How to load program on pxie5641

I am new to labview.
I want to load (burn) labview program on NI PXIe 5641 card.How I can do this?
Pooja

First you should become familliar with LabVIEW, (Read the help, do the tutorials, take the on-line self-paced training....)
Then you will need to learn about the LabVIEW FPGA module that allows you to develop code to run on an FPGA target.
And then you sould be able to read about IF xcvrs and how to use LabVIEW to interact with them.
This really is a daunting task for a beginner... Consider working with an Alliance Partner to help with the learning curve and avoid common misconceptions about programming at this level.
Jeff

Similar Messages

How to load programs to run in vista mode?

I'm trying to load two programmes, Microsoft Office 2007, and perfect disk, and neither of them will load.
I remember reading somewhere on this message board, that you could load programs to run in vista mode, how do you do that?

Please post the exact error messages that you are getting when you are trying to load Office 2007. I've loaded it on several builds of Win 7 on several different machines without issue.
Are you using the Windows 7 Release candidate, and are you using a retail Office 2007 dvd?
Thanks
Message Edited by Darksaber on 06-19-2009 11:15 PM
x200 7454-CTO; 320GB HD; 4GB; Win 7 64bit - Now on RTM.
- 2nd SSD with Win 7 Enterprise RTM
T61p - RTM - Win 7 Enterprise
S10 4231 for my wife - now on Win 7 Ultimate RTM

Windows 7 users have no rights to load programs, but firefix loads. How?

We have lab computers and the users have no permissions to load programs. however, Firefox loaded. How is this possible?

Users can always use a portable Firefox version installed on an USB stick.
If you do not want users to have access to internet then you need to block that via a firewall or special proxy.
You can always rename files to circumvent measure that only look at file names.
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/

My new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

my new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

Wrong forums. Try http://answers.microsoft.com/en-us/mac

How to Load Photoshop 5.0 LE & other programs on PC with Windows 7?

I have had such a problem, but found the answer in here. Where there might be another
way that works at times, the only way I found was given by Financetech back in 2011.
His answer was the following:
"you can copy across an old XP installation.
On an XP machine copy the Photoshop 5.0 LE program folder from C:\Program\Adobe onto a USB stick. Then also copy the all the DLLs from C:\Windows (there are usually 6 or so), and also copy pcdlib32.dll from C:\Windows\system32.
On the Windows 7 machine copy the Photoshop 5.0 LE folder from the USB stick across to C;\Program Files and also drop all the DLLs into the Photoshop folder.
On the Windows 7 machine in the Photoshop folder right click on photosle.exe and choose Properties -
Compatibility tab and then choose "Run this program in compatibility mode for Windows XP (service pack 3).
John"
Well, after trying several other methods I had found, this one was the only way it worked. BUT .... it also worked
well on a program that was designed to be used in Windows for Workgroups, 3.11. Long before Win 95 came around.
That was the last 16 bit OS of Windows where a user had absolute control over his computer. DOS was NOT
inside Windows as it is today. DOS (being Disk Operating System that makes a PC work) was a separate loaded
program before Windows was installed. One could even fix his computer by going to DOS if his PC crashed and
would not let it open. In DOS the PC could be 'fixed'. Even some of the garbage that MS puts in their OS's could
be removed without causing harm to the OS. Today, if Windows doesn't come up, neither will the DOS.
Anyway, that old 16 bit program did load, and does work now in Windows 7 using the above method. Since XP was
a 32 bit OS, many 16 bit applications would load in it. Not all, but many. So, if your 16 bit program will load into
Win 95, 98, 2000, and XP, you can load it in Win 7.
I copied the instructions to keep on hand in a file so that I will be able to help others who do not get into this forum.
(Maybe also due to the fact that I forget a lot these days.)
Dave.

no, you don't have to remove those files.

How to load a properties from path that is relative to the classpath

Hello;
I need to load a set of properties from a propertie file from inside and EJB. I need to do so that I don't set the full absoulte path of the property file. In brief I don't want to be dependent on the file system struture instead I want to read the property file relatively to the package path name.
Here is my code:
package packagename.com;
import packagename.com.*;
import java.util.*;
import java.io.*;
public class PropDemo {
public static void main(String[] args) {
public static final String PROP_FILE_NAME
= "configuration.properties";
File inputFile = new File(PROP_FILE_NAME);
Properties prop = new Properties();
try {
FileInputStream fis = new FileInputStream(inputFile);
prop.load(fis);
} catch (Exception e) {
Any body have an idea how to so.
Regards
mal

