How to load empty column from flatfiles to tables in oracle using aql*loade

HI,,
i am trying to load data from flat files to oracle tables using sql*loader. i got empty column to load. while i am trying it is throwing an error as null colums canot load...
plz help me with this...
Thanks in adavnce..

I believe you need to use 'trailing nullcols' as a parameter in your sql loader command.
See example below:
LOAD DATA
INFILE *
INTO TABLE load_delimited_data
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
(  data1,
    data2
BEGINDATA
11111,AAAAAAAAAA
22222,"A,B,C,D,"
{code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • How to insert select columns from one internal table to another

    Hi,
    How to insert select columns from one internal table to another based on condition as we do from a standart table to internal table.
    regards,
    Sriram

    Hi,
    If your question is for copying data from 1 int table to other ;
    we can use
    APPEND LINES OF it_1 TO it_2.
    or if they have different columns then:
    loop at it_1 into wa_it1.
    move wa_it1-data to wa_it2-d1.
    apped wa_it2 to it_2.
    clear wa_it2.
    endloop.
    thnxz

  • How to remove some columns from an existing table?

    Let's say my table's structure is as follows:
    Table name: EMPLOYEE
    Columns: Name, Birthdate, Gender, Salary, Hometown, Language and so on.
    There are data in the table. Now I want to remove columns Hometown and Language, and I don't care the data loss. Also, there is no constraint.
    What's the sql command to do this? Thanks!

    I think you need to be a bit more specific than stating that something is not correct.
    It is perfectly correct and proper to drop a column from a table even when there is data. The problem comes when you need to drop a column and the window you have to perform the expensive operation of actually reclaiming the disk space is insufficient. If that is the case (and there is no indication from the original poster that is the case, but it's certainly conceivable), it may make sense to mark the column as unused, which is a quick update to the data dictionary and then drop the unused columns at a later date when you have a larger window. This is incredibly useful in a handful of larger systems, but not particularly necessary in most systems most of the time. It wouldn't make sense to mark a column unused and then immediately drop the column.
    If you are going to go the SET UNUSED route, your syntax is incorrect. Once you mark the column unused, you can't drop the column by name any longer (since you can add a column with the unused column's old name, it's also potentially rather dangerous). You have to use the DROP UNUSED COLUMNS clause
    SQL> desc x;
    Name                                      Null?    Type
    COL1                                      NOT NULL NUMBER
    COL2                                               NUMBER
    SQL> alter table x set unused column col2;
    Table altered.
    SQL> alter table x drop column col2;
    alter table x drop column col2
    ERROR at line 1:
    ORA-00904: "COL2": invalid identifier
    SQL> alter table x drop unused columns;
    Table altered.Justin

  • Unable to retrieve data from a nested table in Oracle 8i from JSP

    How do i retrieve data from a nested table in Oracle 8i from my JSP code?
    When i try to execute the query , a general error is thrown.
    Kindly advice as soon as possible.

    How do i retrieve data from a nested table in Oracle 8i from my JSP code?
    When i try to execute the query , a general error is thrown.
    Kindly advice as soon as possible.

  • How to delete a column from the table control in module pool?

    Hi,
      can any one please tell How to delete a column from the table control in module pool?
    thanks in advance
    warm regards
    HareeshKumar N

    hi hareesh,
    I think it is better to hide it.
    How to hide: You can check this link
    Dynamic Hide column in table control

  • How can I select columns from a table EMP, using Select statement?.

    Hi Friends,
    How can I select columns from a table EMP?.
    I want to select columns of EMP table, using select statement.
    Please reply me urgently.
    Shahzad

    Something like this:
    scott@DBA> select empno,ename,job from emp;
         EMPNO ENAME      JOB
          7369 SMITH      CLERK
          7499 ALLEN      SALESMAN
          7521 WARD       SALESMAN
          7566 JONES      MANAGER
          7654 MARTIN     SALESMAN
          7698 BLAKE      MANAGER
          7782 CLARK      MANAGER
          7788 SCOTT      ANALYST
          7839 KING       PRESIDENT
          7844 TURNER     SALESMAN
          7876 ADAMS      CLERK
          7900 JAMES      CLERK
          7902 FORD       ANALYST
          7934 MILLER     CLERK
    14 rows selected.Check the documentation:
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#sthref9697
    Message was edited by:
    Delfino Nunez

  • How to separate perticular column from multidimensionl array

    dear all,
    i am just reading CAN bus message, problem is that it is accomodated in a 11X7 array which includes frame time stamp, ID, byte length etc but i am interested in CAN data. can anybody tell me how to separate that column from all. i want to read a column of 5 with all rows. how it is possible.

