How to list AUR packages in terminal with yaourt or other helper?

I can list packages I have installed from AUR, for example to find all the developer components of Xfce that I have installed, I can run the following command:
    pacman -Qim | grep -E "Name           : xf".+devel
Which outputs:
    Name           : xfce4-appfinder-devel
    Name           : xfce4-dev-tools-devel
    Name           : xfce4-panel-devel
    Name           : xfce4-session-devel
    Name           : xfce4-settings-devel
    Name           : xfdesktop-devel
    Name           : xfwm4-devel
But, how do I find out if there are other packages that match the same regex pattern available in the AUR, maybe using yaourt? When I try:
    yaourt -Si | grep -E "Name           : xf".+devel
I get no output. When I don't include .+devel, I find out that none of the AUR packages are included. If I try to force it to search the AUR by including -a, it says that's not a valid option.
So, how do I search the AUR from the terminal?

falconindy wrote:
cower transparently supports regex -- but not thanks to the AUR. In reality, the query "xf.*-devel" is actually asking the AUR to search for "xf". The returned results are filtered against the regex "xf.*-devel" and out pops magic.
Yaourt doesn't do this.
I saw that, but Yaourt should be able to simply query the AUR without it trying to install stuff, but how? Does anyone know? I knew yaourt didn't support regex, that's why I was piping the output to grep. It worked for pacman, and works for yaourt when it uses pacman, but I can't figure out how to get it to return the contents of the AUR so I can pipe those contents through grep.

Similar Messages

  • How do I number pages consecutively starting with a number other than 1?

    In Pages, how do I number pages consecutively starting with a number other than 1?

    Inspector > Document > Section > Page Numbering:     click on the dropdown menu

  • How to inspect AUR package PKBUILD and .install files

    Hi,
    Linux and arch newbie here. I was reading the wiki article about the AUR and noticed this bit:
    Warning: Carefully check all files. cd to the newly created directory and carefully check the PKGBUILD and any .install file for malicious commands. PKGBUILDs are bash scripts containing functions to be executed by makepkg: these functions can contain any valid commands or Bash syntax, so it is totally possible for a PKGBUILD to contain dangerous commands through malice or ignorance on the part of the author. Since makepkg uses fakeroot (and should never be run as root), there is some level of protection but you should never count on it. If in doubt, do not build the package and seek advice on the forums or mailing list.
    This is something that have not been doing at all in the past, but I am trying to improve my practices managing my system.
    The problem is, I do not know what exactly I am looking at or for in these files. If I give these files a look over before installing the package, can I honestly expect to spot something malicious? What would I need to learn to notice if something was fishy?
    Anyway, I am not to worried about this practically, because I only use a handful of AUR packages and I usually install ones based on recommendations, not just at random. But it still seemed interesting for the wiki to stress this so strongly. How important is this guidline anyway?
    Thanks!
    [EDIT: spelling]
    Last edited by supernerd (2014-06-25 10:41:13)

