How to load the assembly that is not in "Bin" directory ?

In my asp.net application,I want to locate some assemblies into "MyView or MyModel" directory that is under the root directory.
But asp.net application load assembly that is in the "Bin" directory.
What should I do?

I would tend to disagree with separating assemblies into subfolders based upon their contents (views, models, etc). If these were different "addins" for an existing application then I could see more of a use. If you do need to store assemblies
in subdirectories of the application root (Bin) then you need to tell the loader that they exist by adding their path to the
probe path
in your config file. In my experience this isn't really a good idea unless you really, really need to separate assemblies. You'll start running into problems including incorrect assembly loading as you start adding dependencies that are shared
across projects (but aren't deployed to the root. It just gets ugly.
Michael Taylor
http://msmvps.com/blogs/p3net

Similar Messages

How to remove the bufgs that are not being used

Hi,
I have a IP block that has BUFGs that may or may not be used depending on which design the IP block is used. If they are not used I would like them to be removed but the tools are not consistent, sometimes they remove them and sometimes they do not.
How do I specifically tell Vivado to remove a BUFG in the .XDC file?
I've seen someone suggest to use the following attribute in the VHDL file but I need something in the XDC file
attribute buffer_type of drck_i : signal is "none";
Thank you,
Luis

Hi
If the BUFG instance is instantiated in the IP or your design then the buffer_type attribute will not work.
The opt_design trims the unconnected instances during implementation. Ensure that the BUFG does not have DONT_TOUCH property set on it which might affect trimming.
Thanks,
Deepika.

How to Find the Queries that are not hitting the indexes..

Guys,
Hope you all doin well.
Would you guys please tell me any view , or any resource that can help me to identify those SQL Statements that are not hitting the indexes properly, Causing the system to slow down at peak times.
Thanks
Rgrds
Y.Vo.

any resource that can help me to identify those SQL Statements that are not hitting the indexes properlyInteresting ! Is there any specific reason of looking only for those queries, which are not making proper use of indexes.
hare krishna
Alok

Tzupdater.How it reflects the users that are not using the new USA DST rule

If I update the JRE with tzupdater or just replace it with newer JRE will the time change according to the time zone I live in because I think that the changes in USA DST will not apply for the most of the other countries.

Hi,
You can do this directly in OAM, with option "a" (using auxiliary object class). You configure OAM to use the main person object class (inetorgperson) and then you can associate extra auxiliary object classes to it - and header variables can be set from any of the attributes that are in the user's profile, both main and auxiliary.
Regards,
Colin

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

    I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
    So cross check both of these, in my case the assembly name was fine,
<Action
    Name="Move Item to Another List and Send Email"
    ClassName="MyAssemblyName.Classname"
    Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
    AppliesTo="all"
    Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them.

How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them before updating.

Thanks. This seems to have worked easily.

I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

How do I get ringtones that are not listed in the phone

how do I get ringtones that are not on the phone's list?

Thanks so much for providing that information sidmorgy. There are options available to do a media retrieval that may provide help with retrieving available ring tones that were previously purchased. You can access the steps here http://vz.to/102YOjg to see if that option will work for you. Please keep us posted on the outcome.
CandiceH_VZW
Follow us on Twitter @VZWSupport

How do I delete places in the organizer that are not being used?

In Elements Organizer 12, I think I accidentally created a "place" on the map that I do not want to apply to any photos. When I try to do conduct an advanced search, the place is appearing as a checkbox. I do not want this place to show up in the search field, as we have never been there. How do I remove places that are not associated with any photos?

If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228

HT5622 If I have two emails for my iMessage how can I see or receive my msj or the email that is not the primary email

If I have two emails for my iMessage how can I see or receive my msj or the email that is not the primary email

It's basically ment for iMessage and FaceTime. I might be wrong but this can only be done between two Apple products that allow this function. You won't receive an email if I sent you an iMessage to a secondary email you use for iMessages. You would only receive a text message. Now if someone using a PC sent an email to the secondary email you use you will receive an email not a text message. The secondary email is used basically if you do not have a data plan and you're connected to wifi you can still send iMessages using those emails you provided.

How to select all the people that are not in any equipe ?