    Hello Sanjay,
    If your requirement is simply to obtain a single column from a 11x7 array, I would suggest you should do the following:
    1. Use Transpose 2D array to obtain a transposed array
    2. Use Index Array function to retrieve invidual row (which is actually the column of non-transposed array).
    Use index value of 4 (zero indexed), and the output would be a 1D array containing all elements of column 4 (zero indexed) of the original array.
    I hope this helps.
    Regards,
    Navjodh

  • How to get the columns from SYS.ALL_COLUMNS and use it in COALESCE() Function.

    Hi,
    I have table called Employe. And the Columns are Emp_ID,EMP_NAME,SRC_SYS_CD,DOB
    I have Query like
    Select
    COALESCE(MAX(CASE WHEN src_sys_cd='1' THEN Emp_id END), MAX(CASE WHEN src_sys_cd='2' THEN Emp_Id END))Emp_Id,
    COALESCE(MAX(CASE WHEN src_sys_cd='1' THEN Emp_name END), MAX(CASE WHEN src_sys_cd='2' THEN Emp_Name END))Emp_name,
    COALESCE(MAX(CASE WHEN src_sys_cd='1' THEN dob END), MAX(CASE WHEN src_sys_cd='2' THEN dob END))dob ,
    from Employe
    group by dob.
    I want to generalize the query like get the columns from SYS.ALL_COLUMNS table for that table name and want to pass it to COALEACE() function. I tried with Cursor. But i didnt get the appropriate results.
    Is there any way to achieve this? Please help me out in this regard.
    Thanks,