    I scan the whole PKGBUILD. I start by ensuring that the source link to the original source looks accurate. For example, take the source line for gmusicbrowser-git:
    source=("${pkgname}::git+http://github.com/squentin/gmusicbrowser.git")
    I know this is the correct link to the source, and so it passes my check. But suppose it had said:
    source=("${pkgname}::git+http://youvebeenhackedhub.com/1337haxorz/gmusicbrowser.git")
    I would become suspicious. Of course this is an exaggeration, but common sense goes a long ways here. At least check the first time..
    With the source verified, I ensure that the md5sum or sha256sum block has a sum. This way, if a download is compromised at the source, the sha256 or md5sum can catch it before you installed (this assumes that the PKGBUILD is not "bad" and has the sum number of a package that wasnt compromised). Note that with git this isnt necessary (the git process protects against such problems). Anytime a tarball is downloaded and extracted however, the sums should be present in the PKGBUILD. If I go to install an AUR package that has 'SKIP' for the md5sum/sha256sum block, I will double or triple check the source of the tarball (or of the patch files enclosed in the build directory, etc..)
    I also look for any "dangerous" commands in the build and install sections. For example, if I see "rm -rf" I had better see something like $pkgdir to start the directory path or be VERY sure the path is "safe". Since makepkg is not run as root this should theoretically not be a problem, but imagine if someone put "rm -rf /home/*" (warning: do not run that command on your system!) in there! This is mostly common sense; in time as you get more comfortable with bash and various linux commands it will make more and more sense and you will be able to spot mistakes.
    Also, consider the user posting the pkgbuild. "Trusted Users" are selected as trustworthy members of the community, so obviously you can feel much more comfortable with PKGBUILDS they have made (Xyne comes to mind..). For people you may not know, check what other PKGBUILDs they have available. After awhile, you develop a trust for certain people whos PKGBUILDs or software you have used. For example, I wouldnt hesitate to build/install using a PKGBUILD put up by BurntSushi since I use some of his software, have personally corresponded with him, and find him to be responsible. You might "develop" such rapport with other AUR users I dont even know about.
    Consider the vote count of a package as an approximate metric. Dont discount a package because it has 0 votes- it may just be that not many people have use for that particular software. Ive considered hosting a PKGBUILD for "xfce4-terminal-nowindowhints"; consider that tilers generally ignore them anyway, and that my package would only be useful for someone literally using xfce4-terminal with pytyle. How high do you think the vote count would be (even if the PKGBUILD had 0 errors)? On the other hand, you at least have a good chance the PKGBUILD is solid if the package has 354 people voting for it.. That said, the package could have been well-maintained before (when it received a ton of votes), and the quality has dropped since- just be mindful of these trends.
    Finally, adding all of these things together will leave the odds of a malicious PKGBUILD affecting your system pretty slim, though its certainly not impossible. I have never (to my knowledge to be fair) encountered a malicious PKGBUILD, though I have found a few that had errors or outdated sources, etc.
    Last edited by GSF1200S (2014-06-29 10:13:50)

  • [SOLVED] yaourt how to update aur packages

    Hi!
    I got a quick question. I thought that yaourt is able to update old packages installed from Aur automatically.
    So for example I type as usually yaourt -Syu --aur but I noticed it doesn't show AUR packages I can update. Only from core/extra/community
    For example I just typed:
    yaourt yaourt
    1 aur/yaourt 0.9.2.6-1 [0.9.2.5-1 installed] (2406)
    and see that I can update yaourt. I have other packages installed from AUR, how do I know that a newer version is available without checking it manually?
    edit:
    so I am happy to mark it as solved. It wasn't a bug, but it is a way how yaourt works.
    yaourt -Syu --aur shows packages from core/extra/community.
    If I press Y (to install them). It shows a list again with the information how much to download and install and then after pressing "No" to install them, yaourt continues to check AUR packages in this case.
    Julien MISCHKOWITZ, the developer said he could change the behavior
    Thanks everyone for the attention!
    Last edited by ngsupb (2009-08-21 13:15:09)

    shining wrote:yaourt has a bug tracker : http://bugs.archlinux.fr/index/proj3?or … &sort=desc
    Thank you shining. I have opened a ticket there. Lets wait, I hope they can help!

  • [solved] how to add aur packages

    I can't seem to figure out how to install packages from aur ive looked at the official page but clearly I am doing something wrong. I am trying to set up rutorrent.
    I added the yaourt but now i'm getting "yaourt" command not found.
    Any help would be great.
    Last edited by Arch-Hoochie (2014-10-07 14:51:04)

    I frequently voice a very negative bias against yaourt - so much so that I almost feel guilty about it now that I'm a moderator (almost).
    But all biases aside, if yaourt is a good tool for anyone, it is only for those who know how the aur works.  It seems you are not yet familiar with the basics, so a tool like yaourt will be a great hinderance preventing any future learning.
    Start out by just downloading the aur-tarballs and use makepkg to build (and even install if you'd like with makepkg -i or makepkg -si).  Once you get the idea of how all the moving parts work, then you can look into a helper tool - but there are *many* beside yaourt.
    The fact that many here have ranted about it over and over, yet the archlinux.fr page still advises new users to run the `pacman -Sy` command (which could very easily cause substantial problems) takes the 'almost' out of my first sentence: I am very comfortable publicly expressing my distaste for yaourt.

  • [Solved] List AUR packages installed and only AUR packages.