Hi,
I have a nice SQL expression that gives me as a result all the "AGENTS" (people) that are working in an EQUIPE (a team)
select a."AGENT_ID",
a."NOM" || ' ' || a."PRENOM" "Nom",
c.libelle "Equipe",
a."DATE_EMBAUCHE" "Date embauche",
a."DATE_DEBAUCHE" "Date débauche"
from OBSERVATOIRE."AGENT" a,
observatoire.equipe_agents b,
observatoire.equipe c
where a.agent_id = b.agent_id
and b.equipe_id = c.equipe_id
order by nom
Now, how to select all the agents that are NOT working in any "EQUIPE" (team) ?
I have tried but could not succeed !
Thank you for your kind help.
Christian

Christian from France wrote:
It is not working because the table EQUIPE_AGENTS does not contains a row if the agent is not into any equipe.
CREATE TABLE "OBSERVATOIRE"."EQUIPE_AGENTS"
(     "EQUIPE_AGENTS_ID" NUMBER NOT NULL ENABLE,
     "EQUIPE_ID" NUMBER NOT NULL ENABLE,
     "AGENT_ID" NUMBER NOT NULL ENABLE)
CREATE TABLE "OBSERVATOIRE"."AGENT"
(     "AGENT_ID" NUMBER NOT NULL ENABLE,
     "GRADES_ID" NUMBER NOT NULL ENABLE,
     "NOM" VARCHAR2(50 BYTE) NOT NULL ENABLE,
     "PRENOM" VARCHAR2(50 BYTE),
     "DATE_EMBAUCHE" DATE NOT NULL ENABLE,
     "DATE_DEBAUCHE" DATE)
The only way to "know" if an agent is not into any equipe (team) is to search into the EQUIPE_AGENTS table, and if we do not find the ID of the agent into this table, then we know that this agent is not into any EQUIPE (team).
I don't know ho to translate this into SQL.And that's what my query does. It uses an OUTER JOIN so that a result record is returned whether or not there is a record in EQUIPE_AGENTS. And the check for EQUIPE_ID is NULL restricts the result set to those where there IS NOT a record in EQUIPE_AGENTS.
A more traditional way would be to use NOT IN or NOT EXISTS clauses, but they can prove inefficient.

How do I find all of the photos that do NOT contain a specific person tag?

I am scanning my old photos and slides and organizing them with Photoshop Elements 12. I have recently started taging the pictures with family names. I see from this forum that I can search for untagged pictures but how can I find all the pictures that do NOT contain the "Smith" family tag but might contain the "Jones" family tag? Some pictures will be marked with more than one family name. The "Find by Details" option defaults to "includes" for keywords and people. There is no way to set it to "not includes".
I am running PSE12 on Windows 7 Professional on a Dell XPS desktop.
Thanks for any suggestions.
Don K.

See the online help:
http://helpx.adobe.com/elements-organizer/using/finding-media-files-keyword-tags.html#excl ude_media_files_from_a_search
The workaround is often to create a temporary tag for pictures not having a given keyword. Even with a very big catalog, tagging nearly all images is astonishly quick. You select based on the keyword, then use the option to show 'non matching' items, and assign them another (negative) keyword.

I do not know how to get the music that I buy on itunes, on my mac, onto an ipod. I have already authorized my computer and "downloaded" my music, but that did not do anything. Please I really need to know how to do this on my own but I am stuck.Thank you

I do not know how to get the music that I buy on itunes, on my mac, onto an ipod. I have already authorized my computer and "downloaded" my music, but that did not do anything, or provid the results that I was expecting, at least. Please, I really need to know how to do this on my own but I do not know what to do.Thank you in advance to anyone that is answering this question that I know most everyone but me knows how to accomplish. thanks!!!

In iTunes go to the Help menu in the upper menu bar. Then click on iTunes Help. Then on Sync your iPod, iPhone or iPad and follow the instructions.

Hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

Use the backup you have of the old computer and restore that data to the new computer. Also and backups that you have made of your iTunes library (it has a method to back it up as well) can be copied back over to the new computer. If you attempt to sync the phone to the new computer without the data, it will delete that data from the phone. The iPhone is not designed as a storage/backup device and as such will not sync music from itself to a new computer.
If by chance you had not been backing up the computer and/or iTunes, you can google for some third party software, such as Touchcopy that will do some of what you are asking.

How to load the assembly that is not in "Bin" directory ?

Similar Messages

Maybe you are looking for