How to load DataBlock based on the Multiple Condition from another block
Hi
How to load a Data Block based on the Multiple values from another block. For eg.EMP is the Master Data block and SAL is the child Datablock.When query JOS% in the Master Block(EMP) then display all the Sal details in the SAL block for all the employees starting with JOS , When clicking one buton or if it is possible in the loadin of the MasterBlock
Hi,
I presume you are using database block relations.
Put automatic query = yes in relation properties.
Do you have block level trigger ON-POPULATE-DETAILS?
In that you can find the relation and query - Using built-ins
Find_Relation and Query_Master_Details
Similar Messages
-
How to consume a method on the interface controller from another component?
Hello,
I have a project which contains two Components, A & B.
I have exposed a method at the interface controller of Component A. How can I consume it from Component B?Hi,
First add ComponentA as a used webdynpro component in ComponentB. Then open the Interface Controller of B and switch to Properties Tab. Select Add in the "Required Controllers" section. From the dialog that appears, select A's interface controller. Then you can access A's method from B's interface controller as:
wdThis.wdGetAComponentInterface().<method>;
Regards,
Satyajit. -
How can I filter based on the IPTC core information?
How can I filter based on the IPTC core information? (CS6)
"Substitution Variables" can do what you are asking for.
-
How to cummulate the quantity based on the date condition?
hi,
In my query,i need to cummulate the open quantity based on the two date condition.
If my Schedule line date > system date, i need to cummulate the open quantity.
But in my query level i am getting 0 or 1 based on the above condition.
i am struggling to cummulate the open qty based on the above condition.
can any body throws an idea to resolve my issue.
Regards,
ravi.Thanks for suggestion,Almost i narrow down my issue to get the proper result.
But i have one doubt.
Is it possible to user Formula variable (Processing by replacement path-Reference char as Scheduline date) in my Calculated Key Fig calculation.?? But here i am created Scheduline date as Characher infoobject.
Actually i am created Scheduline date as Character InfoObject,If i am using the following condition like
(Schedule line date > system date) its throwing "X" value.
For the above issue,if i am changing the Scheduline date as Key figure InfoObject means i will get the proper output for the condition(Schedule line date > system date) either 0 or 1.
Is it correct????
Regards,
Ravi. -
My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.
If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog -
My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to populate a table based on a row selection from another table.
Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganeshI understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps. -
Availability of material based on the shipping conditions
Dear Friends,
Please mail to me how to configure the availability of material based on the shipping conditions?
That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
With regardsvamsi krishna wrote:>
> Dear Friends,
> Please mail to me how to configure the availability of material based on the shipping conditions?
> That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
> With regards
Hi Vamsi,
Could not understand your query fully.
See material availability check is carried out for the requested delivery date or else the system proposes one.
The time you are talking about By Air 1 day and so on is not taken into consideration while carrying out material check for that is transportation time after goods are released from the Plant.
owever if you need to configure the transportation time you need to go to
Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define shipping types
Here you can define shipping types what you said by AIR by Truck or whatever you need.
To specify the time you need to go to SPRO
Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define Routes and Stages
Here you specify the Transit Duration Transit Lead time and so on which will be taken as a input for determining material lead time by that shipping type.
Hope it helps.
Post if u need furthur clarifications.
Request you to reward points if helpful.
Thanks & regards
Abhishek Swarup -
How to submit a report ,Passing the internal tables from parent report
How to submit a report ,Passing the internal tables from the parent report ?
The SUBMIT statement executes a report from within a report. i.e. you could have a drill-down which
calls another report. Can only execute reports of type '1'.
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
seltab_wa-low = pnppernr-low.
append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
*Example Code (Retrieving list from memory)
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
filler1(01) TYPE c,
field1(06) TYPE c,
filler(08) TYPE c,
field2(10) TYPE c,
filler3(01) TYPE c,
field3(10) TYPE c,
filler4(01) TYPE c,
field4(3) TYPE c,
filler5(02) TYPE c,
field5(15) TYPE c,
filler6(02) TYPE c,
field6(30) TYPE c,
filler7(43) TYPE c,
field7(10) TYPE c,
END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
Submit report as job
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif. -
How to load Cell Text (~8000 bytes) in HFM from a Flat File using FDMEE?