    Here's a good one.  Thought this would be easy but thought it over and then looked around a bit and haven't found anything.  There's might just be an easy way to do this that will make me *bonk* my head in the morning but I haven't found it yet.  I'm looking to be able to just list the packages I have installed from AUR and not any that I have gotten from the official repos.  I've checked out some utilities in AUR (like AURcheck) but as far as I can tell they just look for AUR updates.  Anyone know of a way to do this?
    Last edited by Gen2ly (2009-10-30 14:32:22)

    I just got to reinstalling and this was a lifesaver - it worked great.  Thank for the help, brisbin, ghost, Allan...
    @Ghost, I would have used packup but I had a couple downgraded packages and I wanted to be able to troubleshoot it.
    The tip about the grep -v doing 'shortnameplus' was a good tip, Profjim.  I hadn't read this last post before and during the reinstall I was a bit surprised nvidia wasn't installed so... all is good now.
    I created a script to be able to create the backup list and restores from it simliar to ghosts and am able to run it in cron job.  Probably not a big deal, but... phhht.  Here it is for anyone that can use it:
    #!/bin/bash
    # pacbac - Create and restore from list all installed packages
    # Package list locations (official and local)
    pkglsoff=/opt/backup/pc-emach/arch-pkglist-official
    pkglsloc=/opt/backup/pc-emach/arch-pkglist-local
    # Exclude packages
    excldoff=()
    excldloc=()
    # Use filename as program name
    prog=${0##*/}
    # Text color variables
    bldblu='\e[1;34m' # blue
    bldred='\e[1;31m' # red
    bldwht='\e[1;37m' # white
    txtcyn='\e[0;36m' # cyan
    txtund=$(tput sgr 0 1) # underline
    txtrst='\e[0m' # text reset
    info=${bldwht}*${txtrst}
    pass=${bldblu}*${txtrst}
    warn=${bldred}!${txtrst}
    # If restoring, be sure yaourt is installed
    if [[ "$1" == 'r' ]] && [[ -z $(pacman -Qs yaourt) ]]; then
    echo ""
    echo -e "$warn $prog requires ${txtund}}Yaourt${txtrst} to be installed."
    echo -e " ${txtcyn}http://wiki.archlinux.org/index.php/Yaourt${txtrst}"
    echo ""
    exit
    fi
    case $1 in
    b ) # Create list of official repository packages (core, extra, community)
    echo -e "$info Creating list of official (core/extra/community packages) packages installed."
    # Create list, remove local, base
    pacman -Qqe | grep -vx "$(pacman -Qqg base)" | grep -vx "$(pacman -Qqm)" > "$pkglsoff"
    # Create list of local packages (includes the AUR)
    echo -e "$info Creating list of local (includes AUR) packages installed."
    pacman -Qqm > "$pkglsloc"
    echo -e "$pass Official package list saved to ${txtund}"$pkglsoff"${txtrst}"
    echo -e "$pass Local package list saved to ${txtund}"$pkglsloc"${txtrst}" ;;
    r ) # Update repository database, then restore packages from list
    echo -e "$info Installing packages from lists"
    sudo pacman -Sy
    # use -f to overwrite conflicting files
    sudo pacman -S --needed $(cat "$pkglsoff")
    # Yaourt doesn't have --needed check
    yaourt -S $(cat "$pkglsloc" | grep -vx "$(pacman -Qqm)") ;;
    * ) echo -e " pacbac b - build installed packages list. (dir:${txtund}"${pkglsoff%/*}"${txtrst})"
    echo -e " pacbac r - restore installed packages from package list." ;;
    esac
    Last edited by Gen2ly (2009-10-31 14:16:55)

  • How to schedule a package to run with package scheduler in BPC 5.1 MS

    We are on BPC 5.1 Service Pack 2.
    I have a few schedules that run import packages that were set up by a consultant who is no longer with the company. I need to know how to change the userid associated with the package schedules so that they can reflect my name and not the consultant's. I attempted to select the edit parameters but it didn't have the userid on it as an area to update or change.
    Also, how do I create new package schedules to run as I have other packages that I would like to set to run automatically on the system? I did not see an option to create the package schedule in the selections.
    Any help would be greatly appreciated.
    Thanks,
    Eleasha

    I find it easier & more reliable to create a new package schedule, rather than edit an existing one, when trying to change the user. Likewise, I've never been able to transport a schedule from one environment to another. Easier to just set up a new one.
    Go to eData -> Packages Schedule Status to delete the existing job. (Before deleting, make sure you note the scheduling options, and any other package-specific options that have been scheduled.)
    Then eData -> Run package, and choose "schedule" instead of "run now". The schedule here will be set up under the user ID you've used to log into BPC. After you've created the schedule in this way, you can go back later and edit it further (with greater scheduling options) in the "packages schedule status" interface, or via Windows scheduled tasks.

