How to lmplement table in applet
hi friends
im not known how to implement table in applet using " java.applet.* " class
plz reply as soon as possible..
friend
my project is implemented in applet but as u suggest
for Jtable concept then my project is workingSo you have a JTable and it works? What are you asking then?
What is your applet built with AWT, Swing, something else?
Similar Messages
-
How to implement table in applet
hi friends
i have no idea ,how to implement tables in awt for applet can u suggest way to solve my problem.im using jcreator to implement my project.Crosspost: http://forum.java.sun.com/thread.jspa?threadID=783376
You already got plenty of answers. Why do you ask again? Didn't you like the answers? -
How can you get an applet to obey the CSS z-index attribute?
How can you get an applet to obey the CSS z-index attribute?
I have a DHMTL page with a panel that I want to slide back and forth. But another part of the requirement is to have the panel look like it is sliding under another panel.
The problem is that an applet is on the panel that slides. When the sliding panel move under the stationary panel the applet does not go under the stationary panel, but the reset of the sliding panel does render looking like it is sliding under.
See below.
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ #############*************** ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ #############^************** ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
~ has a z-index of 1
# and * have a z-index 2
# shows above ~ and below ^
^ has a z-index of 3What I am getting with the applet on the panel with a z-index of 2 is the following
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ #############*************** ^ -
- ~ # ^ * ^ -
- ~ # @@@@@@@@@@@@@@@@@@@@ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @@@@@@@@@@@@@@@@@@@@ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ #############^************** ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
--------------------------------------------------------Where @ is the applet. Notice how the applet is on top of the ^ but the panel under it, ^, is under like it should be. All the panels are 1x1 tables with a border. So how can I get the applet on the drawing shown with # and * to follow the rendering of the z-index of 2?Hi,
I have the same problem, and don't know how to solve it, So, i had tried to put my applet in a div tag wih z-index=0, but it still hide my other Dhtml divs with bigger Z-index (z-index =1000)
Have you any idea to solve this.
Thanks
Hakim -
How to access tables/views of an external database provider..
After much trouble I finally managed to setup a second Database Provider that doesn't display the "0 out of 0 connections are good" error by filling in the "Configuration Class" field with "intradoc.server.DbProviderConfig".
But now the problem is actually accessing the tables/views in my newly configured external database provider...
In the Configuration Manager applet when I try to add a new Table or View it only lists the tables contained in the schema of the SystemDatabase database provider (the original one), I've tried running Queries via components trying stuff like SELECT * FROM provider_name.table_name and other similar but obviously it doesn't work...
So... with that said, I just want to know how I access tables or views in my "supposedly" well conected (15 out of 15 connections are good, no errors on the Test Query) Oracle external Database Provider - After searching I was unable to find any information regading any post-provider-setup actions in the Content Server documentation - Does anyone know how to do this?
On a side note, if the database is SQLServer instead of Oracle, with the same configuration and apparently no errors on the database side (other clients access it well) the Query Test of the new database provider returns the following error:
"The provider 'TestSqlSrv' is in error. Unable to create database connection for JDBC:ODBC:SqlSrv. Unable to create result set for query 'select * from dummy'. Invalid Fetch Size Unable to create result set for query 'select * from dummy'. Invalid Fetch Size java.sql.SQLException: Invalid Fetch Size".But I won't even go there yet.... for now I would settle with just knowing how to reference information in the Oracle external database provider...
Message was edited by:
user602700if you are able to, pick up Bex Huff's book the Definitive Guite to Stellent Content Server Development (amazon link: http://www.amazon.com/Definitive-Stellent-Content-Server-Development/dp/1590596846/ref=sr_1_1?ie=UTF8&s=books&qid=1196365101&sr=8-1)
chapter 11 is all about this. -
Adf faces table and applet in jsf page navSubmit not working in IE
Hi
I have a jsf page with adf faces table and applet , previous / next navigation is not working for my table when i add the applet to the same page , it is working in firefox but not in IE .
