How to load the nvidia module with options?

Hello!
I'm testing around to find the perfect configuration for my nvdia agp card.
The gentoo wiki told me to active FastWrites and SBA. These are options for the nvidia module, but I don't in which config file the options must written. In Gentoo:
File: /etc/module.d/nvidia
The String "options NVdriver NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1"
But in arch there isn't a directory "module.d"
Thanks for help
Best regards,
Flasher

Use /etc/modprobe.conf.
man modprobe.conf
Last edited by lucke (2007-12-16 15:25:30)

Similar Messages

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

"Failed to load the NVIDIA kernel module" [SOLVED]

Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)

karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)."

Unable to load the kernel module 'nvidia.ko' [SOLVED]

After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)

if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01)

[SOLVED] Loading Kernel Modules with Options

Hi,
I am trying to load the nf_conntrack_ftp kernel module on boot. I followed the Arch Wiki's article on kernel module loading [0] and created a file in /etc/modules-load.d/ called nf_conntrack_ftp.conf:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
This loads the nf_conntrack_ftp module on boot just fine; unfortunately the module uses the default FTP port (21) and I need it to run on a different port (6621). When I try to dynamically load nf_conntrack_ftp using modprobe nf_conntrack_ftp ports=6621 it loads just fine and according to systools has the port set correctly. However, if I try to set the port anywhere in /etc/modules-load.d/ I always get an error message during boot saying:
Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details.
Looking at the systemctl status message as recommended by the error message on boot doesn't yield anything useful:
systemctl status systemd-modules-load.service wrote:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Sun 2014-02-09 16:46:13 EST; 11min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 287 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 287 (code=exited, status=1/FAILURE)
Feb 09 16:46:13 babylon5 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Feb 09 16:46:13 babylon5 systemd[1]: Failed to start Load Kernel Modules.
Feb 09 16:46:13 babylon5 systemd[1]: Unit systemd-modules-load.service entered failed state.
I have tried to set the "ports=6621" module option in multiple ways ...
1. As part of the same nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:
# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
options nf_conntrack_ftp ports=6621
2. As a separate test.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
/etc/modules-load.d/test.conf wrote:options nf_conntrack_ftp ports=6621
3. I even tried just adding "ports=6621" to the end of the nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp ports=6621
None of these worked. The moment there is "options nf_conntrack_ftp ports=6621" in any file in /etc/modules-load.d/ I get the error message on boot and the kernel module won't get loaded.
What am I missing / doing wrong? Is it not possible to set kernel module parameters on boot? Does nf_conntrack_ftp need to be loaded by the initramfs, i.e. do I need to add the modconf hook to my /etc/mkinitcpio.conf?
Thanks,
Marek
[0] https://wiki.archlinux.org/index.php/Kernel_modules
Last edited by marco1475 (2014-02-09 22:54:26)

Raynman wrote:
marco1475 wrote:[0] https://wiki.archlinux.org/index.php/Kernel_modules
Read this again, specifically the section about setting options, paying close attention to directory names.
D'oh! Thanks for pointing that out, what a stupid oversight on my part:
The files that tell the system which kernel modules to load go into /etc/modules-load.d/.
The files that tell the system which parameters to pass to the kernel modules when loading them go into /etc/modprobe.d/.
Now that each file is where it belongs everything works.

How to use the function module ....

hi
how to use the function module ssf_function_module_name in smartforms

Hi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

Can't get the nvidia module to work.

Hi,
I just moved a machine from debian to archlinux due to the newer packages. Anyways, since yesterday I have been trying to get the nvidia module to work but haven't had no luck. Basically I get a black screen once I run startx and afterwards I can't switch back to any of the consoles. The system doesn't hang because I can SSH into it from another machine and do whatever. Killing all the x-related processes doesn't recover the screen, only restarting the computer gets the ttys back.
I have tried several different nvidia module versions include 1.0-7664, 1.0-7174 and 1.0-6229. I have also the stock 2.6.11.10 kernel and a custom compiled 2.6.11.11 kernel. If that wasn't enough I have tried the xorg generated xorg.conf file and the hwd generated xorg.conf file. Below is what I am running.
xorg 11R6.8.2-2
eVGA nVidia GeForce FX5200 (The LCD is connected through the regular VGA port)
xorg.conf: http://68.190.122.245:9696/temp/xorg.conf
Xorg.0.log: http://68.190.122.245:9696/temp/Xorg.0.log
nvidia-installer.log: http://68.190.122.245:9696/temp/nvidia-installer.log
`hwd -s` output: http://68.190.122.245:9696/temp/hwd_s.txt
Any help is really appreciated!

Nice to see logs and confs posted
just to be sure we are singing from the same hymnbook, have you:
-- followed the wiki info as your logs show the DRI section still intact (bottom of xorg.conf)
and from wiki,
-- installed nvidia via pacman, with X server shut down. and then modified xorg.conf accordingly.
# Auto-generated by Archie mkxcfg
? Archie ?
-- following the kernel upgrade did you then run pacman -S nvidia, as above, to incorporate it with the new kernel ?
other tidbits
maybe try backing up xorg.conf first and then removing redundant lines #'s etc to make your config file more readable, and 1, 4, 15 bit resolution entries too.
The last time i had the blackscreen was in Fedora, it was mentioned that a kernel patch by fedora, was fouling the nvidia drivers. So i blamed fedora, chipsets, patches, drivers, witchcraft etc. Swapped to arch , followed the WIKI destructions and all worked ok. so im sure it can be solved here too.
FWIW my xorg.conf can be found here if you want something to refer to. in the interests of jurisprudence, copy/modify at your own risk. i cant/wont pay for fried monitors
incidentally nv in the Section did work for me instead of nvidia but was no real solution as i wanted to use GL and it wouldnt work with it, just runs a generic vga driver and not the nvidia one.
persevere dude, and good luck.

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to test the SAP modules like SD and MM By using Quality Center and QTP

Hi Experts,
How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
Regards,
Skumar.

Hi Sampath,
First install QTP and SAP Addin with in QTP.
2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
Once recording is done QTP will create a script in VB
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SAPGuiOKCode("OKCode").Set "/nVA01"
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SendKey ENTER
you can always add a parameter and other customization according to your requirement.
Let me know if you need more information regarding this.
Good Luck!

How to map the bulk users with the required roles in portal at one time

Hi,
Would anyone tell me how to map the bulk users with the required roles in portal at one time?

Thanks for all the reply.
<b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
I tried the first option like
[group]
gid=
gdesc=
user=
Thr problem with this is I could n't put more no of users in the notepad.
I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
I tried creating seperate notepad but in Import it says "exists"
I'm not sure about LDAP. Would anyone explain me the best approach to do this.

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

How to change the source module version

Hi All,
In the OWB i created a source module and during those steps i clicked on version 10.1, but during deployment in the deployment managaer when i tried to register the location, its giving me an error as "Source verison 10.1 is not matching with the target version 10.2", can any one please help me or Advice me as to how to change the "source module version"?
Thanks

Hi
what i understood is that the source module is associate with the location and you have provided the 10.1 which you need to change.
so you can change that under location.
Cheers
Nawneet

How to load the nvidia module with options?

Similar Messages

Maybe you are looking for