How to load Cell Text (~8000 bytes) in HFM from a Flat File using FDMEE?

Hi,
There are numerous posts on OTN describing how to load cell text using the Create Memo API. However, we are struggling to know how do we use FDMEE to load Cell text which is about 8000 bytes from a flat file?
Basically HFM gives us the flexibility to enter a Free-Form Cell Text with default size of 8000 bytes (which may be increased). However, when we try to manupilate FDMEE and load this to HFM, there is no place-holder/column in FDMEE Staging tables that has sufficient size to place such a long text. All the ATTR are not more than 20 bytes and UDx columns are only 75 bytes.
Has anyone faced a similar issue and built a workaround for this problem?
Thanks!

Did you consider External Tables ?

Similar Messages

How to load cell text (cell comment) information in Planning

Hi All,
My client is moving from an old budgeting system to Hyperion planning as their budgeting tool. Thats why they want to load the historical budgeting data from the old system to Hyperion planning. One of their requirement is to load historical cell comments from old system to Hyperion Planning. They will be providing us the intersections as well as the cell comment in excel/csv file. I am just wondering how to load that information in one go from excel to hyperion planning. Is there any way to do that. Please help.
Regards
Arijit

Planning backend has HSP_CELL_NOTE, HSP_CELL_NOTE_ITEM tables. By using objectIds for the intersections from the file you can automate insertion of rows into these tables and at the end recycle the planning service.
Hope it helps
Krishna

How to load a swf into an empty movieClip from and as file to flash

i've trying to read up on some flash AS2 stuff. anyone got
some ideas about this. i want to create an emptyMovie in a flash
external as. file and us a loadMove() function to run a swf and
have that get displayed in flash. how would i do that. so far what
i did was create an empty movieclip on my flash stage and inside
that movieclip i have on my 1st keyframe something like #include
"mainSection.as" what should i script in my flash as. file. the
file i'm trying to load is main.swf, x=200 y=50

Check createEmptyMovieclip() in the as-dictionary. That
should get you on
track.
John
"LOGAN_X3" <[email protected]> wrote in
message
news:e6s2hb$jg3$[email protected]..
> i've trying to read up on some flash AS2 stuff. anyone
got some ideas
> about
> this. i want to create an emptyMovie in a flash external
as. file and us a
> loadMove() function to run a swf and have that get
displayed in flash. how
> would i do that. so far what i did was create an empty
movieclip on my
> flash
> stage and inside that movieclip i have on my 1st
keyframe something like
> #include "mainSection.as" what should i script in my
flash as. file. the
> file
> i'm trying to load is main.swf, x=200 y=50
>

How to load delta to 2 target ODS 's from a single ODS using process chains

Hi BW Gurus
I am having a current ODS based on 2LIS_02_SCL, deltas also are working fine for it.
our requirement was based to have 2 target ODS on this existing ODS by using export generate datasource.
I have to build a process chain that should enable us to load delta in our target ODS.
Earlier manually for DEV purposes ,i was using the Update data into data targets from the source ODS, this was enabling us to load deltas. But to automate this process we will require a process chain.
Finally , is there any process type in process chain for " Export generate Datasource".
please suggest a good methodology for this scenario.
Thanks in advance.

Hi Ashfaq,
Loading from ODS to CUBE is same as loading from datasource to ODS only.
1. Create export datasource.
2. Create update rules from ODS(export datasouce) to CUBE.
3. Create infopackages(if you dont want to use generated once).
4. include infopackage in process chain to load fromODS to CUBE.
Intialize first manually and change settings in process chain infopackage to "Delta".
5. You can append/enhance existing process chain(loading from datasource to ODS).
Hope it Helps
Srini

"how to load a text file to oracle table"

hi to all
can anybody help me "how to load a text file to oracle table", this is first time i am doing, plz give me steps.
Regards
MKhaleel