I have no clue what to change , can any one help. below is the sample code for my jsf page
Best regards
Srinivas
Code follows, not sure how to format the code here
<h:form>
<af:panelPage title="Test Adf faces table and applet">
<af:panelHeader text="Orders">
<af:table value="#{bindings.Orders.collectionModel}" var="row"
rows="#{bindings.Orders.rangeSize}"
first="#{bindings.Orders.rangeStart}"
emptyText="#{bindings.Orders.viewable ? 'No rows yet.' : 'Access Denied.'}"
id="orders" >
<af:column sortProperty="order"
headerText="#{bindings.Orders.labels.order}">
<af:commandLink text="#{row.order}"
id="orderNumber"
onclick="showOrder(#{row.order})"
disabled="false"/>
</af:column>
</af:table>
</af:panelHeader>
<af:objectSpacer width="10" height="10"/>
<af:panelBox>
<f:verbatim>
<div id="appletDiv">
<applet here />
</div>
</f:verbatim>
</af:panelBox>
</af:panelHorizontal>
</af:panelPage>
</h:form>Sorry about the format, it looked okay when i previewed it , now it looks like terrible
-
How to make a scrollable applet
How do I make an applet scroallable? Not a scrollpane within an applet but instead make the whole contentpane for the applet as a scrollable pane if the content within the applet�s contentpane is too small to view all the added content. Or if the applet is added to a frame to be run as an application and the frame size is decreased.
That is, how do I make a scrollpane that fills the whole contentpane for the applet and is resized together with the applet�s contentpane? What do I for example have to add to this little applet to make it�s contentpane scrollable?
public class Applet extends javax.swing.JApplet
public void init()
// Initialization of the applet pane
getContentPane().setBackground(java.awt.Color.WHITE);
getContentPane().setLayout(null);
// Adds some content
JLabel label = new JLabel("Applet application");
label.setSize(100, 20);
label.setLocation(10, 10);
getContentPane().add(label);
}It is probably very easy but I can�t figure it out myself yet, I am still too new to Swing : )Thank you for your answer, but I am not quite happy yet ...
What is it so bad with use of null-layout? I have found that I can use exact positioning using setLocation if I set use null-layout which I can�t with for example BorderLayout. It is even worse, the BorderLayout makes the UI ugly by size of the content to fill one out of five "cells". But I know I am wrong when I say nul-layout is fine because many other also complains on null-layout, I just don�t know why I am wrong?
But any way, with null-layout, something like this ...
JPanel contentPane = new JPanel(new java.awt.BorderLayout());
getContentPane().add(new JScrollPane(contentPane));
JScrollPane scrollpane = new JScrollPane();
scrollpane.getViewport().add(getContentPane());
// Initialization of the applet pane
contentPane.setBackground(java.awt.Color.WHITE);
contentPane.setLayout(null);
contentPane.add(table);do I just get a white empty area. If I instead use a BorderLayout like in your example do the table fill the whole space, and that does not look too beautiful. Couldn�t I instead get a pane with some absolute positioned elements that has some space around them scrollable?
I guess I am on the wrong direction now : ) but I then need someone to teach me why? -
How set tha table boundry and how set table in panal
hi master
sir this is my table code
import javax.swing.*;
import java.awt.*;
import java.util.*;
public class fahimtable extends JApplet {
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
Object[][] rdata = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Knitting", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Philip", "Milne",
"Pool", new Integer(10), new Boolean(false)}
/** Initializes the applet fahimtable */
public void init() {
JTable table = new JTable(rdata, columnNames);
getContentPane().add(table.getTableHeader),BorderLayout.NORTH);
getContentPane().add(table);
initComponents();
private void initComponents() {
==========
sir this give me table but my need is the table in panal
now table cover the all applet
sir how set i table in panal and now i set tha table boundry and header
please give me idea
thank
aamirLearn how to use the forum correctly. This is now your 6th posting on basically the same topic.
Not once have you bothered to reply to an old posting to state whether the answer given was helpfull or not.
You still haven't learned to use the "Code" formatting tags when posting code so the code retains its original formatting.
Twice you've been given links to the Swing tutorial, but apparently you still haven't bothered to read it. There is a section on "How to Use Layout Mangers" that will help you postion your components. The tutorial is full of working examples. -
How set tha table boundry and how set in panal
hi master
sir this is my table code
import javax.swing.*;
import java.awt.*;
import java.util.*;
public class fahimtable extends JApplet {
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
Object[][] rdata = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Knitting", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Philip", "Milne",
"Pool", new Integer(10), new Boolean(false)}
/** Initializes the applet fahimtable */
public void init() {
JTable table = new JTable(rdata, columnNames);
getContentPane().add(table.getTableHeader),BorderLayout.NORTH);
getContentPane().add(table);
initComponents();
private void initComponents() {
==========
sir this give me table but my need is the table in panal
now table cover the all applet
sir how set i table in panal and now i set tha table boundry and header
please give me idea
thank
aamirLearn how to use the forum correctly. This is now your 6th posting on basically the same topic.