  • [SOLVED] How to install aur packages using pacaur

    I'm trying to install dwb-git. It installs with no problem with aura, but pacaur gives me problems. If I run pacaur as regular user it will build but will not install and will say permission denied.
    If I run pacaur with sudo it will say building packages as root is a bad idea and will quit. The only other possibility I see is running it with --asroot flag which is a really bad idea.
    Last edited by bstaletic (2014-06-22 15:02:41)

    No, I get the errors I described above.
    Here are the outputs:
    bstaletic@arch ~ $ pacaur -y dwb-git
    :: resolving dependencies...
    :: no AUR metadata for dwb-git package
    :: looking for inter-conflicts...
    AUR Packages (1):
    Name Old Version New Version
    aur/dwb-git latest
    :: Proceed with installation? [Y/n]
    :: Retrieving package(s)...
    :: View dwb-git PKGBUILD? [Y/n] n
    :: View dwb.install script? [Y/n] n
    ==> Making package: dwb-git 2014.03.04.g5088db1-1 (Sun Jun 22 15:46:30 CEST 2014)
    ==> Retrieving sources...
    -> Cloning dwb git repo...
    Cloning into bare repository '/tmp/pacaurtmp-bstaletic/dwb-git/dwb'...
    remote: Counting objects: 15056, done.
    remote: Compressing objects: 100% (3796/3796), done.
    remote: Total 15056 (delta 11190), reused 14783 (delta 10952)
    Receiving objects: 100% (15056/15056), 2.63 MiB | 88.00 KiB/s, done.
    Resolving deltas: 100% (11190/11190), done.
    Checking connectivity... done.
    ==> Validating source files with md5sums...
    dwb ... Skipped
    ==> Extracting sources...
    -> Creating working copy of dwb git repo...
    Cloning into 'dwb'...
    done.
    ==> Starting pkgver()...
    ==> Updated version: dwb-git 2014.06.14.g9f4bdb9-1
    ==> Sources are ready.
    :: Building dwb-git package(s)...
    ==> Making package: dwb-git 2014.06.14.g9f4bdb9-1 (Sun Jun 22 15:47:05 CEST 2014)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> WARNING: Using existing src/ tree
    ==> Starting build()...
    Build options:
    CC = cc
    CFLAGS = -march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -Werror=format-security -pipe --ansi -std=c99 -D_POSIX_C_SOURCE=200112L -O2 -g -D_BSD_SOURCE -D_NETBSD_SOURCE -D__BSD_VISIBLE -pthread -I/usr/include/webkitgtk-1.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/libsoup-2.4 -I/usr/include/libxml2 -I/usr/include/webkitgtk-1.0 -I/usr/include/p11-kit-1 -I/usr/include/json-c -I/usr/include/libsecret-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DWITH_LIBSOUP_2_38=1
    LDFLAGS = -Wl,-O1,--sort-common,--as-needed,-z,relro -lwebkitgtk-1.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig -lfreetype -lsoup-2.4 -ljavascriptcoregtk-1.0 -lgnutls -ljson-c -lsecret-1 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpthread -lm -lX11
    CPPFLAGS = -march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DWITH_LIBSECRET
    make[1]: Entering directory '/tmp/pacaurtmp-bstaletic/dwb-git/src/dwb/src/util'
    cc convert_transport_security.c
    convert_transport_security.c: In function ‘handle_pinsets’:
    convert_transport_security.c:256:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    if((name_obj = json_object_object_get(pin_list, "name")) == NULL || !json_object_is_type(name_obj, json_type_string))
    ^
    convert_transport_security.c:263:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    good_hashes = json_object_object_get(pin_list, "static_spki_hashes");
    ^
    convert_transport_security.c:264:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    bad_hashes = json_object_object_get(pin_list, "bad_static_spki_hashes");
    ^
    convert_transport_security.c: In function ‘handle_entries’:
    convert_transport_security.c:297:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    if((name_obj = json_object_object_get(entry, "name")) == NULL ||
    ^
    convert_transport_security.c:307:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    json_object *mode = json_object_object_get(entry, "mode");
    ^
    convert_transport_security.c:315:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    json_object *include_subdomains = json_object_object_get(entry, "include_subdomains");
    ^
    convert_transport_security.c:327:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    if((entry_pins = json_object_object_get(entry, "pins")) != NULL)
    ^
    convert_transport_security.c: In function ‘parse_json’:
    convert_transport_security.c:371:5: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    if((pinsets = json_object_object_get(json, "pinsets")) == NULL || !json_object_is_type(pinsets, json_type_array) ||
    ^
    convert_transport_security.c:380:5: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
    if((entries = json_object_object_get(json, "entries")) == NULL || !json_object_is_type(entries, json_type_array) ||
    ^
    gen hsts_preload.h
    /bin/sh: ./convert_transport_security: Permission denied
    Makefile:41: recipe for target '../../src/hsts_preload.h' failed
    make[1]: *** [../../src/hsts_preload.h] Error 126
    make[1]: Leaving directory '/tmp/pacaurtmp-bstaletic/dwb-git/src/dwb/src/util'
    Makefile:22: recipe for target 'src/util.subdir-buildfirst' failed
    make: *** [src/util.subdir-buildfirst] Error 2
    ==> ERROR: A failure occurred in build().
    Aborting...
    :: dwb-git cleaned
    bstaletic@arch ~ $ sudo pacaur -y dwb-git
    :: resolving dependencies...
    :: no AUR metadata for dwb-git package
    :: looking for inter-conflicts...
    AUR Packages (1):
    Name Old Version New Version
    aur/dwb-git latest
    :: Proceed with installation? [Y/n]
    :: Retrieving package(s)...
    :: View dwb-git PKGBUILD? [Y/n] n
    :: View dwb.install script? [Y/n] n
    ==> ERROR: Running makepkg as root is a BAD idea and can cause permanent,
    catastrophic damage to your system. If you wish to run as root, please
    use the --asroot option.
    :: Building dwb-git package(s)...
    ==> ERROR: Running makepkg as root is a BAD idea and can cause permanent,
    catastrophic damage to your system. If you wish to run as root, please
    use the --asroot option.
    :: dwb-git cleaned
    I get the same errors with -Sya and -Sa flags.