Hi,
There are numerous posts on OTN describing how to load cell text using the Create Memo API. However, we are struggling to know how do we use FDMEE to load Cell text which is about 8000 bytes from a flat file?
Basically HFM gives us the flexibility to enter a Free-Form Cell Text with default size of 8000 bytes (which may be increased). However, when we try to manupilate FDMEE and load this to HFM, there is no place-holder/column in FDMEE Staging tables that has sufficient size to place such a long text. All the ATTR are not more than 20 bytes and UDx columns are only 75 bytes.
Has anyone faced a similar issue and built a workaround for this problem?
Thanks!Did you consider External Tables ?
-
How to copy the Pricing conditions from one Distribution Channel to another
Generally we use VK11 transaction to create conditional records .
but I Need to Know whether is it Possible to copy the Pricing conditions from one Distribution Channel to another with same name and same internal Characteristics .
Since we have around 70+ of Condition type with different parameter Sequence.So Instead of Going for BDC whether is there any standard Funct Modules/programs/BAPIs to do this?
How to make a copy Condition types from One Distribution Channel to another.
since SAP has already provided to copy conditions from Customer to customer.
Likewise i need to know whether SAP is facilitating for these feature also.
Iam Dubious in this issue.
Hope Fully looking for the answers.
Harish.N- IDOC_INPUT_COND_A (you can create IDOC, but also call directly)
- call transaction / batch input (use transaction XK15, as used by LSMW)
- use group of function modules RV_CONDITION_COPY, RV_CONDITION_SAVE, RV_CONDITION_RESET + commit.
if you search SDN on 'RV_CONDITION_COPY' you'll find more info I believe.
Someone mentioned BAPI_PRICE_CONDITIONS as well. -
How can I erase (or remove) the hard drive from a dead Time Capsule?
How can I erase (or remove) the hard drive from a dead Time Capsule?
I found this having had the same problem...
http://forums.macrumors.com/showthread.php?t=553818
Having removed the hard drive I'm finding I can't reformat it. I manage to mount the HD but Disk Utility crashes when trying to format (HD attached to Mac via Newer Tech. SATA cables to USB) and causes what I think is a kernal panic on my Mac which hard crashes. I see 3 partitions when attempting to mount one of which is AFP. Anyone got any ideas about how to do this? I've dug around but the only progress I've made is to note others have had to work around ACL's when replacing the logic board of the TC. Not sure if this even relates to the problem. However the tool for doing this seems to have been removed from SL. (Forum references to this procedure all relate to 10.5). -
How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??
Please help me !!The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes. -
How can I copy and paste the art work from album covers?
How can I copy and paste the art work from album covers?
I don't think the list style transfers. Copy and paste the text in to Mail, select it and then choose "Insert Numbered List" as a work around.
-
How to transfer own -done with the iPad- movies from iPad to PC ?
How to transfer own -done with the iPad- movies from iPad to PC ?
The fotos are possible to transfer, but not the moviesImport photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
Maybe you are looking for
-
How to list mappings used in flow
Hi all Is there a table or view which will list all objects (mappings) used in a given processflow? Any tip appreciated KR Rolf
-
How to set Selected Value in InputSelect
Hi, I have implemented InputSelect component from the BC4J, and the items(attributes) are retrieved and updated to the table correctly. However,there's an additional item, "None" appeared in the menu-list. I didn't insert any item of the value of "No
-
please help me to do this problem to read a sequence of strings looking for duplicated words. The program should find places in the input where one word is followed immediately by itself . keep track of the largest number of times a single repetation
-
Importing contacts from Passport to car phone book
My Passport is great but I can't figure out how to import my contacts into the audio system's phone book in my Mercedes. My car manual says that my"external Bluetooth phone must be able to send vCards via blueltooth" to be able to import the contacts
-
Hi all, I am doing a lab in wich i'm configuring a dual-hub single-cloud DMVPN network. This network consists of two hubs and a spoke, where the spoks is connected with both hubs for redundancy. This all works fine, except 1 thing.. the hubs can´t re