Not once have you bothered to reply to an old posting to state whether the answer given was helpfull or not.
You still haven't learned to use the "Code" formatting tags when posting code so the code retains its original formatting.
Twice you've been given links to the Swing tutorial, but apparently you still haven't bothered to read it. There is a section on "How to Use Layout Mangers" that will help you postion your components. The tutorial is full of working examples. -
How get all table name from database
hi master
sir
how get all table name from databaseThe big question is 'why'.
Selecting from view 'dba_tables' will indeed give the list of all tables in the database, but that includes the dictionary tables and the internal tables, and many others that are probably not of interet to a person who needs to ask this question. Besides, the dba_tables view requires access to a DBA account.
There are several other views: "user_tables" will list all the tables in this user's schema; and "all_tables" will list all the tables this user can access in some way.
The above do not, of course, include any information about synonyms, sequences, views, indexes and so on.
The correct answer and the meaningful answer may be two different things. -
How to tell embedded jinitator applet is still running when window closed
Hello, we are trying to accomplish the same thing that is mentioned in this post from Metalink. I've searched for a solution and hope someone here can help. Instead of restating the issue I think David Wilson does a good job of explaining what is needed. Can anyone please suggest a possible solution?
From: David Wilton 07-Oct-05 01:08
Subject: How to tell embedded jinitator applet is still running when window closed
How to tell embedded jinitator applet is still running when window closed
Hi,
We run an oracle 10g forms application through 9iAS over an intranet. All users are running windows 2000 professional.
We run separate frame = true but I would like to switch to separate frame = false
With separate frame = true if the user clicks the outer windows "X" close button (forms mdi window) the user is prompted to save changes before the application ends.
BUT
when using separate frame = false
If the user clicks the upper window "X" button (no longer form mdi window but regular browser window) the window and application is abruptly closed.
I'm interested in using a onbeforeunload function to confirm if the user wants to close the window. This would be placed in the basejini.htm file. This could always ask if the user wants to exit or not. If they click OK then the window closes but if they click "Cancel" you are returned to the forms application exactly where you left. something like event.returnvalue="do you really want to exit?";
However if the user exited using the normal exit form method then the applet is already closed before the onbeforeunoad event fires and there is nothing to go back to and I want the window to close automatically. This is accomplished using close.html file in post forms trigger.
So what I want and what I think many may also want is the check if the embedded applet is still running and if so prompt the user to return to the application or continue to close. Of course If the applet is no longer running then just close because there is no reason confirm closing anymore.
Does anyone have a html/JavaScript solution that can be placed in the jinitiator.htm file? or similar?
Thank you
David
[email protected]
From: Andrew Lenton 07-Oct-05 08:58
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I don't know if this is exactly what you are after but you can add the following to the top of your basejini.htm file and it should prompt the user before exiting the IE window.
<BODY %HTMLbodyAttrs%>
%HTMLbeforeForm%
<SCRIPT>
<!--
window.onbeforeunload = unloadApplet;
function unloadApplet(){
message = "Warning! Please exit the Java Applet prior to
exiting the browser"
return message;
//-->
</SCRIPT>
From: Oracle, mohammed pasha 07-Oct-05 09:55
Subject: Re : How to tell embedded jinitator applet is still running when window closed
David,
Well I could not understand your complete requirement.
Refer to Note.201481.1 How to Close the Browser Window When Closing Forms And How to Simulate SeparateFrame By Javascript
Note.115905.1 How to Close Browser Window When Closing Webforms Applet
Kind Regards,
Anwar
From: David Wilton 07-Oct-05 14:37
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Thank you for your reply and yes you did not understand my question fully.
Sorry if this is a long reply
I am able to close the browser window using information in notes 115905.1 and 201481.1, this is not the issue. We implemented this several years ago. It is workable for both separate frame = true or false.