I realize that you are trying to be a pain in the arseNot really. I know that I spent about a day figuring it out and that was after skirting around the issue for a about a year.
with that reply, but we can look here:
public void load(InputStream inStream) throws
IOExceptionReads a property list (key and element pairs) from the
input stream. The stream is assumed to be using the
ISO 8859-1 character encoding.
The original post suggests the author already knows how to load from a file. So this doesn't help at all.
And possibly GASP cross reference this entry in
Class:
public InputStream getResourceAsStream(String name)Finds a resource with a given name. This method
returns null if no resource with this name is found.
The rules for searching resources associated with a
given class are implemented by the defining class
loader of the class.
Now you may equivocate that the docs don't
specifically state that the classpath is where
resources are searched for, but I would maintain that
any Java developer worth anything should know this.Really? So where, in the above entry, does it explain the impact of the "/" character at the beginning of the string?
I know how classes are searched for. I know the impact of the class path. How that impacts a 'resource' is less clear. Particularily since the "/" character has nothing to do with loading classes.
>
This should be Java 101. Advanced Topics should be
something that affect people who have programmed Java
for years. (This is usually something that first year
programmers work out). If this is representitive of
the kinds of questions that qualify as "Advanced" then
this forum will become basically useless.So an opposing opinion...this is an advanced topic. Nothing in the java docs makes it clear. And it is even less clear the context of a container.

How to load a java card applet into a java card

Dear All,
I am a novice to java card technology..
I have done some search on how to load a java card applet into a smart card but haven't found a satisfactory answer. I have read about installer.jar and scriptgen tool but I want to load the applet from a java program and not from command line. It would be of great help if somebody can help me out.
If somebody can share a sample program which load a javacard applet(.CAP file) into a smart card, I will be very thankful.
I am able to find some client applications which help us send APDU commands and recieve response APDU's to interact with an applet loaded on to the smart card but not application which actually load the applet.
I have heard of OCF and GP.. some say that OCF technology is outdated and no longer in use.. can somebosy throw some light on this too..
cheers,
ganesh

hi siavash,
thanks for the quick response.. i checked out GPShell as suggested, it looked like a tool by which one can load an applet on to card and send some sample apdu commands... but I want to load the applet from the code.
My application should look something like this.. it will be a swing applicaton where I have a drop down with a list of readers, I select the one desired and then click on "LOAD" after inserting a blank java card, at this point my applet which is stored in my DB should get loaded on to the java card. The next step should be to personalize it where I enter the values for the static variables of my applet and click "PERSONALIZE", at this point all these values should be embedded into APDU commands and sent to the java card for processing.
For achieving this I am yet to find a comprehensive sample or documentation on the net.
Please help...
regards,
ganesh

. I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

Hello:
I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
Please Help
maxsdad

B-Rock:
Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
I was able to encode 5 full length music videos, but the results were distorted (video and audio).
I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
Thanks again for all your help.
maxsdad

How to load .wav files in LabView and vi for TDM,FDM,QPSK,ASK

Hello
I am doing my project in LabVIEW that is VIRTUAL TELEPHONE COMMUNICATION SYSTEM
AND APPLICATION OF LABVIEW IN ADVANCE COMMUNICATION TECHNIQUES.I have implemented every block till date but for the rest part of my project that is advance communication techniques i need vi for QPSK,TDM,FDM,ASK and I just wanted to know how to load .wav file in LabVIEW
Please assist me for this
Attachments:
Telephone communication process.docx ‏25 KB

Hi Dilpreet,
reading wav files is easy using the functions from the sounds palette...
For your other tasks you could use a seperate toolkit or do some programming on your own!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to load stocks for the months prior to initialization ?

Hello,
We load a cube stock from 3 ODS for BF,BX and UM extractors.
We are in a monthly snapshot scenario(we have read the specific how to but we must use 3 ODS one for each datasource because of data integrity (strong customer architecture contrainst).
For opening stock and the future month the solution is ok.
How to load the data for the 12 month prior the loading of opening stock ?
Specific datasources, full loading ?
Thanks to share our experiences
Best regards
Christophe

your previous months closing stock becomes opening stock for current month. Try the infostructure S039,this holds the closing stock of each month. You can populate this infostructure with program rmbs039. create a generic data source on this and populate opening and closing stock for each month.

How to load images from css file in JavaFX 8

I have this css file which loads images in JavaFX 8 application:
#pill-left {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/left-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-left:selected { -fx-border-image-source: url("/com/dx57dc/images/left-btn-selected.png"); }
#pill-left .label {
    -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-left:selected .label {
    /* -fx-text-fill: black; */
    -fx-text-fill: white;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-center {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/center-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-center:selected { -fx-border-image-source: url("/com/dx57dc/images/center-btn-selected.png"); }
#pill-center .label {
    -fx-text-fill: #d3d3d3;
     -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-center:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-right {
    -fx-padding: 5;
    -fx-border-image-source: url("/com/dx57dc/images/right-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
     -fx-border-image-repeat: stretch;
    -fx-background-color: null !important;
#pill-right:selected { -fx-border-image-source: url("/com/dx57dc/images/right-btn-selected.png"); }
#pill-right .label {
     -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-right:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
The images are located at the Java package com.dx57dc.images
In Java 7_25 this code works as expected but in JavaFX 8 b99 I get this error:
ava.lang.NullPointerException
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1129)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.tk.quantum.ViewPainter.doPaint(ViewPainter.java:99)
at com.sun.javafx.tk.quantum.AbstractPainter.paintImpl(AbstractPainter.java:210)
at com.sun.javafx.tk.quantum.PresentingPainter.run(PresentingPainter.java:95)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
at com.sun.javafx.tk.RenderJob.run(RenderJob.java:58)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.run(QuantumRenderer.java:129)
at java.lang.Thread.run(Thread.java:724)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
What is the proper way to load images from css in Java 8?
Ref
How to load images from css file in JavaFX 8 - Stack Overflow