Usage: SQLLOAD keyword=value [,keyword=value,...]
Valid Keywords:
userid -- ORACLE username/password
control -- Control file name
log -- Log file name
bad -- Bad file name
data -- Data file name
discard -- Discard file name
discardmax -- Number of discards to allow (Default all)
skip -- Number of logical records to skip (Default 0)
load -- Number of logical records to load (Default all)
errors -- Number of errors to allow (Default 50)
rows -- Number of rows in conventional path bind array or between direct path data saves (Default: Conventional path 64, Direct path all)
bindsize -- Size of conventional path bind array in bytes (Default 256000)
silent -- Suppress messages during run (header, feedback, errors, discards, partitions)
direct -- use direct path (Default FALSE)
parfile -- parameter file: name of file that contains parameter specifications
parallel -- do parallel load (Default FALSE)
file -- File to allocate extents from
skip_unusable_indexes -- disallow/allow unusable indexes or index partitions (Default FALSE)
skip_index_maintenance -- do not maintain indexes, mark affected indexes as unusable (Default FALSE)
commit_discontinued -- commit loaded rows when load is discontinued (Default FALSE)
readsize -- Size of Read buffer (Default 1048576)
external_table -- use external table for load; NOT_USED, GENERATE_ONLY, EXECUTE
(Default NOT_USED)
columnarrayrows -- Number of rows for direct path column array (Default 5000)
streamsize -- Size of direct path stream buffer in bytes (Default 256000)
multithreading -- use multithreading in direct path
resumable -- enable or disable resumable for current session (Default FALSE)
resumable_name -- text string to help identify resumable statement
resumable_timeout -- wait time (in seconds) for RESUMABLE (Default 7200)
PLEASE NOTE: Command-line parameters may be specified either by position or by keywords. An example of the former case is 'sqlldr scott/tiger foo'; an example of the latter is 'sqlldr control=foo userid=scott/tiger'. One may specify parameters by position before but not after parameters specified by keywords. For example, 'sqlldr scott/tiger control=foo logfile=log' is allowed, but 'sqlldr scott/tiger control=foo log' is not, even though the position of the parameter 'log' is correct.
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\PFS2004.CTL LOG=D:\PFS2004.LOG BAD=D:\PFS2004.BAD DATA=D:\PFS2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\CLAB2004.CTL LOG=D:\CLAB2004.LOG BAD=D:\CLAB2004.BAD DATA=D:\CLAB2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CTL LOG=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.LOG BAD=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.BAD DATA=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CSV

Unable to load Cell Text (Memo A/c) from FDM to HFM..?

Hi All,
I am unable to load Cell Text (Memo a/c) from FDM to HFM. We use Import>validate>export function and use Upsload fucntion in the file to import the data. No errors are shown whilst loading the file and everything gets load except these Memo accounts The issue never arose when we were on version 11.1.1.3. We have recently migrated to 11.1.2.1. I have also checked Application Integration Settings where Cell Text is ticked as enabled.
Can someone help please..
Thanks,
Maneesh

Hi All,
I am unable to load Cell Text (Memo a/c) from FDM to HFM. We use Import>validate>export function and use Upsload fucntion in the file to import the data. No errors are shown whilst loading the file and everything gets load except these Memo accounts The issue never arose when we were on version 11.1.1.3. We have recently migrated to 11.1.2.1. I have also checked Application Integration Settings where Cell Text is ticked as enabled.
Can someone help please..
Thanks,
Maneesh

I have enhanced standard master datasource , How to load the Text for it?

Hi Experts,
I had enhanced 0MATERIAL_ATTR with ZTGRM field.User exit is written and the data is populated and checked in RSA3.
Replicated,loaded in BW side.Activated the master data.It shows only the attribute not the text.
Tried loading 0material_text and loaded successfully, activated but while maintaining the master data , i can able to see only the attribute values not the text.
Can any one help how to load the text for the enhanced attribute?
Thanks in advance
Ganesh Kumar

Hi Tony,
Loaded the 0MATERIAL_TEXT ,also sucessful.
After loading activated the 0material but i could only see values for 0material_attr not for the 0material_text.
Can you tell me how to load the text data to the newly enhanced attribute???

On iphone 4 how do i block text messages that are coming from an email account?

on iphone 4 how do i block text messages that are coming from an email account?

There is no way to block text messages. You may wish to report them to your carrier

How to extract text from a PDF file using php?

How to extract text from a PDF file using php?
thanks
fabio

> Do you know of any other way this can be done?
There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

How do I combine text and photos on the same page in iPhoto using photobook

How do I combine text and photos on the same page in iPhoto using photobook?

You mean while creating a book in iPhoto? Click on the layout button while viewing a page and select the layout that includes both text and photos. Most themes will have those options.
OT

How to load data from a flat file which is there in the application server

HI All,
how to load data from a flat file which is there in the application server..

Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar.

How to to load data from a flat file in selection screen in portal .

Dear All,
I have a question to share : In BEX analyzer i know how i can upload multiple data in selection screen through a flat file , for example if i have to load 200 materials at one go in the selection screen, i can do that in BEX Analyzer . But if i run the same report through portal i am not able to find the upload option through flat file ..... Am i missing some option here ?
Thanks & Regards,
Ashutosh Singh

You will not be able to load through the portal directly. it is possible to load if you can create Visual composer model. that also you will not be able to upload in bulk.

