably be CSP-User-Pref) and inside the header you should see the pref name, encoded with %u. Just copy it out of there and into the web service editor.
    Hope this helps,
    Jane

  • How to open the period which has already closed in MM

    How to open the period which has already closed in MM.

    1. Lock all users out of PRD
    2. Take snapshot of MB5L for all materials at company code for current and previous periods
    3. Add User parameter MMPI_READ_NOTE with value = current date in this format YYYYMMDD
    4. Stop all processing that updates inventory values
    5. Run t-code MMPI with correct period
    6. Run Z_DEl_HIST_ENTRIES program
    7. Take MB5L snapshot for all materials at company code fs01 for current and previous periods
    8. Validate that values match on MB5L pre-post snapshots or are appropriate.
    9. Unlock all users in PRD
    10. Remove User parameter MMPI_READ_NOTE from user ID
    chander

  • How to upload a file which has more than 999 line item  through BDC ?

    Hello Techards
    Hi to all
    Can any body tell me how to upload a file which has more than 999 line item  through BDC for traction F-02 ?
    Thanks in advance.
    Shovan

    Hello Shovan,
    You split it up to post two accounting documents with the help of a "suspense" a/c.
    Say, you have to post the following line items below:
    line 1 - dr. - GL a/c X - $1000
    line 2 - cr. - GL a/c Y - $1
    line 3 - cr. - GL a/c Y - $1
    line 1001 - cr. - GL a/c Y - $1
    You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
    Doc1
    line 1 - dr - GL a/c X - $1000
    line 2 - cr - GL a/c Y - $1
    line 3 - cr - GL a/c Y - $1
    line 998 - cr - GL a/c Y - $1
    line 999 - cr - SUSPENSE a/c - $3
    Doc2
    line 1 - dr - SUSPENSE a/c - $3
    line 2 - cr - GL a/c Y - $3
    Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
    Hope this helps,
    Cheers,
    Sougata.

  • Sunone Messaging Server 6.1--How to list all mail user's last login time

    hi,i want to know how to list all the mail user's last login time.
    There are more than 100000 mailbox accounts on our mail server,
    i want to know which account is not used for more than 2 or 3 years.
    thanks.

    http://wikis.sun.com/display/CommSuite/imsconnutil
    Somchai.

  • How to list all the rows from the table VBAK

    Friends ,
    How to list all the rows from the table VBAK.select query and the output list is appreciated.

    Hi,
    IF you want to select all the rows for VBAK-
    Write-
    Data:itab type table of VBAK,
           wa like line of itab.
    SELECT * FROM VBAK into table itab.
    Itab is the internal table with type VBAK.
    Loop at itab into wa.
    Write: wa-field1,
    endloop.

  • How to list all files in a given directory?

    How to list all the files in a given directory?

    A possible recursive algorithm for printing all the files in a directory and its subdirectories is:
    Print the name of the directory
    for each file in the directory:
    if the file is a directory:
    Print its contents recursively
    else
    Print the name of the file.
    Directory "games"
    blackbox
    Directory "CardGames"
    cribbage
    euchre
    tetris
    The Solution
    This program lists the contents of a directory specified by
    the user. The contents of subdirectories are also listed,
    up to any level of nesting. Indentation is used to show
    the level of nesting.
    The user is asked to type in a directory name.
    If the name entered by the user is not a directory, a
    message is printed and the program ends.
    import java.io.*;
    public class RecursiveDirectoryList {
    public static void main(String[] args) {
    String directoryName; // Directory name entered by the user.
    File directory; // File object referring to the directory.
    TextIO.put("Enter a directory name: ");
    directoryName = TextIO.getln().trim();
    directory = new File(directoryName);
    if (directory.isDirectory() == false) {
    // Program needs a directory name. Print an error message.
    if (directory.exists() == false)
    TextIO.putln("There is no such directory!");
    else
    TextIO.putln("That file is not a directory.");
    else {
    // List the contents of directory, with no indentation
    // at the top level.
    listContents( directory, "" );
    } // end main()
    static void listContents(File dir, String indent) {
    // A recursive subroutine that lists the contents of
    // the directory dir, including the contents of its
    // subdirectories to any level of nesting. It is assumed
    // that dir is in fact a directory. The indent parameter
    // is a string of blanks that is prepended to each item in
    // the listing. It grows in length with each increase in
    // the level of directory nesting.
    String[] files; // List of names of files in the directory.
    TextIO.putln(indent + "Directory \"" + dir.getName() + "\":");
    indent += " "; // Increase the indentation for listing the contents.
    files = dir.list();
    for (int i = 0; i < files.length; i++) {
    // If the file is a directory, list its contents
    // recursively. Otherwise, just print its name.
    File f = new File(dir, files);
    if (f.isDirectory())
    listContents(f, indent);
    else
    TextIO.putln(indent + files[i]);
    } // end listContents()
    } // end class RecursiveDirectoryList
    Cheers,
    Kosh!