There is nothing special to do - you execute the statement from your program just like any other SQL statement. The only thing to be aware of are the privilege/permission issues:
When loading from a file on a client computer:
READ CLIENT FILE privilege is also required for the database user.
Read privileges are required on the directory being read from.
The allow_read_client_file database option must be enabled.
The read_client_file secure feature must be enabled.
Revoking these privileges is also the only way you can prevent a user from executing the statement.

How to load data from MS Excel file

Hello All,
Please help me regarding:
how to load data/ insert records from MS Excel spreadsheet into Oracle table without converting that MS Excel file into CSV.
Thank You in advance.

Vivek More wrote:
how to load data/ insert records from MS Excel spreadsheet into Oracle table without converting that MS Excel file into CSV.Setup HS connectivity:
1. Create ODBC SYSTEM DSN using Microsift Excel driver(xls) and select your excel file as workbook.
2. Create file initXLS.ora in %ORACLE_HOME%\hs\admin directory contailing the following line:
HS_FDS_CONNECT_INFO = XLS3. Modify listener.ora file in %ORACLE_HOME%\network\admin directory and add the following lines to SID_LIST under SID_LIST_LISTENER
    (SID_DESC =
      (SID_NAME = XLS)
      (ORACLE_HOME = your-oracle-home)
      (PROGRAM = hsodbc)
    )4. Modify tnsnames.ora file in %ORACLE_HOME%\network\admin directory and add the following lines:
XLS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SID = XLS)
    (HS=OK)
)5. Restart listener.
6. Create database link (public or private depending on your needs):
CREATE PUBLIC DATABASE LINK XLS USING 'XLS';7. Now you are all set. For example my file has:
NAME
SAM
JOEDefault sheet name "Sheet1$" is treated as table name (Since excel is case sensitive you need to use quoted name). First row is treated as column name. And select:
SQL> select * from "Sheet1$"@xls;
NAME
SAM
JOE
SQL> Now if you do not know excel sheet names you can issue (I renamed excel sheet Sheet1$ to Names$):
SQL> select table_name from all_tables@xls;
TABLE_NAME
Names$
Sheet2$
Sheet3$
SQL> select column_name from all_tab_columns@xls where table_name = 'Names$';
COLUMN_NAME
NAME
SQL> SY.

How do I program the preloader in a fluid swf from another fluid swf?

I have built a fluid swf(preloader.swf) which is like an intro-cum-preloader screen to a flash site which is stored in main.swf. How do I program the preloader.swf to show the preload percentage of main.swf ?
All the swf files used here are fluid,so there is an actionscript file which loads the movieclips onto stage dynamically,please give me a solution to this keeping this in mind. Please do ask for clarifications if needed.

You want to use the Loader class in Actionscript 3. If you look at the example in the online help, you'll see that there are, among others, a progress event and a complete event. You can use this progress event, to track the progress of the loading of the file. The complete event occurs when the file has completely loaded.
Have a look at this: http://help.adobe.com/en_US/ActionScript/3.0_UsingComponentsAS3/WS5b3ccc516d4fbf351e63e3d1 18a9c65b32-7fa4.html it explains how to use a Progress Bar component to show the loading of a file.

Cannot load program R3SETUP(SAP R/3 46C) on AIX 5.3

While installing SAP R/3 4.6C(64 bit) on AIX 5.3(64 bit OS) we are unable to run R3SETUP file
our Database is Oracle 8.1.7
we are getting following ERROR :
exec(): 0509-036 cannot load program R3SETUP because of the following error:
exec(): 0509-124The program is a discontinued 64-BIT object file
Please HELP ASAP!!!!!!!!
Regards,
Gayathri.

Hi,
Thanks for the INPUTS.
Based on your inputs, came to know from service market (PAM) that Oracle 8.1.7 is not supported on AIX 5.3.
Our Current setup is SAP R/3 46C Oracle 8.1.7 on Solaris 8. For SAP Upgrade we have planned for IBM AIX 5.3 for ECC6.0 .
Kindly suggest in detail how to go about for Migration of SAP 46C from Solaris to AIX and Upgrade from SAP R/3 46C to ECC 6.0 on Oracle Database
Please suggest at the earliest.
Thanks a TON in advance
Regards,
Gayathri

Create_dynamic_table - error "Load program not found"

Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error          LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?

Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
    APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
    APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
    APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
    CLEAR wa_it_fldcat.
    wa_it_fldcat-fieldname = w_excel-value .
    wa_it_fldcat-datatype = 'C'.
    wa_it_fldcat-inttype = wa_details-type_kind.
    wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
    APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander

How to load program on pxie5641

Similar Messages

Maybe you are looking for