Step by Step details on how to load data from a flat file

hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx

hi sonam.
it is very easy to load data from flat file. whn compared with other extrations methods...
here r the step to load transation data from a flat file.......
step:1 create a Flat File.
step:2 log on to sap bw (t.code : rsa1 or rsa13).
and observe the flat file source system icon. i.e pc icon.
step:3 create required info objects.
3.1: create infoarea
     (infoObjects Under Modeling > infoObjects (root node)-> context menu -
> create infoarea).
3.2: create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
3.3:   create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
    4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create applic...component)
   4.2: create infoSource for transation data(select appl..comp--.context menu-->create infosource)
>select O flexible update and give info source name..
>continue..
4.4: *IMp* ASSIGN DATASOURCE..
(EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
>* DATASOURCE *
>O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
>CONTINUE.
4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE FOR IN FOSOURCE..
> SELECT TRANSFER STRUCTURE TAB.
>FILL THE INFOOBJECT FILLED WITH THE NECESSARY INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
4.6: ASSIGN TRANSFER RULES.
---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
(IF DATA TARGET IS ODS -
INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
--->ACTIVATE...
STEP:5 CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
5.1: CREATE INFO CUBE.
-->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
5.2: CREATE INFOCUBE STRUCTURE.
---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
>MAINTAIN ATLEAST ON TIME CHAR.......(EX; 0CALDAY).
5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
>ACTIVATE..
STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
>SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
> DATASOURCE
> O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
>ACTIVATE.....UR UPDATE RULES....
>>>>SEE THE DATA FLOW <<<<<<<<----
STEP:7 SCHEDULE / LOAD DATA..
7.1 CREATE INFOPACKAGE.
--->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
>GIVE INFOPACKAGE DISCREPTION............_________
>SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
>SELECT EXTERNAL DATA TAB...
> SELECT *CLIENT WORKSTATION oR APPLI SERVER >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
>SELECT PROCESSING TAB
> PSA AND THEN INTO DATATARGETS....
>DATATARGET TAB.
>O SELECT DATA TARGETS
[ ] UPDATE DATATARGET CHECK BOX.....
--->UPDATE TAB.
O FULL UPDATE...
>SCHEDULE TAB..
>SELECT O START DATA LOAD IMMEDIATELY...
AND SELECT "START" BUTTON........
>>>>>>>>>>
STEP:8 MONITOR DATA
> CHECK DATA IN PSA
CHECK DATA IN DATA TARGETS.....
>>>>>>>>>>> <<<<<<<<<----
I HOPE THIS LL HELP YOU.....

How to retrieve IndividualStrings from a txt file using String Tokenizer.

hello can any one help me to retrieve the individual strings from a txt file using string tokenizer or some thing like that.
the data in my txt file looks like this way.
Data1;
abc; cder; efu; frg;
abc1; cder2; efu3; frg4;
Data2
sdfabc; sdfcder; hvhefu; fgfrg;
uhfhabc; gffjcder; yugefu; hhfufrg;
Data3
val1; val2; val3; val4; val5; val6;
val1; val2; val3; val4; val5; val6;
val1; val2; val3; val4; val5; val6;
val1; val2; val3; val4; val5; val6;
i need to read the data as an individual strings and i need to pass those values to diffarent labels,the dat in Data3 i have to read those values and add to an table datamodel as 6 columns and rows depends on the data.
i try to retrieve data using buffered reader and inputstream reader,but only the way i am retrieving data as an big string of entire line ,i tried with stringtokenizer but some how i was failed to retrive the data in a way i want,any help would be appreciated.
Regards,

Hmmm... looks like the file format isn't even very consistent... why the semicolon after Data1 but not after Data2 or Data3??
Your algorithm is reading character-by-character, and most of the time it's easier to let a StringTokenizer or StreamTokenizer do the work of lexical analysis and let you focus on the parsing.
I am also going to assume your format is very rigid. E.g. section Data1 will ALWAYS come before section Data2, which will come before section Data3, etc... and you might even make the assumption there can never be a Data4, 5, 6, etc... (this is why its nice to have some exact specification, like a grammar, so you know exactly what is and is not allowed.) I will also assume that the section names will always be the same, namely "DataX" where X is a decimal digit.
I tend to like to use StreamTokenizer for this sort of thing, but the additional power and flexibility it gives comes at the price of a steeper learning curve (and it's a little buggy too). So I will ignore this class and focus on StringTokenizer.
I would suggest something like this general framework:
//make a BufferedReader up here...
do
String line = myBufferedReader.readLine();
if (line!=null && line.trim().length()>0)
line = line.trim();
//do some processing on the line
while (line!=null);So what processing to do inside the if statement?
Well, you can recognize the DataX lines easily enough - just do something like a line.startsWith("Data") and check that the last char is a digit... you can even ignore the digit if you know the sections come in a certain order (simplifying assumptions can simplify the code).
Once you figure out which section you're in, you can parse the succeeding lines appropriately. You might instantiate a StringTokenizer, i.e. StringTokenizer strtok = new StringTokenizer(line, ";, "); and then read out the tokens into some Collection, based on the section #. E.g.
strtok = new StringTokenizer(line, ";, ");
if (sectionNo==0)
//read the tokens into the Labels1 collection
else if (sectionNo==1)
//read the tokens into the Labels2 collection
else //sectionNo must be 2
//create a new line in your table model and populate it with the token values...
}I don't think the delimiters are necessary if you are using end-of-line's as delimiters (which is implicit in the fact that you are reading the text out line-by-line). So the original file format you listed looks fine (except you might want to get rid of that rogue semicolon).
Good luck.

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

How to load Cell Text (~8000 bytes) in HFM from a Flat File using FDMEE?

Similar Messages

Maybe you are looking for