  • Urgent: How to list all alias for a server throw DNS query?

    Hi
    Is there anyone know how to list all alias for a server by asking the network DNS. Is that possible?
    It doesn't work with InetAddress it return a single result.
    Best regard

    InetAddress will not get you the aliases, but you can certainly find all the different IP addresses for a specific host name using the getAllByName() method.
    You won't be able to get the aliases since those IP addresses (assuming there are more than 1) will all be cached as mapping to the name you passed to the getAllByName() method and you can't clear the map cache until the JVM exits.
    So your best hope is to get a list of IP's and either exit your app and restart with a new mode, or save them to a file for another app to read.

  • How to get the records which has a specified x/y coordinates

    Hi,
    How to get the records which has a specified x/y coordinates. I have a table which has street data. And another table has a point data. Now I just want to get the records from street data which includes the points in the point data table. Can any one give your suggestions
    Thanks and Regards
    Aravindan

    Aravinda,
    If you want to find the line segments which intersect the given
    set of points, you can do that with SDO_RELATE.
    siva

  • How to clear the node which has multiple attributes

    Hello ,
               how to clear the node which has multiple attributes.
    I've tried this using the method SET_STATIC_ATTRIBUTES_NULL but it's not working.
    Thanks,
    Sandhya.

    Hello,
    I suggest you to create an internal table or structure clear it and the bind it to the context node.
    Another possibility is to try to invalidate the node (method INVALIDATE of interface IF_WD_CONTEXT_NODE).
    Regards.

  • How to list the JAR files loaded into the Oracle Database ?

    How to list the JAR files loaded into the Oracle Database ?

    From 11.1 onwards, the below two views are available to identify the jar files loaded into the Database.
    JAVAJAR$
    JAVAJAROBJECTS$
    By querying the JAVAJAR$ view you can know information about the JAR files loaded into the Database and using JAVAJAROBJECTS$ view you can find all the java objects associated with the given JAR file.
    These views are populated everytime you use LOADJAVA with "-jarsasdbobjects" option to load your custom java classes.
    But unfortunately this feature is available only from 11.1 onwards and there is no clear workaround for above in 10.2 or earlier.

  • How to localize HumanTask names and process names of oracle BPM process ?

    Anybody known how to localize HumanTask names and process names of oracle BPM process ?

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • How to pull a list of materials which has obolete status set, from 2years.

    Hi All,
    I need to pull a list a of materials which has MM-PP status = 04(marc-mmsta) set on them for the past 2 years.
    i tried fetching this in MARC table but the problem here is, the users have not maintained any date in the Valid from date field(marc-mmstd) for any of the materials, so i cannot find out when exactly the status was set to 04.
    i tried my luck in the table CDHDR but here, i cant find the changes done, for a particular field.
    is there a table where in i can see the changes done to a particular field(say marc-mmsta) so that i can track when exactly the status was set to 04 in the material master and pull in the materials that has 04 status on them for the past 2 years?
    Thanks
    Mahendra

    all changes are stored in CDHDR and CDPOS.
    CDHDR has the header information, e.g. user who made the change and when he did it. The CDPOS has the info about the content of change.

Maybe you are looking for