  • [SOLVED] How to install AUR packages with patchname.patch

    Hi all,
    I'm trying to install lottanzb from the AUR and there's are a dependency called par2cmdline 0.4-13 that has a lot of nameofpatch.patch that are included in the AUR par2cmdline 0.4-13 package page that just open up to a url that shows code.
    I created patch files from the code displayed in the url with a text editor and added them to the extracted LOTTANZB folder in my build directory but when I go to build the package with PKGBUILD it runs through a check sum while building and the checks don't match.
    I'm obviously doing something fundamentally wrong here. Can someone direct me?
    Thanks,
    Last edited by bennylb0 (2010-05-28 13:30:16)

    Hi, thanks for reply.
    Sorry, my mistake.
    I did place patch files inside the par2cmdline-0.4 folder. The only reason I created the .patch files and placed them inside par2cmdline-0.4 folder was because the PKGBUILD as well as the other 5 .patch files didn't exist inside the extracted build folder. They only place I could find them was in AUR par2cmdline-0.4 displayed as a url.
    When I copied and created the PKGBUILD as it did not exist inside the extracted folder par2cmdline-0.4 folder I received the following error:- 
    Error autoconf.patch was not found in the build directory and is not a url. That along with 4 others do not exist in the build directory.
    You can see this bellow:-
    [ben@ben par2cmdline-0.4]$ makepkg
    ==> Making package: par2cmdline 0.4-13 i686 (Fri May 28 22:08:21 EST 2010)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
      -> Downloading par2cmdline-0.4.tar.gz...
    --2010-05-28 22:08:23--  http://downloads.sourceforge.net/source … 0.4.tar.gz
    Resolving downloads.sourceforge.net... 216.34.181.59
    Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
    HTTP request sent, awaiting response... 301 Moved Permanently
    Location: http://downloads.sourceforge.net/projec … 0.4.tar.gz [following]
    --2010-05-28 22:08:23--  http://downloads.sourceforge.net/projec … 0.4.tar.gz
    Reusing existing connection to downloads.sourceforge.net:80.
    HTTP request sent, awaiting response... 302 Found
    Location: http://transact.dl.sourceforge.net/proj … 0.4.tar.gz [following]
    --2010-05-28 22:08:24--  http://transact.dl.sourceforge.net/proj … 0.4.tar.gz
    Resolving transact.dl.sourceforge.net... 202.55.147.10
    Connecting to transact.dl.sourceforge.net|202.55.147.10|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 239312 (234K) [application/x-gzip]
    Saving to: "par2cmdline-0.4.tar.gz.part"
    100%[===================================================>] 239,312      179K/s   in 1.3s   
    2010-05-28 22:08:26 (179 KB/s) - "par2cmdline-0.4.tar.gz.part" saved [239312/239312]
    ==> ERROR: par2cmdline-0.4-autoconf.patch was not found in the build directory and is not a URL.