    Is this the kinda thing you're after?
    Add a filter to the queries to get just a single table/
    WITH allCols AS (
    SELECT s.name as sName, o.name AS oName, c.name AS cName, column_id,
    CASE WHEN st.name in ('float','bigint','tinyint','int','smallint','bit','datetime','money','date','datetime2','uniqueidentifier','sysname','geography','geometry') THEN st.name
    WHEN st.name in ('numeric','real') THEN st.name + '('+CAST(c.scale AS VARCHAR)+','+CAST(c.precision AS VARCHAR)+')'
    WHEN st.name in ('varbinary','varchar','binary','char','nchar','nvarchar') THEN st.name + '(' + CAST(ABS(c.max_length) AS VARCHAR) + ')'
    ELSE st.name + ' unknown '
    END + ' '+
    CASE WHEN c.is_identity = 1 THEN 'IDENTITY ' ELSE '' END +
    CASE WHEN c.is_nullable = 0 THEN 'NOT ' ELSE '' END + 'NULL' AS bText,
    f.name AS fileGroupName
    FROM sys.columns c
    INNER JOIN sys.objects o
    ON c.object_id = o.object_id
    AND o.type = 'U'
    INNER JOIN sys.systypes st
    ON c.user_type_id = st.xusertype
    INNER JOIN sys.schemas s
    ON o.schema_id = s.schema_id
    INNER JOIN sys.indexes i
    ON o.object_id = i.object_id
    AND i.index_id = (SELECT MIN(index_id) FROM sys.indexes WHERE object_ID = o.object_id)
    INNER JOIN sys.filegroups f
    ON i.data_space_id = f.data_space_id
    ), rCTE AS (
    SELECT sName, oName, cName, column_id, CAST(cName + ' ' + bText AS VARCHAR(MAX)) as bText, CAST(cName AS VARCHAR(MAX)) AS colList, fileGroupName
    FROM allCols
    WHERE column_id = 1
    UNION ALL
    SELECT r.sName, r.oName, r.cName, c.column_id, CAST(r.bText +', ' + c.cName + ' ' +c.bText AS VARCHAR(MAX)), CAST(r.colList+ ', ' +c.cName AS VARCHAR(MAX)), c.fileGroupName
    FROM allCols c
    INNER JOIN rCTE r
    ON c.oName = r.oName
    AND c.column_id - 1 = r.column_id
    ), allIndx AS (
    SELECT 'CREATE '+CASE WHEN is_unique = 1 THEN ' UNIQUE ' ELSE '' END+i.type_desc+' INDEX ['+i.name+'] ON ['+CAST(s.name COLLATE DATABASE_DEFAULT AS NVARCHAR )+'].['+o.name+'] (' as prefix,
    CASE WHEN is_included_column = 0 THEN '['+c.name+'] '+CASE WHEN ic.is_descending_key = 1 THEN 'DESC' ELSE 'ASC' END END As cols,
    CASE WHEN is_included_column = 1 THEN '['+c.name+']'END As incCols,
    ') WITH ('+
    CASE WHEN is_padded = 0 THEN 'PAD_INDEX = OFF,' ELSE 'PAD_INDEX = ON,' END+
    CASE WHEN ignore_dup_key = 0 THEN 'IGNORE_DUP_KEY = OFF,' ELSE 'IGNORE_DUP_KEY = ON,' END+
    CASE WHEN allow_row_locks = 0 THEN 'ALLOW_ROW_LOCKS = OFF,' ELSE 'ALLOW_ROW_LOCKS = ON,' END+
    CASE WHEN allow_page_locks = 0 THEN 'ALLOW_PAGE_LOCKS = OFF' ELSE 'ALLOW_PAGE_LOCKS = ON' END+
    ')' as suffix, index_column_id, key_ordinal, f.name as fileGroupName
    FROM sys.indexes i
    LEFT OUTER JOIN sys.index_columns ic
    ON i.object_id = ic.object_id
    AND i.index_id = ic.index_id
    LEFT OUTER JOIN sys.columns c
    ON ic.object_id = c.object_id
    AND ic.column_id = c.column_id
    INNER JOIN sys.objects o
    ON i.object_id = o.object_id
    AND o.type = 'U'
    AND i.type <> 0
    INNER JOIN sys.schemas s
    ON o.schema_id = s.schema_id
    INNER JOIN sys.filegroups f
    ON i.data_space_id = f.data_space_id
    ), idxrCTE AS (
    SELECT r.prefix, CAST(r.cols AS NVARCHAR(MAX)) AS cols, CAST(r.incCols AS NVARCHAR(MAX)) AS incCols, r.suffix, r.index_column_id, r.key_ordinal, fileGroupName
    FROM allIndx r
    WHERE index_column_id = 1
    UNION ALL
    SELECT o.prefix, COALESCE(r.cols,'') + COALESCE(', '+o.cols,''), COALESCE(r.incCols+', ','') + o.incCols, o.suffix, o.index_column_id, o.key_ordinal, o.fileGroupName
    FROM allIndx o
    INNER JOIN idxrCTE r
    ON o.prefix = r.prefix
    AND o.index_column_id - 1 = r.index_column_id
    SELECT 'CREATE TABLE ['+sName+'].[' + oName + '] ('+bText+') ON [' + fileGroupName +']'
    FROM rCTE r
    WHERE column_id = (SELECT MAX(column_id) FROM rCTE WHERE r.oName = oName)
    UNION ALL
    SELECT prefix + cols + CASE WHEN incCols IS NOT NULL THEN ') INCLUDE ('+incCols ELSE '' END + suffix+' ON [' + fileGroupName +']'
    FROM idxrCTE x
    WHERE index_column_id = (SELECT MAX(index_column_id) FROM idxrCTE WHERE x.prefix = prefix)

  • How to rename a column name in a table? Thanks first!