It is most important to not allow the user to end their forms application by closing the windows browser, they must close using normal form exit commands.
What I want is to have separate frame = false, the big drawback to this option is the user can exit the application and bypass all forms code by pressing the windows "X" close button. This is why we need the code as just provided by Andrew Lenton above in this thread.
BUT Andrew's code will always prompt the user before closing the window and I do not want that. I want the user to be prompted only under scenario 2 listed below.
Here's the 2 case scenario for exiting the application.
1. If the user closes properly and uses exit form which fires all normal form triggers including post_form with it's call to close.html file.
All uncommitted changes are saved or rollback and the users session is ended normally both on the database and in the application server.
All browser windows will close, great all is good. And without Andrew's code the window will close but with Andrew's code the user will be prompted to close or not, if they select Cancel the window will remain but the applet has already ended so why prompt? ...This is what I want to avoid.
2. In the forms app. if the user clicks the windows "X" close button with uncommitted changes. The browser just closes the changes are rollback without prompting the user to save. The users sessions are now lost and still running in the database and application server until they are timed out.
If I use Andrew's code then the user will be prompted to continue to close or go back, if they click Cancel to go back then focus returns to the forms application and the user can continue to work. If the user clicks OK then the window closes and unfortunately their sessions are still lost until timed out.
So what I desire is to add to Andrew's code to check if the embedded applet is still running and prompt the user to close or not accordingly.
Something like:
Basejini.htm like
</HEAD>
<SCRIPT LANGUAGE="JavaScript">
function maximizeWindow()
window.moveTo(0,0);
window.resizeTo(screen.availWidth,screen.availHeight);
function confirm(){
If(document.embeddedapplet.closed())
Win.opener = self;
win.close();
Else if
event.returnValue = "Closing Forms Application. OK to continue?";
</SCRIPT>
<BODY %HTMLbodyAttrs%, onload="maximizeWindow()", onbeforeunload="confirm()">
%HTMLbeforeForm%
I hope this explains my requirements.
David
From: Oracle, Evelene Raechel 10-Oct-05 06:45
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Hi,
Note.199928.1 How to Alert User on Closing Client's Browser Window in Webforms
Regards,
Rachel
From: David Wilton 11-Oct-05 17:40
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I'm sorry this is not helpful at all.
Note 199928.1 is only an alert which does not stop the closing of the window and still displays as an alert if the user does close properly using exit form ... so why would you want to display the alert then?
This is exaclty what I do not want and why I want to determine if the applet is still running before displaying any kind of message.
David
From: Oracle, Evelene Raechel 17-Oct-05 12:23
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Closing thread.
Thanks,Hello,
I had the same issue last year - wanting to provide a warning on closing the browser, but only if the Forms session is still running. The approach I took is described below, see also the thread where I originally posted this at Closing brower window
Hi there,I've had a similar requirement - or rather, the two conflicting requirements: to warn when the browser is being closed, but for the app to be able to close the browser without a warning being fired.
To always provide a warning when someone (the user or the Forms app) tries to go to a different page (e.g. your close.htm), use Javascript like:
function confirmExit(){
if(appletRunning==true) {
msg="Closing this window or navigating to another page will end your SomeGreatApp session.";
window.event.returnValue=msg;
And make a call to confirmExit() in the onBeforeUnload event of your main page.
You'll notice I first check an 'appletRunning' variable before displaying the warning. This Javascript variable is set to true by my app when it starts up, using an embedded Javabean that calls out to Javascript. Once that variable is set to true, then the warning will be displayed if the user tries to shut the browser by clicking on the 'x' button, or to go to a different URL.
When my app is shutting down, it uses the same Javabean to set appletRunning back to false. It then navigates to a close.htm - which will be done without a warning being displayed.
See Re: How can a Javabean call Javascript function of the basejpi.html?? for example code on how to call Javascript from a bean embedded in your Forms app.
Hope these ideas help you out, it's worked for me (so far, anyway!!)
James -
How to move table from one tablespace to other tablespace?
how to move table from one tablespace to other tablespace?
887274 wrote:
how to move table from one tablespace to other tablespace?
alter table <table_name> move tablespace <new_tablespace_name>;
Rebuild the indexes; alter index <index_name> rebuild <new_tablespace_name> online;Example;:
SQL> create table ttt( ID NUMBER PRimary key);
Table created.