  • How to include aur packages in larch profile? [solved]

    Ive been recently making some live systems with larch and found it quite useful
    Im having problems with including software from aur (such as yaourt) in my livedvd. Is there a way to do this?
    Last edited by mafik (2009-02-18 21:24:54)

    Perhaps use yaourt to build each package from the aur that you want, then copy all those packages to a directory, and use the gen_repo command from the larch (larch/run/gen_repo) package to make that directory a custom repository. That's how I had to add the recompiled aufs package to my larch setup.
    Good luck!
    Scott

  • How to maintain mail package option features with ASMA in mail adapter

    Hi Friends,
    While going through mail adapter sap notes I found that Mail package is deprecated, Can any one please give me an idea how to get these features that is header information (TO,From,Subject)  with ASMA(Adapter specific message attributes)
    Best Regards
    Raj

    This [link |Sender Mail Adapter ASMA issue - due to limitation of length upto 200 only.;address your issues... using header attributes length of the field < 200 might help.
    Have you seen help site
    http://help.sap.com/saphelp_nwpi71/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm

  • [SOLVED] How to submit AUR package updates?

    Since yesterday I started maintaining a package. Unfortunately I don't see how I can update it. Please help.
    Last edited by bstaletic (2014-06-20 17:07:17)

    Oh. I thought it would make a duplicate, thanks.

  • [SOLVED] How to update AUR packages?

    Hi,
    I am new to archlinux. a few days ago i installed my first application from the AUR and now I am wondering: How can i update? I believe that I have to use an AUR helper to do that. Is that correct? And which helper should i use? Any recommendations?
    thanx
    Last edited by turtlefox (2015-05-12 14:36:27)

    ok I understand, fetch the tarball again and building it will work. (that already came to my mind actually)
    However, for long-term use I kind of want a more convenient solution, so I think I will try cower.
    Can anyone tell me how to install cower? At https://github.com/falconindy/cower there is only a zip-file that I can download. The zip file contains the files 'bash_completion', 'config', 'cower.c', 'Makefile', 'README.pod' and 'zsh_completion'. (sorry, but I see no option for including the files in this post) In the README however, there is no information about installation.

  • How to trace Returnable packaging material pending with the Customer.

    Hello Everyone,
    In case of Returnable packaging,
    Is there any standard procedure, by which system can give you number of returnable packaging material with the custome.
    Client's requirement is to have number of pallets with the customer on the Invoice.
    Regards
    Trupti Deulkar

    hi,
    1.Returnable packging issue has a special stock indicator which will show in the Inventor stock with whom the returnable packging material lies in MMBE.
    Follow the link
    http://help.sap.com/saphelp_46c/helpdata/en/dd/560051545a11d1a7020000e829fd11/content.htm
    Thanks
    Shekar

  • How to list folder sizes in Terminal

    I pulled a command off the Internet, but it does not run correctly in my Terminal (using ZSH):
    find $1 -type f -print0 | xargs -0 stat -f'%z' | awk '{b+=$1} END {print b}' | awk '{ sum=$1 ; hum[1024**3]="Gb";hum[1024**2]="Mb";hum[1024]="Kb"; for (x=1024**3; x>=1024; x/=1024){ if (sum>=x) { printf "%.2f %s\n",sum/x,hum[x];break } }}’
    Would anyone be willing to take a look at this and see if you can get it to run in ZSH, or provide another solution that meets the requirement?
    Thank you.

    Thank you, but after some experimentation, this resolved my issue:
    sudo du -kshc *
    Output:
    8.6G
    Applications
    3.4G
    Library
      0B
    Network
    3.9G
    System
    140G
    Users
    4.0K
    Volumes
    2.6M
    bin
      0B
    cores
    4.5K
    dev
    4.0K
    etc
    1.0K
    home
    8.0M
    mach_kernel
    1.0K
    net
    4.2G
    private
    980K
    sbin
    4.0K
    tmp
    384M
    usr
    4.0K
    var
    160G
    total

Maybe you are looking for