    I tried to drop a column age from table student by writing the
    following in the sql plus environment as :
    SQL> alter table student drop column age ;
    but I found the following error
    ORA-00905: &#32570;&#23569;&#20851;&#38190;&#23383; (Lack of Key word)
    I have oracle enterprise edition 8.0.5 installed at windows 2000
    thank you
    And I want to know how to rename a column name in a table?
    thanks

    In Oracle 8i, your syntax would have worked.  However, if I
    recall correctly, in Oracle 8.0, you can't rename or drop a
    column directly.  One way to get around that problem is to
    create another table based on a select statement from your
    original table, providing the new column name as an alias if you
    want to change the column name, or omitting that column from the
    select statement if you just want to drop it.  Then drop the
    original table.  Then re-create the original table based on a
    select statement from the other table.  Then you can drop the
    other table.  Here is an example:
    CREATE TABLE temporary_table_name
    AS
    SELECT age AS new_column_name,
           other_columns
    FROM   student
    DROP TABLE student
    CREATE TABLE student
    AS
    SELECT *
    FROM   temporary_table_name
    DROP TABLE temporary_table_name
    Something that you need to consider before doing this is
    dependencies.  You need to make a list of all your dependecies
    before you do this, so that you can re-create them afterwards. 
    If there are a lot of them, it might be worthwhile to do
    something else, like creating a view with an alias for the
    column or just providing an alias in a select.  It depends on
    what you need the different column name for.

  • How to get the column names of the table into the Dashboard prompt

    how to get the column names of the table into the Dashboard prompt
    Thanks & Regards
    Kishore P

    Hey john,
    My requirement is as follows
    I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
    My pivot table looks like this
    COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
    ---------------------------------------------------- JAN 2009          FEB 2009        MAR 2009
    RANK              REGION                  DOLLARS           DOLLARS        DOLLARS DOLLARS
    1 CENTRAL 10 20 30 40
    2 SOUTHERN 10 30 30 70
    3 EASTERN 20 20 20 60
    4 WESTERN 10 20 30 40
    When i select the District in column selector
    Report has to display rank based on Total Sales by District. i.e
    ------------------------------------------------- JAN 2009         FEB 2009       MAR 2009
    RANK             DISTRICT              DOLLARS           DOLLARS        DOLLARS DOLLARS
    for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
    so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
    do you have any solution for this?
    http://rapidshare.com/files/402337112/Presentation1.jpg.html
    Thanks & Regards
    Edited by: Kishore P on Jun 24, 2010 7:24 PM
    Edited by: Kishore P on Jun 24, 2010 7:28 PM

  • How do I restore column headings in Response table after accidently deleting them? Undo doesn't work.

    How do I restore column headings in Response table after accidently deleting them? Undo doesn't work (only seems to go back one level). I also have so many headings I won't be able to type them in manually!

    With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
    # close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
    # check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
    # if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
    # check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
    # At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
    # When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
    # Open Firefox. Mine opened up as desired.
    This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
    For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
    Hope that helps.

  • Hide or Delete Empty columns in dynamic internal table

    Hi,
                                I am having an dynamic internal table which contains more than 100 columns.
             I need to delete empty column from that table, can any one help this.

    Hello,
    If you are talking about ALV then you can just the the table for empty columns before populating fieldcataloge and hide the columns.
    If your query is still not answered please provide a detail requirement.

  • How can I modify data from a Transparent Table without ABAP code.

    Hi,All
    How can I modify data from a Transparent Table (like TCURR),  and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
    I had fond that there is a way can do that:
    1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
    2, type '/h' and let debugging on
    3, select one of this data then click 'Display',enter in debugging system.
    4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
    and, My system is ECC6.
    thank you all
    Edited by: xuehui li on Aug 20, 2008 6:30 PM

    Hello,
    Your approach (with Vijay's suggestion) MAY work.  However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT.  This will be especially true if you are working in a Production environment.  Vijay's other comment is true as well.  This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment.  The auditors will not be impressed.
    Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
    Regards
    Greg Kern

  • How can I transfer contacts from my Iphone to ipad without using a computer?

    How can I transfer contacts from my Iphone to ipad without using a computer?

    The easiest method is to setup an iCloud account, turn on Contacts syncing in Settings > iCloud on both devices, and the Contacts from the iPhone will sync to the iPad.

  • How do I transfer files from one computer to another without using cables??

    How do I transfer files from one computer to another without using cables?

    Wifi network
    Email
    Thumb Drive
    Online storage such as, iCloud Google Docs, SkyDrive, etc.

Maybe you are looking for