SQL> insert into ttt values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME STATUS
SYS_C0010863 VALID
SQL> alter table ttt move tablespace users;
Table altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME STATUS
SYS_C0010863 UNUSABLE
SQL> alter index SYS_C0010863 rebuild tablespace users online;
Index altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME STATUS
SYS_C0010863 VALID
SQL> -
How to use Table valued MSSQL function in OBIEE
Hi all,
Can some one help me to understand how to use table valued function in OBIEE? I want to use a table valued function (MSSQL function, with some input parameter), in the physical layer to pull the data?
I know for MSSQL Stored Procedure we can write as
EXEC SP_NAME @Parameter = 'VLUEOF(NQ_SESSION.Variablename)'
but now I have a table valued function in the query window I can get the data as
select * from myfunction(parametervalue)
In physical layer of OBIEE I have tried as
select * from myfunction('VLUEOF(NQ_SESSION.Variablename)'), but I'm getting error as the NQ_SESSION variable doesn't have a value , but actually I have initialized the variable but still Im getting error.
Can some one help me to solve this.
Thanks,
MithunFollow this link and try yourself. let me know for issues
Substring instr issue in obiee
Appreciate if you mark
Edited by: Srini VEERAVALLI on Feb 20, 2013 8:13 AM -
How to add table in SAP Non interactive forms in webdynpro java
Hi Experts,
I have a requirement in webdynpro java.I have a print button.On clicking print button a pdf will be opened.
This pdf will have data from the webdynpro view.I want to know how to add table in the adobe pdf.The webdynpro view will have many rows of table(rows will keep changing as per the size of the data output).How to send this data to adobe.How do we bind the node to the table in the adobe.How to automatically
Please suggest.
Thanks,
Rajani
Edited by: Rajani Nandagiri on Dec 26, 2008 8:58 AMRajani,
Take a look at below links, it will help you.
[Handling Dynamic Length Tables in Adobe Forms|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0859ad1-53aa-2a10-78ae-99e41c407669]
[Integrate tables & Images in Adobe Web Dynpro|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/dynamic%20non-interactive%20pdf%20form.pdf]
[How to Handle Table Input and Output|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/adobe/how%20to%20handle%20table%20input%20and%20output.pdf]
[How Tou2026deal with Table input and display in Interactive Forms|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00c4041d-188d-2910-6ea2-b4d5155f56e0]
Chintan -
How to get table headers in jsp page
hi,
this is praveen, can any one help me to solve this problem.
how to get table headers in a jsp page. whether it is possible using javascript or is there any other way.
pls send rep.
thank u.Hai ,
I Think This will help ful for u check it ,
File=new FileLog("f:/WebServiceTrace/trace2.%g.log", 800000, 10, new TraceFormatter());
The above code specifies the path for your log file.
Then add this file as a log location and then log the traces. For this you can use the following code like:
Location location=Location.getLocation(className);
location.addLog(file);
location.setEffectiveSeverity(Severity.ALL);
location.entering(methodName);
To Create j2ee apllication
In path new-j2ee-jsp to create JSP's can only be used for J2EE applications.
So as you are using this in Portal Application, this does not work.
You can test this bahavior by creating a new Web Application (New-Project-J2EE-Web Module Project)
In this Web Module Project, try creating JSP, this will work.
So dont use new-j2ee-jsp to create JSP in Portal Application instead use New-File and name the file as jsp.
Regards ,
venkat -
How to find table name for the fields from Standard Extractor in CRM system
How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy
Maybe you are looking for
-
Hi, In my scenario I am sending material i.e Shirts ( item) for ironing process to the vendor as subcontracting ironing service through order. I would like to get back the material from vendor w.r.t PO order and payment to made to service perform
-
Help please
-
We organization are interested in Oracle BI solutions, and can anyone be kind enough to provide the price list of oracle BI components for different licenses? thaks a lot
-
Want to purchase Skype credit but it decline that I have to go to iTunes support
Hi, I just want to purchase Skype credits, but it decline from the iTunes, what should I do now? Thanks
-
Does anyone have any knowledge of importing movies into flash? I have a movie streaming in my flash file but when some people open the exe they only see black when the movie should be showing. And some others can see the movie. Any thoughts?